What IAG block is right for you?

[@Smeedia]

Thoughts on the Stock RA Block compared to your Stage 1/2 block? For the price point of around $1900 for the RA and the amount of power people are making with them its hard to beat for price for power.

[@Bursti_]

I am curious about the closed deck ej205 they just released.

[@ARCH.JALALJABARI]

It’s not about “the power ppl are making with them” it’s about how reliable it is!!how long would it live!! Ppl made 500-600whp with stock blocks! It’s about the confidence when you go full throttle every time!

[@Smeedia]

@@ARCH.JALALJABARI I've got an RA Block making 460 WHP on pump gas and that engine takes a beating fairly often. I've got a pretty good amount of confidence put into the newer OE Engines.

[@Smeedia]

@@Lennysuga there's a few people making over 600WHP on them, others have hung out around 500-550. The one in my 05 is hanging out at 460WHP on pump gas without issue.

[@ARCH.JALALJABARI]

@@Smeedia still there is a guy who have made 600whp with that white 07 been dragging it a lot and it was a stock block. Ppl are making a good power with RA engines but I personally would never buy it new over a build block!

[@markusdemain11]

Good explanation of the the different rods used between the stage 2 an 2 tuff. Much appreciated video 👍

[@theiagchannel]

Glad it was helpful!

[@thomasmurphy5906]

Thanks for breaking it down, excellent info, engine building operation looks clean and streamlined, great job guy's

[@theiagchannel]

Glad you enjoyed it

[@Chris05STi1982]

IAG600 long block here!! Very nicely done video explaining everything. Loved the Dave Chappelle SLAP 😝

[@theiagchannel]

Glad you enjoyed!

[@mvp2000pj]

My IAG stage 2 block arrived last week! Car is st the shop now. It looked amazing and I am so excited to get my 18 WRX back!

[@jayman4874]

Did you also spin a bearing ?? Cause that’s what happened to me 😂

[@theiagchannel]

Hope you enjoy it!

[@Bang4YerBuck]

Thanks for making this video, it is very helpful. Thought I was going to want a Stage 2 or 2 Tuff when the time comes, but a Stage 2.5 is what I'll need.

[@lucasduggan6037]

Yeah wish I woulda had this video over a year ago when I built my motor. Got the stage 2 as it was on sale and now I feel as if I’m stuck lol only have it a 450whp but to scared to bump it up cause of reliability 🤦‍♂️

[@Laserwurks]

Very interesting video. I have built quite a few performance engines using stock components with varying stages of modification to them. Only thing I missed in your video was balance checking on all the components.

[@chrisweir1097]

Take a shot every time he says “Ok”. God damn!

[@Gundoor]

Came here to say this

[@Shine13373]

Would be dead before stage 1

[@PennilessDataChannel]

Or “you know”

[@twodollargarage]

Would love a video like this specifically for the ej20 short blocks and head options

[@bassmanbn]

I hope my STi engine doesn't blow...but if it does...I know where to go. Great video.

[@theiagchannel]

Thank you!

[@needshift]

cant wait for my stg4x to show up! excited to continue to push the limits

[@BigSlickRick75]

would love to see a video covering long blocks and/or heads

[@theiagchannel]

Coming soon.

[@vernonjordan9335]

literally the question i had in mind about these blocks at 19:45 thanks for asking and answering it

[@ozzysgarage]

Been rocking the closed deck for two years now and still running strong. Just make sure you're doing proper maintenance with Motul fluids 👌

[@thomasbovard5292]

What are you running for whp? I just got tuned at ~550-560whp on my 700 longblock. Hoping it’ll last several thousand miles if I take care of it and treat it right.

[@TMar129]

@@thomasbovard5292 you hope it will last several thousand miles...?!?! That's it? Do you think it won't last several HUNDRED thousand miles? Are you tracking the car or daily driving?

