What Is Flow Coating A Car ? How To Flow Coat Or Re Clear Your Paint Job - 1987 Chevy Monte Carlo SS

Please watch my latest video here: "Cracked & Faded Taillight Restore & Trim Paint On @LifewiththeIkes 1979 Chevy Malibu Restoration"
• Cracked & Faded Tailli...
-~-
Visit : spraywaycustoms.com/ for New & Used Spray Guns and Parts.
Support Channel : cash.app/$SprayWayCustoms
How To Flow Coat A Car By Re Clearing - 1987 Chevrolet Monte Carlo SS
--------------- Contents Of This Video ---------------
Click Timestamp To Fast-Forward Or Rewind
0:00 - Intro
0:20 - Video Highlights
1:03 - Video Introduction
1:20 - Checking Out The Runs & Imperfections
1:48 - Benefits Of A Flow Coat
2:36 - Going Over The Sandpaper Grits & Blocks
3:22 - Sanding Out The Runs & Drips
4:53 - Tip Of The Day
5:34 - Removing Orange Peel
6:07 - Burying Decals In Clear
8:30 - Block Party Begins
11:30 - After The Block Sanding
12:05 - Removing Sanding Paste
12:35 - Wiping Down With Wax & Grease Remover
13:11 - Shop Talk With @SouthernChevyTv
13:55 - Applying The Flow Coat
19:24 - Results After Flow Coating
21:13 - Flakes In The Dark
21:47 - @SouthernChevyTv Reaction
22:03 - Outro
Candy Painted 1987 Monte Carlo SS G-Body Build Complete Playlist - • 1987 Chevy Monte Carlo...
1987 Chevy Monte Carlo T-Top G-Body Build & 1995 Chevrolet Impala SS Project @Southern Chevy Tv - • 1987 Chevy Monte Carlo...
Bodywork Primer & Paint Tips & Tricks - 87 Chevy Monte Carlo SS G-Body HOW TO PREP A CAR FOR PAINT - • Bodywork Primer & Pain...
How To Repair Rust On A Car Without Welding Or Cutting - Chevy Monte Carlo SS Trunk Jam Rust Repair - • How To Repair Rust On ...
T-Top Rust Repair With Fiberglass Without Welding BODYWORK ON RUSTED / RUSTY ROOF G-Body Monte Carlo - • T-Top Rust Repair With...
How To Do Bodywork On A Car / Dent Repair / Primer / Prep For Painting A Car At Home MONTE CARLO SS - • How To Do Bodywork On ...
Spraying A Custom Candy Apple Fire Red With Metal Flake - MONTE CARLO SS - How To Spray Kandy Paint - • Spraying A Custom Cand...
Painting Candy Apple Fire Red Over Silver Micro Metal Flake - MONTE CARLO SS - Spraying Door Jambs - • Painting Candy Apple F...
Custom Candy Apple Fire Red Over Silver Micro Metal Flake CHEVY MONTE CARLO T-TOP Painting The Jambs - • Custom Candy Apple Fir...
How To Paint Engine Bay Without Removing Engine From Car Or Truck CANDY APPLE RED MONTE CARLO SS - • How To Paint Engine Ba...
How To Wet Sand Primer & Prep A Car For Paint LEARN AUTO BODY & PAINT FROM TRADE SCHOOL OR KZbin ? - • How To Wet Sand Primer...
How To Paint A Car At Home STEP BY STEP Candy Apple Red Over Metal Flake 1987 CHEVY MONTE CARLO SS - • How To Paint A Car At ...
Chevy Monte Carlo SS Custom Stripe Kit - How To Clear Coat Over Vinyl Decals - Pinstripes - Artwork - • Candy Apple Red Monte ...
#SprayWayCustoms #HowToFlowCoatACar #WhatIsAFlowCoat #FlowCoatingACar #HowToClearOverVinylDecals #HowToClearOverPinstripes #SprayingClearOverVinylDecals #SprayingClearOverPinstripes #CandyPaintedMonteCarloSS #ChevyMonteCarloSS #SSMonteCarlo #GBodyMonteCarlo #CandyAppleFireRed #CandyPaintedMonteCarlo #UreChemFireFlake #UreChemFireRedCandy

[@johngregory4801]

Thanks for doing all these vids. I don't know if I'll ever try to paint my own car, but watching someone who doesn't try to hide imperfections, but shows us that they happen, and how to deal with them, helps me know that I don't have to get it 100% perfect or else. As a mechanic or painter, I'm not a bad woodworker, but I'm slowly learning how to work on my car. Who knows where that will take me?

