How to Change Turbo Boost Solenoid

[@amana1480]

It would have been nice to see you revving the engine after repairing the car so we could see the boost pipe inflate

[@225M3RCR]

It’s good to see a proper family run business mate your doing well everyone’s heard of West Yorkshire engines now 👍🏼👍🏼

[@adamarnold3154]

Thanks for another great tip, from Australia 🇦🇺

[@PaulSmith-qd3zt]

Thank you Sir. Can't find anyware how replace boost solenoid and I find you on youtube. Great video. Thank you.

[@scottchristensen5775]

Thanx Mate you have helped my out heaps with your instructions, Cheers from Australia

[@scottphojer144]

Loving the informative videos!!! From Australia

[@jamirayden532]

sorry to be so off topic but does any of you know of a method to get back into an Instagram account..? I was stupid lost my login password. I would appreciate any tricks you can offer me.

[@rykergael5335]

@Jamir Ayden instablaster ;)

[@jamirayden532]

@Ryker Gael Thanks for your reply. I got to the site thru google and I'm trying it out atm. I see it takes quite some time so I will reply here later when my account password hopefully is recovered.

[@jamirayden532]

@Ryker Gael It worked and I actually got access to my account again. I'm so happy! Thanks so much, you saved my ass !

[@rykergael5335]

@Jamir Ayden You are welcome xD

[@yoshimoto2600]

I just had my d40 running guttless. My mechanic said it was code p0120. I went ok. Took it home and the hose to the waste gate had broken off. Goes good now

[@2005randerson]

Great video, got same symptoms and replaces solenoid as described but no difference ... still lacking power/same symptoms.. Any ideas ??

[@samtwite6709]

Same here. Did you find the issue?

[@2005randerson]

Sam Twite ....yes , I traced the vacuum hoses over the top of the engine and found a split in one of the pipes ... is was right next to a union so cut out the split and re attached .... power restored 👍

[@leswilliams3442]

I Joiner, Sir , thank you I just replaced the boost solenoid and didn't fix the problem, So thanks to you I checked all my vacuum hoses and there was one that was completely split. thanks heaps Les

[@theforester_]

Thanks for this mate. Big shout out from Brazil

[@Scartworks]

Would you recommend replacing the factory intercooler hose with a rigid metal one? More power or waste of 80 quid?

[@westyorkshireengineservice9160]

waste of money

[@Scartworks]

@@westyorkshireengineservice9160 Yeak, thought so -thanks. It seems popular in Australia. Maybe it make more sense in very hot countries.

[@marcogonzalez7829]

@@Scartworks I've just ordered a hard pipe after doing a bit of research. The reason to change it is because the factory rubber one expands under boost and there is a small loss of boost in the expansion. The hard pipe doesn't expand. I'm also doing it to get rid of that hideous canister in the middle of the pipe that leaks oil and installing an oil catch can. I'm in Australia, it's a big country and we have all sorts of weather and temperatures.

[@lanceocallaghan5052]

I changed the boost control vacuum solenoid I now have more power but I also have a surge when driving just wait and I’ll check the pipes they’re fine in the right place just wondering what the next place to look is please from down under thank you

[@claudiofigueiredo6357]

Hi mate, nice tip. Can you send some light on a flat spot under load just when the auto is about running above 60km/hr it looses power (like a flat spot) as it kicks down going up a hill and starts to pulse? I was leaking towards the boost solenoid but I did your test and the pipes pull my fingers apart. Many thanks!!!

[@westyorkshireengineservice9160]

Claudio Figueiredo when was it last serviced it might just need a fuel filter and a injector cleaner

[@claudiofigueiredo6357]

@@westyorkshireengineservice9160 Hi. Thanks for reply. Yes. It has had all that. Also Replaced the suctiin control valve and reset pump with the modis ultra. Could it be bad turbo? So it only happens under heavy load, above 60km/h. It's got to be a long high hill. Kicks down and flat spot, starts surging and no power. Otherwise runs like socket. It has had engine swap in the past.

[@lagusmarine7200]

@@claudiofigueiredo6357 did you get the fault fixed?

[@hummv28]

@@claudiofigueiredo6357 did you end up getting it fixed? I have the same issue!

[@myleswaller]

I think I'd fit a pierburg part at 1/2 the cost .

[@westyorkshireengineservice9160]

myles waller We did try euros but they did not have it so sadly had to get from Nissan buddy

[@myleswaller]

Main stealers are robbers lol

[@MrSbu79]

How do I connect these hoses, they were completely removed from the car?

[@leswilliams3442]

G'day, Sir, I have found the issue thanks to mr I Joiner, could you please tell me if all automatic 2.5 diesel navaras are a little sluggish from a standing start until the turbo kicks in. Thank you Les

[@nhlaing]

Can you explain which pipe go where coz on the internet theres some different answer

[@MusicalRetroAdventures]

Do newer models also have the boost solenoid ? I think I've got electronic boost controller on mine.

