What's "WRONG" with ToneX One...

[@EricMakingWaves]

Pedal companies, amp companies and other digital modeler companies are all in a little trouble. Next thing you know IK is gonna put out a multi-effects-filled ToneX plus.

[@adhaskym.a9536]

Does it have a uni-vibe tone model?

[@LothyBluesCave]

So in toggle mode you can switch between amps AND in on/off mode it can be f. i. a drive pedal? I think that's perfect. You can have it on your board as a direct solution, and when you use your amp you have another drive/boost or something else. Perfect for a backup solution, just a baby bomb in your bag and if your beloved tube amp bites the dust, flip the switch and on with the show.

[@joeljohnson9583]

You could put two on top of a direct box for a tiny aux board

[@miguel1927]

In a series configuration, would the latency introduced by multiple ToneX units be excessive for the system?

[@guitarplayer5932]

i haven’t found anything that will match my tube amp and pedals for live or recording im talking clean to dirty to lead in real time, most digital modellers sound sterile to me and affect my playing.Ten thousand captures and 9990 are the same or useless?

[@burnz0021]

Just bought one the other day and I have to say this thing is not as simple to get working properly as many videos make it seem..

[@robbarker9878]

How many led colors are available? I wouldnt need 20 amp presets but 3 primary and 2 I use less often is realistic.

[@carpediem4413]

So for pedal captures, I get how you should capture different GAIN & TONE snapshots but what about VOLUME/ OUTPUT of the pedal when capturing? Set it at noon for all captures???

[@prozaccowboy]

I bought your everything pack and all of the models have no sound. How do I get a refund.

[@MeTuLHeD]

Things I never thought I would hear: "This pedal does TOO MUCH." 😆

[@7riX7er]

H90?

[@WarzoneVictoryWins]

I wonder what the next Big Tonex device will have that Tonex doesn't have. Stereo + FX. Is that it?

[@michaelthimes]

The manual isn’t clear on the following. Does the IR cabinet option work or can users only engage the built in cab sim?

[@jackprice7828]

This was a really interesting discussion on the use of 2 ToneX 1’s. Is there any use of the ToneX for acoustic?

[@robbarker9878]

If it does custom IR there shouldn't be any reason it can't do acoustic IRs. Although if I put it in the location where I'd want amps that's not the same spot I would put acoustic IRs, so likely that will remain hx stomps job for my use case.

[@bradatherton9369]

9:20 about the used market, IK Multimedia has that market somewhat under wraps because of the Tonex licensing. Theyll make you buy the software package, which often is more that the cost of the pedal! This way they push sales volume.

[@guitartoneSA]

Are you're saying if someone buys a used ToneX one they'll have to buy the software separately?

[@MasterArpeggioSystem]

My main recording tone (minus fx) is the *J. Rockett Blue Note* into the *Tomsline Shaper* for 2x12 cab simulation, so it's like I have a 2x12 Blue Note combo. Could this combo of pedals be captured in the ToneX One?

[@mariomazza9235]

Why does it sound so harsh and spiky?

[@joshbimthedoctor]

This is so brilliant, as someone who really still prefers my amp, my trouble has always been the high cost, i always liked my modelers but sitting on 500 or a thousand dollars of something i dont love as much as my amp they were always first to go when i wanted some money. 179 is such a good entry point. I think these have the possibility to sell like crazy

[@menschlicheswesen84]

How would you compare the IK Multimedia tonex one with the spark modeller from positiv grid...?(i have one) Just the quallity of tone i mean...! Are there better amps for metal sounds in the tonex as in the spark software...? Please answer...! Thank you...😊

[@wonderz_808]

I run my tonex pedal throrugh my spark and it makes it sound amazing. Would give it a try if you can

[@miguelnunez3858]

Would the Tonex 1 pair well with line 6 HX ONE?

[@hectorsantander4756]

I think so, And it should give you a better tone than the big flagship multifx from main brands…

[@norfolknwhey4787]

Does the pedal come with their amp/cab plugins, or do you have to buy the package separately?