[@SprayWayCustoms]

Thanks John. In painting you'll be lucky to not have anything go wrong. It's bound to happen

[@wacoldestv1704]

@@SprayWayCustoms Truth !!!!!!

[@chevyboiii6894]

@@SprayWayCustoms your welcome, wish I had you as my hands on teacher

[@jaydegrenade]

@@SprayWayCustoms I wish I could paint a car with no issues like they do on TV. Perfect every time...don't kid yourself.

[@Chasemanuti]

@@SprayWayCustoms trying to get in contact with you

[@paulym5814]

Incredible paint man. That flake just shines like diamonds. This is why we come to this channel. Anything less than perfection is unacceptable. Damn fine job man. Much respect to your hard work.

[@SprayWayCustoms]

Thanks for all the support

[@mikeriverajr4447]

there is no such thing as perfection, especially to someone who does this work for a living, they notice every single little nuance, What i learned from an older gentermen is that perfection is in hand of the beholder, so as long as its perfect to the customer thats what really matters, but to your self the worker if you expect perfection, you will drive your self mad, because it DOES NOT EXIST. . , you have to set a realistic exception of what your quality level is to be, and hold your self to it, side note i tint windows for a livin and while in many ways different many of the same principles apply, prep work, cleanliness and technique is everything!!!!!!!!!!

[@PHARRAWAY]

Beautiful work my friend you killed it

[@SprayWayCustoms]

Thank you Pharraway

[@azmadmonk1]

Thank you both for helping us learn.

[@distinctridesbydavy]

Killer work, but even better explanation of the whole process. We're in a Era were people don't wanna pay for services that are time consuming. Painting a car right ✅ is a big job and the guys doing killer work like yourself deserve every penny and then some!!!

[@SprayWayCustoms]

Thanks Davy...yes it's time consuming

[@vocals4378]

I love everything about how you put so much effort into every job you have done look forward to seeing your own empire of car's

[@SprayWayCustoms]

Thanks like always Vocals

[@kevinfaherty9887]

Thank you for the content. Must say it looks fantastic! When I got a good look and those fantastic stripes,I got a mini flashback of the original "Batmobile". Really good stuff!

[@SprayWayCustoms]

Thanks Kevin

[@ChrisSmith-fp1tw]

Wow! You've done it again. You are a true artist! I wish I could meet you and just shake your hand. I can tell you are a good man! You don't cut corners and you always show your mistakes and how to correct them. Most people don't show there mistakes. You are a class act! Have a good one.

[@SprayWayCustoms]

Thanks Chris. You're support is greatly appreciated

[@keithwilson1909]

Alerts on point!!! Salute homie!!!

[@SprayWayCustoms]

Thanks Keith

[@richardscarlett7942]

Always love watching your Videos. Never really liked a lot of the (to me) loud and obnoxious colors with the my little pony glitter. There is no denying your skill and perfectionism. I try to use my minds eye to imagine what it really looks like without the glitter, but still beautiful work. My man listening to Journey though....rock on man

[@SprayWayCustoms]

Thanks Richard. I appreciate you 🤝

[@tommytech55]

I really enjoy your channel. You are very good at what you do, and you are a very good teacher. Could you let us all know, ballpark how many hours this whole process takes, and what a customer would expect to pay for a high quality body restoration like this? Thanks again for you and your channel.

[@SprayWayCustoms]

Sure can..thanks

[@gregbenwell6173]

I have said it before......but you do some truly amazing work my friend!! It looks so completely insane...great job!!! I love the colors on it as well!!

