What Happens When You Plug In a Cordless High Torque? Metabo HPT WR36DB

Our lifetime of TOOL RANKINGS torquetestchannel.etsy.com
Tool: amzn.to/3TITHRM 18/36V 4ah battery: amzn.to/2UcokVC AC/DC adapter: amzn.to/3lPQS2C Check out our T-shirt Shop: bit.ly/3z98ryF The Metabo HPT WR36DBQ4 is one of the last high torque's from retail stores we have not tested, so today we remedy that by testing it with the 372121M 4ah battery which is really an 8ah in sheep's clothing as well as the 372121M AC wall adapter to see if either of them can take on the Makita XWT08Z or Milwaukee 2767-20.
~We earn from qualifying purchases when using the affiliate links here~

[@PhillyFixed]

Now we just need a dual fuel air/electric impact wrench...

[@TorqueTestChannel]

Thanks for the 36V 4ah batt Philly! Oh and check out the Mac Impact episode, air and battery stuff going on the same tool!

[@flhusa1]

No we need 12 gauge shotgun shell chamber for instant boost in forward and reverse . Like on the flight of the Phoenix where Jimmy Stewart used them to prime and start the engine .

[@flhusa1]

Actually we need a 10 second burst of boosted voltage. Maybe another 10 volts kind of like push to pass in racing .

[@tammyshellikoff3482]

That de strong impact wrench

[@aaronwhite4946]

I made this exact statement a few months ago on this channel! Glad to see it finally on here as it is a plug in hybrid cordless

[@z28z34man]

Thanks for this I always knew my Metabo could go toe to toe with the Milwaukee impacts I have handled. It is also nice to know that Metabo was telling the truth about the corded supply having slightly less power.

[@CATA20034]

they are very conservative...all my tools are metabo :))). Love their encapsulated BLDC motors, no dust inside.

[@EF-69]

Indeed, I've been a fan for a long time. I'm glad to see them tested and do well. They may not always be the best and do/have had some issues, don't offer as wide a range of tools; but they're always a good value, usually a pleasure to use, and perform among the best, cordless drills, miter saws, you name it. They work as expected. The 36 volt multivolt system is great for those of us with 18 volt models. Pop on the 36V battery and get 18 at twice the current.

[@DGALVIN45]

HPT 💯🔥

[@bradleycooper5436]

I wonder how it would be with 240 volt plug

[@SnootchieBootchies27]

​@@bradleycooper5436the same. It's a 36v motor. When you plug it into the wall, the adapter changes 120 or 240 into 32. You then end up with 32. Did I mention that it's a 36v motor?

[@alminhelex]

Honestly I wish tool manufacturers would release wall adapters for their products. But they won't do that because that would lose them tons of money in battery sales.

[@OmegaGamingNetwork]

I mean I did at first as well and I agree it wouldn't be a bad idea. But honestly as my battery collection has grown due to taking advantage of free battery sales, I honestly can't say I would buy one anymore. I honestly have 4-6 charged batteries laying around at any given point, so why fool with a cord?

[@alminhelex]

@@OmegaGamingNetwork The more I use my batteries, the sooner they will die. I have the angle grinder and used it to build a bullpen wayyyyy away from any outlet. Super convenient so I don't feel bad when I run out of juice. But when I'm in my shop working on things running out of juice is a kick in the nuts with an outlet right there

[@OmegaGamingNetwork]

@@alminhelex fair enough and when I get to the point where I need to start replacing them and don't need any new tools, I might feel differently. But for now at least, I've only had one battery die in the past 3 years. The rest are going strong. I'm happy to not drag around extension cords if I don't need too.

[@slylockfox85]

Aren't wall sockets limited by 20 amp breakers though? I read that battery tools don't have this limitation (Milwaukee HO batteries can output 40-50 amps) and therefore have more potential. And as others have stated, it you wait for battery sales/deals, you can get them for free or at a pretty reasonable cost.

