Subcompact Light Bearing Holsters (FAQs!) All You Need to Know About Light Bearing Holsters

[@RTTGunsGear]

Great video and explanations. To me this is all obvious information, but videos like this are needed for the ever growing influx of new shooters. Good stuff.

[@Strawman333]

I agree. When it comes to firearms, the training, safety etc. it’s mostly common sense. However, I’m astounded by the amount of people who do not possess basic knowledge. So it’s very important that new gun owners are educated so they don’t make us look bad! Lol

[@WerkzHolsters]

Thanks much. I'm considering walking through concealed carry basics for folks as well. Agree we have a bunch of people out there who are looking to be educated on the things that many of us have taken for granted. Much of this video is addressing questions our customer service team gets, so I know the questions are on people's minds.

[@OBZ74]

Just ordered mine, I can’t wait to try it out

[@c-note4146]

love the clarity found in your presentation, great vid. hope to see werkz start working more with designs suitable for in conjunction with phlster enigma

[@WerkzHolsters]

That's another good video idea -- how to adapt Werkz gear to the Enigma. Thanks for the suggestion!

[@c-note4146]

@@WerkzHolsters Yes please! Not having the enigma on hand, but having already acquired a Werkz holster (love it, btw), I’ve been contemplating how I would go about fitting one. But I haven’t concluded anything solid yet. I would find a video like that very useful. Fingers crossed you present ideas for each of the three most popular (365, 43mos, H.cat)..can’t wait to see that video (if you go through with it). Thanks for all you and the team are doing over there.

[@squidly1117]

Just got my Werx holster for my Glock 48 mos with TLR-7x Sub and it's amazing!

[@8BloodyKnuckles]

Always great info. Glad to see you’re still making these videos.

[@WerkzHolsters]

We have lots of content queued up... thanks for the encouragement!

[@Christian-yt5df]

I was just researching these exact questions about their holsters and Werkz dropped this video today haha 👏🏼 I’m sold.. we appreciate your well informative videos sir. Thank you

[@WerkzHolsters]

I'm thankful that I could help!

[@vironpayne3405]

I am no holster expert, but I am glad my 2nd holster and first hard holster was a Werkz M6 IWB. It fits my S&W M&P 2.0 with an Olight baldr s and Holosun SCS perfectly. The only thing I may do is look for a longer claw. At 5'8" and 235lb I tend to push the holster down when I sit and the claw tends to push below my belt. I wear my holster in the lowest position already for comfort and concealment. I can't fault the holster for my physique aka dun lapper pushing my pistol down. The retention is perfect. The comfort is very good. The concealment is very good. I did a VNSH holster first for comfort, but I didn't feel comfortable reholstering, except with a thumb safety on. I still use a thumb safety for reholstering, but I would reholster a pistol without a thumb safety into the M6. Not the VNSH.

[@Zircon10]

Excellent, informative, instructional presentation, Shan!

[@WerkzHolsters]

It is my hope that it some useful information for both those new to carrying with a light as well as those of us who have been carrying for a while. Thanks!

[@RawwwDawgg215]

Thanks for that awesome m&p 2.0 compact holster, still learning my cant adjustments, etc

[@Mgarcia3160]

I have a Werkz IWB for my 43x with a Nightstick TSM-11G. Love it. Fits great and comfortably. Also have one for my 19 with a Nightstick. I recommend them to anybody that asks.

[@WerkzHolsters]

Thanks much for your encouraging feedback Michael!

[@tonyjay617]

How are you liking the Nightstick TSM? I just ordered one for my Sig p365 along with the Werkz M6 holster.

[@Mgarcia3160]

@@tonyjay617 I like it, I don't use the laser much though, it tends to shift when you push the button to turn it on. Tried tightening it, but still wiggles side to side. As for the holster, love it. My 43x stay securely in place. Also got a Werks for G19

[@tonyjay617]

@@Mgarcia3160 That's fine. I don't need the laser. I just wanted a small light to put on the Sig and I saw Werkz made a holster for that light/pistol combo. Glad you like yours. Can't wait to try mine out!