[@SprayWayCustoms]

Thanks...like always Greg

[@matthurley921]

I came across your videos a couple months ago..just screwing around looking about dashboards…I can see where you may have a few haters that are pro’s with a pro shop..but you’ve got real talent…I actually brag on you and what you do..some impressive work for a backyard paint shop..🤗🤗

[@SprayWayCustoms]

Thanks Matt

[@joehovanec1985]

You can certainly be proud of your paint jobs. Thank you for sharing your knowledge with us. I'm surprised you don't use PPS 2 cup system. Reduce drips and easier clean up. You should also try to filter your incoming air. You do put a lot of work into your paint jobs.

[@SprayWayCustoms]

Thanks Joe. I use the PPS cups sometimes

[@gasmakingboost]

Sprayway dropping that knowledge!!! Only show car quality comes out his garage!

[@SprayWayCustoms]

Thanks for the compliment

[@mopar_shawn939]

That flake pops hard. Your skills are impeccable sir.

[@SprayWayCustoms]

Thanks Shawn

[@tellitlikeitis1067]

You taking it to the next level Spray

[@SprayWayCustoms]

Thanks

[@monopython8487]

True attention to detail . You are a master at your craft. I came across your videos and I feel like you can explain each process step by step for entry level people (like myself) to understand. From base coat; color coat, clear coat, flow coat and orange peel. How to correct stages of imperfection with what materials needed and how to use them . THANK YOU please keep doing what you do I truly cannot wait to invest in the kits need for candy paint . My 93 chevy silverado 1500 is something I would like to transform into showroom qualities like your rides after watching your videos . God Bless from Central Valley California

[@SprayWayCustoms]

My pleasure.... thanks for the support

[@mikeriverajr4447]

your skill in your career shows a degree of long term determination and patience that few in life can wrap there head arround , i tint windows for a living which also requires a whole lot of prep work, patience and determination but what you do is a order magnitudes greater than that tinting.. .. in a weird way im kind of jealous, maybe i should been a painter instead lol. . awesome work man, keep it up!!!!!!!!!!!!!!!!

[@SprayWayCustoms]

Thanks for the big support Mike 🤝

[@mikeburne7581]

You never hide the imperfections, which is great, because we learn how to deal with them. Thank you.

[@SprayWayCustoms]

Thanks Mike

[@bigsquatchsasfoot1964]

Wow dude look at that how beautiful what a fantastic job ,your attention to detail is a credit to you it also shows a very honest man to show a few flaws along the way and how to correct them . Well done bro car looks friggin awesome 👌👍

[@SprayWayCustoms]

Thanks for all he support

[@larrytate5605]

I dont know when i enjoyed watching something as much as i did this, ...watching you spray was fun,..you do it right ! ....I am LOVING that color combo,...glad i found your channel,....thanx from NC

[@SprayWayCustoms]

Thanks for all the support Larry

[@LMason-mi2rd]

Man once again you don't disappoint! That paint job is down right amazing! You truly inspire me to start on some painting projects of my own. Knowing that if there is a mistake it can be fixed. Keep them videos coming my Guy can't wait for the next one!

[@SprayWayCustoms]

Most definitely. I appreciate you

[@joegiron8684]

I have watched all your videos regarding this Monte Carlo and you have chattered my dreams on what I thought was a good painter in my head, you have AMAZING TALENT and wish you all the luck on your next build. P.s. I won't be quiting my day job anytime soon.

[@SprayWayCustoms]

Lol..I appreciate you Joe 🤝

[@gregbenwell6173]

And by the way too.........you listen to some totally soulful music as well.....I really miss my days of spending time in a shop, chillin'!! Notice that in the last couple of videos as well.....just great tunes!!!

[@SprayWayCustoms]

Thanks again Greg

[@saleen308]

Thank you so much for your video's I did my own small paint project with your help and didn't freak out when I got clear coat runs.

[@SprayWayCustoms]

Great..glad to hear that....we all get runs a time or two

[@billarroo1]

Making the car GLOW is the spray man's technique. Great Job !! Great Video. Thanks

[@SprayWayCustoms]

Thanks William

[@chrisdovenbarger4329]

This car has came along way looking good. Your the one who got me into painting thank you for your videos.

[@SprayWayCustoms]

Thanks Chris...good to hear that

[@MrFmccarty]

Through the sheer movement of your hands I see that if everyone decided to do one thing and one thing only thoroughly right, for that period of time you won’t have time to do anything wrong. In one word. AMAZING!

