Mitsubishi pajero/L200 starter motor solenoid and bendix change.2,5 TD.

FOR ALL YOU'R CAR PART NEEDS: tidd.ly/3H0rz8G
Hello guys,
Welcome after a bit of a break,in today's video i ame showing
how to solve a common problem with a 12 teeth mitsubishi starter motor fitted
in 2,5 TD and 2,0 d engines.
Thank you for watching and please sub to my channel for more videos.

[@rubenmartinez3705]

It has been a while since you made the video but it really helped me figure out what the problem was with my toyota starter. I was able to fix it following your your diagnosis and the video. I really appreciate your help. I only spent 15 dollars on a new bendix and a couple of hours. Thanks a lot and greetings from México.

[@budz522]

July 5,2013 Very useful video! TODAY i was able to fix/clean my van starter motor because of your VERY INFORMATIVE video. My van is been sitting for over 2 weeks now until my searches leads me to you.Now its running again. THANK YOU VERY MUCH!

[@cr10001]

Thanks! I need to replace the Mitsubishi starter on my Mazda Tribute, which has a dead (not-pulling-in) solenoid - not quite the same model as you showed, but similar. I've got a second-hand one on the way, I'll check the brushes before I fit it. Last starter motor I worked on was an old Lucas inertia starter. At least after watching your video I won't be going in blind.

[@ИванЛадников]

Спасибо большое! Реально, как по книжке помог разобрать и собрать стартер!!! Респект!

[@TheLumixfan]

Thanks for the tip on removing the cir clip at the en of the Bendix shaft. Well done.

[@bethharoldsy]

Thank you man. Informative on how to assemble and reassemble starter unit.

[@DavidAbela]

Great video. Just stripped down my genuine Mitsubishi Starter Motor. Very simple thanks to your video

[@kaikroglund8932]

mycket saklig och nogrann genomgång hur man gör utan massa onödigt prat,

[@cocospops9351]

Your accent is awesome mate. Half kerry half polish? Nice video 😆

[@janmichaelgrant4142]

Thank you for great tutorial you solve my problem i think is my flywheel bad i change the starter pinion like you said and problem is gone

[@WestronicsIrl]

Hello mate, Often these types of problems arise from bushings wearing down. And then the armature will start rubbing off the magnetic pole shoes slowing it down. So it gives you impression like the bad battery does, i dont think its something major,either bad bushings or bad brushes. Cheers.

[@WestronicsIrl]

;) No they are not,i just lost a second long bolt and couldnt find it, so i assembled the starter without it,which caused it to be bit lazy. But i tell you mate A1++ for spotting this :D,i'm impressed.

[@advgecko]

Great video! Very well explained! Thanks!

[@stopjobgetlife5]

Very useful video! Respect!

[@WestronicsIrl]

Hello mate, Its hard to tell what kind of a starter you have on it without any numbers. But usually what is fitted on them is a mitshbishi starter with a clutch rather that pinion. I might make a video for one of them shortly,maybe even tmrw cse its a video making day tmrw,the only problem is that the clutch might not be widely available. I will check do i have any of them in stock and let u know, Cheers.

[@Michael-lg4wz]

Very good information, good help for my Mitsubishi van

[@CB40FREELANDER]

Wow fantastic vid, very well put together and easily explained,, nice one.. Well done...

[@ДмитрийУральский-ц3я]

Спасибо. Очень доходчиво рассказал!

[@MegaPykey]

welcome back martin,another great video.

[@WestronicsIrl]

Hello mate,solenoid for all of those mitshubishi starters are quite common, copy-paste the link i have in the description and it will bring you to the solenoid. The only diffrence is that the push-on terminal is on the other side of the cap. Pinion is not easy to find,10,11,12 tooth ones are common,but not nine. I can check it for you tomorrow and let you know in the comment box, Cheers.

[@phil3983]

hey pal great video , I have two starters and both of them are doing the same now , turning and stopping then grinding like gear noise, how do I check the bendix , do I have to take it off and twist it, Mitsubishi l200 02,

[@SirPimienton]

Great video, it help me with the pinion replacement. What would happen if you put the fork backwards?

