What Happens Inside a BLOWN UP Engine?

In Taryl's final installment of 2020's Halloween how-to series, we bring you "The Glob". Taryl and Elk Skins blow up a Krohler 25 hp engine then crack it open to show you what it looks like inside. What damage has been done and just what happens, when the engine lets loose?
Before and after the how-to, Junior discovers a glob inside a carbatrator. Soon, the glob grows into something no one was prepared for... but what does the glob want? Can Taryl and Jr take on... THE GLOB?!?
Find out here. And as always, There's Your Dinner!!
Subscribe Today! (Click the 'Subscribe' button on this channel!)
Be sure to 'Like' Taryl on Facebook!
/ tarylfixesall
And Follow him on Instagram! @tarylfixesall
/ tarylfixesall
Pick up YOUR Taryl Apparel Here! (Shipping Worldwide Daily)
www.TARYLFIXESALL.BIGCARTEL.com
Get Your Parts From www.ProPartsDirect.net and Tell 'em "Taryl Sent Me!"
Grass Rats Garage Theme Music Available!!
Pick up a physical copy on CD from the Taryl Online Store:
my.bigcartel.com/products/505...

[@fillslawncare]

I'll be honest, sometimes I'm just here for the new skits 👍

[@Songwriter376]

Agree. He should do just skits. Love them!

[@hank1556]

they're not skits. this is Taryl's real every day life

[@revohirst]

The whole thing is a skit. Fire it up x3!!

[@ra5tan365]

Haha.. I use to skip them I was up late one night. Watching the skit about unwanted junk yard parts adoptions. My wife was like what are you watching

[@Jchroni1]

8:52

[@court7803]

Teryl I almost die of laughter when you start paraphrasing what all the arm chair mechanics are saying 🤣😂

[@chainsawchips]

"Blow it up! Blow it up!! Blow it up!!!"

[@R.N.GPerformance]

lol

[@veb6814]

Are you sure the glob didn't come from "Uranus " ? Lol

[@hunter7476]

First the graphics are amazing g and the channel is awesome it just gets better every week thanks taryl

[@rwandersonut]

I totally understand why you would not want to re-build that engine, however, you would have a lot more spare parts to save another engine if you had not let it explode. (But it did make for a great video). Thanks!

[@Shootingstarcomics]

I blew up my Kohler this morning too! That happens when I try to eat a whole pizza for supper. I think the Kohler motors are made in the same factory as the terlets anyway.

[@jeffreyyeater1780]

Boy I hear ya.

[@dkeith45]

I saw a video a few years back, of someone who on purpose, blew up a good running Kohler Command single cylinder. Yeah, one of the good ones. They drained the oil then ran it till it threw its rod. Took a good 5 min or more if I remember right. I commented on their video that they had effed up, and ruined a great engine.

[@zrkn1]

A masterpiece , the special effects are second to none. Speilborg and G. Luscus had better watch out! The Kroler carnage was almost too gorry to bear. I smell an Acamady Award in the works. Thank You for my rockin dinner.

[@benb2451]

I Leeked Oil when I saw the carnage of the crawler engine!

[@ronster6656]

5:02 - Elmer Fudd would be proud. And the Pittsburgh Tools comment...gold, Jerry! GOOOLD!!

[@mkilptrick]

I watch many podcasts on how to fix things but this one is the most entertaining. Kudos to your production crew. All 1000 of them. Fire it up. Fire it up. Fire it up.

[@Pwaak]

"Ive seen plenty of buggers before, but never any that took off like that"...LOL!!! Great special effects, Great video! Thanks!

[@alansmith2693]

Skippy....My favorite character. Eyyyy eyy eyyyyy!!! I jus need a spark plug.

[@freetolook3727]

KZbin CC (Closed Captioning) identifies carbetrator as "karma traitor".

[@not2fast4u2c]

13:36 This is your Engine after a night of heavy Drinking and Drag Racing...

[@jamesadams2333]

Thank you for the awesome video! Can't wait to see more!

