Wet Cell VS Dry Cell. Hydrogen Generator HHO. Fuel from Water

Hello. First of all, thank you all for your support and thanks to you I have come this far. Thanks for the messages and likes.
Who has not subscribed yet do not hesitate to do so: / fantotzyy
In this video I do exactly what I promised you, the dry cell hydrogen generator versus the wet cell hydrogen generator. I will test the production of hho with a new instrument for measuring liters per Minute (l / min), And I will measure the amps consumed.
We made an identical electrolyte mixture for the two hydrogen generators to make the exact difference between them. For the electrolysis of water I used distilled water and potassium hydroxide and as an electricity I used a 12V battery. The generators Know them from the past videos, were presented step by step how they were built. They consist of 9 316L stainless steel plates with a thickness of 1 mm and a diameter of 60 mm.
I was surprised to see that the dry cell produces 1 L / min (one liter per minute). I was surprised because it is a very small cell with only two elements connected to electricity at positive and 1 at negative. I got a nice electrolysis so to speak.
I think this putty can be easily used for a small scooter, a small motorcycle or a small motor bike.
With these small generators we can get free hydrogen from solar panels that produce solar energy. Free energy, free electricity. Hydrogen free, Fuel free.
Thank you very much for viewing, give a comment and a like please and follow me to see a new special hydrogen generator that is made with the remaining materials from other generators.

[@Inventive101]

Friends, let's promote this channel to see what other surprises it brings us. Like comment and share please

[@adamgeorge2523]

👍👍👍

[@gabrielaplay5598]

👍❤️❤️❤️

[@luminitapricop2467]

Bravo

[@nicoletanicoleta1840]

❤

[@Inventive101]

@@nicoletanicoleta1840 😉

[@mikewalsh511]

Keep in mind the flow meter is for oxygen only and calibrated only to that. Since HHO gas Is two parts hydrogen that will throw off the meter, usually showing more LPM than you actually have. I found this out back in 2007 doing similar experiments.

[@Inventive101]

I thought about it but I didn't have time to document myself, now that you've told me ... thank you

[@Prodigal153]

Very well done, the music got a bit annoying toward the end but that doesn't take away from a very high quality HHO wet / dry duel.

[@Inventive101]

😀 Thanks

[@jitalsc]

HIDROGENIO: kzbin.info3rJiCPObPj4?feature=share ......... [17/9 5:08 PM] HIDROGENIO: kzbin.info/www/bejne/opnUn4mef5uVjqM [17/9 5:09 PM] HIDROGENIO: kzbin.info/www/bejne/fGeZi6CkmNqWjbM [17/9 5:09 PM] HIDROGENIO: kzbin.info/www/bejne/d6jThqqCp7Jppc0

[@Coincidence_Theorist]

The music is awful

[@bonks4395]

yep I skipped the video because of the music @@Coincidence_Theorist

[@raghuveerdendukuri1762]

really nice, good experiment, happy to see dry cell is always outperforming wet cell.

[@Inventive101]

Thanks

[@ziggityzach6757]

I didn’t see a difference Great now I gotta look again

[@aleksandarpetrovic6613]

Wet cell is much more efficient, he just made wrong connection of wires (and of course need right voltage?

[@TravisTellsTruths]

I'm glad to see its not THAT different! 👍 Great test!!

[@Inventive101]

Thanks

[@jitalsc]

HIDROGENIO: kzbin.info3rJiCPObPj4?feature=share ......... [17/9 5:08 PM] HIDROGENIO: kzbin.info/www/bejne/opnUn4mef5uVjqM [17/9 5:09 PM] HIDROGENIO: kzbin.info/www/bejne/fGeZi6CkmNqWjbM [17/9 5:09 PM] HIDROGENIO: kzbin.info/www/bejne/d6jThqqCp7Jppc0

[@doutorhidrogenio]

Definitive prof of dry cell eficiency., Great man, thank you for excelente work.

[@Inventive101]

Thank you very much friend 😉

[@jitalsc]

HIDROGENIO: kzbin.info3rJiCPObPj4?feature=share ......... [17/9 5:08 PM] HIDROGENIO: kzbin.info/www/bejne/opnUn4mef5uVjqM [17/9 5:09 PM] HIDROGENIO: kzbin.info/www/bejne/fGeZi6CkmNqWjbM [17/9 5:09 PM] HIDROGENIO: kzbin.info/www/bejne/d6jThqqCp7Jppc0

[@PandorasBox2]

yeah but it draw more AMPs

[@aleksandarpetrovic6613]

Wet cell is much more efficient, he just made wrong connection of wires (and of course need right voltage?

