What is a Level Sensor?

[@realpars]

Want to learn industrial automation? Go here: realpars.com Want to train your team in industrial automation? Go here: realpars.com/business

[@FeejoyTechnology]

Radar level transmitter is a very powerful sensor which is suitable for a wide range of applications and media,you presented clearly,let me fully understand radar level transmitter,I will keep you in my thoughts and hope to get your attention as well.

[@ai5573]

Capacitive level sensors can be used for continuous level measurement just as well, as far as I'm aware. There're couple more ways of continuous level measurement that would be worth mentioning: magnetostrictive, reed chain, guided wave radar, and using pressure sensors (single sensor for hydrostatic pressure in open tanks and two sensors for differential pressure in closed tanks). iId like to see some examples (even without brand names), reflecting how the common characteristics of different types of sensors are compared to each other (e.g. accuracy), and in whaat use cases you'd want to pick one vs. the other. I'd be especially interested in what can be used in battery-powered IIoT applications, i.e. to compare the power consumption characteristics, initialization time and time it takes to perform the measurement.

[@realpars]

Yes, these are all excellent ways of measuring level. Guided wave radar is gaining in popularity because of its ability to overcome issues like foaming, and it is also very good for detecting interface levels. It is a wetted-type sensor, so materials of construction are important. Also, for tall tanks, it may require a clevis piece be installed in the bottom of the tank to avoid sway and impacting internals, such as agitators. Magnetorestrictive is very popular in oil/gas applications, especially for level gauge applications. Differential Pressure is by far the most-used method due to its low cost, relative ease of installation, and accuracy. And as you indicated, capacitance level measurement is excellent for continuous level measurement, especially for viscous and sticky materials.

[@AliAli-b2s1j]

ثف

[@AliAli-b2s1j]

قليلا في ٣فبراير قراءة فنون ٤٧٥فبراير حوادث السيارات رياضة ولاعبين الافلام العربية ٥٥في الافلام العربى ١

[@AliAli-b2s1j]

​@@realpars ج

[@flow5718]

VW and Audis use a potentiometer to measure the fuel level.The voltage output of the sensor changes as the float (potentiometer arm) goes up and down.

[@abdessamadhajji3367]

You can also use pressure sensors to measure level of a tank

[@EngASax]

yeah, that's very fairly common.

[@alikhanzulkashov4438]

You are probably talking about differential pressure transmitter

[@simoessmithlimakevan1803]

It isn't a differential pressure, he talk about a static pressure where the measurement is P= volumic mass of the fluid(rho)*g* h so, livel is : h= P/rho*g

[@harshitsrivastava7700]

Differential Pressure Transmitter

[@djiokmt2200]

Hi, Can you show me please, how I can program this pressure sensor

[@НикитаСоловянчик-т5ц]

Appreciate what you do. Very interesting and helpful for students from Belarus!

[@realpars]

Great to hear that! Thanks for sharing your support.

[@darbarisid]

Very nice video.. I was confused about capacitive type.. was thinking it can be continuous but was shown as point type.. but one of the comments cleared my doubt that it can be used as both..

[@realpars]

Happy to hear that the comment section is helpful as well! Great students are leaving insightful comments all the time. Happy learning!

[@pcrb2695]

Dear Realpars Team, Could you please create an video on practical math behind each type of measurement? Eg., Capacitance type works on C = (epsilon*A) / d (correct me if im wrong) like wise kindly explain all of the measurement techniques. when we map instrument self calculation against with the theoretical formula which will help us in the real world where the error is lying whether its with instrument or in the control loop etc., Suppose the way we do calculation(to find unknown temperature from a known resistance measured from multimeter eg., measured resistance at RTD as 115 ohms; Temp Coefficient = 0.00385; R0=100) for RTD like Rt= R0(1+alpha*t) ; if i simplify this equation we will get approx.t = 38.9 degC which will give us quick conclusion without seeing any standard table etc.,where actually the problem is. Kindly do the needful Best Regards, PC Raju

[@realpars]

Thanks for the topic suggestion, Raju! I will definitely go ahead and forward this to our creator team. Happy learning!

[@macmos1]

Also, this is a fantastic channel-- extremely relevant in my job.

[@realpars]

Thanks for sharing your positive feedback with us, Marco!

[@nocoselelomaqoboza2351]

instrumentation ?

