#WoodworkingTrick #Woodworking DIY #ideas Woodworking ideas that use woodworking glue to drive wood cores, but use the principle of concrete anchors to keep them from falling out
Пікірлер: 635
@Georgy-fg3bg3 жыл бұрын
It's a pleasure to see someone have a head to use it. The best ideas are the simplest. Thanks a lot.
@BStarCrafts3 жыл бұрын
Thank you for good comments. I wish you good luck 🍀🍀🍀🍀🍀
@____MC____3 жыл бұрын
It would be cool to see a pull force test on different dowel techniques.
@BStarCrafts3 жыл бұрын
Thank you so much for the good comment. 👍😀
@pawewojtas883 жыл бұрын
Exactly what I thought seeing the title.
@adifferentangle70643 жыл бұрын
That method - or at least the traditional suicide mortise and tenon joint it is based on - the point of failure is the wood. So the joint is as strong as the wood itself. It's nice to see modern takes on old methods, but you really want to think twice or thrice before applying this one. Having a permanent joint means zero repairability. It also can potentially be a point of failure. Most wood joints are designed to allow for seasonal expansion/contraction. Do this to every single joint on your project and there is a chance the expansion could be restricted to a point the the wood starts splitting... particularly if softer/fresher timbers are used.
@ll85553 жыл бұрын
이분 영상에 달리는 수많은 댓글을 보면 이러한 목공 기술같은경우는 외국에서 더 알아주는것 같고 기술 알면 세상 어디가서도 먹고살수 있을것 같다는 생각이 드네요 ㅋㅋ
@BStarCrafts3 жыл бұрын
감사합니다. 외국은 우리나라처럼 출장 서비스가 좋지 않다보니 직접 고치고 만들고 하는게 다반사라서 더욱 그런 거 같습니다. 암튼 노력한만큼의 기술이 인정 받으면 더 좋은 세상이란 건 지극히 맞습니다. 좋은 밤 되세요~😄😄😄
@puntley60973 жыл бұрын
You've brought together people from all over the world in the comment section! Very cool! Wonderful video! Good luck with your channel!
@BStarCrafts3 жыл бұрын
Thank you so much for supporting me. 👍👍👍 Always be lucky 🍀🍀🍀❤️❤️❤️
@johndudash25793 жыл бұрын
Thank you, you could find yourself in a situation with no glue and this method could be important. Curious if old oriental architecture had lots of this, because you don’t see nails many times.
@BStarCrafts3 жыл бұрын
Thank you for good comments 👍👍👍 Have a nice day 😊😊🙏🙏
@michaelballinger64193 жыл бұрын
This technique is used in woodworking with mortice and tenons, you taper the mortice slightly to allow the tenon to spread. The advantage to using the wedge is control over the direction of force on the mortice piece so it won't split. With the screw because it's round it puts force out in all directions which is why the wood split. Once a mortice and tenon is put together you'll never get it apart again.
@BStarCrafts3 жыл бұрын
Very good description 👍
@vvt.t73 жыл бұрын
Thank you, you are creative, a good greeting to you from the Arab world ❤️🌹
@BStarCrafts3 жыл бұрын
شكرا لك. أتمنى أن يكون العرب دائما مليئين بالحظ 🍀💚😄والحب
@mckeindoctor32423 жыл бұрын
와....천재적이다... 이렇게 유튜브로 또 지식이 하나 늘었습니다
@BStarCrafts3 жыл бұрын
앗 과찬... 너무 감사드리고 멋진 하루되세요~👍😊
@Silverlining11113 жыл бұрын
Helpful no bs,Thankyou so much👍
@BStarCrafts3 жыл бұрын
Thank you 👍👍😄 Have a nice day 🍀🍀🍀
@johannc71833 жыл бұрын
Vidéo intéressante !!! Je ne suis pas sûr mais les chevilles bois ne seraient t'elles pas faites comme les "lamello" ? Du bois compressé qui regonfle avec l'humidité de la colle à bois ??
@BStarCrafts3 жыл бұрын
Thalnk you 👍
@caroleast96363 жыл бұрын
Same principle as the wedge in fitting a hammer head. With dowels, I would put the glue in the hole first. If you put it around the side of the dowel, it will always get pushed back out. With glue in first, only the excess gets pushed out.