[@thomasbovard5292]

@@TMar129 I was only driving it 1-2k miles a summer, so several thousands were more like 50-60k miles. But I ended selling the car, life had other plans

[@bumamotorsport4573]

There is nothing special with Motul. Chose the right weight/viscosity.

[@B1SQ1T]

Purchased a stage 2 10.5:1 FA20 for my turbocharged 86, can't wait for it to be done!

[@airborneSGT]

Marylander and STi owner owner here. Think I need to take a trip up to the shop!

[@theiagchannel]

Come on by!

[@ИннаСалогубова-я8ъ]

Эти парни умеют строить правильные двигатели Subaru! Отлично.

[@E85_STI]

I have an IAG stage 1 pushing 480-500 wheel on a mustang dyno. It’s held up well so far and I just submitted my oil for analysis. I want to push this block a little more depending on the oil results. The cost was 3k for just the block. I have seen posts about 600 wheel on RA blocks but I don’t know what dyno they were on. I know the stage 1 is 500 BHP so we’ll see how it holds up for the long run.

[@sturdyspamsl2277]

update ??

[@chrisguzman7926]

is it the short block or long block? not sure which one to go with

[@E85_STI]

@@sturdyspamsl2277 I didn’t even know you commented it’s late but the block is being sold now it’s held up just fine and now I’m going with a closed deck stage 2.5 and going rotated with a precision 6266.

[@STiGuy]

@IAG Performance, any reason the Stage 3 & Trojan blocks was skipped entirely? I understand that it shares a lot with the Magnum block but it would’ve been nice to hear the input on the copper sealing rings found on them which arnt used on any of the other blocks in the video. That plus it steps up to the Tri Beam Rod in the Stage 3. I think a video in the same format going over the difference between the Stage 3 Extreme, Magnum, & Trogan blocks would be a fitting addition to the channel.

[@theiagchannel]

We recently evaluated each of our short block offerings to determine their popularity. The Trojan and Stage 3 Extreme blocks were two of our least popular offerings. In an effort to direct our limited resources towards the best selling products we made the decision to discontinue these blocks. For those that have previously purchased either of these blocks, don't fret - They are still excellent choices. We simply removed them due to lack of popularity, along with the fact that several blocks in our lineup "overlapped" with regards to power ratings.

[@theiagchannel]

We recently evaluated each of our short block offerings to determine their popularity. The Trojan and Stage 3 Extreme blocks were two of our least popular offerings. In an effort to direct our limited resources towards the best selling products we made the decision to discontinue these blocks. For those that have previously purchased either of these blocks, don't fret - They are still excellent choices. We simply removed them due to lack of popularity, along with the fact that several blocks in our lineup "overlapped" with regards to power ratings.

[@oswaldolopez6141]

can you guys make a video explaining you long block you offer and what head step best for your short blocks ? PLEASE love this video

[@theiagchannel]

Coming soon.

[@asoto401]

I Plan on purchasing an Fa 20 stage 2 block and have you guys install on my 2018wrx I don't want to change my transmission.

[@theiagchannel]

Video of our FA20 stages is in the works.

[@Cwrigh25]

I don't even have a subaru and yet I'm a fan of IAG. Wish you guys built SR20 short blocks.

[@aaronjessome1032]

More of these videos!! Awesome!

[@dougcastle1785]

I have a 2016 STI and I am lost in sauce about everything they are talking about 😔. Good thing I drive like a grandma and do all my fluid changes on time.

[@theiagchannel]

Anything we can help you with?

[@MR__JUSTIN]

It takes a long time to learn all this stuff, don't worry just keep watching quality videos and you'll start to figure everything out

[@FvD714]

was looking forward to hearing about the Trojan

[@theiagchannel]

We recently evaluated each of our short block offerings to determine their popularity. The Trojan and Stage 3 Extreme blocks were two of our least popular offerings. In an effort to direct our limited resources towards the best selling products we made the decision to discontinue these blocks. For those that have previously purchased either of these blocks, don't fret - They are still excellent choices. We simply removed them due to lack of popularity, along with the fact that several blocks in our lineup "overlapped" with regards to power ratings.

