What All Can You Engrave With The Laser Pecker 2? Tumblers, Wood, Bags, Cutting Boards and More!

Today I am putting the Laser Pecker to work and engraving even more.
What all can you engrave with the Laser Pecker 2?
Laser Pecker: Back To School 20% off Promotion
www.laserpecke...
Laser Pecker Unboxing: • Small but Powerful | T...
Heat Transfer Warehouse Link!
Sublimation blanks, HTV, printers and more!
heattransfer.o...
My Amazon Business Supply Store
Affiliate link (I do earn a small commission when you shop my favorite business products!)
www.amazon.com...
Creative Fabrica All Access for Designs, bundles, templates, fonts and more!
1st Month $1.00 Subscription Special
www.creativefa...
HPN Signature series 16x20 Heat Press, Tee Square It Ruler and Logo Pocket GRID and more! (Look Under Heating Supplies to find it! It comes up!
shareasale.com...
Ricoma Embroidery Machines
ricoma.com/US/...
Ricoma Heat Presses
shop.ricoma.com?referral=katrina-bacon
Follow Me on Social Media: @Katrinasgracefulcreations
I do earn a small commission through things purchased with my Affiliate links which help support the channel! Thank You in advance!

[@ProfessorShyguy]

this is the kind of content I WANTED for this thing!

[@psalms91customs]

Girl!! You got me hyped! Now I got to save up for a laser.

[@katrinasgracefulcreations3711]

It’s really great

[@carleneparker740]

Ooooh... Something nice and small to start with that doesn't take up a lot of space...hmmm, I'm liking this..Thnx for sharing

[@katrinasgracefulcreations3711]

You’re very welcome

[@Justin-bo5pg]

It's a nifty little machine. There's not a lot of bang for your buck. I've got the xtool 10w and infrared head and a 40w ohmtexch I use for all my big stuff. I bought the laser pecker 2 with the battery pack and the roller to be able to engrave onsight at craft and vendor fairs and it does ok. I don't really use it in the shop because I prefer using lightburn. The rotary/roller accessory allows it to do a much bigger area then the 4 by 4. But this little guy is perfect to do tumblers and coasters on the spot. Out the door I paid a little over 1300 for the whole pack and it paid for itself in an afternoon.

[@DoctorColg8]

In the slab or trolls mode, your still limited to

[@DoctorColg8]

Monogrammed leather gloves are a great seller. Place an internal wood form to stretch the wrist elastic (use butterfly clips to flatten the stretched material).

[@jazziejazzbucketlist]

Omg I've been looking all day for someone to do a metal tag on this machine..You are amazing 😭💕 Thankyou for all the good information 🙏🏾

[@katrinasgracefulcreations3711]

Glad to help. You’re welcome

[@raygarcia4062]

Just a great video, been looking for someone to do real material instead of what was sent in the box. great review. Loved it.

[@ladyhamilton5179]

Wow, that is nice. I've been doing mine with a paste. Thank you lady.

[@mrtrixx2002]

I noticed you had the same issue as me when I got mine and that was placement of the image you want to etch and how to get it where you want it. If you haven't discovered it yet, when you put the image you want on the screen in preview, you can, with your finger on the image, move the position of the lazer on the object you are working with. Hope this helps on all your future projects!

[@aldarubio3622]

Hi ..what settings did you use for the tumbler?

[@soulenergyartsartistmariam8086]

So awsome Katrina! Love all your videos! You rock!

[@katrinasgracefulcreations3711]

Thank you

[@robinlosee3411]

Awesome! My favorite item is the tumbler. Thanks for sharing!

[@katrinasgracefulcreations3711]

Thanks for watching.

[@lynx9797]

Good job Katrina. Very educative. I have ordered the same coz of your tutorial video. Laserpecker better give you some bonus.

[@katrinasgracefulcreations3711]

Hope you enjoy it.

[@cedaroakfarm8596]

Good practical application demo. My only suggestion is to wear a mike. For those of us that are hearing impaired, it will help hear and understand you better. Your voice over is perfect. The various materials you used show the versatility of the LP2.

[@swtxvi3txhuni]

i'm so excited!! ty girl!!

[@ninaanne4329]

❤❤❤🎉🎉🎉 Awesome Video! Thanks!

[@juliegayson7947]

Thank you and tumbler my favourite

[@katrinasgracefulcreations3711]

You’re welcome

[@lindatroy2123]

Adding the Lazer Pecker to my list of must have! I have so many ideas! I was wondering about the depth of the image on the cutting board. Is it too deep to sand off to give a new surface to re do it? On your bible is it deep enough to cleanly apply some acrylic paint to give it an even colour and make the name stand out, or just to add a colour like gold or silver etc?

[@HeavyWeightHank]

Total mom move putting his middle name 😆 love the ideas with this laser machine

[@katrinasgracefulcreations3711]

Thank you definitely a mom move

[@josephKEOarthur]

love this. - oh BLUE painters tape is your friend. (to prototype work -- at a very low setting) for alignment.