[@RipALipMatt]

I ordered a holster from werkz man i was very nervous about it but as soon as i got my holster in the mail i would very recommend werkz best holster ive ever had or held in my hand solid not heavy custom carry for deep carry it has everything best holster ever GET YOU ONE!!!!!!!!

[@WerkzHolsters]

Thanks much Matthew for your enthusiastic endorsement!

[@jimchin2619]

You guys are my go-to company for aiwb light bearing holsters. Just wish you will have a cz p-01 with tlr7-a combo soon.

[@Libertarian_Neighbor]

I’ve modified every holster I’ve ever purchased. I really like my new Werx 43x MOS/TLR Sub. You’ve fixed a lot of common problems. That said, I’ve already ordered some different claws bc the Werx claw doesn’t work well enough for me. Also, the mag caddy could be more adjustable. I custom made a flex point and a custom low profile clip. The flex point allows me to position the mag a little wider and not affect the effectiveness of the claw. Lastly, I swapped out the main holster clip for a wider one that is easier to operate and provides more stability.

[@WerkzHolsters]

Hey Neighbor! We have 2 new claw molds in development. Can you tell me what specifically isn't working well for you? Agree that the mag could have some flex. As for the clip, I wasn't aware there were any others out there that were wider. Would love to see a pic if you get time... send to our customer service products (at) werkz.com. I'm always looking for great ideas on how people run their gear!

[@Libertarian_Neighbor]

@@WerkzHolsters Claws that are positioned further from the holster create more tilt of the pistol grip when you cinch your belt. I’m a skinnier guy, so I prefer to have the grip closer for better concealment. The clip is wider at the base, not overall. It has more contact area to manipulate and has more surface area to reduce movement.

[@Libertarian_Neighbor]

@@WerkzHolsters For all my nitpicking, your holster is one of the very best I have owned. I like how customizable it is out of the box and the built in wedge and G48 length is spot on. I started ordering my micro compact holsters in the long slide versions after realizing the issue.

[@Strawman333]

@@Libertarian_Neighbor I assume, that you wear a good belt for carrying. It’s essential.

[@Libertarian_Neighbor]

@@Strawman333 I’ve tried many belts. I like the Ares Gear Aegis. It’s what I wear.

[@1olddirtroad]

Great Video! 12:29 Will the "Alias" system work with any of your SIG XMACRO holsters? I understand the cost of making specific holsters with so many combinations. It would be interesting to narrow down the 3 most purchased pistols and requested holster/light combo. If my area is any indication the SIG 365 and SIG XMacro series and Glock 19 are the fast movers to supply.

[@BTVDeusVult]

SOLID. I’ve been digging the videos and comprehensive review - I mean, MAN, comprehensive. I’m going to be in the market for one of these holsters soon. I’m SOLD. 💪🇺🇸

[@WerkzHolsters]

I'm glad you like our videos Bryan! Trying to be informative so folks can make an informed decision, whether buying a light, or buying a holster.

[@ROOSTER-ql5fs]

Just got my M6 for the 43x MOS with the TLR 7 sub. Although there is no click when inserting the gun the gun is more than secure enough right out of the bag.

[@WerkzHolsters]

Thanks for the feedback! That "sub" is super difficult to get a click without having too much retention. I honestly don't know how many molds we rejected working to get the balance between click and retention to the best compromise spot. Thanks much!

[@ROOSTER-ql5fs]

Yes the click is very satisfying but ultimately retention is what’s important. For anyone asking, there is plenty of that to go around!

