I agree with all the commenters who commend you for not including a bunch of fluff and getting right to the point. I hate the videos of people who love to hear themselves talk and and who use stupid exaggerated gestures and corny intros. My time is valuable. Your video was very informative. It made perfect sense. Going to test my tractor starter tomorrow.
@vusindlovu88972 жыл бұрын
Some people are naturally born with teaching skills. Mind blasting tutorial! Outstanding👌 God bless you!
@Halicet4 жыл бұрын
Thank you, This was an excellent video, that got straight to the point of exactly all the ways to test my starter/solenoid and know if it's bad or not without a bunch of unnecessary time wasting extra content. I salute you sir! Keep up the great content!
@MrMelvin33007 жыл бұрын
Thank you for this! Really helped me ensure I wasn't spending money on a starter for nothing. Appreciate you taking the time to make and post this.
@Irondrgntp3 жыл бұрын
Best video on youtube for Starter and solenoid troubleshooting. Thank you!
@roee120314 жыл бұрын
Great Video! Straight forward, scripted so we could pause and follow. Really helped me diagnose my 81 Delco Remy . Cheers
@PebbleInMyPocket5 жыл бұрын
Thank you so much for this tutorial. It's exactly what I need to know without 10 minutes of waffle.
@DDGraphicArtandSign3 жыл бұрын
Excellent! Still helping folks after all these years!
@rondumont742 жыл бұрын
Thanks your video saved my butt getting my Kubota running after a snow storm and I tried several things over a couple hours. Watched this and with a screw driver jumped positive to ignition paddle on solenoid- starter kicked in. Used key for glow plugs and did it again - tractor started right up. This tells me ignition not sending enough volts to starter. BUT I can simply install a momentary push switch to solve the issue. Thanks again
@6axisptyltd4534 жыл бұрын
Excellent video! Straight to the point and checks all components. 👍
@franksimpson93233 жыл бұрын
Excellent and thorough. Exactly what I needed to learn. Thank you!!
@khamteh297 жыл бұрын
Ten times better than going to school. Learn heaps in 3 minutes. Thanks dude
@tobi-Mivumbi2 ай бұрын
Going to school today is so shame
@driver30254 жыл бұрын
Best starter motor video on U tube hands down. Cheers bloke
@lmakula713 жыл бұрын
Thank you very much ! Now I am not confused, and I can check the starter motor 👌👌👌👋
@randomusername03 жыл бұрын
The guys disliking this tutorial are these who throw their working starters without testing it. Perfect video.
@Dazman-ju1tu6 жыл бұрын
Great video, very helpful and to the point. wording needs to stay up for twice as long.
@jackgrondin13517 жыл бұрын
VERY helpful. thank you. worked just like you explained it. I was able to determine it was my starter.
@schmittenhammer8 жыл бұрын
Short and to the point, thanks!!!
@DreiGhost3 жыл бұрын
Very good explanation
@tahep39068 жыл бұрын
this is what I was looking for to understand how motorcycle starter system works, thanks a lot!
@sarahicastromatei39205 жыл бұрын
Gu. .
@lemoinexavier7 жыл бұрын
No bla bla bla, just to the point. Great video. Thx!
@ericsvalgard92205 жыл бұрын
this is a great video. No bullcrap
@TehKaiser7 жыл бұрын
Superb video. Other videos are not as comprehensive on what to check out, such as the solenoid failure mode and checking for voltage.
@michael66928 жыл бұрын
just tested mine the motor is f,,, and so is the solenoid ,, new all round thank s bud good vid
@davidamata12 жыл бұрын
Great video thanks for you demo 👌
@callmebackfriday22 жыл бұрын
I got a used one OEM starter in ebay and now I know how to test it before installation. Thanks for the excellent video. By the way, anyone how how long starter will last for a Toyota Corolla (it has 190,000 miles), about time go bad ? Thanks
@gordondaniels962 жыл бұрын
straight to the point very helpful
@PaulHenreid Жыл бұрын
Excellent video. Thank you!
@ACommenterOnYouTube Жыл бұрын
i did all these tests and the starter was still defective, it would push out and spin but with NO load, once you put the engine load on it, it would not crank the motor.
@RAJIMAX82 жыл бұрын
Thank you, I checked using video, both solenoid and motor works but I couldn't work out how to wire to test the voltage using the multimeter, the video doesn't show what wire goes where, can you explain please?
@markjennings23155 жыл бұрын
Brilliant, many thanks for posting!!
@robertunger45718 ай бұрын
I had a 1 click when I started my 2002 tahoe keep clicking and eventually it would start. Oreillys tested it 5 time checked ot good. Replaced it anyway and now it works perfect.
@eoincc4 жыл бұрын
Very well done, clear and precise this.. cheers great help 👌👌👌💯
@bozomula2 жыл бұрын
Thanks man great tutorials
@vladimirstankovic40965 ай бұрын
Thanks a lot, the best explanation. I know repeating myself. How many times can I press the subscribe and lake buttons.