[@JDekca]

Those were put together very nicely. Thanks for taking the time.

[@SurpriseToysShop]

May I know how many watts, amps, volts were in the LPM test in the Dry and Wet Cell? LPM test looks like with over 30A 360Watts 12 Volts? Why is the ball wet inside the LPM meter in the Dry Cell test? If you leave the LPM meter wet inside, you may get inaccurate 5 LPM results. Can you do a real test with the bottle?

[@Inventive101]

Yes, I did tests with the glass in the trough, I will add a subtitle that they are very old and I will replace them

[@jitalsc]

HIDROGENIO: kzbin.info3rJiCPObPj4?feature=share ......... [17/9 5:08 PM] HIDROGENIO: kzbin.info/www/bejne/opnUn4mef5uVjqM [17/9 5:09 PM] HIDROGENIO: kzbin.info/www/bejne/fGeZi6CkmNqWjbM [17/9 5:09 PM] HIDROGENIO: kzbin.info/www/bejne/d6jThqqCp7Jppc0

[@thefeet]

I've been watching the HHO community for a long time. You earned my sub. I have long suspected dry-cell was the way to go. This confirmed that for me. To the guys who say you never hooked up the wet cell long enough? come on...do you REALLY think that wet cell would catch up and out-perform the dry cell in this experiment? Like... electrolysis is some sort of "marathon" where the wet cell catches up and takes over... wins and arms flailing across the finish line??? pffft... wet cell is a MESS to deal with to begin with...

[@aleksandarpetrovic6613]

Wet cell is much more efficient, he just made wrong connection of wires (and of course need right voltage?

[@Gen_Kael]

Wow, that explained everything 😂

[@Inventive101]

I gave this test at the request of your friends. what else do you propose?

[@therealtpain90]

You left the dry cell hooked up WAYYY longer until the ball rose to 1, then unhooked it. The wet cell you didnt leave hooked up long at all compared to the dry cell and i feel like if the wet cell stayed hooked up it would end up at 1 as well

[@johnnye2346]

The wet cell had more open volume above the electrolyte. Had it been equal to the dry cell id predict the wet cell would out preform the dry cell due to more surface area in the electrolyte for the formation of gas bubbles to occur on. . The open volume leaves area for compression reducing the flow at the start of production. So i agree with you.

[@hhogasproduction5081]

Thanks.Sir Good information about both cell.👍👌👌👍 nice Sir your job 👍

[@Inventive101]

Thank you very much friend

[@thilovonstillfried6278]

This is what I did with my kosmos experiment kit in my nursery in the 1960s

[@RodneyEgonio]

Hello sir! I just imagined if you could try the hard drive platters (from defective HDDs) as HHO plates instead? A video for this would be very much appreciated. Thank you!

[@qqqqwwan]

Awesome brother. Your Kit quality and its precision is absolutely amazing. really very impress.

[@Inventive101]

I did the experiment that some asked for. Please like and comment 👍👍🙏🙏👉🏻

[@iwankurniawan1081]

Semoga sukses untuk semua karya yg anda kerjakan 😊

[@Inventive101]

Terima kasih banyak. 😉

[@dvidconstntin4567]

Good job!!

[@Inventive101]

Thanks

[@TVmadethemdoit]

Do make the plates yourself, or do you purchase pre-cut patterns from somewhere? Thanks

[@Inventive101]

I make the sketches myself on a program and then cut them with a laser

[@alexandervillalta5339]

Thanka a lot.

[@Inventive101]

First of all, the advantage of the dry cell is that it has better ventilation

[@federicok1735]

Hello friend! very good work and models, and yes has a natural air ventilation... so what if extend de size of the plates (out of model) in order to have more plates area to reach more air? like a "radiatior"... and if its not sufficient to cool down you can put a fan or two (one on each side) to help cool it better...

[@Inventive101]

@@federicok1735 Thank you very much, yes you can add fans. I don't use them too much, I only do small tests for the beginning, when I have time I will do that

[@shansundaram2199]

Another awesome video. Thank you 👌👍😀

[@Inventive101]

Thank you very much friend

[@6023]

Thanks for the great video. I have a question, why are you using unpowered electrodes? I see that only 3 of the 9 electrodes are powered. I would appreciate it if you could explain.

[@veerababunukapangu3516]

Nice thinking, Fitting box material you use for dry cell and wet cell water storage, Acrylic or poly-carbonate clear sheet ? and how much thickness?

[@valleyfood548]

I love hho generator projects.

