540ci 650hp SAS Chevy Tahoe on 42's

Tahoe Tire Fire Friday 🔥 Brought to you by @heavystroker114 This Tahoe can do it all. Pick the kids up from soccer practice. Hit the Rubicon for the weekend with the whole family inside. Tear up the Santa Cruz Mountains, Hollister hills mud pit and trails. Hit the dunes in Pismo and blow some doors on #comphill. Charge the snow in #Tahoe and cruz home on the highway. This is not your Mom’s #chevytahoe
Build Specs-
1997 Chevy Tahoe
Fast injection 2.0 on a 540 motor with Scat stroker kit.
Monster Turbo 400 with reverse manual valve body
4.3 Atlas Transfer case
1410 CV rear driveline
BAMF 45 degree front driveline
42 TSL SX stickies
Battle Born beadlocks
4.88 Gears
Eaton E-locker front diff
RCV axle shafts
Reid Racing Knuckles
WFO HD cross-over Steering and 2" x .250wall DOM tie-rod
AGR steering box
PSC hydro assist steering ram
Fox 2.5" x 12" travel coil-over shocks and air bumps
WFO shackle flip in the rear with 2" Deaver springs
WFO Cross-member and Radius arm kit for 2005 and up superduty axle
Custom WFO center console with Adult Beverage Station
www.WFOCONCEPTS.com

[@anthonycoffey816]

I have a '97 Tahoe on 37's & in need of a complete overhaul after the 4L60E took a shit. Was contemplating selling it but why buy another truck when I already have a solid foundation. Thanks for the inspiration! 😎

[@djfrederick360]

so what did you end up doing?

[@robertstoyles]

That is a amazing build I'm in love I wish I had the money to do it to my suburban

[@ericbryngelson9981]

same man

[@legendary_perfomance]

Just takes time some people can do it in a month it takes some people 10 years one thing's for sure you'll never get there if you don't try

[@meme-cn3ud]

Dammmm. I got a 96. Looks just like it. Wish I had the $

[@ryanmangione5861]

Love this build! My wife and I are doing a solid axle swap on our 99 two door Tahoe.

[@hehateme007]

I’ve seen all your rigs but this one is my favorite. Great work over there at WFO

[@romeshter]

WOW, amazing work gentlemen!!! That thing looks awesome.

[@RamTahoe]

I had a 97 Tahoe that I had similar plans for........never happened but you guys killed it 🤘

[@jeffsmith3288]

That console is AWESOME! flips the switch it fires to life and throwing mud! That is RIGHT ON!

[@greenstuffOG]

This pleases the Chevy gods 👏👏👏

[@mauichevyracer]

Dropping a 671 blown 454 in my 97 Suburban, and this lift would be awesome to finish the build! Looks sickAF on 42" tires!

[@mr.a9647]

Nice man! I thought I was the only one that drinks Coors! Beautiful truck! Saludos!

[@JeremyFrazelle-or1mt]

Hands down my favorite rig to come out of your shop.

[@keithcrawford455]

stacking dimes... beautiful.

[@bowtie-man]

I can only give you 👍👍 because I only have 2. The olé girl is definitely a sweet ride, congrats to the owner. And to the builders, y'all boys nailed it👍👍👊👊👏👏👏👏✌✌

[@texasrider4D5]

Jeez! My volume won't go up any higher! Lol that 540 sounds amazing.

[@greenboyatgafarms2250]

Damit man i got a HO just like that just needs the kit in it now. Super clean build I love it👍

[@Quackerstacker1973]

I just bought a 95 burban yesterday and this video is recommended today I think it is some kind of a sign I think this is in my future

[@djfrederick360]

DO IT

[@tylermerkley3055]

you should make a bolt on kit for 99-06 1500 chevy and gmc.

[@makingtechsense126]

Motivation to clean out my garage so I can get started on my OBS truck. I have the truck. I have the axles. I need the WFO parts (and the garage space to build it).

[@joshmiller1928]

Great build!

[@adamforman9264]

Rocking the style WestCoast....😎✌

[@jackofalltrades4529]

New drinking game…. Take a shot every time they say party

[@adamforman9264]

One of my favorite suburbs 😎✌🇺🇸🍕🍺

[@dante04srt]

Just picked up my 05 D60 axle for my K3500. Going to be ordering some parts from yall in the next couple months to get things swapped over.