@hurricane2madaba4 жыл бұрын
Great tutorial thanks alot
@Junqueira2233 Жыл бұрын
Hi, where could be a problem, if starter rotates, but pinion doesn't push out? Starter is new. I changed it, because of this problem. It hapenned on my last ride before winter time. When I was running on highway, engine stall suddenly. So I glided to the highway exit and put cas aside and tried to start engine, but it didn't. Only starter was moving. We towed to my garage and there I noticed, that starter didn't move with crankshaft. I tried to change starter relay, but it didn't help.
@prabhavathiprakasam27695 жыл бұрын
Simply nice and helpful to all Dr.K.Prakasam
@BEEBEE1598 жыл бұрын
That was awesome demonstration. Even an idiot like me could understand. Thank you.
@peterbonetti964310 жыл бұрын
Good info, nice layout too. Thank you.
@brahmabob12258 жыл бұрын
Nice and simple. Excellent work, brutha!
@lawdawg03648 жыл бұрын
Thanks for this video. It helped me a lot
@cocabbae18683 жыл бұрын
When the motor pinion often stuck, what do I need to fix? It usually works but sometimes stuck. Do I need to replace the magnetic part or motor part?
@kalvink1008 жыл бұрын
Excellent demo. George C.
@yurialcatraz74243 жыл бұрын
thanks for this video, now i know my problem: this is solenoid internal contact, because connecting motor directly, it work. if i open solenoid and clean this contact, maybe can i repair it?
@mikem54752 жыл бұрын
Yes!
@jorgecabrera25895 жыл бұрын
Good video, very good, just instructional
@Davpana4 жыл бұрын
Hi, i want to test the solenoid of the starter motor without to dismounting it from the car, can i do this whitout making damage? obviously i disconnect battery from the car before. Thanks. When you are writing that the internal contact of solenoid is bad in the video instead i think it's only the tester probe that doesn't make contact with metal of the bolt, it is covered of dirt.
@teravolt61138 жыл бұрын
So these sound much like a power drill when freed from the engine. Never heard the whine except on some buses when the engine went idle and the pinion was released. Thanks for the video.
@Davpana4 жыл бұрын
Good video, but the part where it uses the tester is useless 'cause if the motor starts then by force there is voltage on the positive input of the motor. The right test was to put the + of battery only to the spade connector and with the meter in ohm test between + batt input of motor and + batt output contact to motor stator
@simonilett9982 жыл бұрын
By rights if the solenoid contacts were bad the motor obviously wouldn't spin, but there is much less load on the motor when it's not trying to turn an engine, so not a conclusive test. Also, your ohms test method is also not the best way to test the solenoid, as without the main battery cable connected and motor not running, there is no current draw accross the solenoid contacts, so you could well see a good ohms test even if the intetnal terminals weren't making a good connection to carry the high current the motor needs. The best test would be a volt drop test across the solenoid terminals, with the motor running. Set volt meter to 20volt setting and place the (+) Test probe on the battery feed terminal, and (-) Test probe on the motor feed terminal, then trigger the motor to run via the start terminal. You want to see as low a voltage reading as possible across the 2 terminals (preferably less than 1 volt, or better would be in the milli-volts range) with the motor running/circuit loaded for the most conclusive test. This then proves very little voltage drop/loss across the internal contacts of the solenoid👍
@modimaruti58746 жыл бұрын
Great informative video sir 👍 👍 👍 great work sir 👍 👍 👍 best regards for the future videos 👍 👍 👍 👍
@tyronekelly4339 жыл бұрын
Excellent fairplay.
@_cloudface_6 жыл бұрын
Connected the positive cable to the positive battery terminal and then to the ignition part of the starter, then I connected the negative to the body of the starter; when I connected to the negative terminal of the battery it kinda sparked and left a mark on the terminal...and the pinion moved forward and did a slow rotate thing...I'm confused ayy
@jonnasvictoli6822 жыл бұрын
iwant to know which why is easy to fix and to test the engine and the names of equipment that needed when fix it
@JuanCarlos-pc4gu6 жыл бұрын
loud and clear sir!
@matrixate8 жыл бұрын
Brilliant exhibition.
@AskHack7 жыл бұрын
The starter sticks on my boat and when it does kick in it barely turns the motor over with the plugs out even. I hate myself because its on the bottom and im going to get really drunk now. Thanks for the video when i get up with a shitty hangover i will be able to test it but i know already its bad.
@billyjack33616 жыл бұрын
Excellent video. Thank you.
@emth70848 жыл бұрын
FUCK!! that starter test scared the shit out of me!! XD i thougt you were going to check the voltage for some reason X,D
@fcatlantida87653 жыл бұрын
Jumper cable is prob a better term that positive terminal
@joejoemcgee3 жыл бұрын
Thanks for this!
@orionburton79248 жыл бұрын
thanks very simple and helpful
@franciscorosas24236 жыл бұрын
helpfull for the most part! but i know your not suppose to bang on the starter because then it fucks up the brushes or permanent magnets inside then your screwed and need to replace the starter. Why dont you just open the starter up and fix the the problem directly?