[@FvD714]

​@@theiagchannel understandable. have a great day ✌

[@nautilusofficial8720]

thanks so much for making this video

[@theiagchannel]

Glad it was helpful!

[@RobHTech]

seems high quality. Better than that vid I just saw of like 20 minutes of some guy from IAG stopping to get fast food in a 2022 WRX and showing how to fill the gas tank at a gas station. 23:00: says stage 2 has same block, pistons, procedures, but uses H-beam rods, then after that says that the pistons and rods have been upgraded. Which one is it?

[@Lukeladd95]

IAG OR BUSTTTT stage 2 block running strong here ! 20lbs

[@igorushka]

I have 27lbs of boost. Just forged internals and arp2000 head studs. Two years also. And had it at 35lbs !!! of boost for two weeks! It was amazing! Nothing bad happened.

[@royalplayasfor]

Damn I’m pushing 20lbs on my stock ra block I’m scared now lmao

[@crimsonnimbus158]

Old guy has an uncanny resemblance to the bad guy in the Saw movies lol.

[@inkno701]

Thanks for all the great information! I was watching a video by ThatDudeInBlue and a tech at Offtheline Performance said that once you separate the case halves you need a special machine and need to line hone it and that only like 3 shops in the county have (is that the machine at 8:02?), but you guys only use it to straighten the bearing holes on stage 4, so is it necessary to line hone it anytime you separate the block? Or are you guys able to pick and choose from all the bearings you have to find ones that match perfectly? I think I have a IAG assembled block in my car since 2012 (did you guys make a deal with Import Image Racing around then that allowed them to sell your stages of blocks under their name, but I pretty sure I remember they accredited you guys with doing all the work on the block.)

[@ANL4JC]

What about the Trojan and stg 3 xtreme? Why skipped them?

[@theiagchannel]

We recently evaluated each of our short block offerings to determine their popularity. The Trojan and Stage 3 Extreme blocks were two of our least popular offerings. In an effort to direct our limited resources towards the best selling products we made the decision to discontinue these blocks. For those that have previously purchased either of these blocks, don't fret - They are still excellent choices. We simply removed them due to lack of popularity, along with the fact that several blocks in our lineup "overlapped" with regards to power ratings.

[@joshuathomas4934]

I just drive my wrx to hiking trails and to the grocery store. I think a type RA block would be sufficient. Seeing as it’s 2000 vs the 4000 that IAG is selling theirs for. You guys should make an RA block with upgraded pistons and bearings and sell it for 3000. 4000 is steep.

[@sappk4908]

Need one of these 800bhp short blocks for my FRS!

[@anotherstar8125]

Can you run all of these engines as a "stock" engine and still pass smog (CARB-legal)... I was just curious if it was possible to have an IAG engine that I can run as an OE-replacement but have the benefits of toughness/durability and the potential to increase power beyond 500hp down the road (if/when I move to a different state).

[@sweatyben1550]

This is exactly what I'd like to know as well

[@thenormalworldofwes6656]

Did anyone find out if that is possible?

[@ogsmokey187]

Hi, I live in CA as well. Just make sure your compression ratio is going to be very close to your original block and head set up. forged or not, so long as the stock tune can run the fueling correctly for the brief period during smog, you should be capable of passing without issue. Granted your emissions devices are all installed and functional. for example, a 10:1 compression engine on the stock map would likely be a huge no-go and be impossible to pass smog as a result.