[@nickm.9474]

Hmmm. What if your drive tone x goes before your amp tone x. I think you could handle telling them apart. Haha.

[@they_arent_human]

I wouldn't say "I feel like they could've done 4 slots" the more the better. You can just use 4 slots if you don't want to use 20.

[@Bob1Gee]

You are correct. I’m a soon to be 59 year old player who’s had a tube amp in one way shape or form for decades. But as I get older I find it increasingly more difficult to lug those amps, and pedalboards to gigs. I also am not that tech savvy, so deep diving into menus and tweaking is very intimidating for me. And, I didn’t want to spend $500 or more for a unit that gave me access to 9000 sounds. I’ve only ever only used only 3…….clean, crunch and lead/solo. So for me…..for a 179 bucks, is perfect 👍🏻

[@SeattleSam-ul5hr]

I’m a 57 year old bass player, I only want to model my amp, cab, comp and maybe a drive. With this I can park 3 blocks away and still carry my entire rig easily, but I’ll need to bring a software engineer with me in case something goes wrong.

[@jrr832]

Bloody youngsters always moaning 😅

[@bobbyodell8676]

So have you ran the ToneX into the Kemper like Josh/JHS did the Kemper?

[@JaneThorson-dm3ev]

Does the pedal come with loaded presets already?

[@BAND-MAID-USA]

Yes. 20 of them.

[@religionoffreedom]

They should make it where you can mix and match the colors of the 3 knobs, I previously assumed that was the case.

[@anthonyptak8650]

I’m sticking with my first edition TECH21SansAmp😅 and my pedals collection. The last thing I want to 😮😮😮😅to do is sit in front of computer screen speculating on tone😅.

[@religionoffreedom]

@@anthonyptak8650 I already use AmpliTube primarily for tone, and have been running my laptop through my acoustic amp, so this is a must have for me. I didn’t want the bigger one because I thought it lacked a few features for the price, and was hoping they’d make a better version soon, but this is a good compromise.

[@john_sandilau]

Now that you threw it on the table, please upload some new captures on the QC cloud of the taco bolt and other pedals!

[@StevenHess]

So I'm confused. Let's say you profile a $5,000 Klon does that have the full functionality of the real deal?

[@securitylizard]

This is "profiling" rather than full modeling. What that means is the owner of that Klon would dial it in to "ideal" settings and run the profiling process. That means that the resulting Klon profile would respond exactly (or as close as we can reasonably achieve with current tech) like you glued the knobs in place and then plugged your guitar into the pedal. You get an accurate response which is often indistinguishable, but you can't twist any of the knobs on the pedal. Because of this, many times you'll see people produce capture packs that have multiple different capture files included. For example with a Klon you might have captures for a clean boost, then low medium and high clipping settings, and maybe even more captures with different settings on the tone knob. People also do captures WITH pedals enabled (NOT time based effects though), so if you downloaded a capture called something like "Klon low gain + Dumble ODS" that one proflie gives you the sound as if you were running that same signal chain, just again with all the knobs glued in place as they were originally set by the capturer. The knobs you see on the Tonex units are post-amp EQ rather than corresponding to the tone stack of whatever profile you are running. TL;DR: think of a Tonex profile as someone dialing in that Klon or amplifier for you, gluing the knobs in place, and handing it to you. Can't change the actual pots and switches on the circuitry, but you DO get to play through it.

[@dirkprice6478]

I believe if you put some Fralin pickups in that guitar, you’d be astonished at how good it sounds. The$40 Squier sounded better than Goldie IMHO. Y’all contribute greatly to the guitar community and I appreciate it! I like the sound of every other guitar being used in your videos, far better!

[@JoeFic9997]

I just bought a Hotone Ampero mini a few months ago. Definitely bigger than the TONEX One but I like the touch screen interface better. It also has all the effects and plenty of amps and cabs too. Plus it’s got a looper and rhythm section. Now I’m wondering if I should have waited for the TONEX One as they’re about the same price. I’ll see if anyone does a side by side?? The Ampero mini doesn’t do captures at all but I do use it for travel and headphones practice. Anyone tried a comparison?