[@KLAB_Radio_Vegas]

Great Video! U have made up my mind about ordering this laser

[@johnclore6285]

I had the Pecker 1 and updated to 2. You have more setting on your app that I do, so I downloaded the LP2 app. I am having problems with cloth. Love this vid.

[@bdinvestments7682]

Game charger..love it

[@katrinasgracefulcreations3711]

Thank you

[@zeldadevilliers2711]

Awsum thank you. Can you please give the settings for each item you did

[@JustinMoritz]

Thank you for sharing!

[@katherinespangler4495]

The rollers let the lazer roll across surfaces. I seen that on KZbin. It was awesome.

[@DoctorColg8]

Tully (rolling across the medium) or slab, rolling the medium across the platform modes. Make sure to click the 3rd axis button when using the roller

[@russellloomis249]

Been using this for about 3 weeks, the app freezes up constantly and I have to restart my phone to get it to work again and the USB will not connect to my PC, installed all the drivers, restarted etc... very frustrating, when it works, the images are clear, but if you're trying to do let's say 100 tumblers, OMG very frustrating.

[@borial1006]

You know wat u should try on the book bag cut a long square of white htv and try to ingrave on the htv after u press it on the book bag to see wat happens

[@user-vb1kz1ud4m]

Hi. your videos are amazing, super clear.. i would like to know how do you insert the image on the phone that it should come up on the working space?

[@milo88mori11]

Nice!! Make sure you have a well ventilated area while using this

[@Tom-jf4vg]

Great job.

[@ruthshellnorth-troup7351]

So you can’t change the Color that the lazer will print?

[@katrinasgracefulcreations3711]

No it depends on the material

[@wendydawson8886]

Wonderful!.... Now let's talk about your energy, Wrap it and market the heck out of it, because your sells will definitely make you a million dollars in one week ❤️ I love your energy because it is so inspiring...... You love for your son and your craft is so refreshing. Thanks for blessing my day ❤️.

[@katrinasgracefulcreations3711]

Thank you so much! Truly appreciate it. He drives me crazy, but I do love him.

[@chriscapo82]

There is laser paper that you can use to add color. Seen being used on Metel mug.

[@allainat666]

You could feasibly do the top of the laptop… 😍

[@allainat666]

Faux Leather too? This looks like fun :)

[@katrinasgracefulcreations3711]

Yup definitely

[@alamomonkey]

Be very careful with faux leather… if it’s polyvinyl based, the fumes can be very toxic... as well corrode anything metal nearby. Anything vinyl/PVC is very dangerous. Chromium-tanned leather should also be avoided.

[@allainat666]

@@alamomonkey thank you much! I may be. A fan from a afar. You did a great job :)

[@jakerazmataz852]

I love the speed and size of the laser Pecker. I was thinking of an xTool 20w to start. But I think a laser Pecker 3 metal engraver would be a more profitable start. I could always get the xTool later for bigger projects.

[@katrinasgracefulcreations3711]

Yeah I love the Xtool The laser pecker is fast though and great for all sorts of projects

[@mkrp4]

Cutting board look the best!

[@katrinasgracefulcreations3711]

Thank you I loved it!

[@HeavenLeeMadeOnEtsy]

Maybe if you covered the area with some low tack tape? you can get a better engrave on the folders? I'm sure you have some embroidery tape somewhere.

[@Jawsjawsjawsrg]

(19:08) Actually that laser threw is an opportunity. You can put a patch behind it, glue/ sew it on and make it more visible.

[@katrinasgracefulcreations3711]

Awesome idea thanks

[@nancyferrer7703]

Use rubbing or denatured alcohol to wipe the burn spray clean from your wood engravings.☝🏼

[@valariemendoza5270]

Is that as big as the pattern gets or can it cover the whole cutting board

[@kohei9157]

Biggest size it can do is about a 4x4 inches

[@wendydawson8886]

Favorite

[@KarenValladares]

Do you have information about the safety of this device? What about the fumes and our health ? I will appreciate if you have any information, thank you great vídeo!!

[@altgoz]

Hi, I have a similar concern for the fumes. I did a quick Google search. Every material you want to laser engrave, you should research what VOC and other nasty stuff is produced by burning it. Some plastic and leather produce poison fumes and cause an acid burn in the lungs, when inhaled. I don't want to scare anyone, but be careful by angraving some materials. I will do my angraving outside or with an active charcoal filter, just to be save and I'm still researching it. I ordered an Woodpecker 3 on kickstarter and can't wait, when it arrives. Happy and save laser angraving everyone.

[@brianlewins9825]

Thank u x

[@katrinasgracefulcreations3711]

You’re welcome 😊

[@torodatruth]

lolllll it stressing me out that everything is a little crooked .... but the laser looks like it works great!! lol

[@danpettis1675]

THE LASER PECKER😂😂😂😂😂

[@SushiTimes2]

On a Tumbler: How do you center exactly where you want the logo to come out? It seems like it places the logo from left to right. I can't find any videos describing or showing how to make sure your clip art is centered and going to come out right where you want it to. Can you help? or Can you make a detailed video on how to do it?