[@benjaminstockton3917]

Awesome guys appreciate it

[@gregddown72]

Appreciate all the time and effort in your videos, they are both educational and hilarious. Please keep them coming.

[@dkeith45]

Great video guys, cool special effects. It is amazing the damage that occurs when an engine throws a rod. I bought a very good condition Craftsman DYT this summer with a blown engine, a single cylinder 19 hp Intek. I opened the case and the camshaft was badly bent, but the decompression release was intact. The governor gear was completely intact. The rod was shattered into 30 pieces. I'll replace it with a good 17hp Kohler Command I have.

[@kylehale6060]

I have joy your videos I have and larned a lot about engine repairs.

[@jeffreyyeater1780]

Im spooked !! There could be one of those in my shop !

[@clifforddeschaine6346]

Love your vids !!!!

[@taylorkendrick4845]

I think its so nice all the work these people put in the intertainment

[@DK-vx1zc]

You guys are great... Your videos get better and better.. hollywood quality. Plus the technical features are great.. thanks for sharing

[@jonathanschomer6853]

you guys are brilliant!

[@jimscimonetti1457]

I enjoy ALL you guy’s videos - But this is now my very favorite “Taryl Fixes All” video. Good job guys!

[@Seansgarage711]

This was a great way to start my day!! Love your videos!!

[@MrDad-ok8qe]

These guys are incredibly entertaining.

[@jaryljackderriere1232]

The special effects are definitely getting better - keep it up! It's always fun blowing up an engine. I buy lawn tractors with rusted decks for $50 - $100 for the running engine.

[@michaelglynn2638]

That was just brilliant, what a team! Elk Skins is great. 👏

[@engineer2001]

Fire it up, fire it up. lol

[@davequinn4701]

Great autopsy loved it ...thank you Taryl % Co.

[@rltkktlr]

Thanks a lot for sharing that.

[@jonathenholmes1882]

This was one of the funniest videos I've watched in a very long time good job guys

[@RayBenson45]

Awesome taryl video

[@brucel.6078]

Impressive damage!!!! And cool special effects!!!! Kohler.... BAH!!!

[@ronsbeerreviewstools4361]

Avery good two part vide. The Glob was very good, and seeing what happens to a no oil engine, a very good post. cheers !

[@coffeeseven]

Gettin pretty high tech with the special effects.

[@falloutguy8878]

Loving skits he's well funny so are you? Keep the videos coming as you cheer me up? Keep safe dude

[@freetolook3727]

Little bit of JB Weld and she'll be back running just like new.

[@joeortiz3455]

Taryl fixes all! Fire it up fire it up!

[@docjohnpaul1]

"The carnage!" Hilarious. It did look like a murder scene.

[@alanthompson723]

That was excellent

[@tompuhalla7774]

I see you cleaned your shop rag up!!!Love that rag👍

[@engineer2001]

That glob looked like great stuff to me (lol). "Slip Dogg" cracked me up too.

[@davidpotter9462]

That's a real quality engine there, too

[@Jcruce7122]

Need more elskins..... lol he seems like a good feller i enjoy your guys videos slips, jr, taryl, elskins the hole gang..... thanks for the hard work and tips

[@samuelneil2691]

I love this channel. I always get a good laugh. You all deserve so many more views and subscribers. Keep the quality content coming though!

[@garysgarage3669]

Besides the being worth the money or the time. It made a great video! Thank you

[@antoniomarc7174]

Wow that engine blew up pretty good I would say. Awesome vlog 👍👍

[@straifus3742]

I always use to fear the worst with vehicles and such machinery. Then I learned how things worked. Now I love fixing things. Thank for the dinner!

[@CraigArndt]

12:04 LOL!!! Haha, I love when he does that.

[@markc9400]

Taryl, I hope you have health insurance for your employees. Got Elk Skinns, jogging over there, barely looks healthy enough to lift his next White Castle Slider. Keep up the good work. Let's see that Briggs go in the Hooskervarner!

[@mattyg941]

Hahahahaha!!!! Elk Skins is the worst! He looks terrible!