@BStarCrafts3 жыл бұрын
Yes, that's right. I actually use woodworking glue, but I didn't do it to highlight the principle in the video. Thank you for good writing 🍀👍😄
@hotchihuahua15463 жыл бұрын
As long as you are going against the grain your ok , go with the gain and you will compromise and split the wood you are trying to repair , nice tip , music & video !
@BStarCrafts3 жыл бұрын
Thanks for the great comment. 👍👍👍
@윤현진-c5s3 жыл бұрын
지금이라도 목공본드 마르길 기다리는것보다 훨씬 효율적인거 같아요~ 아이디어가 늘 Good 입니다 ^^
@BStarCrafts3 жыл бұрын
고마웡~~~ 오늘 하루도 대박 행진~ 고고!! 👍👍
@Kynosys3 жыл бұрын
안녕하세요 카이노시스입니다. 이런 방법이 있었다니 놀랍네요! 좋은정보 공유해 주셔서 감사합니다!
@BStarCrafts3 жыл бұрын
감사합니다. 처음엔 못으로 했다가 포기할려다 나무 조각으로 쪼개니깐 되네요. 실용적이진 않고 하나 방법 정도...😊😊😊 멋진 하루되새요~^^
@selomuric96933 жыл бұрын
hello I've been watching you from Istanbul Turkey so successful, I think you are very varied and interesting career SIZD I see examples of mastery learning and I congratulate
@dedos-pima3 жыл бұрын
Very nice and interesting video. Please tell me what the name or brand of drill press.
@BStarCrafts3 жыл бұрын
Thank you for watching and comments. 👍👍 drill press is Bocsh (PBD40). Have a nice day 🍀🍀😊
@matiasrodriguez19553 жыл бұрын
Que bueno es aprender algo nuevo
@BStarCrafts3 жыл бұрын
Gracias. Siempre ten suerte 🍀🍀🍀👍👍😊
@Maghmaniac3 жыл бұрын
Thanks for explain without needing words. See was a best and easy way tô understand
@DowellPiano3 жыл бұрын
Have you ever seen Japanese blind dovetails? They’re a similar idea, applied to mortise and tenon joints. Many piano lyres use wedged round tenons, but the other side is exposed, unlike these blind holes.
@BStarCrafts3 жыл бұрын
Thank you for good information. 👍 Have a nice day
@flowerpt3 жыл бұрын
Every real scientist appreciates a negative result. Good experiment!
@danthelambboy3 жыл бұрын
How about screwing a tiny countersink screw into the tip in a pre drilled hole
@BStarCrafts2 жыл бұрын
It is a countersink drill bit, which is a brand called EZEN KOREA, which is currently being sold in Korea, Japan, and the United States, and it is said to be sold in Europe. It comes out when you search by Ezen drill bit. Thank you www.amazon.com/gp/product/B09HZG8NNC/ref=cx_skuctr_share?smid=A35AYGA66097BU
@НатальяКоновалова-ш5ф3 жыл бұрын
Молодец! Хороший ролик и для взрослых и для детей! Благодарю! Сыну покажу может запомнит и будет знать, как надо!👍🤗🍯
@BStarCrafts3 жыл бұрын
Благодарю ... чудесная семья Всегда будьте счастливы. Спасибо 👍👍👍
@АркадийОградовский3 жыл бұрын
Я так клином ,генеральше ёлку на Подставку приделал ,ёлку как топорик расщепил инадел Подставку и клин забил .оч крепко было .а генеральша дрянь .
@053RUS2 жыл бұрын
@@АркадийОградовский какой гугл переводчик в помощь тебе? )) кто такая "генеральша"? и почему она "дрянь"? :Р
@АркадийОградовский2 жыл бұрын
@@053RUSчего ты добрался ? А
@Qui-93 жыл бұрын
I like this idea. Also if you like, you can poke a small and shallow hole in the end of the dowel, and use a small carpet-nail or finishing-nail or toothpick instead of a wedge 👍
@BStarCrafts3 жыл бұрын
Thanks for the advice. 😊😊😊 Have a wonderful day and always have good luck~ 🍀🍀🍀👍👍👍
@purplegravy3 жыл бұрын
Dowels don’t really need to be hard to extract, do they? I thought the purpose of them was to contain the lateral load between two pieces of wood. I do like your solution of adding a wedge, but why?