[@sweatyben1550]

@@ogsmokey187 thanks for the info brother I really appreciate it. I haven't been able to find many threads on the topic so your input is very helpful

[@turbocompresso]

@@sweatyben1550 Hi, I have two WRX STI 2.5, one with stage 2.5, and one with iag longblock 900, if you use a standard thickness gasket (stage 2.5) the compression ratio remains the same as the standard EJ25, so by mapping the ECU correctly you have no problem, you could also map the 3 maps in a different way, in order to pass the emission control with the first map. If you just want to make the EJ25 engine better strong, you have two options: 1 Buy new pistons and connecting rods and keep the power low, or take for example a 2.5 iag stage, using the standard gasket, and a standard head, then you will have power in safety and no problem with emissions. If you need it, I have 2 WRX STI with IAG engines. A greeting

[@TurboDub1991]

You guys are the best

[@PennilessDataChannel]

Take a shot every time he says “you know”

[@ERDesertFox]

super informative, great info guys

[@theiagchannel]

Our pleasure!

[@dorianleclair7390]

Love the stuff IAG make.

[@theiagchannel]

Thanks for the support!

[@DJ_Driven]

What about offering billet heads that change the exhaust ports angles over the factory restricted design?

[@ohhthepatpat]

Vw guys said the same thing.

[@georgevandertogt2400]

How are you going putting the 1100 hp to the ground.

[@LosMt2]

I've been looking at 2.5 block and the site states "Case Machining - Modified for improved oiling" but this was not mentioned once in this video from any block

[@piratelechuck1911]

I just spent way too much money getting a mostly stock build, with an old used bottom end, and forged Pistons and h-rods. The piston slap sounds atrocious and I was told it's completely normal. I'm still in the break-in period and I'm terrified about what will happen when tuning begins. If I'm lucky, she holds. Otherwise, you guys have my money booked for the next build. I wish I had seen your builds prior to spending the cash 😭 Your prices would have allowed me to do so much more, and with confidence.

[@theiagchannel]

Sorry bud! Sending good vibes and good luck your way!

[@christopheredwards357]

Great video, but what is the point of forging your internals on a semi closed block, when the cylinder wall flexes under heat cycles and boost pressure. Which causes head gasket failure, to say you rate the semi closed deck at 500hp is really pushing it. Here in the uk, all good engine builders highly recommend close decking at 400hp. Some say even at stock power it should be closed decked due to the movement on the cylinder wall. Forging your engine won't stop head gasket failure. Interesting video though 👍

[@kujinsan26]

He's talking 500BhP which is like 330-350whp. If your builder is saying anything past 400 he means WHP needs a closed deck. I hear a lot of RAs are making past 400whp on stock block but personally for peace of mind I would go closed deck after 400 WHP

[@anotherstar8125]

If I install all CARB-legal parts/tune on a stage 1 - 2.5 engine, will the car still pass smog?

[@Rideordie-eli]

In California, I don’t believe there are any CARB legal tunes. You need to be able to flash ECU to factory tune to legitimately pass, as far as I know.

[@_wrx_WHPFaDIT]

You should do same video for Fa20dit

[@theiagchannel]

Coming soon.

[@mr.molina7943]

When can we can get an fa series?!

[@theiagchannel]

Coming soon.

[@SGQ12]

Waiting here.. FA20DIT stage 3

[@RicondaRacing]

I just got an IAG 2.5 with 11mm 625+ CA head studs. I'm planning on making 620whp with it. I'm hoping that'll be enough to hold 33lbs of boost.

[@SiCaRiI_DaGgEr]

Considering that block is rated @ 700 BHP, you will be risking a rebuild very soon, if you factor in drive train loss you will be over the rated crank hp rating. You should have jumped up to the Magnum block.

[@RicondaRacing]

@@SiCaRiI_DaGgEr they've since relabeled the stage 2.5 to the 750 block. I think the limiting factor is the head gasket at those boost levels. If you pair it with an Athena fire lock ring head gasket, you're golden. Josh Bader has a customer that hit 650whp on that setup with no issues.... and that's a stock location turbo.