[@alminhelex]

@@OmegaGamingNetwork My 2 5ah batteties for my Milwaukee are seeing the light, and I have fried an 8ah lol hopefully the 6ah with the better layout to stay cooler will survive a bit longer.

[@SUMDUDE.]

Lmfao 🤣🤣 the picture of the Hitachi wand! 🤣😂🤣

[@trystandake178]

thought that shit was a vibrator

[@robertrada4783]

The Magic Wand is probably built better.

[@baseballdude8491]

I converted my wife's magic want to the 36V battery-was she loves the torque

[@XAnonymousGuyX1]

This channel is a constant reminder that I love my 3/8 and 1/2 Rigid impacts. 😅 They’ve put in some serious work for me.

[@rafaelmarin1963]

I don’t know why I keep watching these videos. I’m not even in the market to buy new tools. I just love this channel!

[@gavdomdad]

This is something I've wanted to see but never thought I did. Thanks guys!

[@stefanczechorskidds8435]

That plug in (corded) adapter is really a useful option!

[@tommymohlen8919]

Only channel tht have the bell ringing in my feed. Keep up the amazing work good Sir! Also, have a fantastic friday people!

[@TheJnblackwell2007]

Always on the lookout for my TTC fix! Thank you😂

[@jakechef994]

test the 1/2 in 18v metabo hpt next that puppys impressively powerful for its size

[@mudpuppy318]

Edit 2.0 So I now own both the 3/4 and 1/2 version of this impact. They are both very similar in power to each other. They are basically the same size and weight which is extremely heavy compared to other brands. I have switched careers from hiway trucks and now work on heavy duty stationary engines and compressors. This 3/4 worked fine for semi lug nuts (450lb/ft) but cannot touch most large head bolts (650lb/ft) I have to crack them loose first by hand and the 1/2 is extremely bulky for its power output so I rarely use it. But for the price they cannot be beat. I’m probably going to upgrade them for something with more power soon.

[@TorqueTestChannel]

Great info! Thanks for sharing

[@arturob5306]

How would you say it stacks up to the Milwaukee M18 in your experience? Would you recommend the 1/2 or 3/4 Metabo/Hikoki for someone who needs a budget friendly impact and doesn’t need a super amount of beans? I guess they get the job done right? I recently switched to Hikoki tools and I am starting a Hikoki collection and I want to know which impact to go with

[@BlindBatG34]

Ohhhh... The tool truck round!!! I'm putting popcorn on the shopping list. Snappy better have a good showing given how long it took them to release their brushless 18v and the stack of benjamins it takes to buy one.

[@Jay_Ira]

I've been waiting patiently for you guys to test the truck brand High Torques. Cheers to you guys for another great video!

[@TorqueTestChannel]

$2,250 worth of fun! You can imagine why it took us awhile to dive in

[@gubbben123]

It would be embarrassing for snap on to get beat by harbor freight

[@peterfaggella3120]

We need an "about me" video from you guys! You (and your cohorts if you have any), appear to work in the automotive industry like a lot of us here, but definitely have more knowledge of torque and physics from the usual technician. We're curious!

[@TorqueTestChannel]

2 of us work with tools everyday the 3rd has an engineering background

[@TCPUDPATM]

How about a max battery vs 50% battery test?! A “special video” perhaps. Just throwing it out there.

[@TorqueTestChannel]

We're working on testing ALL battery levels from multiple brands

[@TCPUDPATM]

@@TorqueTestChannel Woohoo! That’s great news :)

[@jamesbondo5895]

Good idea

[@8power0]

YOU GUYS ALWAYS KNOCK MY SOCKS OFF, THAT WAS A GREAT EPISODE AND TO THINK THERE'S WAY MORE TO COME THANKS TTC!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@mineshallnotbeinfringed9676]

Great channel, thank you. When are you guys doing plug-in and cordless drills?

[@88ElevenShop]

Really enjoyed your videos! You are my inspiration! I have shared and introduced your channel to my Vietnamese friends!

[@TorqueTestChannel]

Hey thanks!

[@Mkamin927]

I really enjoy that milwaukee is the base comparison for 1/2 inch cordless impacts.