@noyb723 жыл бұрын
This is using a dowel as a faster. Plenty of applications, stool legs, floating tenon, you can head the dowel and use it as a nail. Centuries old technique.
@vanessagratta95533 жыл бұрын
@James Stewart di t
@kibukun3 жыл бұрын
Why not?
@noyb723 жыл бұрын
@@kibukun There are actually times that this isn't a great idea. Wood species brittleness and grain orientation need to be considered. Where this is appropriate, it is quite strong. There really is no "need" for glue, but it makes things much faster and easier.
@ATLTraveler3 жыл бұрын
Just drill a smaller hole or a bigger pin and hammer it in... literally the same thing but the entire pin is secured not just the bottom...
@산신령3 жыл бұрын
오래전부터 사용하던 지옥장부라고 하는 밥법이네요. 실제로 옛날 창호지 바르는 문짝에 보면 흔히 볼 수 있습니다.
@BStarCrafts3 жыл бұрын
네 지옥장부라고 들었습니다. 창호지 문짝에도 저런 방법으로 체결을 해왔군요 감사합니다 ☺️
@Freetalkfm3 жыл бұрын
Great idea no glue . This method would be very good for future repairs no glue residue or break out to clean up just pull and replace 🖒
@BStarCrafts3 жыл бұрын
Thanks for the good comment. Have a nice day
@MrGimyou3 жыл бұрын
오랜만에 놀러왔는데 조회수 대박이네요!!!! 꾸준한 노력으로 결국 대성하셨네요!! 축하드립니다~^^
@BStarCrafts3 жыл бұрын
감사합니다. 유캔메이크님이 초반에 응원해 주신 덕분입니다. 얼른 앞질러 가새요. 🍀👍😄🤜🤛
@한희혁-m2e3 жыл бұрын
어디서 이런아이디어가 나오는지 부럽네요 앞으로도 더좋은 아이디어 부탁할께요
@BStarCrafts3 жыл бұрын
시청해주셔서 감사합니다~~😀 멋진 하루되세요~
@woodwood13 жыл бұрын
좋은 아이템입니다.... 창의력이 대단하십니다...부럽습니다.
@BStarCrafts3 жыл бұрын
별말씀을요. 전 오래 전부터 우드우드님 팬입니다. 제가 알지 못하는 고급 정보들을 이해하기 쉽게 풀어주셔서 항상 재미있게 보고 있습니다. 야외에서 주로 일하시는 것 같은데 감기 조심하세요. 😊
@woodwood13 жыл бұрын
@@BStarCrafts 별말씀을요... 앞으로 크게 성장하는 채널이 분명히 되실겁니다. 제 촉이 그렇습니다..... 제가 검은별 공작소님의 채널을 "추천채널"로 함께 공유해도 될까요?
@BStarCrafts3 жыл бұрын
영광입니다. 과찬 너무 감사드리고 제 텅빈 머리를 채워줄 영상 기다리고 있겠습니다 ^^
@woodwood13 жыл бұрын
@@BStarCrafts ^^;;....... 검은별님의 피스자국 가리는 영상은 정말....... 대박이었습니다....... 이번 지옥장부와 앙카의 비교설명도 저에겐... 큰... 느낌을 줬습니다..... 감사합니다.
@BStarCrafts3 жыл бұрын
우드우드님의 많은 건축의 원리 설명에 비하면 정말 부끄럽습니다. 어려울 수도 있는 내용을 쉽게 풀이하시는 걸 보면서감명 많이 받았고 진짜 많이 배우고 있습니다 ^^
@dmitrys56413 жыл бұрын
Отличный способ. Он применяется в том случае, когда шкант не достаточно плотно входит в отверстие. Меня этому научил мастер, ещё в далёком 1984-м:)
@BStarCrafts3 жыл бұрын
Спасибо, спокойной ночи 😀
@053RUS2 жыл бұрын
в 84?! меня тогда ещё не было ))
@derecwilsom45463 жыл бұрын
i remember a thing called a fox tennon is mortice and tennon that uses wedges to spread, this looks something similar
@BStarCrafts3 жыл бұрын
You're right... Fox tenon's application... A few days ago I uploaded another application video of Fox tenon. Thanks for the good comment. Wish you always have luck 🍀🍀👍👍
@dedos-pima3 жыл бұрын
Thank you for the information of your drill press!