[@waymamma]

Love your videos, they are very informative. Thank you! You mentioned capacitance sensors fall under the point-level category, but technically they are capable of continuous level measurement as well. The Siemens SITRANS LC300 for example does continuous level measurement. Small point (pun intended) but worth mentioning :)

[@realpars]

Richard, thank you for your comment. Yes, there are capacitance level sensors designed for continuous level measurement as well. These sensors work on the principle of inverse frequency shifting capacitance detection, and they provide excellent level measurement for a wide range of liquids. Again, thanks for the feedback!

[@waymamma]

Thanks for the reply. I work in R&D for one of the industry leaders in level measurement, though we don’t do Capacitance here in my lab any longer we focus on ranging technologies (ultrasonic and radar). I’ve seen some of the math used in the continuous capacitance transmitters and it’s indeed quite complex, though possible even with 8-bit MCUs which is pretty cool. Keep up the fantastic work!

[@saskiavanhoutert3190]

Thanks for the explanation, now I know what can be used in tanks etc.

[@realpars]

You are very welcome, Saskia! Happy learning!

[@balajim8946]

Capacitance Level sensor that you showed is continuous type

[@josepheastman8509]

Discreet step, but probably not not just high or low right?

[@braakabbany711]

No there are the two mode

[@suriasaran5050]

Nice explanation.. From India....

[@realpars]

Great to hear that, Suria! Happy learning!

[@brd8764]

A sensor is a sensing device which senses information which is as a variable value for some reason for which it is required to be used in automation systems.

[@chituantran5794]

I would like to state that why do I not find out this channel soon. Thanks admin this channeel, enjoyable. 🥰🥰🥰

[@realpars]

Glad you enjoy it!

[@melquiadesdelgadoramirez680]

I would add very well explained videos. However, you didn't mention Gamma Radioactive-based Level Sensors, used for both Continuous and Point Level Measurement of liquids, solids and slurries. With no moving parts and non-invasive elements is a good alternative for level measurement in huge recipients.

[@realpars]

Yes, nuclear level gauges (gamma gauges) are very useful for tanks that store very corrosive or hazardous chemicals because these gauges do not contact the fluid. However, they are very expensive to purchase and in many countries (like the US), special training is required of the instrument technicians and special reporting is required for moving or replacing the nuclear sources. These types of level sensors are heavily used in the oil and refining industries.

[@chunkyjungle]

As mentioned below there are other types but one that is not mentioned is laser level transmitters. They are continuous and compete with thru air radar and ultrasonic. Mainly used for solids applications but can measure liquids even clear liquids. The downside is that they are an optical device so the lens has to stay clean. There are accessories to help overcome these challenges though i.e. dust tubes, purge rings, built in heater for the lens, etc...

[@realpars]

Great comment! Thanks for sharing your knowledge with us!

[@enriqueramirez8618]

Excellent video, an easy way of explaining the variety of sensor. I decided to subscribe to your courses and I hope to improve my abilities in programming.

[@realpars]

Great to hear that, Enrique! Welcome to the RealPars family!

[@justengineering7602]

Thank you for making this informative video. very useful video for students doing industrial automation. All types of level sensors are explained very well expect free space radar, guided wave radar, capacitance, gamma pressure sensors that comes under continuous level measurement. Keep posting such videos.

[@realpars]

Glad it was helpful!

[@martinmukangwa5050]

I like realpars videos...its an educative channel

[@realpars]

Happy to hear that, Martin!

[@jfraunity7925]

Thanks for your very clear lectures.

[@realpars]

You're very welcome, Zahir!

[@akhileshgupta8849]

informative for interview preparation. thanks

[@realpars]

Thanks a lot!

[@nguyenthanhlong8205]

such a useful knowledge for Automation field, from VietNam

[@realpars]

Great to hear that! Thanks for sharing that with us.

[@ibrahimalabyed2576]

Best channel on youtube

[@realpars]

Thanks for your support, Ibrahim!

[@oluwatoyinkehinde5375]

Nice and easy

[@realpars]

Glad to hear that!

[@allamasadi7970]

I can imagine a fictional character like Tony Stark watching these videos to educate himself, great video and great channel.

[@realpars]

Thanks for your support!

[@AluwaniRalineba]

Thank you for such an awesome informative video. I would like to know how effective are continuous sensors in measurements where there is a lot of turbulence?

[@realpars]

Thanks for your support, Aluwani! That makes for a great topic suggestion, I will happily forward that to our course developers. Hopefully, this is a topic we can focus on in the future. Thank you!