[@alexanderklepczarek8726]

I love this video and how it didn't waste my time! Keep it going!

[@flannel7977]

0:41 no way did they put that in there 😂😂😂 you guys are legends

[@DrRockVonnstudwell]

I really like mine, I've had it for 2 months. Ive noticed that low speed you had noted as well. It feels like sometimes it spins faster than other times and I'm not sure why it does that. My favorite part of owning the tool is that after a day of rotating tires constantly my wrist doesn't feel like it's gonna fall off from all the impacts.

[@gideonxiong7525]

YES!!! Thank you for doing this review!!

[@Fix_It_Again_Tony]

I'd like to see you test some of the lower torque models as well like the WR18DBDL2Q4.

[@Whateveryouwannacallme]

I just ran across a video for a impact wrench on shop tool reviews channel. It’s the. Durofix RI20174-PM P20 Series 20V Cordless Li-ion 1/2” 369 ft-lbs It’s 179$ for the kit. And seems like a sweet tool for the price. Maybe we can see the torque test channel test this impact. I really want to see your testing of it to see if it really is as good as it seems to be. Your channel always seems to be a great fair and honest test on the tools.

[@laernulienlaernulienlaernu8953]

I love it! A plug-in battery for your cordless tool 😆

[@sideeyes7480]

I have always enjoyed Dark Green tools for almost a decade now, because their cost to power ratio is pretty good. Once again, I’m no pro but I do like a quality reliable tool. Anecdote: I switched to dark green after a newer yellow brand let the smoke out (not too long after purchase) that plus their saws not being quality I would expect for the price. I sought out something new and it was dark green 😍 (and M12’s).

[@drackar]

Honestly, that yellow brand is out -performed for longevity by everything. I have Ryobi tools that have lasted longer than three Dewilts my dad's bought in the same time period...and my tools get about 10x the actual use.

[@jeffreytabor8788]

Keep up the awesome work. Thanks for the videos

[@jeffreytabor8788]

I cant wait to see Milwaukees new 1/2 impact when it comes out.

[@Joethetoolguy]

That’s incredible. Now just gotta find it on sale.

[@drivingmemad7127]

0:38 ha well played sir

[@dirkslifeadvice5339]

Hpt feels better to me than milwaukee for sure. I love the smooth clock of the battery vs my milwaukee tools.

[@ghumphrey85]

Looking forward to the tool truck episode as I have a mix of snap on and Mac(red dewalt) power tools. As for metabo, that name is very synonymous in the welding world as some of the best grinders made in Germany. Now that the wife’s toy company owns them it’s nice to see them still doing well.

[@todd5082]

How about testing the torque of 12v car starters (electric starters for gas engines (flywheel). They all claim “max torque” high amp geared motors. Thanks.

[@ashkebora7262]

Are those going to even be in the realm of something you could hold, or would that take a rig? lol I don't recall seeing anyone do more thank kick start a few hundred CC in quite a few years... Impact peak is one thing, but to power through compression? (or does compression get more even with more cylinders? ... eh, either way a starter doesn't sound weak to my unknowledgeable self!)

[@dreadswizzard9142]

Are you talking about the actual starter motors or a jumper pack?

[@todd5082]

@@dreadswizzard9142 I clarified the suggestion. Thanks! FYI, the lithium battery jump starters have all been tested many times before on KZbin.

[@SupremeRuleroftheWorld]

@@todd5082 and the tldr on those is simple: they are basically all shit.

[@johnargumaniz9179]

I’ll refer you to project farm for that

[@flhusa1]

Grainger would come to my work to show off new tools and I was asking reps from each cordless tool company why can't I have a plug in adapter for my cordless tools . They all laughed and said why would you want to put a cord on a cordless tool ? I just shook my head . Maybe so I can have consistent performance on the 50 bolts I have to remove on a piece of equipment . Nothing worse than diminishing performance especially on old nicad batteries and then I have to manually go back to hand tools and use the tool as a glorified nutrunner . Well it only took them 20 years to see what I told them was a great idea . What is the maximum amps that adapter puts out and does it maintain the voltage at max current output ? Lower voltage draws more current to get the same output . Could you please take adapter apart so we can see what they are using to rectify to DC from AC and if it is a transformer or a switching power supply and voltage regulated .