@BStarCrafts3 жыл бұрын
Your welcome 😊 Thank you and Wish you good luck 🍀🍀👍👍
@ЮраМит3 жыл бұрын
Шкант должен заходить плотно без клея.
@BStarCrafts3 жыл бұрын
Спасибо за ваш ответ
@alexeyandreev94933 жыл бұрын
Для свежего отверстия под шкант, конечно, но при ремонте мебели, когда старое отверстие разболтано, отличный метод! Можно использовать стандартный шкант, а не делать вручную чуть больший или рассверливать под больший стандартный диаметр шканта.
@자유-l8i3 жыл бұрын
굿입니다. 아주 좋아요!
@BStarCrafts3 жыл бұрын
감사 곱하기 억만배 감사합니다 😊 좋은 밤 되세요~👍
@ОлегШолохов-р7к3 жыл бұрын
Тебе тоже привет.
@PujiAsmokulo3 жыл бұрын
Very useful information, thanks for sharing
@BStarCrafts3 жыл бұрын
Thank you 😊 I wish you good luck 🍀🍀🍀
@ramilminnegaliev15163 жыл бұрын
5,4 млн просмотров. Просто мужик стучит киянкой по деревяшкам
@BStarCrafts3 жыл бұрын
😊 Спасибо
@prokadj58743 жыл бұрын
Меня скорее удивляет факт того, что он отвечает и ставит сердца на английские, русские и китайские комменты В русском случае вроде использует гугл переводчик, но всё же
@BStarCrafts3 жыл бұрын
Это мои интересы, мнения, моя небольшая вежливость и благодарность за просмотр. 😊Спасибо, 👍 хорошего дня
@prokadj58743 жыл бұрын
@@BStarCrafts вам тоже хорошего дня! Не часто в наше время увидишь таких добрых людей как вы
@TheEmpire22223 жыл бұрын
Да, но как он стучит..... 17-й раз смотрю ))))
@weonjiklee38113 жыл бұрын
신박한 아이디어 💡 최고 👍
@BStarCrafts3 жыл бұрын
감사 감사합니다~~~ 👍👍 멋진 하루되도록 🙏🙏🙏😊😊
@wildguardian3 жыл бұрын
if would be interesting if this was possible to both sides, so the rod could be used to join 2 parts together without glue, but it will splinter.. glue at least in one end I suppouse.
@BStarCrafts3 жыл бұрын
Good opinion... The video does not use glue to show the principle. 🍀😄
@cfusername3 жыл бұрын
I think it's too complicated for practical use, but still interesting to experiment with. The 10 mm hole seemed too big or the dowels were too thin. Usually you should have a friction fit that is so tight, that you have difficulties getting it out again even without glue.
@BStarCrafts3 жыл бұрын
That's right, I think it's not practical to actually use. The reason for the wide hole was deliberately to use a wide hole to make it easier for viewers to understand. Thank you for your great comments and have a great day 👍👍👍
@aycfes3 жыл бұрын
may not be practical for most uses, but could be very useful for some more traditional jointery and furniture making. i belive the portuguese used something similar to make church doors.
@BStarCrafts3 жыл бұрын
Yes, that's right. In Europe, such a method is called FOX WEDGED TENNON, and in traditional Korean architecture, it is called HELL TENNON because it cannot be taken out once inserted. Thanks for the good comment. Have a nice day 👍😊
Возьму на заметку... Хорошая идея,может пригодится.👍🤝
@BStarCrafts3 жыл бұрын
Спасибо за хороший комментарий. Хорошего дня 👍😊
@วิระพิทักษ์ถิร3 жыл бұрын
Very Good Practice.
@BStarCrafts3 жыл бұрын
Thank you 😊 have a nice day 👍
@waldrand44743 жыл бұрын
Hola, el video esta muy bueno
@BStarCrafts3 жыл бұрын
Gracias. Siempre se feliz 👍👍😄😄
@indoorsandout30223 жыл бұрын
This works just like the Jigoku Kusabi joint used in Japan. The major difference is that the hole for jigoku kusabi is a different shape, larger inside than the mouth of the hole, so when the peg splits it is locked in place and cannot be removed.