[@arikjohnson412]

New sub and new customer if all goes well today picking up both your M6+M7 for my P320xValkyrie system(s). The Flux Raider got me interested in the P320 and now I’m like a little kid with a Lego addiction, so finding a carry system that embraces Olight’s system has been a bit of a struggle. I’ll give y’all a shoutout in my order comments later 🙏🔥🙌🎈

[@fragout9575]

Any development in the "Werkz" to be adaptable to Phlster Enigma Concealment? Of all the holsters I've tried, yours has been hands down, best for my needs! I just received my second holster for my Sig Sauer P320!

[@believe722]

👍 Do you make any type of clip for OWB to tuck a shirt?

[@blasianboomboom2006]

Great video. But your website doesn’t offer holsters for Canik firearms.

[@WerkzHolsters]

Not at this time. Canik is on our potential list though!

[@mpbclutch33]

Wish you guys made one for the shield plus, recover tactical and tlr7-sub

[@mynameismyname5124]

Hey werkz? Why do you advertise a cut out for charging for a baldr mini, but do not have an option to choose it on your website?

[@WerkzHolsters]

That's because all our Baldr Mini holsters (indeed, all holsters for Olights with that recharge capability) come standard with the capability to charge in holster. The capability is built in to the design, allowing you to put the pendant in from the rear under the trigger guard. Thanks for asking!

[@lightwaters]

I have a bul armory sas 2 3.25 comp with a viridian light, laser and cam which holster will you reccomend

[@keeganjacobs5913]

great video , thank you so much. I have a 2011 staccato c2 , frame and trigger guard area are thin and i am able to stick a finger in the trigger which i always thought it was a bad holster but i see there has to be a gap with light mounted holsters. Plus the firearm has a thumb and grip safety which should be fine, thank you.

[@WerkzHolsters]

I'm glad it was helpful Keegan! We have a Staccato here in the shop as well -- nice choice of pistol!

[@keeganjacobs5913]

@@WerkzHolsters does your shop make staccato with light holsters ?

[@WerkzHolsters]

@@keeganjacobs5913 We have a Staccato XC in house and are looking at building holsters for those 2011s with lights. I don't have a timeframe for release however.

[@keeganjacobs5913]

@@WerkzHolsters thank you , I was hoping a C2 since that is my EDC but hopefully sometime in the future . Thank you

[@WerkzHolsters]

@@keeganjacobs5913 The holsters we make will fit all the current Staccato pistols. Their slide and frame profiles are the same.

[@EOTechN9ne]

Are there any safety concerns when carrying with a wider trigger guard area on the holster to accommodate light bearing pistols?

[@WerkzHolsters]

Good question. I would say that the same safety concerns exist as with all pistols -- you don't want something to manipulate the trigger inadvertently. This is true for a light bearing holster. It's also true for non-light-bearing floppy nylon holsters, sticky holsters, "worn in" leather holsters, and even the professional level leather holsters. The bigger the light, the more opening there is. Light have become common among professionals -- local PD, SWAT, military, federal, and even your local Sheriff department probably has guys using lights. Those professionals are probably running a X300 or TLR-1HL and a Safariland holster. You can get a lot of stuff in the holster opening, including even seat belt buckles. I think it's a matter of being aware that the potential exist and mitigating it. Be aware of stuff that could get in the holster -- whether you're drawing, reholstering, or at rest. Note that non-light bearing holsters are at risk during drawing and reholstering. And for those who cannot get used to the idea of seeing the trigger, then perhaps you should consider not running a light.

[@helsindemisquisfolson1461]

Great product love my holster asoon I upgrade expect to see an order from me 😎

[@WerkzHolsters]

Thanks for the positive feedback and continued business!

[@scottgaskin8574]

I need one for a canik mete sft pro

[@HowardRoarkBR]

Any chance you guys will be making holsters for IWI Masada eventually?

[@WerkzHolsters]

TBH it's unlikely. We have a lot of other pistols that are requested much more frequently...

[@JordanJimmyDavison]

Dang I bet workz is just going crazy trying keep up with all the pistol/light combos!

[@WerkzHolsters]

We try to cover a lot, but there are a ton left for us to build!