[@SprayWayCustoms]

Thanks for the compliment Floyd

[@marcellemay7721]

Your work is just beautiful. Your cut and buff videos are the best I've seen on you tube. This is custom work, nothing like a production shop. I sure hope that your customers appreciate the work that you do and pay you what it's worth to do it. I just painted my truck in my garage ...it came out pretty good but it needs some cutting and buffing. I laid down 3 coats of clear with the intention of cutting and buffing. I got some trash in the hood but I cut off all the nibs with some 800 and 1500 and I think it's gonna be fine. It always looks worse after it dries and the clear shrinks. the sides came out good very little trash, but some orange peel. Factory like orange peel is acceptable to me but while I'm at it I may as well cut and buff the whole thing. I just wanted say That I'm following your method of cutting and buffing to get my truck. This is a hobby for me but I want that thing to look straight and shiny. It's a big truck, 05 f350 dually ext cab, painted in base coat /clear coat black. It's been a lot of work to bring it this far. Every body does things a little bit different but Your results are killer man. I've got a HF rotary and I just bought the Griots G9 and the small G8 kit just for this project. I'm pobably gonna use the rotary for compounding the large areas and the the G9 and g8 for the smaller areas. Then polish everything with the G9 and G8. How do you like the DA type buffers vs. the rotary?

[@SprayWayCustoms]

Thanks for the story. I still use both rotary and da buffers. It just depends on the situation

[@jmurillo0317]

Great video. I really like how you show your process for spraying each panel. It really helps us noobies trying to learn good technique

[@SprayWayCustoms]

Glad it was helpful!

[@oxyfee6486]

I remember painting a seventy Chevelle, last coat, the damn cup fell off my binks right onto the hood, I damn near cried. If I’m not mistaken the dent from me throwing that cup gun is still in the wall at the place I apprenticed at. Beautiful job my friend, you are a master.

[@SprayWayCustoms]

Thanks David. It seems like that's when all the problems occur is on the last coat

[@mikeleschber1316]

This is my first time watching your videos but, definitely not the last! You are a true craftsman. That is the best candy apple red I have ever seen!

[@SprayWayCustoms]

Thanks...welcome to The Team Mike 🤝

[@MIKEH.777]

Sprayway you got that MC sparkling like a fresh cut diamond. Man you laid that paint job out and them stripes are popping. You always put down perfect paint job my man you definitely deserve the crown to auto body & paint .everyone else is just practicing. They can't hold a candle to what you do. Keep up the fantastic work and God Bless you Sprayway and your family. 🔥💯💪👍👍🙏🙏✌

[@SprayWayCustoms]

Thanks for the great compliment Mike 🤝

[@quitmanwhitsey6320]

Man, you are taking that SS to a whole different level. Better than factory. I enjoyed the video and had to watch it twice.🔥🔥🔥🔥🔥💯💯💯💯💯

[@SprayWayCustoms]

I appreciate that Quitman

[@RyanBassForLife]

Wow this car looked so complicated to paint from the start tho the finish that I should call you a paint 🎨doctor for old rusty cars. All I can say is this paint job most of took you days to complete and your average person could never afford a paint job this good. This was show car quality paint. I would guess this paint job would cost over $12k if you had to pay for this paint job yourself. Love it!! KEEP UP THE UNBELIEVABLE PAINT JOBS💯

[@SprayWayCustoms]

Yes indeed..thanks Ryan

[@deanm4138]

Can’t wait to see that car out in the sun. Mr Sprayway you do amazing work love watching your videos

[@SprayWayCustoms]

Much appreciated Dean M

[@rooftopcustomz7949]

Just did a blue Monte SS but I painted the base put the decals on and painted over that with the pearl then peeled off decals and cleared it…and I gotta listen to some old school jams so I don’t rush and burn thru nothing

[@SprayWayCustoms]

Yes indeed. I've done it that way also 👌

[@jaydegrenade]

That color and striping work perfectly together on your SS. Nice work!