@BStarCrafts3 жыл бұрын
Kusabi joint... thanks for your good information. Such a method is called Giok Gangbu (Hell TENON) in Korea and Fox Weged Tenon in the West. Wish you good luck 🍀🍀🍀😊😊😊
@indoorsandout30223 жыл бұрын
@@BStarCrafts I think Kusabi part just means Dovetail. Jigoku means hell. So it's Hell's Dovetail. I read about it in a book
@marianob82443 жыл бұрын
Muy buena idea , también se podría usar un clavo en lugar de la cuña ganando tiempo al no tener que fabricar la cuña
@BStarCrafts3 жыл бұрын
Gracias por el buen comentario. Lo intenté con un clavo, pero el clavo no estaba partiendo la madera, pero se rompió y se rindió. Pero si cambia la forma, las uñas estarán mucho más cómodas. No sé si la traducción salió bien. Que tengas un buen día
@marianob82443 жыл бұрын
Se entendió ok! Gracias
@MrJdorrington3 жыл бұрын
Great experiment. Thanks
@BStarCrafts3 жыл бұрын
Thank you for watching 👍👍👍 Have a nice day 😊😊
@굿잡TVGoodjobTV3 жыл бұрын
오호 대박 참신한데용 하나 배웠어용 ㅅ.ㅅ
@BStarCrafts3 жыл бұрын
감사합니다. 한글 댓글이 2연속 올라와서 저 역시 신기하고 반갑습니다. 👍👍👍😊
@rawgreed6663 жыл бұрын
Awesome idea I can't wait to try it👍👍👍
@BStarCrafts3 жыл бұрын
Thank you. You'll be successful 👍👍👍
@adelabdelrahman88473 жыл бұрын
عمل جيد وافكار رائعه انا من دمياط بلد الاثاث
@BStarCrafts3 жыл бұрын
لقد ولدت في مكان رائع 👍 شكرا لك 멋진 곳에서 태어났군요 👍 감사합니다
@반환점을돌아서3 жыл бұрын
좋아요! 좋아! 꼭 필요한 아이디어 반드시 이 방법이 필요한 상황이 올듯☺
@BStarCrafts3 жыл бұрын
앗 오셨군요... 항상 잘 봐주셔서 너무 너무 감사드립니다 👍👍👍👍 곱하기 억만배 😊
@scarpettascarpettascarpett36633 жыл бұрын
Creo que funcionaria con cuñas de madera de alta densidad y los clavos internos en forma de cono solo así creo que funcionaria, también a la tabla base con un punzón media caña sería bueno hacerle algo de espacio de diferencia almenos de un milímetro o dos en el fondo de la base para permitir un poco la expansión del chazo de madera
@BStarCrafts3 жыл бұрын
Gracias por los buenos comentarios y consejos. 😊😊👍👍
@timontherocks75213 жыл бұрын
In the Alps tradition used ROUND holes and SQUARED wooden nails.
@BStarCrafts3 жыл бұрын
Thanks for good information. 👍👍 Have a nice day
@estergrant67133 жыл бұрын
well id say one thing is those dowels are a bit undersized for those holes, they ought to have a friction fit which will help a lot
@BStarCrafts3 жыл бұрын
Yes. Thanks for the good comment. The reason the hole is wide is that it is intentionally used to make the principle easier to understand. Thanks for the good comments and have a nice day
@deniswood3573 жыл бұрын
Не плохо. С советских времён шкант- это лучший дюбель.
@BStarCrafts3 жыл бұрын
Спасибо за ваш ответ
@h2022korea3 жыл бұрын
영상 잘봤습니다! 이쑤시개 대신에 철로된 압정을 쓰면 어떨까 생각해봤네요 ㅎㅎ
@BStarCrafts3 жыл бұрын
아... 저도 처음에는 못으로 해봤는데 갈라지질 않고 그냥 뚫고 들어가서 둘레가 넓어지질 않아서 실패했어요. 적당히 쪼개지는 게 포인트인 것 같아요. 조언 너무 감사드리고 멋진 하루되세요~~^^ 👍
@marlonjohnfreyburger62423 жыл бұрын
Génial 👍🏼
@BStarCrafts3 жыл бұрын
🙋♂️👍🤜🤛😄
@claudiodarioramirez993 жыл бұрын
Excelente!!! Saludos desde la República Argentina.