[@Inventive101]

Thanks 👏

[@jitalsc]

HIDROGENIO: kzbin.info3rJiCPObPj4?feature=share ......... [17/9 5:08 PM] HIDROGENIO: kzbin.info/www/bejne/opnUn4mef5uVjqM [17/9 5:09 PM] HIDROGENIO: kzbin.info/www/bejne/fGeZi6CkmNqWjbM [17/9 5:09 PM] HIDROGENIO: kzbin.info/www/bejne/d6jThqqCp7Jppc0

[@electronic7979]

👏👏👏

[@Inventive101]

👍😉👌

[@998vick]

Nice, where you got the measure device? Anyway great results on 6 amp.on drycell.

[@Inventive101]

I ordered it from the internet. Thank you

[@998vick]

@@Inventive101 can you give me a link?

[@Inventive101]

@@998vick I will search and send

[@998vick]

@@Inventive101 thx

[@Inventive101]

@@998vick m.banggood.com/LZQ-2-3LPM-Plastic-Air-Flow-Meter-With-Control-Valve-Connector-p-937786.html?act_poa=SKU154237&cur_warehouse=CN&rmmds=detail-bottom-alsolike

[@kwasiadu-amankwah7578]

How long will the stainless steel electrodes last

[@hissst69]

Thank you !

[@Inventive101]

🙏

[@jitalsc]

HIDROGENIO: kzbin.info3rJiCPObPj4?feature=share ......... [17/9 5:08 PM] HIDROGENIO: kzbin.info/www/bejne/opnUn4mef5uVjqM [17/9 5:09 PM] HIDROGENIO: kzbin.info/www/bejne/fGeZi6CkmNqWjbM [17/9 5:09 PM] HIDROGENIO: kzbin.info/www/bejne/d6jThqqCp7Jppc0

[@ngmngoc]

Really nice 👍, can i have a question boss! What kind of power you using boss? Thank you boss .

[@Inventive101]

Thanks. Just call me friend 😊. I use 12 V

[@resinductelec]

Nice work. Subbed and watching.

[@Inventive101]

Thank you very much 😉

[@murguflorin4046]

Good experiment

[@Inventive101]

thanks

[@ciprianvlagera1374]

Foarte fain experiment

[@Inventive101]

Multumesc

[@bioswars8827]

Thanks for showing this. Now a quick question. Why does your video title indicate Hydrogen Generator HHO, When it's Brown Gas?

[@Inventive101]

It is a generator that releases hydrogen mixed oxygen and call it hho

[@Inventive101]

Thanks

[@stalinjosej3768]

V nice work and explained well

[@jitalsc]

HIDROGENIO: kzbin.info3rJiCPObPj4?feature=share ......... [17/9 5:08 PM] HIDROGENIO: kzbin.info/www/bejne/opnUn4mef5uVjqM [17/9 5:09 PM] HIDROGENIO: kzbin.info/www/bejne/fGeZi6CkmNqWjbM [17/9 5:09 PM] HIDROGENIO: kzbin.info/www/bejne/d6jThqqCp7Jppc0

[@kangbuyurchanel]

sangat bagus sekali..broow

[@motto666]

So, they both consume the same amount of ampere and give off same amount of gas right? What is the advantage of the dry cell? I thought the wet cell should give off more gas because it is totally submerged, more surface area? What is the cost of building one like this? Are you selling them?

[@Coincidence_Theorist]

I the dry cell was superior

[@faturrahman1406]

Did you try to run it for an hour? Which one is hotter?

[@mrstratau6513]

Interesting

[@Inventive101]

Thanks

[@ChristmasEve777]

Who coined those terms? To me, it never made sense. They're both "wet" cells. Of course water is needed because it's electrolysis of water. Really, the difference is one is completely immersed while the other only contains water in between each electrode (much like a PEM cell). Immersed vs non-immersed.

[@lucascouto6908]

Seus vídeos são fantásticos

[@Inventive101]

Muito obrigado

[@jitalsc]

HIDROGENIO: kzbin.info3rJiCPObPj4?feature=share ......... [17/9 5:08 PM] HIDROGENIO: kzbin.info/www/bejne/opnUn4mef5uVjqM [17/9 5:09 PM] HIDROGENIO: kzbin.info/www/bejne/fGeZi6CkmNqWjbM [17/9 5:09 PM] HIDROGENIO: kzbin.info/www/bejne/d6jThqqCp7Jppc0

[@jitalsc]

HIDROGENIO: kzbin.info3rJiCPObPj4?feature=share ......... [17/9 5:08 PM] HIDROGENIO: kzbin.info/www/bejne/opnUn4mef5uVjqM [17/9 5:09 PM] HIDROGENIO: kzbin.info/www/bejne/fGeZi6CkmNqWjbM [17/9 5:09 PM] HIDROGENIO: kzbin.info/www/bejne/d6jThqqCp7Jppc0