[@snoopdogie187]

My question, why use a cordless tool with a cord when you can get some sort of corded tool that would function the same and probably be cheaper. The only advantage I can see now is they really don't make corded tools as much now. I would think an air tool would be the lightest, with very good power.

[@TEDodd]

@@snoopdogie187 yiy answered it. They don't makemAC powered corded tools like impacts. Actually there advantages to the DC motors in these tools, it's just the batteries that suck. Better than the Nicad days, but still suck in the long run. Also, being able to go cordless when needed without 2 tools would be handy. But when in a shop with constant power available changing/charging batteries all day sucks.

[@baseballdude8491]

@@snoopdogie187 with Metabo HPT u can use it where there isn't power but utilize it where there is saving battery longevity as well as increasing your overall run time and work capacity and not have to carry around a corded and cordless tool in your truck-makes a bunch of sense and we utilize the AC adapter at our Mitre saw, table saw, router , grinder, SDS Max rotary hammer and vacuum stations on the job site-if we need it for an area where not AC is around we put a battery in-its awesome and has given us more longevity on our batteries as well and lessens the # of batteries needed overall saving gobs of $

[@HoosierDaddy_]

I use several cordless tools and usually go for makita as my everyday stuff, but.... My Hitachi impacts are always stronger. Hell, I can take off car and light truck lug nuts with my Hitachi impact driver!

[@Fix_It_Again_Tony]

I've used my Hitachi impact driver on cars before too. It's great for saving time on most fasteners. I really think Hitachi/Metabo HPT make some really good cordless tools. I've had my 18V drill and two batteries for 7 or 8 years. I think the batteries are starting to show signs of age, but all things considered I am very pleased with the performance overall. They are a fantastic value.

[@jakec3185]

Looking forward to the tool truck comparison

[@Dodge4x4]

Just curious, have you done a video on the Milwaukee 2769-22 2"ext anvil 1/2inch drive. Be really interesting to see how it stacks up to the original 1/2inch drive m18

[@drebin1733]

KZbin leads me on some journeys, I’ve gone from comparing gun specs on destiny 2 to comparing drill specs.

[@rimmersbryggeri]

I would like to see wether the high torque impacts have enough power for a tool like the OTC hubgrappler.

[@sonofbladecentered8732]

you should test the 3/4" drive version of this, would love to see how it compares to milwakee's 3/4" m18 and makita's 3/4" xtg

[@deeiks12]

It would be awesome if you found a way to test Kielder as well against the expensive ones. Would love to know what all that fuss is about.

[@towboatjeff]

Can't wait to see the tool truck high torques tested. I have a feeling they won't do any better than the regular cordless tools you can get at the home improvement store.

[@JosephArata]

Cordless tools are scam. While I won't sit here and say all of the tool truck tools aren't a scam either, some of them cost the same as what you could buy from amazon and have the same and/or better power as a cheap scam tool from the hardware store designed to fail in 2-3 years.

[@chuckschob107]

Can you test die grinders and there horse power claims?

[@tomstr21]

Man I'd love to see you guys get your hands on Narex 60V impact since I really have no idea how it stacks up against more known brands but I really don't know if you can get one...

[@volvo09]

Very interesting... I've seen that wall adapter and thought it was a good idea. Especially for a finish carpenter using the mini circular saw all day.

[@stinkycheese804]

Would make more sense to just buy a corded saw, then with two tools you put less wear on each, and can move around without dragging a literal brick with you on the extension cord.

[@spottedcrow1126]

Some people don’t want two saws though.