[@amoslee9040]

Great info thank you

[@aljhazzjazim5430]

i hve question sir is the starter hve a problem when my battery energy getting low when im not able to start my car for 1 to 2 days..and when i start my car the starter sounds like that there is heavy on it..i tot d problem is on my battery but when i bought new battery,its still like that..i brought it to the shop the mechanic told me its on the armature of the starter is grounded and nid to be replace..thank you sir,i will w8 for ur reply...more power

[@timmyjagroop1894]

Thank you so much for the info please post more videos on l200 please

[@pasanpriyamadusankahandunn1790]

Good job .thanks

[@elvio202]

Muito bem explicado... Vídeo muito bom... Obrigado 👍 👍 👍 madeira-funchal

[@christinebadenhorst3385]

Mitsubishi starter M008T75071A/ ME 204424. Cannot seem to remove bendix assembly from housing in order to remove circlip with socket. It has round wheel cover with spokes that is part of housing in front. Bendix gear spring loaded. Suggestions?? What am I missing

[@sagacyberdemon]

Excellent Video!!!! It helped A lot!!! had a similar problem with a 4M40 2.8TD, solved!!! :D

[@shaidshaikh4006]

Nice and Best video brader

[@gulabkeerio4392]

Great work you

[@carlojhonmatiga5998]

Thank you so much. Grassyass.

[@tonderaijruzungunde9770]

Where is the earth cable mounted on the triton 4d56 engine

[@d3athsm0k3]

Hello, I have the same starter motor ( Mitsubishi M001T30xxx) and my problem is that after the motor starts my starter motor still spin for 2 more seconds. I have cleaned the starter motor and everything was ok. What can be the problem?

[@bigpicturesstudio]

Hey these are great videos, very informative, thanks for doing them. I wonder if you can give me your opinion on my starter in a pajero 2.8. When I turn the key, all I get is clicks, cant get the engine turning over. Suspecting a starter or solenoid problem. What d'you think?? cheers!

[@drisnet8115]

hye, How did you see that the problem is the bendix in this starter? (Great great video, realy thanks)

[@vishalagrahari5348]

Can solve my problem Why Armature cummodator have black small circle after clean Armature work

[@denizesantos177]

Great vídeo we in brazil whatch

[@wilsonkahenanyie3796]

thank U for the info. my mitsubishi triton starter just brake down

[@wilsonkahenanyie3796]

hi how is my problem, at first start it go crank, in few second it go free. as if that the starter come free from the fly wheel

[@TheDarkbeatz]

Very usefull infoemation gived Thank's

[@gulabkeerio1930]

good job

[@lcurran4341]

Fantastic video! Really help me out. Thanks guys!! :-)

[@beatriz.alves.hatake]

Very good.

[@Craigthetoolman]

Very Helpful , thank you :)

[@Jerkwaad]

Great video dude!

[@firassaed4583]

First, how much power(ampire) does this starter consume? Second, is it possible to operate this starter for 20 continuous minutes?

[@hilmeymunster7315]

Thank you so much

[@rickafirdaus9382]

thank you

[@freddesgarage]

i used 2 open ended wrenches to put the circlip over the lockring 😉😆

[@firefighter1588]

Great video, cheers mate

[@GoncaloSantosHit]

I have this problem in my 98 Pajero, sometimes after engine is hot and come to a stop, when i try do start it, it just makes grinding noises, so i think this is my problem.

[@bmates5167]

Can somebody please tell me where the starter motor is located on a 00 Pajero. I cannot find the answer anywhere online at all.

[@valdiviaencanta9710]

THANKS....

[@allanguerrero1499]

great!.

[@foxdmulder]

@16:33 reduction gears are binded up a bit

[@mortalkombat5585]

you whether can check bendix, without setting on a car

[@benblackburn6774]

Shit hot. Thank you very much

[@leandroferreira_1982]

Não entendi nada mais compreendi 🇧🇷🇧🇷

[@MuhammadHamza-nn7hj]

Hellow every one ...plz .help .i want to install remote kit to engine start...posible 2.8.turbo disel .1998.exceed

[@MegaDyte]

I would have cleaned it too

[@АлександрЮрьевич-х5ф]

лучше не разбирал забыл вычистить от грязи да старой смазки и бендикс старый убитый не заменил если у вас в Америке всё так ремонтируют да делают я вам сочувствую присылайте к нам МЫ ваМ из самых старых огрегатов новые сделаем

[@rph310346]

for a moment is thought he must be Chinese .. some dirty mechanic..!