@BStarCrafts3 жыл бұрын
Gracias. ¿Puedo amarte a ti y a Argentina? 👍👍
@claudiodarioramirez993 жыл бұрын
@@BStarCrafts ¡Muchas gracias 😊!
@BStarCrafts3 жыл бұрын
👍😊
@destroyer22033873 жыл бұрын
Genius thx! You need try couple 2 wood pease with one cilinder wich have 2 side hole
@BStarCrafts3 жыл бұрын
That's a good idea 👍 Have a nice day
@βασιληςκαρβουνης-υ1ο3 жыл бұрын
Καλημέρα Πολύ ωραίο βίντεο
@-grandsonofcarpenter59873 жыл бұрын
참으로 굿아이디어네여^^ 👍 👍 👍
@BStarCrafts3 жыл бұрын
감사합니다 목손님 올해는 목손님 채널 대박나실겁니다~👍👍👍
@walterromano80223 жыл бұрын
Muy buena idea!! Gracias
@orangechannel75343 жыл бұрын
thanks for the awesome tricks 👍👍👍
@BStarCrafts3 жыл бұрын
Thank you so much... A good heart, good eyes, and thoughts will make you more beautiful and smart. Thank you 😊
@SirWulfrick3 жыл бұрын
But the edge spreading effect is only occurring at the furthest end when pushing it in. It doesn't hold up to any force pulling it out at which time the edge would be inclined to shrink as you pull. The only reason it's creating holding force while in the hole is because you're expanding it to fill the hole you initially drilled too big. Lol. Drilling holes small enough that you need to mallet the dowel into (plus glue) will give you the correct hold and without splintering and compromising the dowel. Those broken dowels might appear to be holding a straight pull but now try bending the spline - you've broken your dowels into toothpicks.
@BStarCrafts3 жыл бұрын
Thanks for the good comment. Have a nice day
@ihabtayeh40703 жыл бұрын
can anyone please explain what is the idea from the video ? , I am new to woodworking so I didn't get it. thanks in advance
@BStarCrafts3 жыл бұрын
Hi. This is a video using a traditional wood joint method called Fox wedge joint with drill and doewl There is another application video on my channel. Have a nice day. 🍀🍀🍀🍀
@ihabtayeh40703 жыл бұрын
@@BStarCrafts Oh cool, Thanks for replying , I'll watch the other video too ,keep up the good work
@jabc39793 жыл бұрын
Very interesting for the people without imagine....
@BStarCrafts3 жыл бұрын
Thank you for good commens 👍 Have a nice day 😊😊😊
@zeroequator3 жыл бұрын
다음에는 한번 나무가 물에 부푸는걸 이용해보는것도 괜찮을듯
@BStarCrafts3 жыл бұрын
아... 그런 실험도 아주 흥미롭네요. 어느 정도 부풀고... 얼마 있다가 수축이 되는지.... 해볼만합니다 👍👍😊
@stopthelawsuits3 жыл бұрын
Never seen someone split the dowels like that, would you do it for both sides or just the one?
@BStarCrafts3 жыл бұрын
Thanks for watching. Both are possible and can be successful without difficulty. Have a nice day 🍀🍀😊😊👍👍
@chuckfarley5673 жыл бұрын
Great video...!!
@BStarCrafts3 жыл бұрын
Thanks for the good comment. Have a nice day
@chuckfarley5673 жыл бұрын
@@BStarCrafts Your welcome...keep up the good work !!
@jma51773 жыл бұрын
Excelente.
@BStarCrafts3 жыл бұрын
Thank you very much 😊😊 Always good luck 🍀🍀
@valdevinoromualdo96083 жыл бұрын
Obrigado!!! Vivendo e aprendendo U M A E X E L E N T E AÚLA
@BStarCrafts3 жыл бұрын
Obrigado também. Tenha um bom dia
@dougras81733 жыл бұрын
AULA NÃO TEM ACENTO
@mhctools3 жыл бұрын
Muy bueno. En el caso de la cola de carpintero trabaja por adhesión. Ahora con las cunas no se traba . No estoy seguro pero la cuña tendría que ser en forma de x quizás para que el taco de madera expanda y apriete en 4 puntos
@BStarCrafts3 жыл бұрын
Gracias por ver. Gracias por los buenos comentarios.
