√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
@andysmith92433 жыл бұрын
Just had caliper issue on my 2013 F-150. Getting it replaced now! You made this super easy to understand. I own a landscaping business and would like to be able to do as much work on my vehicles as I can to save money. Thanks a ton for this quality content!
@MacAutoDiag5 жыл бұрын
The editing in this video is magical
@1AAuto5 жыл бұрын
+Keeper Of The Reaper Thanks for checking us out. 1aauto.com
@cb90183 жыл бұрын
My wife’s Altima has been smelling like burnt rubber for some time now. Thanks for the video I will look into her brake system.
@fabiii6802 жыл бұрын
Currently dealing with this also.
@sirsweetness83325 жыл бұрын
You look like a good dad driving that minivan
@1AAuto5 жыл бұрын
+Sir Sweetness Thanks for checking us out. 1aauto.com
@fiddlerpin3 жыл бұрын
The right rear brake was not loosening up on my 2007 Honda Odyssey. Stop and go traffic would heat it up but highway speeds it was ok. I just changed out the caliper and hoses. Works fine now.
@scotteddy99603 жыл бұрын
Wow! It doesn't matter if you didn't find the problem. You just replaced everything that it could have been..lol.
@1AAuto3 жыл бұрын
+Scott Eddy Thanks for the feedback!
@goinbananas76063 жыл бұрын
@@1AAuto I think he means diagnose then replace not replace and figure out if it solved the problem. That’s the difference between a good and bad mechanic, it’s only brakes and I’m not even done the video so no hate. But it’s common for hacks to be part changers
@checkmilu2 жыл бұрын
He did find the problem with the thermo gun that shown the brake was overheated. He could have just cleaned the brake and put some antiseize on the piston, sliding pins and pads but he replaced it as brake parts are quite cheap and it's the most important part, spend extra as preventative measure is a good thing unless you are on A very tight budget.
@Rustic_Farmer2 жыл бұрын
Thats how they make the big dollars 💵
@dennisdevore16485 жыл бұрын
A problem I encountered on my '92 chevy astro was both front hoses were restricting return flow from the calipers, causing them to appear stuck. New hoses solved the prob
@charleshines2142 Жыл бұрын
I am noticing a burning smell like that but I had my brakes done recently. I read that it can also be resins in the pad curing. If that is the case I hope they cure soon. It is not a great smell and its easy to blame large truck for it since some of those trucks do smell bad. Some of the same trucks leave a trail of black smoke and it is not great being in that stuff.
@jennyenlightenmenttarot89204 жыл бұрын
I got new brakes on my 03 Toyota Camry and they are smelling burnt when I drive it ?!???
@rooseveltrainesjr76183 жыл бұрын
Most of the time it's the caliber. Also wheel burn goes bad also. Alot of roaring if it's bad
@sticks29pgm293 жыл бұрын
You ever have a new brake assembly fall of your car? I did 4 or 5 days after I had it installed.
@jm12green314 жыл бұрын
Hey my front drivers side wheel area smells like burning rubber when i come to a stop...any ideas?
@Secretfiles9993 жыл бұрын
Brake pads might be burning up. Check for rubbing or metal on metal
@terryaguilla64033 жыл бұрын
I just got new brake pads a rotor n caliper on my front right side of my 2011 Ford expedition n it has that burning smell to it is it bad to drive it like that
@s.akinribido5894 Жыл бұрын
No way you need to change all those parts out just because they got hot. 😂😂😂
@Eyeballpaul84 Жыл бұрын
Had my caliber changed still smells 😔 what can it be
@kayleelopez64443 жыл бұрын
I changed my break pads and I started driving it for at least 5 to 7 minutes it’s started smoking from the back tire… any ideas what it can be
@1AAuto3 жыл бұрын
+Kaylee Lopez We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@arrepuess3 жыл бұрын
Same here, im going to bleed the old brake fluid to new
@thinkingagain59662 жыл бұрын
@@arrepuess did that help?
@trancextend5 жыл бұрын
Would that cause my break lights to come on if it’s just slightly sticking?
@GalmTeam5 жыл бұрын
No, because the switch that controls the brake lights is usually located near the brake pedal. So the brake lights usually turns on only when you press the brake pedal.