[@SprayWayCustoms]

Thanks Marty

[@DSPAINTWORKZ]

From one painter to another impressive what you do in your garage 👏 and I like how you don't hide nibs and runs you keep it real. As you know even in booth we do everything we can to get clean jobs but crap happens.

[@SprayWayCustoms]

Yes, it never fails..no matter how good you plan

[@seanroane5036]

Nice job Spray!! The Results show from your prep work!! Bro! And amazing your results from a nice basic garage paint booth setup!!

[@SprayWayCustoms]

Thanks Sean

[@UniqueGBodyBuilds]

Thanks fam for keeping me Motivate 💯 I really appreciate it 🤝I will say I will try anything at this point 💪🏾💪🏾

[@SprayWayCustoms]

You got it Gang 💪🏾

[@jasona6222]

Awesome job…I see a lot of people asking how much and how many hours. I would bid this job at my shop @ 30k and hope the customer wouldn’t bite on it. It sounds expensive but after materials and months of labor there’s not much meat on the bone. Spraying candy is pretty much like painting a car 3 times…plus all your jambs take the same process. Keep doing your thing SprayWay.

[@SprayWayCustoms]

Right on…you’re 100% right

[@johnmoore7128]

Power outage while spraying what a game changer !! Excellent job looks great cant wait for next video

[@SprayWayCustoms]

Thanks John...yep, that never happened to me in all these years

[@terrencebailey9030]

Keep up the great work love your videos you truly give inspiration to the diy community!

[@SprayWayCustoms]

Thanks Terrence

[@mikevanin1]

Absolutely magnificent work! You are an inspiration to anyone who appreciates this expertise.

[@SprayWayCustoms]

Thanks Mike

[@pressley8945]

Looks good ugk you got me tired watching you last time I did a overall ten years ago go 66 GTO triple black took me 6 hours to complete you make it look so easy your a good painter much love

[@SprayWayCustoms]

Thanks a lot

[@chevyboiii6894]

Aww man this is hands down my favorite project that you have been working on. I love your work. I wanna be a painter myself one day, cause I love cars and That candy on my dream car is looking real sexy. Thank you for sharing the knowledge.

[@SprayWayCustoms]

Appreciate you Chevy Boiii

[@nissmoguy]

you made the supreme effort to get the perfect finish , dedication to excellence

[@SprayWayCustoms]

Thanks man

[@phantomnus]

Another magnificent work of art

[@SprayWayCustoms]

Thanks Perry

[@kevinliewer8676]

I can't get enough of watching this guy work. Such talent. I will be flow coating my first car this winter in my garage and I really want to pick your brain. Is it OK if I email you with some questions? Keep up the phenomenal work sir.

[@SprayWayCustoms]

Thanks a lot Kevin

[@letmefindout81]

You have a lot of patience and that makes you a real artist.

[@SprayWayCustoms]

Thanks a lot

[@MrNikko4ch]

Excellent work as always, i emailed you about getting some work done

[@montecarloarco5965]

What’s the email so i can get my car sprayed

[@SprayWayCustoms]

Ok then

[@joeyvillarreal7281]

Omg I can never stop watching your videos . You have so much skill hats off to ya man .

[@SprayWayCustoms]

Thanks Joey

[@willland1243]

This was an awesome video, seeing you correct that candy paint was hard work; but seeing the finished car was amazing! Have a Blessed day, brother and keep up the great videos!

[@SprayWayCustoms]

Thanks a lot

[@siliconvalleyengineer5875]

this was an excellnt DIY video, the paint looks stunning

[@SprayWayCustoms]

Thanks a lot

[@kevinfaherty9887]

That's gonna Sparkle and look magnificent in direct sunlight. 🌞

[@SprayWayCustoms]

Thanks Kevin

[@swc-diygarage]

Great video SprayWay. Lots of tech tips. 👍

[@SprayWayCustoms]

Thanks for tuning in SWC

[@timothyrichards9899]

Grade - A ,excellent job Brother. It's good to see more of us in that field. I'm so use to see White and Mexican

[@SprayWayCustoms]

Thanks for the support Timothy

[@georgewilson2443]

Sholl glad you back pimpin!

[@SprayWayCustoms]

Thanks George

[@carloscarloquent1350]

I was telling my customer yesterday I can’t wait to see it in the sun.