@헤헤-n3e3 жыл бұрын
1.5배속하니까 보기 딱 편하네용!
@BStarCrafts3 жыл бұрын
아하 그래요? 다음 영상 만들 때 참고하겠습니다 😊
@헤헤-n3e3 жыл бұрын
@@BStarCrafts 아녜요 개인적 의견입니다! 느긋하게 보는게 좋으신 분들도 많을텐데요! 배속이 편한사람이 소수라면 소수가 배속기능을 이용하면 되는걸요!
@BStarCrafts3 жыл бұрын
👌👍😊... 멋진 하루되세요 ^^
@AquamanIV3 жыл бұрын
I wonder if the principle would work for jointry
@BStarCrafts3 жыл бұрын
This is the principle used to fix the iron head of a hammer or ax on a wooden stick. The principle of making a hole tight as the tree opens 😊
@muzafferturan61083 жыл бұрын
Teşekkürler
@BStarCrafts3 жыл бұрын
Teşekkür ederim. Iyi günler
@deniswood3573 жыл бұрын
Ну в целом прикольно. Я изготавливаю мебель без использования металлических крепежей. Всё на столярные соединения. Встал вопрос как ручку к дверце прикрепить. Просто паз и туда её было не комфортно. Просто на клею - не наш метод. Тоже тогда догадался до внутреннего расклина. Лучше любого шурупа держит. Хз какой смысл так на счёт шканта заморачиваться. Он ведь позиционный в первую очередь. Площадь склейки кромки будет много сильнее шканта.. Ну и чтобы не было трещин нужно отверстие просверлить в шканте. Тогда трещина на дырке и закончится.
@BStarCrafts3 жыл бұрын
Спасибо за хороший комментарий
@killerb93963 жыл бұрын
Amazing idea! 0:51 Name of music, please. Brazil here! 🇧🇷
@BStarCrafts3 жыл бұрын
Thank you so much for watching. It's a song called Christmas 8 in an editing app called Vllo. So maybe it's hard to find. Always be with good luck and love.🍀🍀❤️❤️
@Alexaquas3 жыл бұрын
Доброго времени! А на какую камеру вы снимаете? Классное видеО)))
@BStarCrafts3 жыл бұрын
Снимаю на iPhone X. Спасибо за просмотр 😊 Спокойной ночи 👍
@Alexaquas3 жыл бұрын
@@BStarCrafts Благодарю! Удачи вам) Привет из Украины)
@BStarCrafts3 жыл бұрын
Спасибо 🇺🇦
@georg49083 жыл бұрын
Лучший самый бережный результат даст, сверление отверстия под саморез 2-2,2 мм и затем ввернуть саморез, можно смазать мылом или густой смазкой типа Циатим.
@BStarCrafts3 жыл бұрын
Спасибо за хорошую информацию
@victorcueto26873 жыл бұрын
No es mas facil hacer el agujero mas pequeño para que el tarugo entre a presion?
@lsneiva3 жыл бұрын
Excelente idéia! : )
@BStarCrafts3 жыл бұрын
😊🍀🍀🍀🍀🍀
@njd11cornell3 жыл бұрын
The festool domino is a game changer...
@BStarCrafts3 жыл бұрын
Thank you for the compliment. 😊😊😊 Have a nice day👍
@hitoriteaki3 жыл бұрын
I am from a little village, and as long as I know we used wood as an anchor for concrete or silicate brick walls. And recently, I did the same with foam brick wall. What we do: drill a hole, put there a stick, and drive a screw in that wood. Holds really hard.
@BStarCrafts3 жыл бұрын
If you imagine it, it would be a very nice village. Even if it's hard, I wish you happiness with great work 👍
@komentattor3 жыл бұрын
before plastic coats, it was common used wood for driving screws into concrete/stone. In Poland I find it in old houses, but it's still very useful if you know this trick
@lechking9413 жыл бұрын
@@komentattor good for antiquity house repairs. Than also you can stright use squared pegs to rouned close sized holes. As I I think some old houses made by the first settlers used that methoid. For the wood pegs.
@Country_Shark3 жыл бұрын
도끼나 망치 같은 공구들 손잡이랑 머리 연결하는거랑 비슷하네요
@BStarCrafts3 жыл бұрын
네~ 같은 원리라 보시면 됩니다. 다른 것은 도끼 자루와는 달리 보이지 않은 폐쇄된 공간에서 빠지지 않게 하는 점입니다. 시청해 주셔서 감사합니다~🍀😄👍👌
@StefanovichAl_dr3 жыл бұрын
Век живи, век учись).Мастер!