[@cristianocarvalho2106]

It is a good video, but I think it would be important talnk about pressure sensores for measuring liquid levels.

[@realpars]

Thanks for your comment and feedback, Cristiano!

[@brianshelley88]

For smaller tanks ie

[@sufiomargasanov3952]

Why have you forgotten about the pressure level sensor, one of the best, and also want to add to the capacitance sensor - huge problems due to foam , I don't recommend it at the food industry

[@jimbass924]

Excellent video, informative, challenging and great summary

[@realpars]

Thanks a lot, Jim!

[@circulasbutton409]

Great explanation!, although im having trouble to identify the type of sensors for my aboveground fuel tanks... do you mind recommending me which type is the best for detecting petroleum and diesels??

[@realpars]

Thank you for reaching out with your question. While we'd love to assist you in finding the right sensor for your application, it's important to consider the specific engineering requirements of your controller and electrical system, as well as any local electrical safety codes that may apply in your area. To ensure you receive the most accurate recommendation, we suggest reaching out to your engineering group or a local vendor specializing in these sensors. Additionally, here's a link to an international company that may offer products suitable for your needs, which you can review at your convenience. www.emerson.com/en-us/automation/rosemount

[@ElectricityAndEnergy]

very useful explanation , Great Graphics 👌👌👌

[@realpars]

Great to hear that! Thanks a lot.

[@weizhang3513]

Our company is mainly engaged in liquid level sensor products. If you are interested, please go to our company's official website to check relevant products. Web:www.level-measure.com E-mail:[e-mail] Call:15896421004

[@TheCommonSenseProfessor]

First off, great video as always. I am curious why you list capacitance level probes as point level measurement and small? Thank you again, your videos are always a great tool for my classes.

[@realpars]

Capacitance level sensors come in two basic configurations. The types used for point-level detection are usually compact, similar to a tuning fork type sensor. Capacitance sensors used for analog level measurement are typically much larger (longer) and installed from the top of the tank or vessel.

[@MrDawen1997]

Best channel on youtube ! ps: could you do a video about structure text programming in TIA portal?

[@realpars]

Hey! Thanks for sharing your suggestion with us! I have sent this over to our course developers. Happy learning!

[@roger72715]

Excellent presentation. Great channel.

[@realpars]

Thank you, Rondeep!

[@PRNadh]

Greatly helpful in daily life.

[@realpars]

That's great to hear! Keep up the good work!

[@Automation_workshop]

Very precise video on LTs 👍 kindly make a video if possible on "pull rope type LT", how to perform maintainance and calibration.

[@realpars]

Hi Kashu, Thanks for the topic suggestion, I will definitely go ahead and forward this to our creator team. Happy learning!

[@sajid4upn]

Excellent explantation

[@realpars]

Glad you liked it

[@WayneRiesterer]

Fantastic videos as always. Thanks :)

[@realpars]

Thank you very much!

[@creativeeee]

nice and so informative video

[@sushilgharat2264]

Great video for learner's like me.. Thanq RP.. 😃

[@realpars]

Happy to help!

[@tempegoreng2345]

Hy, i really like the video And i have something to ask for What is exactly the difference between ultrasonic and radar sensors?

[@realpars]

Hi Agra, Thanks for your comment and great question! This would make for an interesting video course, I will go ahead and forward this to our course developers for possible future video courses. Thanks for sharing and happy learning!

[@mujeebahmadkhan9996]

Found your channel to be really helpful to me. Thanks a lot for sharing with us. Your new subscriber.

[@realpars]

Awesome, thank you!

[@techs5384]

It’s so good to see these videos, not the drunken live streams. Keep to the format

[@realpars]

Thank you!

[@ashikazarudeen508]

Your contents are very awesome & helpful. Could you please put a video about the initial configuration of radar & Ultrasonic level transmitters

[@realpars]

Hi Ashik! Thanks for your comment and your suggestion. I will pass this on to our course developers! Thanks for sharing and happy learning!

[@P.J16]

1:15 capacitive could be a continuous level indication sensor, although exist also point level

[@pranitadalvi2409]

This was fabulous ..🤘 Please make a video on Pressure measurement units

[@realpars]

Hi Pranita, thanks for your support and for the topic suggestion, I will definitely go ahead and forward this to our creator team. Happy learning!

[@dennismuralles6729]

Could you please, talk about diferents between NPN and PNP inputs/outputs againts relays outputs in a PLC. thanks you

[@realpars]

Hi Dennis, thanks for the topic suggestion, I will definitely go ahead and forward this to our creator team. Happy learning!