[@landonmaurer2453]

@@spottedcrow1126 right? already carry too many tools and im just an apprentice

[@baseballdude8491]

Go ahead and drop another 4-500 for a.second saw I luv my 10" mitre and table saw Both are best in industry at that price range.and the table saw beats em in performance by far and capacity on the table

[@baseballdude8491]

Yeah and AC adapter great for SDS Max Rotary hammers, table saw, vacuum, grinder, and other high run time tools

[@Therealphantomzero]

This is what I've been waiting for do you guys do the other impact wrench and give it a try

[@Therealphantomzero]

And I think this exact model has been out for years so it's not necessarily a new model

[@makeupyourmindinator]

I wonder how long it would last before giving up the ghost if you zip tied the trigger with the a/c adapter on it.

[@brandonlee8400]

👍👍Oh! I can't wait for the truck tool stuff.

[@garrettanderson6726]

I’d like to see the snap on 3/4 pneumatic MG1250 vs the Milwaukee 3/4 gun

[@SmokiesDen]

I have the low torque or whatever half inch 18 volt metabo, good enough for around the house. You guys planning on testing the 3/4" version of the metabo hpt 36 volt?

[@MrRandyj72]

Ryobi keeps blasting me with advertisements on another new 1/2 impact claiming 1170lb break away and 700lb fastening torque. You guys already planning on testing it?

[@TorqueTestChannel]

Working on it!

[@joses1743]

I want to see that torque teat as well!!

[@kristianmalette1146]

Can you do the reverse like to wireless a wire impact type of shit... It Will be very intresthings🤔

[@guantai69]

The corded option is also more environmentally friendly if you're simply using your tools within a small area of work with receptacles.

[@jimmykip1joe327]

Is it possible you could test a 1" 2 stroke impact gun

[@survivor1014]

You should test the Power Torque 20V 1/2 inch impact wrenches.

[@marauder2525]

Metabo has a lifetime warranty as long as the tool line is being made. When the tool line goes away, so does your warranty. Also, all of my Metabos are IP56 rated... IP56 = Protected against harmful dust (first digit) with protection from strong water jets and no harmful effects of strong water jets from all directions (second digit). I enjoy your videos...thanks for testing!

[@stinkycheese804]

lol, do you realize what the IP56 rating on their impacts is? That is only for the hammer mechanism itself, dust or water will wreck the rest of the tool long before it would have wrecked the hammer mechanism, aka creative marketing that has limited purpose. Also, typically the batteries are not rated for that so where will you use the tool without the battery? I mean exposure for a moment, sure a coating can keep the tool running but regular exposure, will destroy it and would likely be considered abuse that is not covered under warranty.

[@marauder2525]

@@stinkycheese804 It doesn't matter since the original purchaser has a Lifetime Lithium Ion Tool Warranty and a two year warranty on batteries. "Lifetime is defined as the serviceable life of the product. This is defined as the period during which all components are available." So, it's when you are outside these warranty windows that dust and water matter! So, I guess you better have some back up tools!

[@Biaanca5036]

I wash my impact driver with soap and water if it gets black crud all over it. That drives ip56 doubters crazy The motor and controller are putty'd into their own walled off sections in the shell and the controller itself is contained within a massive 1/2 inch solid acrylic brick with wires coming out of it. 😁 The only real concern in a tool like this is (probably) just maintain the rust inhibitor on the stator from time to time

[@baar6892]

Metabo did actually honor the warranty of an old Hitachi drill that I've had for about 5 years. The chuck wore out and was giving me issues. Sent it in to Metabo, they replaced the chuck with a new one and had the drill back to me in under 2 weeks. I was pleased to say the least and now own basically the entire 18-36V lineup. Great luck out of them all so far.

[@ToolDeals]

You're implying that once the tool becomes discontinued it's done. That's not true at all. As long as there are still parts for it, it's covered. That also doesn't mean they won't just give you the new version. They generally carry parts for 10 years after it's discontinued. This is per their words exactly.

[@wadebarnes6720]

I'm debating on which one to get the metabol or the DeWalt

[@darthtater]

Put a torque wrench on that load cell! Plz.