@BStarCrafts3 жыл бұрын
🍀🍀🍀😊
@Stowercom3 жыл бұрын
Не знаю, каким образом это видео появилось у меня в рекомендациях, но мне оно понравилось 👍
@Fahrenheit-so7ue3 жыл бұрын
Вот и я не знаю, но интересно блин)))
@charlesissleepy3 жыл бұрын
before commercially available sleeve anchors or tapcon screws were available, drilling for dowels and nailing into them was standard procedure for fastening to masonry or cement. I don't know if anyone deliberately wedged the dowels this way, but considering how axes are hung i wouldn't be surprised
@BStarCrafts3 жыл бұрын
Oh, I see. Thank you for good information
@wendyscrafthouse53043 жыл бұрын
재미있는 실험을 많이 하시네요. 나뭇가지 연결시 구멍이 미세하게 클때 쓰면 될것 같기도하고요... :)
@BStarCrafts3 жыл бұрын
네~ 궁금한 건 해보는 성격이라서요. 😊 예리하신 거 같아요... 👍 보통은 구멍을 좁히던지 목다보를 좀 더 큰 거 사용하면 낫지 않냐고 하는데... 웬디공방님은 다르네요. 👍👍👍
@wendyscrafthouse53043 жыл бұрын
@@BStarCrafts 네추럴한것들을 보통 쓰다보니..완벽한 구멍을 찾기가 힘들더라구요. 오히려 감사합니다. 좋은팁주셔서:)
@olidenmedel39683 жыл бұрын
Excelente vídeo felicitaciones Saludos y éxitos para tu canal
@BStarCrafts3 жыл бұрын
Muchas gracias. Ven y que tengas un buen dia
@olidenmedel39683 жыл бұрын
@@BStarCrafts ¡muchas gracias! Igualmente
@sebastienh11003 жыл бұрын
Not sure about that. You have to split the wooden anchor to do it, which makes it more fragile. With glue you should not need this complicated way I think
@BStarCrafts3 жыл бұрын
More fragile.... good idea! Thanks for advice 👍
@goodstormsgames97443 жыл бұрын
The dowel with wedge is in alot of older quality furniture. Bonds well without the need for glue and lasts for ever potentially. Well until the rung breaks.
@BStarCrafts3 жыл бұрын
Thank you for good comments. 👍 I think so. Have a good day 🍀🍀
@Jeremy-km4dj3 жыл бұрын
like what you are doing. going to try it out
@BStarCrafts3 жыл бұрын
Thank you 😊 Have a nice day
@HaiNguyen-ch3ee3 жыл бұрын
Hàng chổi than hay k chổi than a. Mà hàng chổi than giá nhiêu. Và k chổi than giá nhiêu ah
@-rus53573 жыл бұрын
замечательно!!! 👍👍👍👨🔧😉
@BStarCrafts3 жыл бұрын
Вы даже лучше. Хорошего дня
@CanalInformativointeresante3 жыл бұрын
Saludos de ECUADOR
@BStarCrafts3 жыл бұрын
Gracias. 🇪🇨 ❤️🍀 Siempre ten suerte
@hernangallardo52773 жыл бұрын
Me acabo de suscribir, gracias
@BStarCrafts3 жыл бұрын
Gracias. artículo
@abadaaelhoseny21182 жыл бұрын
Good job, good job.
@BStarCrafts2 жыл бұрын
Thank you 👍👍👍👍😊 🍀
@BludDK3 жыл бұрын
Отличная идея! Благодарю!
@BStarCrafts3 жыл бұрын
Спасибо. Всегда будь удачливым 🍀🍀🍀🍀
@김동수-w9r9g3 жыл бұрын
드릴을 좀 작은걸 쓰면 훨씬 더 좋지 않을까요?
@BStarCrafts3 жыл бұрын
네 그럼 훨씬 더 조여질거예요. 영상에서는 조이는 장면을 보여주기 위해서 일부러 헐렁헐렁하게 했습니다. 댓글 감사드리고 좋은 하루되세요~^^ 👍