What is ControlNet?

  Рет қаралды 68,145

RealPars

RealPars

Күн бұрын

Пікірлер: 39
@dotex2809
@dotex2809 3 жыл бұрын
Big thumbs up before even see the intro of the video
@realpars
@realpars 3 жыл бұрын
Thanks a lot!
@rameshamarapinni6793
@rameshamarapinni6793 6 жыл бұрын
Thank you for the very helpful videos making every time
@realpars
@realpars 6 жыл бұрын
You are very welcome! Thanks for your positive feedback.
@jhoncaceres7965
@jhoncaceres7965 Жыл бұрын
Gran video, me servio mucho, saludos desde Perú.
@realpars
@realpars Жыл бұрын
Gracias, Jhon!
@faizalraazy91
@faizalraazy91 3 жыл бұрын
Excellent presentation
@praful7789
@praful7789 6 жыл бұрын
Good job 🙏 make more videos for instrumentation engineering
@jimbass924
@jimbass924 3 жыл бұрын
Great video!!!
@BillSmith1900
@BillSmith1900 4 жыл бұрын
What is a good starting video to learn about the basics when it comes to this stuff? Im currently an electrician with goals of learning more automation, but have trouble soaking these videos in. Thanks for all your great videos!
@realpars
@realpars 4 жыл бұрын
Hi Tommy, Thanks for your comment! Great to hear your motivation in regard to learning PLC Programming. If you want to start from the basics, I would recommend starting with the first course in our library and make your way up from there. Our course library is specifically designed in a way where it provides all the tools needed for beginners to evolve into an advanced level through our hands-on courses. Besides, you will have access to our Technical Team - consisting of high ranking engineers with a lifetime of experience - who are here to help you out with any questions you might have along the way! Feel free to browse through our course library to see all the different topics we are covering. bit.ly/30AVJaR Just to let you know, that we also have a free course on PLC Hardware bit.ly/2XnnUrF If you are interested, you will obtain full access to our complete course library (400+ video courses) by subscribing to either our monthly package for €22.12 a month or our yearly package for €159.28,-. I hope this helps- please let me know if you have any other questions, and I'll do my best to assist. Happy learning!
@jianliangge2174
@jianliangge2174 2 жыл бұрын
Great! Thank you.
@realpars
@realpars 2 жыл бұрын
You are very welcome!
@abhishekkamble1074
@abhishekkamble1074 5 жыл бұрын
Nicely explained... Thank you..
@realpars
@realpars 5 жыл бұрын
You are very welcome! Happy learning :)
@basithpp5938
@basithpp5938 6 жыл бұрын
so much helpful.
@realpars
@realpars 6 жыл бұрын
Great to hear! Happy learning.
@broUniqe
@broUniqe 6 жыл бұрын
Thanks🔧
@realpars
@realpars 6 жыл бұрын
You are welcome!
@walidboutouchent5499
@walidboutouchent5499 6 жыл бұрын
I am new working in a factory metso recycling papers and I am engineer in automation and I have a question about the programming of Metso machine . what is the difference between language Function blocks CAD (Metso Automation) And Function blocks Diagram ?!
@realpars
@realpars 6 жыл бұрын
Hello, Generally, the concept of making and using an FB and how it can help us to simplify and make our software more legible is software environment-independent. It means Function Block Programming is developed under a specific standard (IEC 61131-3) and every company has to follow this particular standard to develop their own software. If you had previous experience with Siemens software and programming, FbCAD really resembles the Siemens PCS7 programming environment. Let us know if you had further questions. Thanks
@ardentdfender4116
@ardentdfender4116 5 жыл бұрын
If I have the option to build a Ethernet Industrial network for the plc communication and connecting the nodes, for what good reason why would I ever entertain considering a Control Net Network especially in today’s world. I understand Control Net preceded Ethernet. I’m curios though because while I work for an OEM as a Field Tech and we design, build and deploy huge engineering plant systems with automation I’ve occasionally seen a Control Net design system in the field on a new project I was there for commissioning only few years ago. I thought curiosity and wondered why that project was Control Net when it could of easily been Ethernet. I also couldn’t see why it wasn’t even Ethernet. On the follow up similar project we built as an almost duplicate plant for the same company in same state this system Control was now Ethernet. So, I’m wondering why the Control Net site project was built as Control Net or even what could of been the reason.
