What is Switch Bounce and How to Debounce - ATM | Digi-Key Electronics

  Рет қаралды 57,747

DigiKey

DigiKey

Күн бұрын

Switch bounce or “ringing” can cause some serious issues with connected circuitry. Logic or digital circuits view this mechanical bounce as the switch being engaged multiple times in very short succession resulting in unreliable input data. Using various external components, switch bounce can be overcome before the signal reaches data collection points. Latch and RC debounce circuits are demonstrated in this video.
Blog - Implementing Hardware Switch Debounce | DigiKey
www.digikey.com/en/articles/h...
Digi-Key’s Blog - TheCircuit www.digikey.com/en/blog
Connect with Digi-Key on Facebook / digikey.electronics
And follow us on Twitter / digikey

Пікірлер: 12
@teckweelow5876
@teckweelow5876 Жыл бұрын
Straight to the point with animation aiding , informative video !
@whitesheatingairappliancer7101
@whitesheatingairappliancer7101 2 жыл бұрын
Older American dryers motor controller relays. One relay would go bad all the time after a year or two of usage. Your video pinpoint what could potentially cause that issue.. nice video
@shervin9561
@shervin9561 7 ай бұрын
Thanks a lot
@nicoy5079
@nicoy5079 5 ай бұрын
thanks!
@TheBadFred
@TheBadFred 2 жыл бұрын
What about a Schmitt-Trigger fror debouncing a switch signal?
@f-s-r
@f-s-r 2 жыл бұрын
That works for small amplitude noise, but switch bounce tipically goes all the way to +V and GND.
@jeremyperala839
@jeremyperala839 2 жыл бұрын
Can't believe there was not even one Tigger hidden anywhere in the video. Boing boing boing.
@msimon6808
@msimon6808 9 ай бұрын
@@jeremyperala839 I have several. Zero Debounce Delay for an SPST switch with an SR Latch. spacetimepro.blogspot.com/2023/09/switch-debouncer.html
@wonderfulworld5134
@wonderfulworld5134 Жыл бұрын
The input to a PLC needs to be debounced. Otherwise a software debounced timer, so a strong 500 milli second input is only what is accepted. They also can consider a hardware debounce electronics also if they have the electronics mind to.
@whippoorwill1124
@whippoorwill1124 Жыл бұрын
SR latches are complicated enough without careless errors. You can't make an SR latch with two AND gates as shown at 1:35.
@msimon6808
@msimon6808 9 ай бұрын
Zero Debounce Delay for an SPST switch with an SR Latch. spacetimepro.blogspot.com/2023/09/switch-debouncer.html
Mom's Unique Approach to Teaching Kids Hygiene #shorts
00:16
Fabiosa Stories
Рет қаралды 38 МЛН
Doing This Instead Of Studying.. 😳
00:12
Jojo Sim
Рет қаралды 20 МЛН
Gym belt !! 😂😂  @kauermotta
00:10
Tibo InShape
Рет қаралды 18 МЛН
6 Horribly Common PCB Design Mistakes
10:40
Predictable Designs
Рет қаралды 185 М.
Eliminating Switch Bounce with a Debounce Circuit
16:49
ForceTronics
Рет қаралды 29 М.
Pull-up and pull-down resistors explained
6:33
Blueprint IoT
Рет қаралды 4,2 М.
Fun with Transistors
24:33
HackMakeMod
Рет қаралды 77 М.
37) Contact Bounce & Mitigation
15:20
AmRad Podcast
Рет қаралды 8 М.
EEVblog #486 - Does Current Flow Through A Capacitor?
17:17
EEVblog
Рет қаралды 431 М.
EEVblog #961 - Monkey Debouncing
20:04
EEVblog
Рет қаралды 82 М.
Tip Of The Day / Switch Contact Debounce Circuit
5:28
0033mer
Рет қаралды 2,9 М.
Что делать если в телефон попала вода?
0:17
Лена Тропоцел
Рет қаралды 3,4 МЛН
تجربة أغرب توصيلة شحن ضد القطع تماما
0:56
صدام العزي
Рет қаралды 64 МЛН
Bluetooth connected successfully 💯💯
0:16
Blue ice Comedy
Рет қаралды 1,6 МЛН
Tag him😳💕 #miniphone #iphone #samsung #smartphone #fy
0:11
Pockify™
Рет қаралды 4,4 МЛН