What is a Fire Alarm Annuncatior? LCD-80F

[@KJ7BZC]

Around when you were doing the drill the annunciator seemed a little under voltage or something because the piezo was going down in pitch. Just a suggestion to check on that.

[@zacharycordova5320]

Great video! I look forward to seeing more videos of your MS-9200UDLS system!

[@mrargosthesmartone6945]

Nice demonstration! I now know how to use an annunciator when I see one. Great video, keep up the great work! 👍

[@SERSafety]

Thank you for viewing and the comment!

[@leoschneider3570]

The LCD-80F has to be my favorite annunciator

[@Real_Kravity]

Hey SER, how do I fix a invert troubl and a dirty trouble smoke detector? And a ground fault loop2? System: Notifier nfs2-640C

[@TonyHollis-jo3vy]

Do you have a video on how to wire it to the control panel? Were doing a lab and it keeps saying communication fault

[@xaviercerda3841]

@S.E.R. Safety My school has a LCD-80F but by Notifier.

[@nickm5911]

Cool! I saw an annunciator with a touch screen!

[@alamorailfan]

Nick Creeks Which annunciator?

[@nickm5911]

It was a simplex annunciator... I dont know anything else..

[@nicodo123]

Nick Creeks most likely wired to a simplex 4007es touch screen fire alarm control panel.

[@BigPainter0]

I know u don’t do tornado alarms... but my old school had an old tornado siren the forties when the school was built. It sounds like a banshee screaming. It looks like a horn. The school was built in 1948.

[@almondman586]

I have been watching your vids forever. I watched one of your old videos, and you sound so different! Question: for a beginner, what setup would you get?

[@agoushy74]

Man Pizza I don’t recommend an addressable panel. I would get a fire lite ms-2 or ms-4 which you can get for a cheap price of 200-300$ new. Then get what’s called, conventional pull stations and detectors and get some horn strobes off of eBay.

[@justin_wayne_elrod_jrod]

weren't these the same ones you usually see in the target store when you walk in

[@KanoaDeCastro]

Some annunciators : Eye candy Unorthodox Annunciators : light switch single gang go brrrrrrr

[@familyfriendly8494]

Do you need a fire alarm annunciator in every floor of a building? For example a 7 floor building. Thanks.

[@johnmoses19]

Awesome explanation.....thanks for this..i learned from this.. do more for us..

[@chinosixave]

Thank you. Going to take my S-95 this week

[@the_alex_ellis_channel6923]

These may also be known as Repeater Panels or Mimic Panels in some countries.

[@andressamaniego7966]

Good afternoon do you have any tutorial how to configure the LCD-80F remote annunciator with the MS9200?

[@agoushy74]

Awesome video grant! Thanks for showing!!!

[@Transit-Fox]

Can you use an annuncatior as a panel by itself? I don't think i would like to spend thousands on a panel

[@TemporalEngineering]

You can NOT use an annunciator as a panel. An annunciator is simply an interface (remote control) to the panel. So you need a panel.

[@FireTech7]

An Annunciator will literally do nothing without the panel

[@sirensofnewjerseyissimplyt429]

Hey Grant excellent job

[@safealert21yt52]

I just got one of these and I have a 9200 panel.. can you please help me a bit? I can’t figure out the wiring situation

[@kadenr6]

When are you going to do system test 2 of the voice evacuation system?

[@denizgencer6918]

Can you show how you hook this up to your main panel?

[@andrewhere1113]

why did it show that glitch when you reset it? 3:35

[@fastcsx1412]

Wow thank you that’s so cool

[@WheeloveFireAlarms]

Nice!

[@GLOATINGMAPLE01]

Why does trouble light come on the panel or aunncitor if you use the drill button instead of just the fire alarm light

[@thesamhp8336]

In the UK we call these "repeater panels"

[@the_alex_ellis_channel6923]

In New Zealand they are called "Mimic Panels".

[@notrobloxdrivers8396]

If I were to have a very small system, like in my basement, could I just use an annuciator instead of a panel?

[@Picklebean72]

No. The annunciator requires a panel to operate

[@notrobloxdrivers8396]

@@Picklebean72 Ohh okay thank you

[@bluccs]

Can the annunciator work without a control panel?

[@Roxxofoxxo]

No.

[@firesign89]

Can you use annunciator as a fire alarm control panel

[@firesign89]

Like without the fire long control panel

[@firesign89]

Alarm*

[@evanbart4109]

Great video 😀👍👍

[@caleb0606]

When will the annunciator get replaced of fixed. Also what happened to the voice evacuation panel?

[@agoushy74]

fire alarm inspector it’s still there underneath the ms9200.

[@anthonymoreno3455]

Can you have an annunciator serve as ur system panel?

[@davidconklin3474]

Nice video

[@cookiepower1173]

Good video

[@pentiumman3338]

can you hook this particular device to an ms4 fire alarm panel??

[@Roxxofoxxo]

No.

[@christopherbluhm]

Where could I buy one of those snazzy square Fire-Lite keys?

[@firesecalert]

My dad's work has the same panel and annunciator

[@serg4220]

Can you explain annunciator location

[@gamingwithwilliamyt1341]

Why is the system in trouble when u pressed the drill button the annunciator

[@SERSafety]

Good question. When you press the drill button, the panel disables the on board dialer therefore putting the system into trouble. This is nice because then the fire department will not show up when you are just holding a fire drill.

[@spcraleigheas]

I have the little panel at my high school entrance next to a BG 21

[@shaynewaite5329]

what is the square key? looks like a fire lite key

[@cancerguywantscancer7341]

Shayne W Its the key for the LCD-80F Annuncatior.

[@djijspeakerguy4628]

My school has the Notifier version of this.

[@alamorailfan]

What is the 6th picture's model?

[@SERSafety]

It's a Notifier RZA-4X Zone Annuncatior. My Notifier SFP-400 panel can support this annuncatior.

[@alamorailfan]

S.E.R. Safety You should get that. That would be awesome. Anything for the FX-64?

[@metro_ken]

first

[@Amara21-q5k]

Beam detektor 1224 . 1000USD

[@EnderShadowborne]

Annunciator is underpowered, that's not good!

[@Memerino-ly7yr]

Your voice low

[@MinecraftPro97k]

LCD Liquid Crystal Display? Where is the CRT Cathode Ray Tube?

[@andressamaniego7966]

Good afternoon do you have any tutorial how to configure the LCD-80F remote annunciator with the MS9200?