[@SiCaRiI_DaGgEr]

@@RicondaRacing Head gasket is not the only limiting factor. Type of head studs used, poor assembly, distortion ect. There are noted issues with Firelock setup if using the wrong sized studs. 14mm head studs are recommended .. I urge you discuss this with IAG and your builder. I went with the Cooper ring head gaskets by IAG's recommendation on my particular build. 2.5 Closed deck 750/Rotated setup 500whp

[@Hellblaue210]

Is there a follow up video explaining the downsides to each block? It almost seems like if you had infinite money you would just get the stage 4 or even the X block since it didn't seem like there would be any negatives to using those blocks for a daily making 300 hp. Or is there downsides to streetability to each level?

[@theiagchannel]

Good question. There’s really not any downsides to the higher stages other than cost. Buy the highest stage you can afford which meets or exceeds your power goals for maximum reliability.

[@alexudolkin2146]

Are the shortblock names and bhp figures outdated since this video came out? The IAG website has different numbers associated with current ej blocks offered

[@fredastaire6156]

I second this question! And they should make an updated video describing the current fleet of shortblocks that they offer

[@MattBowler]

@@fredastaire6156, agree. It looks like they use H-beam rods in everything up to the 950.

[@timothyhampton493]

Are the stage 2.5 short blocks compatible with stock ecu's or no?

[@wariN70]

thank you!

[@chelusean]

If I had a penny every time, I heard “Okay,” I would have a thousand dollars.

[@jesusberlanga4346]

thanks for the video

[@paulkorobkov3658]

@IAG preformace do you guys do WPC treatments on any of your parts?

[@fas2gsx]

I was just going to ask that

[@basangtiti_31]

can you put oem heads on iag stage 2 tuff block? car is 2016 STI

[@theiagchannel]

Yes.

[@cvn72abe]

So if the stage 1 block will work with the stock ECU factory tune, does stages 2,3,4 and CNC billet short blocks work with the stock ECU factory tune as well? I’m curious if all IAG short blocks can be drop in replacements for stock motor for use with stock tune.

[@MR-oy4fc]

All of them

[@Charlie589]

Need to make a block that can hold 1,500 whp lol. That'll be nice to see a EJ25 with 1,500 whp.

[@SGQ12]

Hopefully you have those stuff for FA20DIT as well..

[@ZZPxFTW]

they do. its on their website.

[@SGQ12]

@@ZZPxFTW do you have an idea what is differences of short and long block was? A side for compression

[@ZZPxFTW]

@@SGQ12 a short block is just the bottom end without heads (so casehalves, crank, rods, and pistons,) and a long block just means it has heads attached. Their ported heads use OEM castings, so stock 10.6::1 compression ratio regardless of just a short block block and swapping your stock heads, or if you do a full $15k long block from them. That is, if the head gasket you use is also stock thickness. They'll probably work with you if you want to run different pistons with larger cam reliefs or whatever though. Damn, they should hire me lol

[@SGQ12]

@@ZZPxFTW hahahahahahhaah

[@theiagchannel]

Video coming soon on the FA20 and EJ20 line.

[@6eastModej25]

I bought a iag stage 4 short block closed deck stage 5 head also have a ets rotated turbo 30-900 which power hp would you recommend for daily and also fun drive ?

[@1atinlove]

Have you guys developed your program for the Fa20 cylinder heads? If so what stages do you offer? I already have your stage 3 block, and my bare cylinders heads with all the goodies. I just need the assembly and machining. Ive checked your site and it does not offer any information. Also as the AOS is available for the BRZ/FA20 block

[@unleavenedkaraiteplus3412]

You can use an AOS on anything... even for refried beans.

[@MattBowler]

Are there long-term downsides to going closed-deck? I want a super reliable 400-500whp setup (generally on the 400 end of the spectrum), but am uncertain if the closed decks have inherent cooling issues or are prone to excessive wear.

[@theiagchannel]

There are no cooling issues with the closed deck process. Since the insert is less than an inch thick and has holes which match the head gasket, it still allows full flow of coolant. The strength of closed deck system makes it ideal for long term reliability, with no downsides.

[@MattBowler]

@@theiagchannel thank you!!

