What is a Power Commander?

If you're ready to bolt on aftermarket exhaust systems, take a look at fuel management. A Dynojet Power Commander could be just the missing gap your bike needs. bit.ly/1lQ2Cgz

[@dboibom]

Does it come with A Map already on it I put one on now do I need to run it on the dyno

[@fishyvishy]

hiii ihave fz6 2008 naked iwant to install the power commander on it but ihave some confusion that in my bike there are stock exhaust system so the power comander work and what kind of difference between stock bike an after power commander

[@dekic13236]

I have Yamaha R1 2004 and I have installed PC3 and I want to load map M411-511 that matches my configuration ( Leo Vince full exhaust with KN air filter). My question is this, does this map eliminates setting ( exhaust gas volume ) that can be accessed thru bikes gauge?

[@FatimaHassan-fn1vk]

Fatima Hassan So it doesnt work with engine coolant sensors , O2 sensors and doesnt even give spark timing adjustments?

[@JacobRidesBikes]

I have a 2020klx300r what power commander should I get

[@footsmakenzyhellothr]

I have a 2018 Honda CBR650F. The carburetor trumpets are restricted on this model so if unrestricted, does the power commander have the option for this mod?

[@petermoygannon698]

my bmw s1000rr 18 model is a bit jerky under 4thousand revs in traffic going slow will it help that thanks.

[@cutelovertami91]

can we install on suzuki dr 250

[@ftksalazar2862]

Friend, a question about the CFKMOTO NK250, is that engine carried by another motorcycle model or another brand, for example Honda or Kawasaki? I have an NK250 and I want to know in case I ever have to buy spare parts for the internal part of the engine. I want to know what scanner, brand and model they recommend me to buy and be able to test the CFMOTO brand and also if by chance they know the brand and model of any programmable motor control unit to install it on my NK250. I would appreciate the information.

[@michaelwebb8788]

Thanks for the informative video! I bought an '03 VTX 1800 from my brother-in-law that he bought new and had the dealership install V&H long shot pipes and a PC on at time of purchase. So my first question is, which PC model do I probably have? It has 3 dials across the face of it marked low, medium and high. I just finally bought an after market high flow intake and intend to install it myself when it comes a week from now. My second question is, will I need to make adjustments to the PC after installing the new intake or might it be fine where it is already set to? 3rd question, if I do need to make adjustments to the PC after the intake install, how will I know for sure? and lastly... How will I know exactly where to re-adjust the PC settings to when doing so? Sorry, I know this is a lot to lay on you all at once but I hate to mess up a good thing because my bike already runs and sounds great.

[@ElProfeMoto]

Is it absolutely necessary to have a PC if a put a high flow air filter and a aftermarket exhaust?

[@DennisKirk]

A PC will allow you to make more precise adjustments to the fuel and air intake giving you better performance from your machine. Hope this helps! Thanks! -Phoenixx

[@LaoEggroll]

Question.. I was given a Yoshimura RS-5 exhaust for a cbr1000. I currently own a 2011 Ninja 650. Will it be okay if I have the pipe welded onto my header? If yes, will I need a power commander after? Thanks

[@DennisKirk]

I would not recommend this. If something happens where you need to replace something in that area now you have kinda painted yourself in a corner. Also you greatly reduce resale value and yes you would need a power commander as well. I would try to maybe sell the pipe and get one that will correctly fit your bike. If you have any other questions please give us a call @ 800-969-7501. Hope this helps! -Phoenixx

[@dannypots]

Would a power commander make a stock bike run better?

[@sethr74]

if I add a KN filter and a slip on exhaust to a 2017 PGMI CBR500R will a power commander be worth the effort? or is it overkill?

[@sowrkid28]

Seth R worth its worth it itwill smoothen out everything since you have a new air filter, you’ll notice the difference when you do those modifications and ride without the commander vs. when you have the PC5 on the bike with the modifications

[@alhambra792]

i had installed an AR slip on exhaust can on my S1000RR. Do i really need to have a power commander after I have changed the exhaust can?

[@DennisKirk]

You don't have to but you will see some slight gains if you decide to add it... Hope this helps!-Phoenixx

[@andrewmills8194]

beingvable to tune on fly is golden ..and if ypu know whst your doing you dobnotvneed a computer ..i know because i been there and if wasnt for that i would have lost .track time ..honestly i would recomend the 3 at least up to 06-07 ..only from experiance ..people always think newer ..smaller better ..nope!!! cant go wrong with PC3 07 and older..my ppinion tho! Ride Safe✌

[@theresonly1truth138]

hi, what is the difference between this and remapping the ecu?

[@DennisKirk]

A Power Commander is a piggyback system that allows you to go back to your original settings and allows you to change settings for any future additions without having to remap the ecu. Hope this helps if you have any other questions give one of our Tech-Troopers a call @ 800-969-7501. Thanks! -Phoenixx

[@theresonly1truth138]

Dennis Kirk, Inc. thanks.

[@DCH_30]

do power commanders work on carburated engine motorcycles?

[@DennisKirk]

+Domingo Chacon No they will not, carburated engines you would use jets. Hope this helps, Thanks! -Phoenixx

[@multiblade04]

Dennis Kirk, Inc. hey man I just bought a power commander 3. I have a 1999 Yamaha r6 that’s carbureted so it’s not going to work??? Pls someone confirm 😢

[@kingreaperx1]

Can I install this in a small Cc motorcycle lets say a 190cc Honda?

[@DennisKirk]

I wouldn't recommend it. They are usually used for 600+. Your not going to get the results you are hoping for... Hope this helps. Give us a call if you have any other questions. 800-969-7501 Thanks! -Phoenixx

[@yogavnture1]

i think im selling my 2013 ktm 690 enduro .......i cant take it anymore...........i have a leo vince slip on on the bike. worked great at first but then it started to die at stop signs and even when no throttle used at high speeds. starts right up again. but its driving me crazy............will the power commander work for this ? what model and how much work is it?

[@DennisKirk]

A Power Commander should help out this issue. Please follow the link here: www.denniskirk.com/dynojet Then enter your ride. If you have any further questions give us a call at: 800-969-7501 and talk to a Tech Trooper. Hope this Helps! -Phoenixx

[@tasostsag2993]

+10 hp??

[@frankburdodrums8984]

Just buy a faster bike

[@rsattahip]

Pure idiocy to think these people can make a better engine control unit than the motorcycle manufacturer. Waste your money, there's a fool born every minute.

[@CP-kb1du]

Garbage flawed engineered product works horrible .

[@FatimaHassan-fn1vk]

Fatima Hassan So it doesnt work with engine coolant sensors , O2 sensors and doesnt even give spark timing adjustments?