[@westyorkshireengineservice9160]

Above 2010 yes you are correct you need to scan the Ecu to be sure.

[@kieranloftus6807]

My np300 runs good at high revs and crap at low revs, could be this problem!!!! Where is this located on np300? Thanks!!

[@surajgosine4264]

yes boss d problem i have is i change d units but d acatur not working

[@leswilliams3442]

G'day, Sir I live in Australia and own a Navara 2010 D40 2.5 turbo diesel from Thailand, I suddenly found my truck really lacking in power and tried the squeezing the hose and then changing the Turbo Boost Solenoid and it didn't make a difference. when I take off the turbo doesn't seem to be working. Do you have any suggestions for me . Thank you. Les

[@daviesmanase8822]

I changed my boost sensor but my hose still sacking air in when raved could I have messed up the hoses when replacing or do I need seal of some kind?

[@jasonmurphy435]

how much!!!! done my peugeot myself and the boost solenoid cost 48 quid.i was heartbroken payin that lol

[@amana1480]

Hello what Peugeot engine was it? Cheers

[@steveeyre8444]

I have the same issue, large bore pipe coming from turbo does not inflate when you rev. Is there a way to know which pipe should go where as you just swapped 1 for 1, expecting them to be correct. My hoses are colour coded, one is blue and one yellow from memory. 2010 Navara auto 2.5td

[@chrisbeling7350]

Hi I replaced my solinoid and it pulls waste gate closed but does not open under load . Any idear or information where to look . Chris S.A

[@emidiojosegomes]

This piece is original nissan? I already tried 3 valves that were not original and do not work well, they do not drive the turbine at low speed.

[@jports5460]

Hey mate I have a 2009 stx would a boost solenoid failure cause my car to over boost as my car is reaching 30+ psi I haven’t driven it since until I figure out the problem

[@DanBarron34]

When I squeeze the pipe it does expand when around 5k revs should it expand earlier?

[@Scartworks]

Loving the videos & wished I lived nearer to you - I'd be round with my 2008 Navara Aventura straight away!

[@raizenkho8918]

Can i know how to check the bost contol system thank

[@cjthackray]

I cant seem to find mine, is it different on a 2011 model?

[@robeleton170]

Hello I'm from Ethiopia and I currently own a Nissan Navara D40, 2005 model., VSKBVND40U0056134..... The Turbo boost solenoid sensor need to be connected and I’m having trouble to connect on the Turbo. I couldn’t find the right place or spot to connect the tube. Please I need assist to solve the problem. for your help in advance.

[@arbcoarb3568]

Iav got problem will l200 b40 with low boost between 2000rev and 2800 revs any ideas

[@raizenkho8918]

Hi sir need help my navara low boos but after i change the boost solenoid the boost come bake but i brack my turbo compression whell

[@jorgenoriega8048]

My car is having this code but I don't get it, my car has a normal v6 engine, no turbo.

[@Falco45able]

Were did you get £260 from?

[@Alex34417]

Any one have any information after changing a new boost solenoid do you have to reset or is no need , thank you in advance who reply’s.

[@alisazouz6147]

comment installer les tuyaux ELECTROVANE TURBO POUR VEHICULE NISSANT PATHFINDER ETAPE PAR ETAPE

[@josiahsiduna9165]

Hello an one who can help me with a pathfinder vacuum connection

[@marcaomd3063]

How I know my solenoid is bad?

[@dxnedit]

Ohh Really

[@homiuciulian1802]

I don't think is the boost sensor

[@davehartuk]

More vids please..!!!!

[@jeffreycreman2605]

what was that i dont get it

[@westyorkshireengineservice9160]

It sits just below the air box it has 3 pipes And to test it half squeeze the main boost pipe get someone to give it a harsh rev if it sucks in boost solenoid goosed buddy

[@johnwane4255]

Have they heard of the money he took from me via wire transfer from all the way in the caribbean to purchase an engine for a custumer and since then (february) this year i haven't gotten am engine or a refund and this man claim to run a honest business. Bullshit..........!!!!

[@lazarusramaube8291]

You're gonna wait very long, his silence on this matter is deafening.

[@anwrist]

thank you brother

[@TheMotard7]

Дак и чё сделал то ??? Всё бросил на пол пути 🤔 дальше то что куда😕???

[@truongminh3731]

very good 22-12-22

[@johnwane4255]

Where is my $5000 refund des its been 6months ???????

[@coreylacey5688]

john wane sort it out yet?

[@pinkplampufffam1213]

plz explain....have you had troubles with this guy?

[@johnwane4255]

Up to this day I haven't recieved a refund or a promise of one from this man since he took my $5000 deposit for an engine I never got. He is dishonest.

[@gavynpope6190]

£260 for a boost solenoid bullshit