[@nicoletanicoleta1840]

Nice

[@Inventive101]

thanks

[@___Chris___]

Nice quality. Call me impressed (and congratulations for the 10.000 subscribers!). Two questions: 1. Would it help to add a surfactant (like e.g. liquid simiticone from the pharmacy) to the electrolyte? My reasoning: reducing water surface tension for easier release of the gas bubbles from the electrodes (=might increase the liters/min) and reduced foaming. Does anybody do that? 2. Another idea for facilitating an easier release of the bubbles: would it help to glue a piezo ultrasound element (like the ones found in ultrasound cleaners) to the casing? Has anyone ever tried that and do you think it would be safe (=not facilitating spontaneous ignition)? I'm german, but I understand Romanian well enough, so feel free to answer in Romanian, in case that's easier for you.

[@wastelandman198]

Or maybe Redline Water Wetter. Or spa anti-foam additive.

[@Coincidence_Theorist]

Ive seen someone use a piezo in the case. Its began to put a hole through the side of the plexi perspex.

[@Coincidence_Theorist]

Interesting idea with the surface. You s should make stuff. You have excellent logic

[@Inventive101]

Welcome to my channel 🙏

[@ziggityzach6757]

Ummm ahh Cool

[@barryparsons7874]

Looks like a good size for a motorcycle

[@Inventive101]

Yes, he could probably go on a motorcycle

[@thewestindianboy]

Love your videos and music. What is the plastic device you used on top outlet. The small white plastic. I thought it was some filter to absord moisture. if an can post an online link to buy. Last question. What about heat? If i build this and use it on my bike. Will this get super hot and make steam after an hour? Thanks for your time.

[@Inventive101]

It will not heat up much. you need to use some filters to stop the steam. diesel filter or compressor filter. Are you referring to the instrument for measuring air flow?

[@Inventive101]

I'm so glad you like my videos.

[@Inventive101]

You must also use a pwm

[@massimocerrone6551]

Sono fatti così bene che sono piccole e con pochi ampere produce quasi un litro a minuto .

[@Inventive101]

Molte grazie. In generale, quello che faccio sembra buono e se sembra buono e funziona bene 😊

[@indrakurniawan5585]

Katalis apa yang terbaik untuk HHO generator, agar menghasilkan gas hidrogen yang banyak?

[@kfchu3]

You must this question so many time. Do you sell these kits? If yes, how can people order from you? Thank you for your time.

[@lzcamperITA]

hi, nice video, i'm questioning why did you wire only a few plates instead of wiring all of them. The plates not connected to electricity remains neutral and they are not doing anything during the HHO production process, right?

[@Inventive101]

They also produce neutral gases, they borrow current through the conductivity of water. If all the plates were used, the water would boil

[@lzcamperITA]

@@Inventive101 thanks for the answare! You are right about water boiling but that happen only if the voltage is too much (5V or more). The right electrolysis voltage is 2.5V with the plates really closed. Usually you use 3 volts that are great if the plates are not so precisely close (a few millimeters). At that voltage the Amp used are nearly the same you use with other voltages but the water won't heat and boil. Doing this you are able to connect all plates without have any neutral plate; also the efficiency of the generator is way higher. This is what I know but I'm not a scientist, so if I have said anything wrong pleas tell me.

[@sijojohnson]

both dry and wet are taking same amount of current and output flow rate also same. what about the life. which one have more life.. less corrosion

[@flavatech5938]

Croocky Question: Where do you get the water mix from (distilled water and potassium) Is there a FREE way to create the water mix? Can i use tap water ?

[@Inventive101]

You can use tap water but you have to distill it. I buy potassium and mix it with water. simple

[@stefanpricop4717]

Bravo

[@boringmachinepapabros6063]

Good job !!!!!!

[@TheSivasakthivel]

Which is the best cell?

[@couchyrick6300]

I can't tell how we're supposed to see the difference in production

[@crystalxi4238]

Is the material used titanium plate?

[@SteliosN]

I have seen your videos and other according to them I made this reactor but I probably did something wrong.I have 19 plates each one is 15cm X 10cm and I have two large ones for pressure on the outside.that combination and if I do with the cables the cables will burn but I will have a lot of fuel or the cables will not burn but I will not have much fuel.