[@engineer2001]

@@mattyg941 He's my new favorite character, honestly. The "shut up!" Taryl gives Elk Skins reminds me of when he used to throw Slippers over the fence. I don't think he looks terrible at all - just needs to wash his hands. You can tell he's been working for real.

[@BarryLambright-ff1pz]

TARYL just whated some piston nuggets for his DINNER he don't have any .

[@rdaw33]

That was a dumb skit..........But I loved it!!!!!!!!!!!!!!!....It does hurt to blow up an engine, but I loved that too. That part that the space ship needed was exactly what I thought it needed!!!! Glad you had one on the shelf, I had to replace one just the other day!!!!!!!!!!!!!!!..........Good job!!!!!!!!!!!!!!!!!!!

[@brandonsatterlee7546]

I had the same Kroler on my Dixon zero turn that the drain plug came out of too. It went boom also!

[@thunderroad7289]

This guy is a legend lol

[@Wayoutthere]

Gotta love me some destructione videos!

[@jafinch78]

Neat seeing the inside of one of these. Have a new air compressor that I'm guessing will be better to upgrade to the 190 Intek and be a gas engine portable one. Thinking leave the electric 60 gallon one even though has the inferior compressor. Looks like either an electric actuator solenoid with the regulator switch installed already or the pressure release contraption with cable and a go kart clutch on the engine. Anyhow, that will get me going for the seized pulley removal treatment without heat first and then with heat post cherry red quenching with the ground down flatter point air hammer fun. Skip expensive 5HP electric motors if I can. Thanks for sharing!

[@RichieCat4223]

You should what happens when a 3500 Cat engine throws a rod. That's your dinner and dessert. Lol.

[@chevylandt.v]

I have never seen taryl work so fast before.

[@danielprivate7442]

RIP Skippy...ehh-ehh-ehh-ehhhhhhhhh

[@bruceferrero8178]

Elk Skins "fire it up, fire it up" Takes 3 steps back? Haha

[@ganeshnarayan5505]

I wish i had spare parts for space ship. Great video guys

[@grominwithrob1339]

Last Kohler I saw that threw a rod ended up with a custom inspection port!🤣

[@michaelbradford4444]

Great video Taryl ! Like to see what happens on a Honda or Briggs !

[@jackolson6479]

I love Taryl’s colonoscope camera

[@n8BDetroit]

Fire it up fire it up fire it up!

[@Wayoutthere]

Shadddaaaap

[@Elkskinsmowerjunkyard]

@@Wayoutthere lol :)

[@garrykrause2375]

WOWWWW TARYL....

[@chris1newbury]

You're lucky, In the UK our Globs only speak Arabic

[@SlyDellian]

Just wondering, in the UK, do they still use the expression “Arab on the corner?“ lol

[@mikeacree4838]

Its here too only more slowly. They want nothing to do with americans. Seperate society in every way.

[@hank1556]

thats WACIST

[@alansmith2693]

That would be really, really funny...if it wasn't so true.

[@SlyDellian]

@@alansmith2693 Who are you replying to?

[@CompetentSalesUSA]

Thank you.

[@moparnut6286]

Halloween carnage! Oh! Yeah.

[@stripersniper1531]

Man, can’t believe how bad that thing disintegrated like that.Thanks for the dinner ,T

[@johndeeretractorguy.9855]

I just rebuilt a 20 HP Briggs and Stratton intek that had the correct amount of oil in it but somehow it still managed to shatter the rod just enough to bend the cam that cracked the block. 300 in parts and still made 550 on the tractor.

[@johndeeretractorguy.9855]

Had a pump but I put back together and it was working fine. Could have failed? Not sure what did but would be interested in knowing .

[@scavengersgreen]

so cool it never even warmed up

[@bobk3840]

There is nothing wrong with taking your crank out and having it polished.

[@bengunn3698]

@Bob---Check out Hunter Biden on Gateway Pundit, he is getting his crank polished by a professional.

[@dfor50]

Or having a shiny head.

[@HighVoltageMadness]

Not gonna fix the knock.