[@SprayWayCustoms]

Thanks for staying tuned in

[@MegaWolfman76]

Brother I love watching what you work and seeing all the sweet colors you do.. I wish I knew 20 some year ago what I know now about cars I had 4 choice rides I had a 84 camera f41,86 caprice brougham 81 landau custom Monte Carlo and a 76 couple Deville with a 502 big block. I can't wait till I have a garage I can work in my first real project I plane on will be round a 53 Chevy c-10 candy blue bagged on atleast 24s and ls swapped

[@SprayWayCustoms]

I feel the same way...wish you nothing but the best

[@dcphotosmile]

Yes sir you killed it like always my brother now I’m going to cut with 400 instead of 600 thanks to you

[@SprayWayCustoms]

Thanks man...I do it all the time. As long as you got at least three coats of clear on it and it has sat for awhile and harden up you'll be fine without cutting through fast.

[@calvinlittle8817]

Once again beautiful work my friend .....and I see ya getting down to that MJ it's good to see the man behind the work having a little fun

[@SprayWayCustoms]

Thanks Calvin 😂😂

[@larryjohnson3033]

Sprayway you did it again 👏🏿 🙌🏿 bravo!!!

[@SprayWayCustoms]

Thanks for all the support Larry

[@markd4838]

Hey Spray wow what a job... looks great... Thanks for sharing your techniques with us... M

[@SprayWayCustoms]

Thanks for watching Mark D

[@brandonproctor9028]

Much respect bro, I own a body shop up here 10 miles south of Detroit , turned out real nice man!

[@SprayWayCustoms]

Thanks Brandon

[@davidbretz6345]

Looks great!!!! Skills for sure. First time I saw you paint was rims on here and loved them and then saw you do more than rims ha ha :) Crazy

[@SprayWayCustoms]

Thanks for the support David

[@bfekennels2153]

That mugg sweet af hands down cleanest mc SS ived seen 🔥🙏

[@SprayWayCustoms]

Thanks man

[@jasonedwads8909]

Like your videos I am getting ready to paint my 83 monte carlo ss so I watch your videos to learn how to make look like your job

[@SprayWayCustoms]

Great...wish you nothing but the best Jason

[@donnelljefferson4161]

SprayWay I work in the oil industry (chemicals) the amount of cars you do with the chemicals I would suggest you "always" wear gloves when wiping the cars due to the chemicals able to go through your skin into your blood one day causing you health reasons. Keep up the good work Bro!

[@SprayWayCustoms]

I really appreciate your concern. Thanks

[@familyfirst1st102]

Finally see the genius behind the work!💯💯💯💯 Chicago Westside check-in 🌍..

[@SprayWayCustoms]

Lol...appreciate you

[@woody6750]

wow! that is awesome!!!!!! you are one talented dude!

[@lloydbaker6988]

Great Job Sprayway 👍

[@SprayWayCustoms]

Thanks Lloyd

[@B_Ray573]

Saw that music had you going there for a minute, good sign when the teacher enjoying his job for sure 👍

[@SprayWayCustoms]

Yes it did 😂😂thanks

[@danthompson4879]

Brother Sprayway, Great movie! I'm just a guy that's watches everything you do without saying anything. You are pretty diversified with your music. 3 ol' school albums you should check out. 1. Tommy Bolin- Teaser 2. Tommy Bolin- Private Eyes 3. James Gang- Bang Keep up the good work! You're a helluva good teacher!

[@SprayWayCustoms]

Ok, sure will. Thanks Dan

[@paulseguin1061]

Incredible Job! The flake and candy are really complimented with the colour of the stripe package! Thank you for showing mistakes like runs and how you fixed them! How many hours did it take to wet sand the clear coat before you did the flow coat? I always enjoy your videos!! Thank you again!

[@SprayWayCustoms]

Thanks Paul...I would say two days working off and on

[@user-dz3fo4wl8x]

Sick, nice work man.. I had painted my 87 SS black When I threw the clear on it had cracked for some reason I spoke to a few guys and was told it was most likely because my paint was still wet. I had painted the car while it was raining out and cold so I guess that’s why it didn’t dry well enough. This makes me feel 10x better Going to try to just sand it all down again and hit it with clear again But worst comes to worse Fuckit I’m just paint it all over and do it again the right way Your videos gave me more confidence hahahah

[@SprayWayCustoms]

Sounds like you didn’t let it flash long enough in between coats

[@Mechaniclyfe]

That monte is gonna be a show stoppa nice work sprayway !