[@IPHONEhn504]

The one I was expecting to see how is it going ti performed

[@pandamyfb186]

greetings have you tried ingco brand?

[@ufovivax1571]

the cord adapter is also available with a battery backpack.

[@ChannelZeroOne]

I have The larger of the 2 Dewalt Vacuums that comes with an optional cord in the event you dont have battery or its dead. I have found the cord to be much weaker than the battery mode. I typically use the 60v 6ah batteries which is notably more powerful. However it's a vacuum.

[@baar6892]

Are you guys planning on testing the Metabo HPT 3/4 in version? I'm curious to see how it stacks up against its 1/2 counterpart, both corded and cordless.

[@bartfoster1311]

It is only rated for a 40 or so more lbs than the half inch so I don't know if it's worth it. I have the 3/4 model but there didn't seem to be enough interest to ship it to them.

[@wildbill23c]

I figured the plug in adapter would have boosted the output torque, but as demonstrated it did the opposite. Course a dedicated corded impact would be totally different anyways, but a great demo that plugging in an adapter on a battery tool don't necessarily mean it'll make it better.

[@yorselrus1996]

I wonder what the Metabo 3/4" high torque might do

[@Visionariuso]

Could be the losses in efficiency with the ac to dc inverter that makes the powerloss compared to the battery. Making 2000w in from the wall but around 1200w out from the adapter (up to 60% efficency at 120v) that would make it 33amps at most compared to around 35amps of the battery.

[@ToolswithSoAlz]

I said the Metabo would be one of the most comfortable and powerful. I think I was right.

[@Mittencarpentry]

Hey! That impact looks oddly familiar!

[@JamesKT7997]

Can u test 1/4” impacts pls

[@vaderdudenator1]

Tool truck impacts should yield some spicy results

[@pollydor07]

Thanks

[@andrewscott8892]

I've always wondered why no other company offers an ac adapter like the metabo, now I'm really curious knowing the tool doesn't lose much power(which was my assumption before)

[@SupremeRuleroftheWorld]

the lower performance of the corded thing is because of the wire. the actual converter that makes the 36/40V is in the brick and the wire between the adapter and brick is what causes a voltage loss and thus lower total power.

[@SupremeRuleroftheWorld]

@@1pcfred the brick can push out 50A. that is more then what the batteries can do for any reasonable time.

[@SupremeRuleroftheWorld]

@@1pcfred its litteraly written on the unit by law what the output is. No need to guess or test. The power loss over the wire is simple ohms law.

[@teaganroehl]

Can you test durofix 60v?

[@phillipmoody710]

What's with that 2x4 belt clip?

[@piotrkozbial8753]

Was this an original AC adapter from Metabo? Is so, I would simply assume it is power limited on purpose in order to not discourage users from buying batteries.

[@cotylee3525]

Durofix DXP 60V Cordless 1/2" impact claims 1500 beans. If its anything like the jump we saw with the 40 volt makita it could be the most powerful 1/2 out there.

[@4GibMe]

I have 2 of the Metabo 36v Angle Grinders. They hold their own, no problem, and the batteries last for days. But, man, there is allot of heft there to lift.

[@teaganroehl]

Love metabo

[@markdegroot9201]

There is a new model of hikoki. Its a mid size 36v impact, and im really curious how that does compared to this one. Because i have this one but its way to bulky for normal use. So if the mid size is good as well i would consider buging that to. Would be interesting to see next WR36DEWRZ

[@RanDom-pl7fx]

ik heb die ook binnen, ergonomisch vele beter, minder trillingen, minder gewicht, maar voor de rest vrij vergelijkbaar

[@nickfountain8420]

I've been keeping an eye out for them to test that new mid-torque also. I'm mainly keeping an eye out to see if Metabo offers any decent Black Friday or X-mas pricing on them.