@realpars
@realpars 5 жыл бұрын
There is only 1 reason I can think of. ControlNet is deterministic. Ethernet/IP is not. HOWEVER, with modern switches and network management, EtherNet/IP is as close to deterministic as you need to be for most applications. In 8 years of using Ethernet/IP and billions of data transactions, I cannot point to one device or program fault that has been caused by a missed command or status bit.
@ardentdfender4116
@ardentdfender4116 3 жыл бұрын
@@realpars I'm somehow rewatching this again 2+ years later and with more knowledge and experience in between. In so I actually learn more from the video this time around. One question though is what actually makes ControlNet "deterministic"? Is it the actual "Token" that is produced and passed around when it is doing so?
@theodoreroberts3407
@theodoreroberts3407 3 жыл бұрын
Down to it. I don't completely understand what these devices do, but it has caught my attention. I'm trying to design a computer controlled (server) system with 60 switches, two would be in different configurations at a time, at a distance equal or greater than 1,000 meters. Does the devices you have had on KZbin do that or is it capable of doing it? Accuracy, efficiency and cost are factors. Right now, I just need yes or no. Thanks.
@realpars
@realpars 3 жыл бұрын
Assuming you are referring to repeaters, each protocol type (Ethernet, ControlNet, ProfiBus, etc.) has rules concerning the maximum number of repeaters that can be used. For transmission of 1000 meters, I would definitely recommend using repeaters with a fiber optic link between two repeater stations.
@theodoreroberts3407
@theodoreroberts3407 3 жыл бұрын
@@realpars Wow! Fantastic! Besides, why create something new if it already exist?! Thanks. Oh! Do you have any company contacts, you would be willing to share?
@josesaquete4933
@josesaquete4933 4 жыл бұрын
Thank you for this video. Just what I needed
@realpars
@realpars 4 жыл бұрын
Happy to hear that, Jose! You're very welcome!
@youssefdb7164
@youssefdb7164 Жыл бұрын
do you have presentation form ppt ?
@shankarraj2234
@shankarraj2234 4 жыл бұрын
can you put video for OPC
@realpars
@realpars 4 жыл бұрын
Hi Shankar! Thanks for your comment and your suggestion. I will pass this on to our course developers! Thanks for sharing and happy learning!
@waligeymailoobo8651
@waligeymailoobo8651 5 жыл бұрын
Thank U
@realpars
@realpars 5 жыл бұрын
You are very welcome!
@user-hj4pi3xu2p
@user-hj4pi3xu2p 5 жыл бұрын
Should I use controlnet or Ethernet/IP ?
@realpars
@realpars 5 жыл бұрын
ControlNet is deterministic. Ethernet/IP is not. HOWEVER, with modern switches and network management, EtherNet/IP is as close to deterministic as you need to be for most applications. In 8 years of using Ethernet/IP and billions of data transactions, I cannot point to one device or program fault that has been caused by a missed command or status bit. That said, I suggest using Ethernet/IP. The PLC and device interfaces are easy to configure, require only standard CAT5E cabling and network switches, and are inexpensive to manage and maintain.
@user-hj4pi3xu2p
@user-hj4pi3xu2p 5 жыл бұрын
RealPars thanks for the information.. you guys are amazing. Keep it up!
@ArunKumar-sg6jf
@ArunKumar-sg6jf 6 жыл бұрын
make video of ethercat bro
@realpars
@realpars 6 жыл бұрын
Hi Arun, Thanks for the topic suggestion, I will pass it on to our creator team. Happy learning!
What is DeviceNet?
10:17
RealPars
Рет қаралды 215 М.
What is Ethernet/IP?
8:06
RealPars
Рет қаралды 514 М.
人是不能做到吗?#火影忍者 #家人  #佐助
00:20
火影忍者一家
Рет қаралды 20 МЛН
REAL or FAKE? #beatbox #tiktok
01:03
BeatboxJCOP
Рет қаралды 18 МЛН
The evil clown plays a prank on the angel
00:39
超人夫妇
Рет қаралды 53 МЛН
What is EtherCAT?
7:26
RealPars
Рет қаралды 186 М.
Layer 2 vs Layer 3 Switches
6:02
PowerCert Animated Videos
Рет қаралды 888 М.
🤔 Ok, but what IS ControlNet?
25:31
koiboi
Рет қаралды 47 М.
What is EtherNet/IP? from AutomationDirect
5:44
AutomationDirect.com
Рет қаралды 592
ControlNet Revolutionized How We Use AI To Generate Images
8:08
What is Ethernet?
9:11
RealPars
Рет қаралды 2,1 МЛН
Programable Logic Controller Basics Explained - automation engineering
15:11
The Engineering Mindset
Рет қаралды 2,1 МЛН
Computer Buses
17:46
ITFreeTraining
Рет қаралды 72 М.
What is HART Protocol?
17:01
RealPars
Рет қаралды 1 МЛН
What are the Differences between DCS and SCADA?
9:16
RealPars
Рет қаралды 498 М.