[@CRASS2047]

I just got my M6. I’m a big guy, 6’2 290 lbs. I don’t have a huge gut, but I have a little bit of a gut. The sweat guard is jabbing the bottom of my muffin top. I want to carry appendix, but it’s way to uncomfortable. Any tips would be appreciated. I love the holster, it’s just my body that is the problem

[@WerkzHolsters]

If the sweat shield is a problem, simply remove it. I don't know if our old video showing how to do it is still up, but simply hit it with a razor knife where you want it cut, twist it off, then polish the remaining holster material with sandpaper or a buffing wheel. Hope that helps!

[@90whatever]

Chunkier guys with BMI over 30 tend to struggle with AIW carry. Tough to be comfortable and especially to reholster.

[@williammicou5757]

I have a glock20 gen 4,10mm, with a TLR-1 streamlight on it. Is there anything available for this weapon 🤔?

[@WerkzHolsters]

Not at this time, but we plan to work on that soon.

[@dbmathis]

I wanted to share some feedback and a support request regarding my recent experience using the M6 holster with the P365 firearm and TLR-7 Sub light attachment. Safety Concern: I've noticed that it's possible to pull the trigger while the gun is still holstered. This is a significant safety concern for me, regardless of what you say in this video. Fit and Security: The gun and light attachment do not securely snap into the holster as expected. This raises concerns about the reliability of the holster during use. Customer Service Inquiry: I submitted a Return Merchandise Authorization (RMA) for both the gun and the light four days ago but haven't received any response. I'm eager to resolve these issues and would appreciate an update on the status of my RMA request. I look forward to your prompt response and assistance in addressing these concerns.

[@johnwilliams4666]

I have a shadow systems cr920 with a streamlight tlr7 sub. SS says it will fit Glock 43x mos rail holsters. Will it fit your holster?

[@carrollwaters5375]

Anyone know if this holster will accommodate the p365xl with manual safety?

[@WerkzHolsters]

We design the Sig Sauer manual safety to fit, and we test our holsters with one of our P365 manual safety pistols. Yes, they fit.

[@6string42]

Anyone here have any experience carrying an M6 holster in the 4 oclock position as opposed to appendix? Really interested in this holster but it seems to be geared towards AIWB and I just don't like carrying appendix

[@seanyaccarino5105]

I carry it at 4 o'clock and it is very comfortable. The claw keeps the grip tight to the body as well.

[@j.dieason7527]

How bout we add more light options than three? Looking elsewhere now

[@bakenasty8860]

You guys would likely benefit from making holsters that work with the enigma from phlster! Im thinking about modifying mine to see if I can make it fit.

[@WerkzHolsters]

I would have to look again, but if I recall correctly, our holster lines up, but users may or may not want to remove the claw because it may engage too aggressively with the Enigma's surface. If you need any hardware (shorter or longer screws, etc) to complete your adaptation, let me know.

[@bakenasty8860]

@@WerkzHolsters maybe it lines up for some firearms. But for my hellcat the screw holes are too wide to line up with the enigma

[@WerkzHolsters]

@@bakenasty8860 Thanks for letting me know. I think we need to look into this more and see how we can support folks like you.

[@bakenasty8860]

@@WerkzHolsters you guys are always going the extra mile. Thanks a bunch. I actually ended up getting it to work, with a bit of adjustment and playing around it will do for now. But still doesnt fit exactly right. Was only able to use 2 of the 4 screws. But its on there very well.

[@WerkzHolsters]

@@bakenasty8860 Interesting. I'll see if we can have someone look at it this week and see if there is an adapter plate or something we could build that would fit better. Of course, the key would be to do something that is low profile / without bulk.

[@whackadoodledundee3368]

The Lucifer holster. I’m fairly fit, this appendix carry holster is clunky.

[@JohnAdams-mu7xd]

Coupon/Discount Code? lol😊

[@darenalleyne466]

👍🏾