What happens if you unplug Component Video cables?

Component Video uses 3 RCA connectors colored red, blue and green. You may be forgiven for thinking that these carry red, blue and green color signals, however this is not the case. The green connector (Y) carries the luminance signal, the red connector (Pr) carries the red deviation from the luminance and the blue connector (Pb) carries the blue deviation from the luminance.
On-screen text: drive.google.c...
Song: Lost Sky - Need You [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: ncs.io/NeedYou
Watch: • Lost Sky - Need You | ...

[@Wave_Duck]

Grandma trying to figure out why her TV isnt working properly

[@acpifixedfeaturebutton]

Lol

[@acpifixedfeaturebutton]

Karen complaining why her TV isn't working properly: TV seller: You plugged in the wrong cable! Karen: I W A N N A S P E A K T O T H E M A N A G E R

[@instapublish]

@@acpifixedfeaturebutton Karen's faulty

[@yeppiidev]

@@instapublish replace the Karen or buy a new one if the old one's faulty. maybe try restarting it

[@acpifixedfeaturebutton]

@@yeppiidev lmfao xD

[@coopercummings8370]

You would see more interesting results if you tried this out on an old CRT tv, the lcd is converting it to digital and giving an error when you do something completely wrong, but the older crts don't have digital logic to check if they are getting a valid signal (besides some of the later HD sets and 100 hz sets in PAL regions) and would try to display the signal even when you had no luma signal. You would most likely get a red and/or blue image that distorts and moves erratically across the screen without the green/y/luma cable connected because that one also carries sync data telling the tv how quickly to sweep the beam across the screen and when to go to the next line

[@archivushka]

These are the kind of questions keep me awake

[@AshtonSnapp]

the kind of questions that keep me awake are “how the hell do i implement procedural map generation”

[@mikelitoris7272]

Literally?

[@blurem1490]

So i just woke up at 5 am from a 11 hour sleep and now I'm on youtube watching a man unplug and plug some TV cables. This is entertaining.

[@joawesome2319]

This takes me back. I used to do this to our cable box when I was younger. It was hooked up via component and used to switch around the colors of the rca cable to see different effects. Soo fascinating :)

[@TheGlitchyMario]

This was more entertaining than i thought.

[@MintleafCakes]

all of the different results you get are really neat! i've never personally thought to try mixing and matching the cables, lol, so i had no idea they could do that

[@namesurname4666]

Had an issue that the colors would show wrong (blue) when connected on component, one of the input pins was loose

[@raaymonf]

2010's kids trying to figure out how to use TV

[@ZetsubouMar]

I...didn't even know that composite cable could be used as component cable.

[@tredI9100]

The cables are intended to be used to carry a composite video signal and stereo audio, but they are just electrical cables and can be used to carry any signal. I once used an audio cable with 2 of those connectors to carry the composite video and audio signals from my NES to my TV.

[@rotatingcat1957]

@@tredI9100 I ran my famiclone on component signal (idk how but i was playing with the AV connectors on components and i somehow ran it at B/W 240p signal)

[@shakyshakeqs]

cable on ypbpr meaning: y = contrast, sharpness, brightness pb = blue, magenta, yellow color pr = red, green, cyan

[@specowos]

great way to theme your tv!

[@thisistaylorswift1293]

3:39 I saw the The Man Music Video by Taylor Swift!!! Edit : I remember when I'm connecting the component cables in the wrong way when I was a teen 😂 thanks for the informative video!

[@areboy2020]

Themes between Blue, Purple, Teal, Green, Orange, and Lighter Purple!

[@gallium-gonzollium]

How high shall we put this?

[@Im_Sok]

What if you connect composit video cables into component?

[@Odswietny]

1:25 The delicate lines you see on the screen when you touch the end of the Pb/Pr cable of Component Video are likely caused by interference or signal degradation. Component video cables transmit analog signals, and any disturbance or interference introduced into the cable can manifest as artifacts on the screen. When you touch the cable, you might be introducing electromagnetic interference or disrupting the signal flow, leading to those lines appearing on the screen.

[@JustJaidenism]

Well, now I know how to emulate analog TV.

[@_GhostMiner]

That's not what analog tv is. It's just an analog signal displayed on a digital tv

[@HanzEf]

you can also try it on an old CRT TV but it only has audio and video slots

[@james66787]

Very nice demonstration.

[@DeltyBRO]

I remember when my wii screen was gray, so i checked the cables and fixed them lol

[@World_of_OSes]

Was it connected via Component Video?

[@immasenne]

2:19 perfect colors

[@CheungCharlie]

thanks that was helpful. I'm working on YPbPr HD camera and I'm not getting any picture, so i'll check the power and Y signal first, it good that you test the connections in the Composite/CVBS/AV.

[@TheProGam3r]

Corrections: 0:24 and 2:20 Compsite and Compostie to Composite

[@mikelitoris7272]

Screw digital! Analog is way more fun and much more interesting.

[@SOTP.]

Seems fun to try.