[@georgef1176]

Milwaukee needs to make a ac plug in for the lineup

[@cowthedestroyer]

Would love to see breaker bar brands how adaptors effect them and for shits and giggles a breaker bar vs some half inch offerings

[@stinkycheese804]

Adapters don't effect breaker bars nearly as much because there is a constant force (only once overcoming that resistance) rather than the hammering action that keeps having to overcome it on every blow, assuming apples:apples quality. Frankly it is a bit irrelevant, breaker bar may not fit or else could just use a larger one, when the whole point was to not have to use one and go faster.

[@TheDannyg93]

Is there going to be a comparison for tool truck 1/2 stubby air impacts?

[@TorqueTestChannel]

Yes!

[@LilasTools]

Awesome testing, I’m really thinking of getting into Metabo HPT line mainly for the angle grinder and being able to use a cord and battery!

[@Mario190249]

I doubled down into the same impact, grinder, hammer drill, and recip saw. No complaints at all, phenomenal tools Also took advantage of there webpage promotion at the time, buy a tool and register it on there website with proof of purchase. Then you get a choice of a free 4ah 36v battery or the wall adapter. I got a lot of batteries now + 1 adapter 😀

[@baseballdude8491]

Absolutely the 36V grinder, SDS max Rotary, vacuum, router, portable band saw ,10" table saw are all great tools to utilize this hybrid cordless/corded option

[@alliance1993]

Test the porter cable cordless next please

[@j.c.vanniekerk7761]

Can you please try and find a german metabo impact rench would love to se how it would score

[@robertrada4783]

The way you say German Metabo you’d think that their cordless tools are Made in Germany… 😫

[@carll.freemanjr.9867]

I haven't seen a PowerTorque O'Reilly brand brushless 1/2 impact tested on your channel yet. If it has can you link that video to this comment in a reply? It advertises 365 ft lbs of torque and I'd like to know how accurate that is. It costs roughly $125, price may vary on location.

[@NickOvchinnikov]

What happens when you take apart the biggest battery of a brand and replace the li ion cells (18650/21700) and put in the best high drain cells you can get. Like the molicel p45b 21700 cell or molicel p28a 18650 cell

[@jonathanbiggar4973]

Just brought a new 3/4 metabo looks a bit different to this one , 18 Volt in Australia 🇦🇺 , model is 1750 Nm on the box my guess is it will be a beast , yet to put it to the test .

[@aaronbritt2025]

So, I looked through all of the videos released after this one and haven't seen the tool truck high torque's reviewed yet. Is it still coming?

[@TorqueTestChannel]

Starts this week

[@ilove2shopalways]

Metabo is beast all day long in construction

[@SargTeaPot]

YES FINALY!!!! the one i have !

[@SargTeaPot]

Damn! i am impressed! always knew its beans were worth its weight! Thanks for testing it guys!

[@JackdeDuCoeur]

Always good.

[@jaredfays7861]

You guys should do a flexzilla pro, it claims 800ft lbs

[@swordscar6278]

Take a 12v impact and hook it up to either m18 battery or just a straight car battery

[@ImpalaSSRulz21]

About 10 years ago I adapted my craftsman cordless tools to run off a car battery. It let me run my sawzall and skillsaw much longer without bogging. These lithium batterys are great now though.

[@JosephArata]

Ok, if you say so. The lithium batteries are a marketing scam designed to make you buy batteries every 1-2 years.

[@ImpalaSSRulz21]

@@JosephArata well they are better than my old ni-cd batteries haha

[@TEDodd]

@@JosephArata higher power density, no memory effect, and longer life. No scam. That's why other electronics have switched too, like your cell phone.

[@baseballdude8491]

@@JosephArata dude every comment is a cordless hater take-look I still run corded tools but many of these tools make work go faster without as much set up-Metabo HPT 36V should be your choice to give em a whirl as they have the AC adapter for all those tools U want to stay in AC but also afford U the ability to unplug when u need to take them to the work where ni AC is available Plus I've had some of my Milwaukee, Makita and Hitachi batteries for over 10yrs and they are still charging and working

[@saintsarecoming13]

I have a Mac tools BWP151 I'd be happy to have tested by you

[@varmint243davev7]

Good video, Good channel

[@davidtru4529]

Can you test Cordless ratchets