[@c.opiela]

Sweet ride gives me ideas to do same with same year tahoe

[@nimoanuario4196]

Oh man that kit would look hell of good on my lifted 2003 Yukon xl

[@treechase4705]

i got an 03 yukon denali. 2 inch level front 1.5 rear on 285s.

[@craigengelman4534]

2003 Yukon xl on 5 ton axles with 16.00 R20 XZL tires

[@Mike-xn1bh]

Wow, look at those dimes 👍🏻

[@johnsonsecure2976]

My son would love this tahoe

[@dougreynolds6930]

That thing is sweet. And someone who uses it the way it should be used.

[@dansgaragebuilds3086]

Cannot wait for you guys to get ahold of my k10!

[@chrisvozza6530]

Beautiful 😍😍

[@magnithejeep1865]

i want one LOL!! well done!

[@cgscprspecialist3937]

Great build love what you are doing!

[@wfoconcepts]

Thanks

[@justingriffith2991]

@@wfoconcepts is. Foor. We

[@justingriffith2991]

@@wfoconcepts is it floor sell

[@justingriffith2991]

@@wfoconcepts ÷

[@RichardSmith-ic1zw]

Wow that's awesome

[@ChevyHalfTon]

Nice! THATS a Tahoe!

[@trakyboy5128]

Nice Good low end torque !!!!

[@colew.5956]

Chevy Tuff with Ford Stuff💪💪💪

[@fivestar8337]

I know it's probably gonna wind up with some type of fabricated/tube front bumper but the 3500hd trucks have a filler panel that would fit below the grille and clean up the front a little bit

[@boneal4942]

So awesome 👍🇺🇸

[@mr.mycity313]

8:15 absolutely fn beautiful!

[@SlimboJimbo]

Those welds ❤️ my Lord

[@francisco-javiergarcia4264]

I have a 99 chevy tahoe also would look dope side by side lol

[@joshmiller1928]

Ford axles on a heavy Burban? Nice.

[@WS1_AUTOS_N_STUFF]

All I want for Xmas is 800 ft lbs of torque 👍

[@codyhammett9297]

Can I ask you a question what kind of headers you have on your Chevy Tahoe i want to put a 540 Chevy big block in my 95 Chevy Tahoe but don't know where to get them thanks

[@marktrujillo6401]

Remember when trucks came factory with strait axles

[@edub5828]

WoW Fuc*N BadAss Burban! Throw in ah FullCage too;)

[@jeffleblanc8850]

You put some work into that would love that motor in my dually awesom truck l oven the motor and tranny with the manual reverse would love this motor in my dually like I say love the truck it looks awesome

[@CTC540]

That's sick were do I start to get an engine like that lol

[@LongGun223]

Gnarly!

[@22ron81]

Hell ya

[@jonnylowkon]

Is this kit available for the gmt400’s? I looked on the website and it’s not listed. My 95 2door must have this!

[@trevorconway2889]

I literally just came in my pants😍😂

[@zebrakid2]

The rear front bracket is that the original bracket? Or you guys make that one too?

[@FrigidFrosty]

I have a 99, I'll let you know when I want to do my 99 and you can do it too

[@dante04srt]

Curious what hood that is. Profile looks good!

[@ghanascam2412]

MURICA!!!! fuck yeah ✊🏿🔥✊🏿

[@dieseladdict6685]

That is one mean Tahoe. Will you be putting a radius-arm kit for the obs Chevys into production? If so, will the crossover tube be necessary?

[@wfoconcepts]

With so many different options (Front axle, Transmission, T-case) its hard to put a full kit into production. But if you give us a call at the shop we can go over your build and get you set up.

[@bthompson1767]

I want to do this to my 2010 Ford expedition

[@allana5930]

F-350 rear shackle mounts work perfect just remove the Chevy shackle Mount and end repo F350 drops it almost 6 inches just from the mount.

[@adf286]

How much did this cost? Parts and labor combined?

[@juanmata4044]

How much would it be to make a thahoe 2005 4x4 just like yours?

[@michealponce3112]

What was the spring rate on those coilover? 300/?..?

[@originalgameronline3457]

Roads?? Where we're going..........we don't need roads!