@nickdayzed1893 жыл бұрын
Ko
@codyjohnson56742 жыл бұрын
All good work. Except if had many break jobs of frozen breaks. And honestly never had a bad caliper after being to hot. Seals are molded rubber and withstand extreme heat very well. If it wasn't leaking when you took it off it ain't leaking putting it on. You're trying to sell unnecessary parts. Secondly. The brake cable moved if you would have removed it and used a syringe to put diesel fuel down the inside of cable then blow out with air compressor and the dump a few drops of motor oil in the cable and and move it back and forth a bunch or if it spins I side cable guide put it in a drill chuck and spin for 1 min she will slide like butter. So more money saved. Basically you only know how to bust out money and replace stuff, you dont actually know how to fix and save money.
@6093247370 Жыл бұрын
How much temperature should be good for rotor?
@williamtrinidad20094 жыл бұрын
My brakes are not smoking they just smell very light i changed the roters and the brakes did i possibly do something wrong or is that just the smell or braking in?
@oldbiker97393 жыл бұрын
I never use my park brake , last time I did the rear brakes started smoking .
@themechanic42225 жыл бұрын
Best channel
@1AAuto5 жыл бұрын
+THE MECHANIC Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto
@andrewoliver96865 жыл бұрын
How is the tire spinning faster than the rim?? That always had me puzzled🤔
@dakotasgt4 жыл бұрын
It’s just because it’s going so fast, it looks like it’s going slower
@alfenner3309 Жыл бұрын
So I just put new front brakes (rotors and pads) on my jeep. I noticed the smell when I got home. The brakes weren't dragging when I replaced those parts just squeaked. You thoughts please? Thanks
@Mahkwa2 жыл бұрын
I have 2001 Chevy Silverado 1500 - I replaced the rear rotors and pads and was able to manipulate the caliper piston with a tool, but I am getting some resistance while driving and some smoke from the new pads/rotors. Is it normal for new pads/rotors to smoke?
@jamesmichael85493 жыл бұрын
I have a Toyota Camry LE 2001 2.2 liter 4 cyl engine . When i was driving it today it smells like a burnt rubber . And the brakes kinda smokes to the passenger tire .and i heard kinda grinding noise when i brake .Iam thinking its my brake pads .I have no experience on this kinda issue . I was gonna change my brake pads . Any good info would be appreciated
@1AAuto3 жыл бұрын
+James Michael Thanks for watching! You should apply some of the things we point out in the video to help make that determination. Chances are you are going to have to replace more than just the pads if your brakes were actually smoking!
@breanafoster4557 Жыл бұрын
What about drums
@iamgoat30353 жыл бұрын
Hey 1A Auto, if a 90 minute car ride in 2011 civic had my front brake rotors at 50ish degrees celcius vs 35 centerhub and one rear drum at 37 vs 32 center hub , is it safe to say i have stuck or dragging brakes or warped rotors or something? i changed the front pads about 6 months ago and was supposed to change rear shoes when i changed tires back to summer but forgot. i just changed from winter wheels n tires to summers yesterday and also have a howl that wasnt there last summer, hopefully this goes away after i fix brakes? there was a faint almost constant hum all winter that made me think i had a bearing going, the sound was ESPECIALLY bad this winter when it was very cold and got even WORSE when i backed up in this cold. is this brakes or bearings or what? now if that slight hum is still there its drowned out by this new howl since changing tires...?
@codyjohnson56742 жыл бұрын
You seem to understand the issue at hand so why not just fix it. Its obviously the bearing and breaks both. Once the bearing gets shot at wobbles and will make breaks get a bit hotter from not running perfectly inline with rotor. So get a new rotor and a new bearing and I bet she works like new again. Be sure to check if the pistons and slide pins are clean and move freely.
@jawainrobinson29484 ай бұрын
Phone froze when he hit the camera
@md650002 ай бұрын
So the solution is...replace everything.
@CricketMode2 жыл бұрын
Yeah right charge 1000$$$ for a brake
@ROMANEMPIRE694 жыл бұрын
Ok what if it only happens after you splashed in a deep puddle of gutter water? Wouldn’t that just be the hot brakes reacting to cold water? 🤪
@henrycordova41033 жыл бұрын
Nice
@oldgamer133011 ай бұрын
I have a 2001 Ford Explorer and the brakes seem fine, they are not binding because I can push the car very easily and they feel to work very good, but if I am going down a steep long road the brakes burn and smoke pours of them. Any ideas what could be the problem and could it be just poor quality brake pads as I do not know what brand is in it because I have only had it 6 months. Thanks.
@hihowareyou00003 жыл бұрын
👊🇨🇦
@miguelalfonzo39903 жыл бұрын
What if I just changed the brakes, would I need to replace them again?
@1AAuto3 жыл бұрын
+Miguel Alfonzo We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c