[@dallintahere2127]

Your right

[@landonthompson5604]

Rotating hand grenades are my favorite things

[@andylong6589]

everyone has a friend like Elk Skins lol

[@DoyleFuckinHargraves]

Blow it up! Blow it up! Blow it up!

[@mustie1]

but it just needed $1000 in work, for a $200 engine,

[@gpweaver]

Those damned V-twins start at $1.7k (on a $2k mower), but yeah.

[@MitchellGWhitehead]

I enjoy your channel too dude

[@lookingbehind6335]

@Mick Mack Just squirt it full of lithium grease and call it a success.

[@oscarcarson6215]

sorry to be so off topic but does any of you know of a way to get back into an instagram account?? I was stupid lost my password. I appreciate any help you can offer me!

[@kadekeenan3129]

@Oscar Carson instablaster :)

[@georgelawrence2795]

Let’s see some more blowing up engines that’s awesome

[@astankov84]

Hi Taryl (or whatever your real name is 🤪) and company! I really enjoy your videos 👍👍. They are really funny but in the same time very informative about small engines. And now be ready for surprise - you have at least one subscriber in my country. Greetings from Bulgaria.

[@danielmcintyre9125]

Elk skins Elk skins fire it up!

[@15Muleskinner]

This is why I always check my oil before starting my mower and look it over. That plug had to have been leaking before it came all the way out.

[@15Muleskinner]

And glad to see Elk Skins getting in on the action. When is he getting a shirt?

[@norge696]

Sadly people don't do this. I do it every time before I start a small engine, even if I know the machine.

[@HighVoltageMadness]

Unfortunately I wasn't as careful as you. I kept forgetting to check the oil on my riding mower and used it extensively for lawn service. Over time it burned alot of oil and was running low but i never noticed. One day i started it up and drove a short distance. Everything sounded normal to me. Less than a minute later the engine threw a rod. Absolutely destroyed. Check you oil every time!

[@dougalbin1022]

You just got to love this channel. 😂🍺👍👏🇺🇸

[@Club-Thirty-Three]

Thanks for this one Taryl. I always wondered what actually happens and sounds like when the engine blows, and now I know. I understand that a lot of engines get mounted differently so they require various drain plugs. However, the company that utilizes the engine should lock the unused plugs. Pretty cool graphics in this video. Lastly, why did the Taryl Fixes All logo go from green to orange? Is this a seasonal thing? Another great Halloween season in Podunk!

[@tristanmcnabb2741]

Allsome 👌😃🌟

[@jensenwilliam5434]

Thank bill!!!

[@robmut1357]

Eric from South Main Auto calls the pieces “kibbles and bits.” 😁

[@markjohnson7508]

I'll adopt that part and give her the courage to be a great used part... I want one of those scopes..shweet

[@pulesjet]

Damn that thing came UNGLUED.

[@gordbaker896]

You can make a desirable Yard Art Lamp beginning with the crank bolted to an old Disc Brake rotor.

[@joshtheinflatableandtracto9785]

Wow

[@georgemartinezjr]

Never run out of Ideas

[@mcarroll598]

Make a video on putting on the used engine!

[@R.N.GPerformance]

that takes the saying " this aint the space shuttle we aint going to the moon" to a whole new level LOL LOL LOL

[@jdhogyellowhelmetproductio358]

cool

[@robertdavis6708]

The Courage engine by Kohler was the biggest mistake that company ever made. Plastic cam gears, top plate bolts vibe- rating lose causing oil leakage and finally blowing up. My mower salesman said they delivered a brand new one" Courage powered engine", years ago and it blew up before they returned to the shop. Thank God they fired the engineers on that build!

[@wesleyguseman1468]

Blow it up ,blow it up ,blow it up

[@roscoe454]

nice

[@jeremiahjorenby2275]

I ran my FD611v low on oil, and the upper main bearing lost pressure, got so hot it seized the engine and caught the upper crank seal on fire luckily the rods, crank, block and lower journal survived and I was able to press a new upper main bearing + the other usual rebuild stuff and it runs like a dream now, 80psi cold oil pressure and 30psi hot idle