[@jeromeburrasca6710]

Can you do this to a 2011 1500 4x4 Suburban LT? It’s already on a 7” lift and 35s. How much $$$$$$$$$

[@roxastherogue]

Im trying to do this with a 01 tahoe and i need help

[@jesseharriott4253]

I’m running 37”s on a stock front end (pickup) it rides like $&@? Lol ball joint flip cranked torsion bars and 3.5” blocks in the back and a 3” body lift lol Off road it’s decent with a nv4500 but don’t steer to far frame doesn’t like it haha. Man that Tahoe is making me feel a bit jelly lol

[@courtneychappell8801]

America 🇺🇸

[@kyledean6659]

Great build fix the windshield i,m OCD BAHAHAHA

[@spartarome8807]

How much does all of that cost?

[@williamlowerysr5436]

hay i have a 99 yukon can you build me the floor shifter kit

[@2219taylor]

Let me know if a kit ever comes out for the obs. I have one lifted 8in wanna do swap just waiting for right set up like this

[@brantlyadair5495]

this is an obs, they make a front shackle kit for these trucks already

[@liberty4617]

what are the front spring rates

[@MrGabrielJude]

Wow

[@Hoops420]

How much does a build like this cost? Sure would be sick

[@spartarome8807]

How much did all that cost?

[@yohan2516]

What's a ballpark figure of this build cost$

[@bamseals4126]

How much are these kits

[@greenboyatgafarms2250]

So whats the axles cost???

[@carlossalazar2164]

Just a random question just the axle an suspension work what's the price tag on that?

[@iampkhacker]

a shitload. probably least 5 grand per axle. another 5 grand minimum suspension.

[@chriswhitaker9344]

Does the front and rear have a different lug patter how did you tackle that

[@wfoconcepts]

No we re drill the factory ford front unit bearings to 8 on 6.5.

[@danmcelroy6584]

😮😲👍👍

[@kalindanley2843]

Who the hell can i pay to put 1 tons under my 05 escalade? Around Sacramento area.

[@jwkustm]

Do you guys build these or was this just for your friend?

[@dandridgefamily4431]

Woah

[@banga8080]

👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾

[@joshshelby7322]

Thats bad ass what does the sas run for the front

[@wfoconcepts]

Give us a call 530-268-9494 ext 1

[@UR2Compliant]

You guys mentioned Crusty Demons… Do you guys know Scotty Avalos?

[@cencoast_7.340]

He wrote songs for Elton John did he not?

[@mopar4life458]

One bad ass toy gas is dirt cheap right drive it daily

[@headlesnorseman701]

How does it ride and flex with that leaf/radius arm combo?

[@wfoconcepts]

Wheels right through the Rubicon and drives down the highway at 75+ no problems. Super stable.

[@headlesnorseman701]

@@wfoconcepts awesome. I’m doing almost this same swap in a k5 blazer. SD60 using the Ford radius arm mounts and 56” rear leaf springs

[@22ron81]

What is the schedule for four link

[@cencoast_7.340]

Usually takes about a week I think

[@Joehatrix]

May I ask what was the budget for this build?

[@Donmud]

joehatrix well I don’t have that motor but a similar set up at least build wise some different parts on mine . Mine is a budget build compared to this thing and I got 13k in mine

[@evanjessee]

I am married so i cant say!

[@channghiem5012]

What transmission . 4l 80E?

[@evanjessee]

th400

[@wfoconcepts]

Turbo 400

[@BigPaulsGarage]

Kit part number?

[@cencoast_7.340]

Lol

[@ghostdragon5758]

I want 800 ft lbs 😮

[@jesseharriott4253]

Just immediately removes some rear traction capability lol

[@kevinwest3689]

This is like going to the strip club" i feel like I'm going to need a little ME time after watching this. 😏

[@terrylacombe7813]

Yeah, it looks good in the dirt, what about the mud? Where's the mud? Show us how it does in the deep South mud!!!!

[@justinwillis7231]

Putting music in it was a bad choice! Should have let the motor do that part

[@fortnightgamermoisesf479]

I’m dying to know how much he’s in to the build

[@dkhill27]

Figure about 20 to 30k into it total

[@evanjessee]

I am married so i cant say!

[@cencoast_7.340]

@@evanjessee again

[@dkhill27]

@Duke That would be the best way. Build it and install it yourself. Still will be in it over 10k to 15k in parts alone id say.

[@boogieloose4852]

Thats right! Fix that chevy with ford parts!