@dennispittman45557 жыл бұрын
Informative video... Thanks for the upload
@MrLee200997 ай бұрын
Where can I buy the lead you used to bridge the connection?
@Sergio-bs4dx5 жыл бұрын
Great video!!
@rudihenry52986 жыл бұрын
Great video, thanks a lot
@macksoneh5 жыл бұрын
2:33 Test 4: Electrical motor testing - Would it be safer to use the thicker red cable instead of this think tester cable and probe?
@YT-glockstreamerАй бұрын
Mines just spins but doesn't engage do I need to get a whole starter
@walther893 жыл бұрын
dose it need to move freely also by moving with fingers ? or it needs to be very hard ?
@fkp16929 жыл бұрын
Very nice, thanks.
@easycookingbd37604 жыл бұрын
Hlw sir, can you plz help me to know, how I can calculate what size of AH battery do I need to start a 10 KW self-starter. Plz explain with formula
@soonerclark11 ай бұрын
Where is the cable hooked to? Space?
@muqadaskhan80114 жыл бұрын
Thanks your sir
@achmaddarussalam4 жыл бұрын
Why the pinion should spin without moving forwads ? Its problem the selenoid starter ?
@Al-rx1vs2 жыл бұрын
In my Vista petrol no click sound coming all other lights working fine.why starter motor getting jam and what is the average repair cost
@paulscontainersltd.40206 жыл бұрын
The video helped me Alot Btw what is the spade ?
@KingGumboot5 жыл бұрын
Late reply but in case future viewers have this question, the "spade" mentioned is just a small tab of metal that a cable (from the ignition) connects to.
@rebeccacurtis38805 жыл бұрын
Great video! If I want to run these tests myself, does anyone know the name for the leads I'd need? I have a multimeter
@castormoses42608 жыл бұрын
am student of NIT but i like to understand more about automotive.
@valcic19932 жыл бұрын
i have problem out of car its working that bud wheni crank engine do clickk and starter turningbat no cranking flywheel
@ankitbaraili33946 жыл бұрын
how much current does it takes to run
@g.j.dutoit44475 ай бұрын
Why if bench test ford ranger starter, it not stay ingauge if i keep small wire on pin. It uningage with start small wire on start point. It must only uningage only when i take of start thin wire, am i right or wrong? Rrrrrealy hope someone can help me. Thanks guys.
@10MTRADERSACADEMY5 жыл бұрын
Thank you brother 😍
@rogerjamespaul6741 Жыл бұрын
I recently installed a new starter on my Same corsaro70 tractor, and it makes a loud rattling noise while starting the tractor. Does anyone know what the problem could be.
@priyanshsharma4807 жыл бұрын
how much current does the solenoid draw?
@Banditt424 жыл бұрын
Great video. But I really miss a long introduction graphic followed by 5 minutes of babbling on about how great you are and trying to sell something before giving useful information.
@jahfiyah6193 жыл бұрын
Should i be able to move the pinion freely ..if i shake it should the pinion move back and forth freely
@jahfiyah6193 жыл бұрын
Without connection
@huseyin13125 жыл бұрын
Very thanks !!!
@raitshots Жыл бұрын
Coal defec. Rebuild and again work
@sunnycampers42495 жыл бұрын
Brilliant..... thank you :-)
@justcrusin40295 жыл бұрын
Connected it backwards before watching video , put negative on ignition tab , possitive on the terminal . Will this have burnt it out ?
@swedensy4 жыл бұрын
no. Tab is just turn run current through the electromagnet coil of the relay. Relays works same way no meter the polarity.
@davidpaz12808 жыл бұрын
how can i fix the problem when the pinion moves forwards but does not rotate and i cant fix it with the hammer?
@Farmer24926 жыл бұрын
Hi I have a chev diesel motor when i put a charged battery in and go to turn it over it sounds like the battery is flat does it sound like the starter
@farerse6 жыл бұрын
can the issue also be that it spins but does not move forward ?
@TomsTenorHorn5 жыл бұрын
Hi Farerse ... not really possible unless you have the heavy wire from your battery or alternator connected to the wrong terminal on your starter ... it acts as a relay switch ... when the solenoid is energised via the ignition it pulls a piston inwards (pivoting the gear forward) and a circuit is made within the solenoid housing allowing the current to flow from the heavy wire on the solenoid case across to the other heavy wire that feeds the starter motor ... when you release the ignition the solenoid is de-energised and a spring pushes the piston forward breaking the feed to the starter motor and pivots the gear back in.
@simonilett9982 жыл бұрын
I'm surprised your test lead or test probe didn't melt running that motor directly🤣
@johnpalma72658 жыл бұрын
Thank you ,sir.
@firassaed49446 жыл бұрын
Hello I have a question important .is me can to use of Motor starter the car this in the game scooter baby weight 25 kilo please respond and thank you ???
@hermanmelville20292 жыл бұрын
very good
@michael_mack11 ай бұрын
thx a lot!!!
@laeekansari5006 жыл бұрын
Fantastic
@mehulprajapati56907 жыл бұрын
U can talk me appeox rpm of indica diesel starter?? Which value peak amp. Gain on load?