[@TheProGam3r]

You: mom, can we get a tv? Mom: we have tv at home TV at home: 1:01

[@realcartoongirl]

i never know i needed this

[@Sonic21Rus]

Blue turns red and red turns blue? I saw something similar in Nero Video - there I can switch among 6 color schemes - RGB (all colors stay), RBG (green and blue switched), GRB (red and green switched), BGR (red and blue switched), GBR (red turns green, green turns blue, blue turns red) and BRG (green turns red, blue turns green, red turns blue).

[@namesurname4666]

What is the device you connected? The ui is the exact same as samsung tv media play from around 2011

[@World_of_OSes]

2011 Samsung Blu-ray player / hard drive recorder box. It's usually connected via HDMI, I only connected it via Component to make this video.

[@namesurname4666]

@@World_of_OSes where does it record from? Does it use a composite input and saves to hdd like a dvd recorder? What's the video format/codec used?

[@World_of_OSes]

@@namesurname4666 It can record live TV to it's own internal HDD.

[@namesurname4666]

@@World_of_OSes so it doesn't work as a capture card? Just records digital tv without encoding?

[@World_of_OSes]

@@namesurname4666 It just records digital TV without re-encoding.

[@casedistorted]

I have a Sony Trinitron CRT and am trying this stuff out now

[@_GhostMiner]

Reject digital, Embrace analog! 😀

[@danieldemayo6209]

What device are you using here? I’ve never seen something that lets you use composite and component together (not switching inputs) like that. Then again I’ve never tried it haha

[@feliperafael8104]

thx for the tests, it saves time

[@World_of_OSes]

Were you planning to try this yourself?

[@shakyshakeqs]

the “pr” sends “red” signal, “pb” sends “blue” and “green” signal, and “y” sends the “contrast”, “sharpness”, and “brightness”

[@thany2010_]

1:54 and thats how RGB to BGR is made

[@Mr-AlexGB]

All text from the .txt file. "Component Video uses 3 RCA connectors colored red, blue and green. You may be forgiven for thinking that these carry red, blue and green color signals, however this is not the case. The green connector (Y) carries the luminance signal, the red connector (Pr) carries the red deviation from the luminance and the blue connector (Pb) carries the blue deviation from the luminance. I don't have any Component Video cables, so I am going to use Composite Video cables instead which have the same connectors but are different colors. I am going to use red for red, white for blue and yellow for green. When all 3 Component Video cables are plugged in correctly, the colors on the TV look normal. If I unplug both the color cables and leave only the luminance cable connected, the TV goes grayscale. This is what happens if I plug in Pb but not Pr. This is what happens if I plug in Pr but not Pb. If I touch the end of the color cables, it makes faint colored horizontal lines come up across the grayscale image. If I touch Pr the lines are red and cyan, if I touch Pb the lines are blue and yellow. What happens if I plug the color cables in the wrong way round? Blue turns red and red turns blue, green stays green. What happens if I unplug the luminance cable but leave the color cables plugged in? The TV says 'No Signal'. This is what happens if I plug the luminance cable into the Composite Video port and leave the color cables plugged into the correct ports. This is what happens if I have the luminance cable plugged into the Composite Video port and unplug the color cables. What happens if I plug the luminance cable into one of the color ports? The TV says 'Mode Not Supported'. This is what happens if I plug the color cables into the Composite Video port while the luminance cable is plugged into the correct port. This is what happens if I plug the color cables into the luminance port while the luminance cable is plugged into the Composite Video port. What happens if I plug the color cables into the audio ports while the luminance cable is plugged into the correct port? Nothing while in the menu because there is no audio. If I switch to live TV which has audio, there are colourful horizontal lines across the grayscale image."

[@DEADCHANNEL361]

I connected green into yellow On the Av ports on the tv and it’s black and white

[@NutScrewGamer]

I like the color geen! (0:25 for reference)

[@dnb5661]

Me too

[@NutScrewGamer]

@Jacob A. GIRON e

[@mikelitoris7272]

Why is there no green deviation?

[@World_of_OSes]

No need, green deviation can be calculated from luminance, red deviation and blue deviation.

[@eUploads]

Analog is very fun

[@sm3dwnftwofficialsaveukrai289]

What system do you used for plugging in Component Video in wrong way?

[@_GhostMiner]

*did you use Prolly some converter from analog to to digital or smth like that

[@techtechnicalgaming]

Please do same thing with composite video

[@Ilikebred]

I’ve actually always wondered tbh

[@FutureDarkBassOfficial]

What’s is his music name

[@sonic_enjoyer]

i remember doing this with my xbox 360 when i was younger

[@TransgenderSunflower]

if you swap the PB and PR, it becomes RGB to BGR

[@tl1882]

nice to see another kiwi

[@arandomworm8713]

What is the model you are using? (Number and device you used in this video)

[@ahmdhadi7493]

samsung smart tv but older model (?)

[@arandomworm8713]

@@ahmdhadi7493 oh ok

[@prililacreatore130]

The real question is "Whats the right RGB signal?".