[@dennismuralles6729]

@@realpars you guys are the best 3 years later im still learning from you. thumbs up.

[@cck0728]

Excellent video. Pressure gauges can also be used as level gauges....Isn't it?

[@iDrunkky]

It is rather called gauge glass or glass indicator

[@sjholmesbrown]

Indeed, hydrostatic level sensors use the pressure of a column of liquid to determine depth and thus level. Capacitive level sensors can also be continuous, they use a long rod suspended into the medium

[@cck0728]

@@iDrunkky No it's not like this. It's a different story.

[@darbarisid]

@@sjholmesbrown thanks it helped.. I was confused about capacitive type.. was thinking it can be continuous but was shown as point type..

[@solutionsgalore1760]

great teaching...learnt a lot

[@realpars]

Great to hear that, Dennis! Happy learning!

[@amrouche.abdesselam]

I didnt't regret by pushing the subscribed and the notifications button Great video RealPars!! Could you please do a video about As-Interface ?

[@realpars]

Great to hear that, Amrouche! Thanks for the topic suggestion, I will definitely go ahead and forward this to our creator team. Happy learning!

[@hyacinthtatang4427]

Thank you sir. The information is very useful.

[@realpars]

You are very welcome, Founui!

[@aniketkamble3236]

Very informative, thanks!

[@realpars]

Our pleasure, Aniket!

[@neverbethesame-j4k]

What is the most suitable sensor for detecting the level of food in a container, such as pet feed? Also, is it possible to use this sensor with an Arduino? I really needed it for my capstone project.

[@realpars]

Thank you for your question! You can use sensors like the HC-SR04 ultrasonic sensor, which is commonly used with Arduino, to detect the level of food. Happy learning

[@manojjp8988]

Great application of modern day science, but will the continuous level be acid resistant? What is the MOC of the these level sensors.

[@realpars]

There are many types of acids, so there is not one universal answer to your question. However, Hastelloy C is often a good choice for acid chlorides. Telfon-coated sensors are generally good for all acidic service, but not all manufacturers have Teflon-coating as an option.

[@suhaibsamanige549]

Grear explanation. I love it

[@ahmedsafwat2373]

very helpful explanation great effort from you guys thanks

[@realpars]

Great to hear that, Ahmed!

[@arwilljoshpolinag8565]

What is most suitable sensor for detecting the level of a fuel tank? Also, is it possible to use this sensor with Arduino or ESP32? Its for my thesis. Thank you

[@realpars]

Thank you for your question. I'm sorry, but I cannot recommend a specific fuel tank sensor as the best choice depends on various factors, including your application, power voltage, and load requirements. If you're looking for a sensor for the automotive industry, you have many options, typically float-type sensors operating at 12 VDC. While it is possible to power these sensors from your computer, you would likely need an interface to manage the voltage and current requirements. This can be done using relay logic, among other methods. Happy learning! If you have more questions, feel free to ask.

[@shanmugamn2016]

Good explanation 👌👌👍.. Thank you 😊❤️

[@tinashechigu9839]

What about a level probe which consists of a float moving up and down a certain bar which seem to be conductive mainly used for continuous measurement

[@hosseinvaziridoghozlu1183]

Comprehensive and excellent

[@realpars]

Thanks for your support, Hossein!

[@iDrunkky]

There are more ways like DP measrument method displacemnt method

[@RixtronixLAB]

Nice video, keep it up, thank you :)

[@realpars]

Thanks for watching!

[@sadiqabubakar5339]

Thanks for this Great video!! Can I use the ultrasonic radar to check the level of my gas cylinder?

[@realpars]

A gas cylinder may or may not have a liquid phase. If it is does, it is possible, but not recommended to use ultrasonic for the level. The liquid and gas phase above the liquid are in equilibrium, and as the cylinder is used, the pressure of the gas changes, causing a change in density. This change alters the sound wave reflection time, and false readings would be given without a fairly complex pressure-compensation calculation. It can be done, but gas cylinder level is best detected by pressure or load cell (scale).

[@mrhuy5204]

An useful video and thanks for sharing :)

[@realpars]

Glad it was helpful! Our pleasure!

[@waseemlucky7331]

Excellent job sir ..... awesome ........ superb .... amazing

[@realpars]

Thanks for your support, Waseem! Happy learning!

