Great video !!! Just ordered my 00-3761-0 !!! Can’t wait to install it on my 68 beetle . Go EMPI Go !!! Kept up the great work . Big fan Alex from NJ
@EMPI_Inc Жыл бұрын
thanks Alex!
@ZAKEREE3 ай бұрын
did you install in the end?
@newalex19703 ай бұрын
@@ZAKEREE yes there great
@ZAKEREE3 ай бұрын
@@newalex1970 Can you send me a vid of your exhaust?
@billygoatracer9 ай бұрын
Is al the j tubes the same size Meaning if I buy this can I keep my same j tubes I already have
@useracount8544 Жыл бұрын
What happened to the collector? I mean where is the collector pipe, the four headers merge into a collector but then then ends on the side of that small muffler tube.. no tuned length collector pipe? Let me know, I would love to see a cutaway crosection of that collector / muffler to see whats going on, thanks.
@EMPI_Inc Жыл бұрын
sure no problem we will send the CAD drawing your way.....
@SanDiego_VDubLife2 жыл бұрын
Are these available without the heat risers?
@bertsparrow Жыл бұрын
What am I missing here, both heat riser flanges are attached identically on both sides? This means heat will not transfer from one side to the other. In comparison to my old german one, one side is like those on yours, but the other one feeds down to the actual exhaust, in a low pressure environment thus creating transfer across the manifold. Seems like yours here will have both exhaust pulses competing and with no hi/lo pressure differential will easily clog?
@EMPI_Inc Жыл бұрын
thanks Bert we will share your comments with our Engineering team and share feedback asap
@krusher745 ай бұрын
Same non working design they have had on "performance" headers for years, they try to Wow you will "cad designed" But as you say that design does not have a low and high pressure source to actually make head flow through the riser.
@bertsparrow5 ай бұрын
@@krusher74 Copy, and they never did get back to me "ASAP", because I was at the time, in the market for one.
@sameshirtdiffday4 ай бұрын
you are right, there is a metal gasket you can get that is almost solid, has a like a less than 5mm hole. this creates a pressure differential or something and makes the gas flow from one side to the other.
@shanebrainerd16443 ай бұрын
Will this exhaust work on a 1200cc 40hp?
@EMPI_Inc3 ай бұрын
Hi Shane we will confirm fitment with our Tech team and let you know asap
@EMPI_Inc3 ай бұрын
Hi Shane, sorry the 00-3761-0 exhaust will not fit, please see our p/n 00-3766-0 that will fit empius.com/products/2-tip-gt-exhaust-system/
@shanebrainerd16443 ай бұрын
@@EMPI_Inc Thanks!
@gravityTattdrumr112 жыл бұрын
What size of J tubes is needed?
@matthewdazzo6395 Жыл бұрын
Hi.....will this system allow clearance for a spin on oil pump filter ? Thank You
@martinusoostelbos55579 ай бұрын
Unfortunately it doesn't
@andynorthern61913 күн бұрын
Is there a stainless exhaust like this for a 1200cc
@EMPI_IncКүн бұрын
Hi Andy we will ask our Tech dept for more info and share asap
@EMPI_IncКүн бұрын
Andy, please see this exhaust for your 1200 empius.com/products/2-tip-gt-exhaust-system/
@estapeluo Жыл бұрын
Clearance for EMPI FULL FLOW OIL FILTER PUMPS and/or Mexican Oil filter?
@EMPI_Inc Жыл бұрын
will confirm with our Tech dept and let you know asap!
@EMPI_Inc Жыл бұрын
The 00-3761-0 exhaust will clear the EMPI full flow oil filter pumps
@UDX-59Z2 жыл бұрын
Why does it look like the muffler is not level with the rest of the header? Seems as if the driver's side of the muffler is slightly lower and the passenger side is higher...a slight 5 degree cant to the left as compared to the two top (level?) tubes from cylinders 2 and 4?
@robmullner162 жыл бұрын
probably just the way Im holding it, the muffler is level and the system fits perfectly- even on a beat up bug like our development mule!
@nategio26482 жыл бұрын
@@robmullner16 Tell Empi to make a real SS Polish Exhaust for a real 2332 CC and up for the big boys. We dont need an other copy cat exhaust that already is out there Performance Type Severly Needed Now. A-1 is ridiculous a waitng game as far supply and demand is involved ? LMK ?
@robmullner162 жыл бұрын
Thanks Nate we have many all new CAD designed systems launching this summer please stay tuned and we will release more info including sounds clips and dyno results
@superveganwhat Жыл бұрын
I know what you mean by looking uneven or lopsided but when you bolt it up it does seem to be level
@superveganwhat Жыл бұрын
@@nategio2648 I’ve had 2 inch and five eights one stainless one raw with the stainless muffler the low down one they looked great sounded great but they did not hold up the stainless steel was so thin especially on the muffler constantly cracked I just got this one in the video for a smaller engine on a class 11 style bug haven’t ran it yet but it does seem to be pretty heavy duty