[@World_of_OSes]

Component Video uses YPbPr, not RGB.

[@randomgamer6290]

Next video title: What happens if you unplug AV Cables?

[@ThuyNguyen-xk2rg]

that’s very easy

[@KoenDoesThings]

What set top box is that?

[@World_of_OSes]

BD-D8500A

[@Nonje4560]

What was the device used to do this? If it was me i whould have used a PS3

[@World_of_OSes]

2011 Samsung Blu-ray player / hard drive recorder box. It's usually connected via HDMI, I only connected it via Component to make this video.

[@arandomworm8713]

Whould?

[@ners_xd]

woah this is cool

[@some1-1038]

Using Composite wires on Component feels kind of illegal.

[@marisakirisame867]

the only way to destroy tv gently

[@slavakid5336]

does not break the colors system cool

[@SquaredFe]

Good video!

[@EestiDorito]

What type of Samsung set top box was

[@World_of_OSes]

BD-D8500A

[@EestiDorito]

Thx

[@cashwood]

Hello New Zealander!

[@World_of_OSes]

How do you know I'm in NZ?

[@Odswietny]

@@World_of_OSes Channel Info I guess.

[@imSomebody-m4c]

nice dude

[@MuscularPuky]

3:02 3:12 i think they look like shadow

[@YenNguyen-it1ju]

YCbCr. not YPbPr

[@Pyry300]

I have that exact model Samsung tv box that i only usefor dvd nowadays

[@anisalial-maghrabi3215]

Wow

[@Povilaz]

Huh interesting, never knew about component connectors, only about composite. But they look practically identical tho so hmmm

[@_GhostMiner]

But component needs extra pair if audio cables because it only transfers picture

[@steve_1507]

LOL, I have the exact same SAMSUNG TV! I use it to play GTA 5 on my ps3

[@World_of_OSes]

How do you know that it's the same one?

[@alooyeg]

@@World_of_OSes my guess is it looks the same

[@steve_1507]

@@World_of_OSes The back and style of component input

[@Stennishh]

sicc

[@trashvirus8500]

wow

[@sreerag_]

Haha, here in my DVD player I have AV (3 pin - Yellow for Video, Red and White for Stereo) and my STB and Smart stick use HDMI. I have a LG (2017) TV and I switch to Composite (RGBYW) it shows Black and white (with audio) so I switch it to B&W for movies that are corrupt I plug in AV and I switch to Composite mode (5/6 cable pin)

[@alooyeg]

6 diffrent colors

[@Galaxy.Windows]

that is a Samsung thing?

[@World_of_OSes]

Yes

[@Galaxy.Windows]

@@World_of_OSes what samsung device it is??

[@World_of_OSes]

@@Galaxy.Windows BD-D8500A

[@secretshrek]

Wait I have same tv

[@russianyoutube]

Lol nice

[@erikas8781]

don't you mean by AV cables?

[@commonlibrary2]

Do you mean Analog Video(AV) right?

[@erikas8781]

@@commonlibrary2 yes

[@commonlibrary2]

@@erikas8781 yeah, it's the same thing. in my country we called AV cables too.

[@afriend9428]

*Audio + Video* 💡

[@yeswindows8.1]

this is AV

[@tl1882]

no av uses 1 wire for video

[@yeswindows8.1]

@@tl1882 oh ok

[@rnicoles9355]

1st December You know what's that? Hint: 🇷🇴

[@bettafish541]

The end of NNN

[@rnicoles9355]

@@bettafish541 no, try again

[@bettafish541]

@@rnicoles9355 The end of NNN

[@rnicoles9355]

@@bettafish541 try again

[@bettafish541]

@@rnicoles9355 The end of NNN

[@dikigalih1993]

Hello

[@07whaleboy]

First

[@ShaggyCZ]

What if you unplug your pc, while its running a game

[@CHUNKOS]

.

[@CodeByteCrafter]

3rd

[@07whaleboy]

Nope! You're second!

[@CodeByteCrafter]

@@07whaleboy nah when I saw this video there was 2 views and last then when I watched 3 views

[@07whaleboy]

@@CodeByteCrafter I get it, you're the 3rd person to watch this video, not to comment.

[@CodeByteCrafter]

@@07whaleboy LOL

[@nishantchandra2082]

col

[@ivancomp_inside]

3rd comment

[@07whaleboy]

Yep! You're 3rd!

[@ivancomp_inside]

5th

[@07whaleboy]

Nope!

[@evanzevene33]

01:52 - RGB to BGR

[@MYCUNNYsob]

hey i did that as a kid at my grandma’s house!

[@JustJaidenism]

Well, now I know how to emulate analog TV.

[@World_of_OSes]

Component Video is analog.

[@JustJaidenism]

@@World_of_OSes I meant the way it looked. Oops.

[@JustJaidenism]

Well, now I know how to emulate analog TV.

[@V530-15ICR]

@KittyCat2470 actually 3 times