[@waseemlucky7331]

@@realpars My pleasure Sir ....

[@sebastiannielsen]

Also, you are a bit wrong about microwave and ultrasonic sensors requiring "no calibration". All level sensors except for certain point sensors, need calibration, because else the sensor cannot know the shape of the tank. Even if the tank has a continious size, the sensor must atleast know the diameter of the tank. Imagine if the tank were to be upside down cone-shaped to aid in product removal at the bottom. This would of course mean that 1ft of product in the bottom of the tank, is not as much as 1ft of product in the top of tank. Thats why calibration is neccessary, to tell the system how the tank looks like, and thus being able to sense how much product (in liters) there is in the tank. A calibration routine can look like that it asks to fill the tank with X liters of product, push a button, then fill the tank with X liters of product again, push a button etc until finished. It will then record a curve over how the change in ft relates to change in liters. However, when a sensor is used to only detect "tank is empty" or "tank is full" to signal to prevent dry-run or overfilling, then calibration is not neccessary for microwave/ultrasonic sensors. But you are right that these sensors doesn't require re-calibration at regular intervals. Once set up, they are set up for good.

[@sebastiannielsen]

​@Theo Gavoille Thats exactly what calibration is about - how a signal from a for example scale, level sensor, distance sensor, light sensor etc is intepreted and maps to real world values, for example volume, light level, distance in meters etc. Some sensors however drift with time, for example if they become dirty or simply components wearing out with time, thus requiring regular recalibration. Some sensors do not require recalibration at regular intervals, but all sensors require some sort of setup, kind of "initial calibration" to make it fit for the enviroment it being used. Except for certain level sensors which only use their mechanical position to decide what for level or volume to measure.

[@Patil_pritam]

Thank you so much sir

[@k50159]

Awesome tutorial. Thanks a lot

[@realpars]

Thanks for your support, Sharifski!

[@sameersalem1827]

Great work thank you very much.

[@realpars]

You are very welcome, Sameer!

[@sameersalem1827]

💐

[@UHTMK3579]

One more sensor with rotating blades which is commonly used in foundry

[@MGil-b1e]

Hi just wanna ask if do you have any recommend device to identify the weight of mixed powder in the hopper with open at the bottom, thank you so much.

[@realpars]

Hi there, Thank you for your question. Unfortunately, I can’t make any recommendations, as I don’t fully know your process. However, here are two companies that might be able to help with your question, and they also have information for your review. You can also google the for-weight sensing scales. Happy learning! www.omega.com/en-us/ www.keyence.com/products/

[@malxruxes6704]

Hi, i am currently researching sensors - for the purpose of checking high/low values in water tanks stationed at peoples homes. From this video a conductivity sensor seems appropriate as i wish to do as little damage as possible to the water tank, and it needs to be cost efficient. Do you have any thoughts, and are there any research material you would recommend?

[@realpars]

For this application, either a capacitance probe or a Hall effect sensor would likely be a good fit. Residential water tanks are constructed out of metal or plastic, and depending on the application, may be outfitted with varying degrees of insulated jacketing. You will need to do some “on-the-ground” testing to see which sensors work best. The good news is that these sensors are fairly inexpensive (

[@4edt]

Sir I need help to choose the proper sensor to calculate water level with range 0-3mm, thanks

[@MinYeZaw2021]

We have been searching oil level sensor at the bottom of methanol tank. The system contains a few parts where methanol liquid comes in contact with sealing oil. Since methanol is highly inflammable, corrosive, and toxic to human, I am having trouble what kind of oil level sensor to install to the tank. I would appreciate some advice.

[@najeebkhanswat]

Thank you for the lesson

[@realpars]

You are very welcome, Najeebullah!

[@tullgutten]

You forgot an continuous level sensor mostly everyone have. In the fuel tank of cars it is a resistive continuous level sensor that uses a float and a potensiometer as a voltage divider

[@realpars]

Thank you for your comment. Our focus is mainly on industrial processes, but the gas tank level is a very common use of the same principles of level measurement used in industry. Thank you for pointing this out!

[@simedward0903]

Ultrasonic level transmitter liquid vapor can cause an overestimate of the level in the pond?

[@realpars]

It could. Substantial liquid vapor can "muddle" the reflected signal and cause error in the measurement. This can be mostly overcome by calibrating the sensor under normal operating conditions, including the head space environmental conditions. Use of ultrasonic sensors with a normal amount of liquid vapor (well below the saturation point) should not pose a problem.

