The Rodfather and Service Expert Drew walk you through a routine, 100 hour service on Suzuki 350 Outboards!
Пікірлер: 63
@reelchaoscharters36054 жыл бұрын
Great video guys. Love to watch the behind the scenes
@floridasaltamerica44403 жыл бұрын
Great information for Novice mechanic like myself like to hear the "why" and "how" behind this kind of process.
@lb7wade5182 жыл бұрын
Great video
@osu32212 жыл бұрын
Good job and sweet ass boat!!!!
@slange4552 жыл бұрын
Never seen lower unit with 2 vents was wondering why you didn’t have it lowered and level during the fill process but now it makes sense
@jimmymiata78552 жыл бұрын
It’s not two vents on the lower. One is a right hand rotation and the other is left hand. Makes everything opposite.
@jasoncooperpcola2 жыл бұрын
The front prop lock washer is a one time use item also.
@alexmichaud61712 жыл бұрын
Depends
@thedandy67652 жыл бұрын
@@alexmichaud6171 on suzuki with genuine suzuki parts its a 1 time use
@osu32212 жыл бұрын
I have the new Calvin Beal 44 that will be ready in April and will be home with me in Costa Rica.
@slynn51382 жыл бұрын
That is a beautiful boat. I’m kinda 50/50 on owning a pilot house and not being out in the open. On the other hand A/C sure is night when it’s 110 degrees outside. Are you going to run a charter business with it?
@christopheranthony76442 жыл бұрын
Very cool 👍🏻
@youmertz2 жыл бұрын
Doesn't wipe the old grease and mineral grime off the splined shaft and reuses cotter pin and locking tabs... With engines that expensive, why not go the extra mile?
@romewasnotbuiltinaday2 жыл бұрын
reminds me of when I watch the guys change my car engine oil and they never let "all" the old oil drain out.
@eafan482 жыл бұрын
Need that new v12 Mercury engine
@chevyon37s2 жыл бұрын
Take a drink every time they say “Ecstar”
@genezehring60572 жыл бұрын
Or AGAIN
@Imwright7202 жыл бұрын
I had a center console for 15 years that got used almost every day. Kept it at the marina so it was super easy, zero trailering. Totally burned out. Seeing this boat actually makes me want to go out for a run. At night. No way those plugs need changing that soon.
@Bischlarbo692 жыл бұрын
What totally burned out? Your drive to go boating?
@Imwright7202 жыл бұрын
@@Bischlarbo69 sold the boat. Lots of opportunity to go boating but always said no. Lost the desire. This boat makes me want to go take a trip.
@Bischlarbo692 жыл бұрын
@@Imwright720 that's how hobbies go for me too. Find a new one. Flying planes is cheaper than you think 🤔
@Imwright7202 жыл бұрын
@@Bischlarbo69 flew remotes for a while. That was a lot of fun. Gave those all away. I’ve got plenty to keep me busy.
@saltwaterscratcher2 жыл бұрын
Great video .. but I’m sure I will never need this information since I can’t afford a boat.
@alanmiller3662 жыл бұрын
reused a cotter key, that is a problem
@alexmichaud61712 жыл бұрын
No it isnt
@nolanohana2 жыл бұрын
Should the motors be trimmed down fully for service and correct oil level?
@alexmichaud61712 жыл бұрын
Won’t matter
@nolanohana2 жыл бұрын
@@alexmichaud6171 why?
@matt024682 жыл бұрын
awesome video. don't get so close to things so the camera has a chance to focus. definitely want a friend that owns a boat and don't want one myself after seeing this. stupid how suzuki specs a semi-synthetic 10w-40 when a full synthetic 10w-40 with the right additive package could probably go 150-200 hours. that oil filter is also tiny.
@NoName-qs6ei2 жыл бұрын
Man wipe that old grease off 😆🤣😂
@captlucky23203 жыл бұрын
Need to get Steve from Richie boats crazy ass on the channel
@tammystrickland46692 жыл бұрын
Reusing old cotter pins?
@chevyon37s2 жыл бұрын
After bending them over with side cutters! 😂
@genezehring60572 жыл бұрын
Monthly payments on the boat stress his cash flow
@rafeone98083 жыл бұрын
Half mill boat hire someone to take care of it while sitting back drinking a few.
@slange4552 жыл бұрын
Lol you would think but If this is a charter boat you need this done on your schedule also I’m sure margins are thin once all bills are paid it’s a high cash flow business lots going out and you hope more comes in at the end of the week.
@night_fishingtrips3 жыл бұрын
Rod get Pete a call he lost his phone in the river
@stuartlang99682 жыл бұрын
A boat that big and only two outboard engines?
@markshark73782 жыл бұрын
If you guys are ever selling this boat, let me know !
@ozzypresident2 жыл бұрын
Causmic - Much Higher
@osu32212 жыл бұрын
I'd be using 20-50
@lewisanth49862 жыл бұрын
Make sure the engine is designed to accommodate for it 1st ! This ain't an old school engine with bearing tolerances big enough to fit a coin haha
@Chris-js1yw2 жыл бұрын
Why is there two probs on each motor
@ericlamesjerant58412 жыл бұрын
contra-rotating props provide more "bite" on the water while still allowing the boat to travel at higher speeds.
@brettalspach66822 жыл бұрын
half a million boat doesn't even change water separators or impellor
@Matthew-ud3nq2 жыл бұрын
That big ass boat only has 2 motors? 🤔
@Mandingo_2 жыл бұрын
Half million dollar fishing boat. That boat better catch me my own fish.
@ryankelly10882 жыл бұрын
Grease on the thrust washer 🤢 vibrationsssssss
@balmoreCruz2 жыл бұрын
How much it cost this service?
@chevyon37s2 жыл бұрын
Roughly $110-130 per engine in oils and filters
@balmoreCruz2 жыл бұрын
@@chevyon37s thank you for reply back your video was very instructive well done
@dski80972 жыл бұрын
That boat is missing two more engines if you think it's worth $500,000 Brother.
@brycenanddad14532 жыл бұрын
Have you ever priced one? Lol
@dski80972 жыл бұрын
@@brycenanddad1453 Ya brand new maybe but not this one.
@brycenanddad14532 жыл бұрын
Guess you haven’t priced em used either. Freeman’s don’t lose value. People are paying more than brand new prices just to get them
@eafan482 жыл бұрын
Not to mention they are trash Suzuki engines
@brycenanddad14532 жыл бұрын
Trash? Lol Zukis are pushing 6k,7k,10k hours every day on watermans boats. Ones that work every day. I worked for Suzuki, saw them every day. They are second to Yamaha for sure but Mercury is the real garbage. Y’all clearly don’t know shit and that was the point of my comment.