[@ThaGodfather360]

Is there a way to make reliable 800whp on an fa20? Or just I just give up and go with another car

[@davidbye11]

My question is I want to build a block, including heads. I’m sure that you could imagine a lot of questions. 2.5 tuff and what heads would be the best bet.

[@theiagchannel]

David, give us a call and we'd be happy to answer all your questions 410-840-3555

[@chirsballer7133]

How many miles would a stage 3 last at rated power and not being driven very hard

[@muslimtommyshelby2624]

A really different question , you guys ever think you'd branch out into EZ, EG subaru 6 cylinder blocks ??

[@Smeedia]

I tried about a year ago and was referred over to outfront. 10/10 suggest outfront for any 6 cyl needs

[@selvinmontes2931]

Hey friends I need a recommendation. I bought a Subaru WRX STI 2012. But it consumes too much oil. I asked the previous owner if he knew something about it and he said he had a blowby. well he cheated me .. but he told me that I had to put a forged motor short .... do you think that if I put only forged pistons and rings on it, I would solve the problem. or do I have to put all the iag short block. ??? what dou you recommend.????

[@zhplayza]

Can you guys do video for your fa 20 stages

[@theiagchannel]

Coming soon!

[@odinisgod4577]

he looks like the antagonist from saw the old guy

[@jameskocks4734]

how many work hours does it take for a short block to be replaced with a fa build?

[@dominicmaata5997]

I have a question, if i got stage 2 or stage 3 fa20 motor of frs, was that straight bolt on? Then would i need to worry about dmv /smog cause i live in california

[@footballfan7894]

I have assembly Line production skills , any job openings? Willing to relocate 😃

[@p_nutt]

Can I order a Stage 2.5 with the +2mm rod/piston combo? I really want the extra RPMs but I don't want firelock gaskets.

[@theiagchannel]

Hit up our build specialists and they can discuss options for you! 410-840-3555

[@momofpower2488]

Do you cryogenically treat your EJ25 billet aluminum closed deck stage 4 blocks? Do you offer or set up supercharging for the EJ25 also?

[@prajanrajbhandari1548]

Hi can you build EJ20 natural aspirate non turbo engine can do close deck short block?

[@christianrios7037]

Looking to make between 500-550 WHP on a FA20DIT WRX. Which block do you recommend for purchase?

[@theiagchannel]

Stage 3 extreme FA20 DIT closed deck short block. Going with the stage 3 extreme will still give you room to make more power in the future.

[@christianrios7037]

@@theiagchannel What about the 450-75 WHP mark if I didn’t want to deal with going port injection and the cost associated with that when you try to make over 475?

[@GundyrX]

@@christianrios7037 From what ive seen from local guys, still the same Stage 3 extreme block. Problem with the FA20 is factory ECU exhausts the breadth of its fueling beyond 600hp and thats when its time to get a MoteC

[@zyxyuv1650]

When will the FA24 block series be available?

[@theiagchannel]

In the testing process now.

[@adensmore100]

@iag, when are you going to be offering fa24’s?

[@theiagchannel]

Coming soon.

[@breezie_sti171]

what gasket can be used for the iag stage 2 tuff ?

[@davidclarke1015]

At what power level are the stock sti heads gonna need built

[@01KINGKENG]

So what would be the best bang for the bucks for a 500 hp block??

[@theiagchannel]

Stage 2.5 or Magnum if you are looking for future growth.

[@christopherrogers8316]

do you have a fa20 video?

[@theiagchannel]

Coming soon!

[@4RT0119]

Stage 1 block for an off-roading FXT?

[@renatoizeppi8885]

I have a sti 09 hatchback that needs new motor, what stage would you recommend if i want to use it as a daily but also want it to be fun, I'd like something between 390 and 500 HP? Thank you in advance

[@theiagchannel]

We would recommend a stage 2.5 or higher.

[@guillermoruiz9273]

Do you provide Cryo and or WPC treatments?