[@wowvideos920]

Great material.

[@realpars]

Thank you!

[@labhsingh1615]

Thanks you sir for this video

[@realpars]

You are very welcome, Labh, thanks for your comment!

[@alinamelz2529]

hello, thanks a lot for your explanations. can you do a video about trap steam, types, how they work and effective places to install.

[@realpars]

Hey Alina! Thanks for your comment and your suggestion. I will pass this on to our course developers! Thanks for sharing and happy learning!

[@shahariarhassan9270]

Capacitive level sensors are continuous level sensors, aren't they?

[@HariKumar-um4rh]

Can u make a detailed video for logo plc and its programming.....

[@realpars]

Hi Hari, Thanks for the topic suggestion, I will definitely go ahead and forward this to our creator team. Happy learning!

[@tanbirulquadirchoudhury4818]

Can a capacitance sensor be a (used as ) continous level sensor?

[@realpars]

Yes. There are many manufacturers and models of continuous capacitance level sensors. Just make sure you buy the correct transmitter for your application. A capacitance point level sensor typically cannot be used for continuous level without a change of electronics. You can use a continuous level transmitter as a point level sensor by defining an alarm contact at the desired level.

[@loudabarca8676]

thank you🤩🤩🤩🤩

[@realpars]

You’re very welcome!

[@ANILKumar-jf8tk]

Sir please explain VFD internal circuit how to firing igbt working and how set firing angle ???

[@realpars]

I am going to refer to to this link for a very direct explanation: www.vfds.com/blog/switching-it-up-igbt.

[@benitadagatan6095]

Thank you for this lesson. Would you mind to put symbols on the side?

[@jishadus5683]

We need a level sensor like float switch that measure high level of tank . We are using resin in the tank and need a siren sound system that work at tank max. Level . Which sensor is the best and how it’s use?

[@weizhang3513]

Our company is mainly engaged in liquid level sensor products. If you are interested, please go to our company's official website to check relevant products. Web:www.level-measure.com E-mail:[e-mail] Call:15896421004

[@MrSidra2009]

Awesome thank you

[@realpars]

You are very welcome!

[@hyderali1471]

Conductivity 👍

[@jmsantos2586]

What type of level sensor will you use for a Diesel Generator with a skid base tank?

[@realpars]

The main sensor technologies used to measure diesel fuel level are differential pressure sensors, capacitive level probes, ultrasonic sensors and radar sensors, especially guided wave radar. From experience, I have had the best results with capacitive and guided wave radar level sensors with diesel fuel tanks.

[@jmsantos2586]

@@realpars Thank you for the response. The harder part is the installation since the skid tank has low depth. Example: 25kVA Diesel Engine Generator on a skid base tank. Do you have a specific model or brand of capacitive level probes to recommend?

[@nurarif8954]

Thank U

[@realpars]

You're welcome!

[@bunnandjenn9405]

Thanks

[@realpars]

You are very welcome, Bunnath!

[@micki312]

Which continuous level can see the different level of oil/water in the same tank?

[@realpars]

The best method is guided wave radar (GWR). Capacitance-type probes and dual-float level sensors are all good choices. However, GWR is the easiest to setup and maintain, and I feel provides the most stable and reliable reading over time.

[@cssjourney4234]

i have recently installed vibrating tuning fork type level switch on oil circulation line. And problem is that switch is continously vibrating and acting lke there is no fluid present in line. my question is what would be the cause of this type of behavior?

[@realpars]

Thank you for reaching out. It's essential to consider the application when selecting a sensor, as we discussed in our video on this topic. Understanding what type of sensor was previously used on the circulation line and what its purpose was can provide valuable insights. Engineering calculations and careful design are necessary to ensure the new sensor is well-suited to the application's requirements. I've included a link for your reference, which provides further information on this type of sensor. Feel free to explore it at your convenience. assets.new.siemens.com/siemens/assets/api/uuid:bc2c544a-9ac7-48f9-8ed3-bc71cf66157e/PIBR-L10276-0722-Level-Guide.pdf

[@OoiPaul]

There is also gas level sensor

[@rixpanapasa8977]

awesome stuff..thanks for sharing 👍

[@realpars]

Thank you! Happy learning!

[@youthclubindia7147]

Thank you

[@realpars]

You are welcome, Mohammad!

[@mahmoodqasim6236]

3 words. I love you.

[@realpars]

Thank you, Mahmood!