[@SprayWayCustoms]

Thanks a lot Overspray

[@swc8136]

Great video. I enjoyed the lesson

[@SprayWayCustoms]

Thanks man

[@UndergroundPaintKing]

Another great video Sprayway the flow coat looks 🔥

[@SprayWayCustoms]

Thanks King 👑

[@MikeGosa]

The GOAT of paint and body

[@SprayWayCustoms]

Thanks King Gosa 👑

[@gallejugon3350]

This paintjob is legendary , you should thake your cars to a showcar or autosalon .

[@SprayWayCustoms]

Thanks Galle

[@The88katana600]

100% legit! One of my favorites to watch here on KZbin always perfection..

[@SprayWayCustoms]

Appreciate the long time support over the years 🤝

[@TheSubieSanctuary]

Sub’d and Watched the whole thing, really well done. Makes me want to start on my old caddy

[@SprayWayCustoms]

Appreciate you

[@bcwilliams6147]

Once again you are making it look easy !!! Thanks for another video.

[@SprayWayCustoms]

My pleasure! BC

[@ralphieralph8781]

Sprayway dropping gems!

[@SprayWayCustoms]

Much appreciated Double R

[@TheCowboysdude]

OMG that is beautiful man!!! WOW..... that's impressive and Thank you for the video!!!!!!!! I live in NY if I were closer to you I'd have you doing my truck....

[@SprayWayCustoms]

Glad you enjoyed it John

[@donaldsimpson9110]

That's really nice love how smooth it looks

[@SprayWayCustoms]

Thanks Donald

[@lanehurley3363]

great how to video the the DIY guy.looks amazing !

[@SprayWayCustoms]

Thanks Lane

[@ellohyou1859]

GOOD WORK SWC. 👍 Always enjoy watching your videos... E&E Engaging and Educational..

[@SprayWayCustoms]

Thanks for the support

[@CakeMonster82]

Damn I didn’t realize this was a new video I’ve been searching thru the channel watching everything I didn’t realize how new the other videos were until I seen this upload I can’t lie I’m hooked homie got me stuck on how he got me watching these fire as videos I’m about to go to my hood page where the followers are heavy this dude finna blow I gotta rep foe my down bottom nukkas and he’s official

[@SprayWayCustoms]

Thanks for the big support....it's greatly appreciated 🤝

[@CakeMonster82]

@@SprayWayCustoms I wanna get some work done on my vehicle how can I get a hold of you?

[@TrueGrittCustoms]

That flow coat came out great sprayway...keep up.the good work bro

[@SprayWayCustoms]

Appreciate the support like always #TGC

[@DWillBGBodyPerformance]

Great explanation on why to flow cut and how. Everytime you spray a car the only thing i hear in my head is candy on chrome by lil flip and big t

[@SprayWayCustoms]

Appreciate you D Will

[@jimchevy4134]

Oh I love ❤ them apples 🍎 very nice can't wait for the final assembly 😊

[@SprayWayCustoms]

Thanks Jim

[@leecarter2768]

Can't wait to see it come together!

[@SprayWayCustoms]

Thanks Lee

[@nate5084]

Beautiful, just beautiful. You really got it going on brother.

[@SprayWayCustoms]

Thanks Nathaniel

[@jasonwright3640]

Awesome video professor sprayway 💯💯💯💯💯💯💯

[@SprayWayCustoms]

Thanks Jason

[@jayDubb05]

Nothing but love bro💪🏾💪🏾♥️💪🏾💪🏾

[@SprayWayCustoms]

Much appreciated

[@georgem5697]

Beautiful another well explained video thank you

[@SprayWayCustoms]

Glad you enjoyed it

[@antoniocrawford4503]

I like the way it came out Sprayway thats a lot of work damn good job

[@SprayWayCustoms]

Thanks Antonio