[@rachelavila9461]

Does it do colors?

[@capturedbydaisy5446]

Question, how is the smell, don't you need a good ventilation? thanks

[@joseespinosa7500]

If your looking for how to do the cup: ===> 14:30 😊

[@FRANKSMITHIII]

Trying to engrave on a stainless steel tumbler and its NOT showing up at all on it. The tumbler is black on top of metal. Any suggestions?

[@jolandaisland6779]

So when printing on black it doesn’t show up very well.

[@katrinasgracefulcreations3711]

No not really

[@wilddestroyer8927]

Could you help me please, Im trying to engrave flask water bottles but I can’t seem to get the design to go around the whole bottle and the preview for it only shows a line without it turning the bottle and showing me exactly where it is going to go

[@bouletgulianna920]

Is it possible to add colors on the graving?

[@mikorey2917]

FYI, according to my calculations you are at least 2 months ahead of every other channel 😊😊😊 snaps to you girl (I don’t think there is a snap emoji) so I will just go for 🌟 🌟🌟

[@katrinasgracefulcreations3711]

LOL. Thank you. I gotta try to stay ahead. But we all do similar things and then we each do separate things as well. I try to always bring a great variety on the channel.

[@robertowens1716]

when engraving thd tumbler did u get the font from the lazer pecker app or from computer

[@latongieholland8372]

Looks good! Can you use foil to add color with the laser or maybe the powder?

[@killking37]

what settings for tumbler?

[@HeavenLeeMadeOnEtsy]

do you think it will do stainless steel jewelry?

[@mynamesedwin]

So the video is 7 months old or so now. I’m curious how the tumbler’s paint is holding up around where it was lasered off. Did burning/lasering the design into the paint make the remaining paint chip or flake at all?

[@katrinasgracefulcreations3711]

I will do an updated video or show it on my shorts. It held up very well.

[@Lisl_Harrington]

Hello - I was wondering did you use a certain co to get your business license ? Thank you and have a beautiful blessed day

[@borial1006]

Girl I love ur stream love you I have a favor can u test it on leather I would like to make some patches for hats thank you also I subscribed

[@katrinasgracefulcreations3711]

I did leather tags in the previous video my unboxing. You can check that one out.

[@TheLadybugJr]

And the Bible… wasn’t it leather too?

[@Michael2x]

She sho is pretty!!!

[@katrinasgracefulcreations3711]

Thank you

[@privat3480]

Hello. Great job. Which font do you use for the tumbler?

[@katrinasgracefulcreations3711]

This was a while ago...I believe this was just an svg....not a specific font.

[@thepaintedladiesllc1899]

Hello! I’m excited to get one. Have you tried it in glass?

[@katrinasgracefulcreations3711]

Not yet!

[@user-oc6jx4lu5y]

Hi, did you tried in Glass yet?

[@michelesol5425]

Can you do color fonts at all? This may be my next gadget! :)

[@katrinasgracefulcreations3711]

No the laser only engraved onto the product and that will determine the color which is the base of the product

[@ambercollins8907]

I’m curious have you engraved on acrylic? And if so what settings did you use?

[@katrinasgracefulcreations3711]

Yes I have I have another video but all the settings are in the app when you use it. You just choose the material

[@One-ct3xe]

How is this on glass? Say a crystal ball or wine glass?

[@brokenempath]

How big of an area can this engrave?

[@katrinasgracefulcreations3711]

Sorry I don’t have exact measurements please click link in description box

[@joegier5936]

How long is it taking you to do tumblers? I have an XTool and about that size image takes about 25 minutes

[@katrinasgracefulcreations3711]

I can’t remember I should have tuned it. But about the same time. I’ll be unboxing the XTool as well

[@ginorassem6659]

@@katrinasgracefulcreations3711 i tried to engrave on a stainless steel tumbler but did not come out well as yours . what settings did u use please ..and thank u

[@WhisperGentleman]

Can you engrave on body parts

[@katrinasgracefulcreations3711]

is that a legit question. lol

[@WhisperGentleman]

@@katrinasgracefulcreations3711 no

[@wendydawson8886]

The metal tag for Kayden and the cutting board were my f.

[@katrinasgracefulcreations3711]

thank you

[@spiritsculptor]

I ordered my pecker laser I'm waiting on delivery

[@katrinasgracefulcreations3711]

Awesome.

[@abrahanosorio6470]

Puedes grabar en metal

[@agnes-positivethinker8188]

How about white on black

[@JosChaMab]

Now why these people named this thing the "Laser Pecker"???? lmao, playin' too much!

[@katrinasgracefulcreations3711]

Lol.

[@ErinCastle]

I know this video has been out a year, but in future, please don't post videos with your children's full names and school names/logos visible. It's a safety risk and makes them more vulnerable to potential predators.