[@mikeyharris2999]

Well the completion should be fair don’t you think? When you did the wet sell your flow meter knob was in a different position than it was when you did your dry cell test showed that it wet so actually produced less HHO. If you’re gonna do something like that don’t you think you should have it where you can’t make any adjustments to the or modifications to the test mid video between cuts? Kind of shady.Or maybe not but when your results show with another showing on your flow meter it’s hard to be a decider in the decision

[@varghsan]

Wondering why the on/off knob on the gas flow measuring device is in different position on each on the cell test. On dry cell, i see the + marking on the 10 O'clock position and on the wet cell the + marking is on the 12 O'clock position, which mean the knob is being tightened/closed which prevent free flow of gas. Please re-run the test may be with a digital meter, if available.

[@Inventive101]

Yes, I didn't pay attention to that. The result will be the same, it was not closed just a little bit, these generators do not create a pressure to be prevented by the valve, it was not closed, it was just moved. but when I have time for you, I will repeat the test

[@jesusisalive3227]

Wouldn't a more accurate term be internal and external electrode? For new people dry cell makes it sound like there is no water involved.

[@Inventive101]

Let's just say ... I didn't put that name

[@6cylindertuned]

Please list where I can find these materials. I want to make this stuff but have no idea where to start.

[@Inventive101]

mmm, Most make them and buy them from workshops. Where are you from?

[@nateb4543]

Im jealous of your abilities. Im most jeous of your ability to make things that don't look like shit. Everything i made looks like a pile of shit and shouldn't work

[@mikeyharris2999]

Well the completion should be fair don’t you think? When you did the wet sell your flow meter knob was in a different position than it was when you did your dry cell test showed that it wet so actually produced less HHO. If you’re gonna do something like that don’t you think you should have it where you can’t make any adjustments to the or modifications to the test mid video between cuts? Kind of shady.

[@paraschiviulian8252]

O lucrare frumoasa si curata. Pe cand o instalatie practica de minim 5lpm?

[@Inventive101]

5 lpm este foarte mult, ar fi nevoie de AC. Poate in viitor. Mulțumesc foarte mult

[@Inventive101]

Ai aici un generator ceva mai mare kzbin.info/www/bejne/gXXXqY2ZZ7qKp7c 2-2,5 lpm

[@Inventive101]

De unde din România ești Iulian?

[@paraschiviulian8252]

@@Inventive101 Din galati dar traiesc in italia

[@victorhettinger4412]

I still wonder about using stainless steel mesh

[@anuratj.6544]

what is sheet ?

[@samyvijay9620]

Which one is better dry cell are wet cell

[@Inventive101]

They have advantages and disadvantages. I prefer the dry cell

[@adamgeorge2523]

👏👏👏👏👏

[@Inventive101]

😉

[@qasimabbasi9077]

I wan to buy

[@mhanyvelasco6393]

boss pwede b yan s makina ng mio ska magkano

[@wagiyono1106]

What price this tool?

[@Inventive101]

They are not for sale

[@1misticointolerante]

How can separate oxigen off...????

[@Inventive101]

kzbin.info/www/bejne/Z3mueZmiZZlmn68

[@starofeden9277]

not a good test or fair test same amount of water and same size disks and voltage must be used it seems one has more disks and is bigger so cant compare test is not valid this way

[@thilovonstillfried6278]

🙈 Energetic and ecological nonsense if you don't use renewable energies for electrolysis.

[@sxb8851]

Hi. Great video. Very insightful. Thank you for posting these and other videos. Is it possible to get in touch with you on email? We are working on a low cost electrolyzer appliance and would love to get some advise from you. Thanks!

[@Inventive101]

Thank you. [e-mail]

[@sxb8851]

@@Inventive101 Thanks - That was quick !! Will send you the note

[@Inventive101]

@@sxb8851 Thanks 😉

[@gabrielaplay5598]

❤️❤️❤️❤️👍

[@Inventive101]

❤💕💕

[@jitalsc]

HIDROGENIO: kzbin.info3rJiCPObPj4?feature=share ......... [17/9 5:08 PM] HIDROGENIO: kzbin.info/www/bejne/opnUn4mef5uVjqM [17/9 5:09 PM] HIDROGENIO: kzbin.info/www/bejne/fGeZi6CkmNqWjbM [17/9 5:09 PM] HIDROGENIO: kzbin.info/www/bejne/d6jThqqCp7Jppc0

[@qwertyuiopasdfghjkl2556]

So basically no difference in performance

[@Inventive101]

I will repeat the test, I will measure the temperature of the liters of gas produced and the amperes. I will make it in detail

[@kirkhsin123]

Please get rid of the stupid music

[@Inventive101]

What do you prefer to hear?

[@jakejake708]

Stop stealing baby Einsteins sound tracks😆

[@davef5208]

another corny music, no talking video.

[@user-wv7vd4qf7c]

Nice