[@theiagchannel]

We can do custom configurations based on your needs. Email us at [e-mail] for more info.

[@wyattoutlaw2370]

How do those case plugs add strength to the block?

[@theiagchannel]

Yes, that's the major benefit.

[@brennigade]

@IAG Performance is there max boost/PSI tolerances for these motors? Ideally looking for 25-30 PSI but not more than 500whp. By HP rating alone stage 2 tuff would work, but would the stage 2.5 be recommended because it's a closed block?

[@theiagchannel]

We would recommend the stage 2.5

[@sraftyc7773]

i just dont get it, running at 210kw 574.5nm i done the ring lands, apparently oem is only good for 200kw max, fair o. so after the rebuild with forged pistons (rings etc) 14mm ARP head bolts and aftermarket ECU im guessing 230kw maybe 250kw at the wheels i lifted a head with 14mm studs, we are talking 800hp with 14mm studs? how do i even get to 500hp at the fly without 14mm studs, we are talking 500hp on a pretty much standard block (with pistons) whats the secret? edit: 2009 wrx hatch with 257 short block, obviously modified, most bolts-ons short of type of fuel used done, tho still using topmount aftermarket

[@awdobsession717]

One that can hold 25-27 pounds of boost and take extreme heat of the Arizona desert 🌵

[@boostedg215]

Snail performance Arizona is a certified vendor for iag and will definitely help you out with that

[@e36328i]

😑 Can't fool me Jim! Or should I say John Kramer! 😂

[@damienhay8555]

Which block should I go with if I plan on going around 500 whp... daily and sometimes racing it? And is it any problems going in the 03 wrx?

[@theiagchannel]

If you plan to use the 2.0 heads I'd go with the Stage 2.5 International Hybrid Block. It has specially designed pistons to work with your 2.0 heads. Give us a call and we can get you everything you need.

[@danieltowita5505]

I have a 2007 subaru impreza 2.5i non turbo I dont know what iag block can i use and heads or motor mounts ! Any help? Cant find nothing for the 2.5i i really want to put some power down with my car thanks.

[@theiagchannel]

Hit up our build specialists at [e-mail] for some help

[@judahnanas9772]

Will/Did you ever did a 3.6 H6 engine build?

[@theiagchannel]

We have not nor have plans for it

[@bradleehill9662]

You didn't really touch on over building blocks like you said you did in this video and then just saying get ahold of us and ask us questions doesn't really work. I have had one guy at your shop go above and beyond with all of my questions and orders. I still have yet to buy a part that I haven't had an issues with. With that said you have always made it right but after pulling teeth which hurts because I'm a huge fan.

[@christopherrogers8316]

if im installing a built block and there is nothing wrong with the current block, is the timing chain and tensioners ok or should i replace them? (fa20dit)

[@theiagchannel]

Depending on the mileage, we would recommend it but it all goes off inspection when they are removed.

[@cheukhimlee8394]

if I want to build a 350 whp wrx, which block suit for me?

[@MattBowler]

As of today, the 550.

[@132racingchannel8]

Okay so probably a dumb question or just not financially smart choice but can you run the series x for a daily???

[@theiagchannel]

Yes, you can run any of our stage blocks for daily driving.

[@nicholasgunson2945]

In regards to the ej20 magnum, would ej20g (1998 wrx) heads be fine to use, or would you recommend 205/207 heads? Not sure what power I want to make yet, but probably around 450-500bhp.

[@theiagchannel]

Ej20g heads would work but 205 or 207 would be better flowing.

[@richardlam909]

Is the stage 1 for an EJ25 discontinued? Couldn't find it listed on the site

[@theiagchannel]

Yes it was discontinued about 2 weeks ago

[@jmoore9806]

Witch IAG block is right for u?? Any of them if they was cheaper lol...sorry guys but way too expensive with import charges

[@kimofromkalihi]

Do you ship to Oahu?

[@theiagchannel]

We do! Give us a call and our build advisors can get you setup!