[@vince8081]

You're absolutely right, i would love a firmware update for the big tonex model to add profiles (like 1.amp, 2.drive pedal 3.boost or second drive pedal) It would be killer.

[@johnnylayton1672]

Is this unit the Line 6 Pod Express antidote for capture tech fans? And for the wet/dry or stereo fans or anyone wanting to run 2 pedals in parallel, is there a latency issue for the ToneX One to consider when running different programs?

[@thedonylama]

you could run 1 of them in stereo too right? the output has a stereo/mono out

[@johnnylayton1672]

@@thedonylama Sure but the Toan Junqui guys here are on a 2 pedal not 1 pedal thought train and so I wanted to shine the spotlight pronto & give them more fuel to hype this killer new product if they saw fit.

[@Smart-Alex]

Line 6 pod express is a plastic toy though

[@BaldingElephant]

@@Smart-Alex Yeah, my toy is better than yours cause yours is plastic.

[@Smart-Alex]

@@BaldingElephant LOL, I bought it and gave it to my dog as a chew toy. Kidding, I sent it back.

[@roryt1985]

For me personally what’s wrong with it is their presets are absolute trash. In my experience you can tell a lot about products like this from their stock presets, and this has some of the worst I have ever heard.

[@lc4754]

world record number of blinks during a video.

[@shorerocks]

Hm, I just remember I got a Hotone xtomp on my studio pedal board. No idea what the price was, 7 (?) years ago. There I can load of pedals and amps. I think I will revisit this now. 🙂

[@sirjaz1]

can these be used with the fender switchboard?

[@ToneJunkieTV]

Yeah it should work nicely in one of the loops.

[@Alfernav]

Next product should be one pedal with Stereo Amps :P

[@Alex_Martz]

Does it work with ToneX Max software if we already have it?

[@ToneJunkieTV]

Yeah same software and you have all the max tone models you can load in this little guy.

[@schlagdog]

I’m definitely waiting till IK makes a big board with all the bells and whistles. I actually modeled my Klon with the QC 2 months after it came out. Actually didn’t like the way the QC captured it and sold the QC at month 3. I missed scribble strips and the unit was way too far behind the competition. I’ve got a feeling a big Ik board is going to crush everyone else. I just really want a helix with capture tech and now it’s too old to buy another Helix and a ToneX One to put in a loop.

[@lenphil9875]

Still love my 30 year old Boss ME8. But it only sounds good into an amp. Hoping this will give the amp sound but still use the ME8 for all effects.

[@ShreddingFinn]

I wonder if drive manufacturer's are starting to sweat

[@NO-TALK-GuitarPlugin]

No, pedal users wants one thing = analog gain/distortion/overdrive into real amp. All analog. They want to feel like there’s no question about the legitimacy of their tone. I think Kemper and Neural DSP are sweating a lot 😂 I mean ToneX is scientifically better (null testing have proven) and now every guitarist can afford this little sexy pedal.

[@florisvanlingen]

@@NO-TALK-GuitarPlugin So true, I would use this for the amp captures with real pedals, but probably not for having multiple pedals in one enclosure

[@zombizombi]

@@NO-TALK-GuitarPlugin I mean null testing shows you how close it is to analogue as well.

[@jturquoise]

Nope Not at all I love digital modeling But I prefer my pedal drive over the simulation.

[@carpediem4413]

I’ve captured my Klondike KTR and a few other pedals and while they sound very close, you lose the flexibility and gain range the pedal gives you. The real pedal sounds “magical” but the attire sounds like a facsimile without all the range and special sauce that makes the pedal attractive in the first place.

[@taylormesa]

Getting two “One’s” for dual amps and using my OG ToneX for drives. 👍🏻

[@thesoozeTJ]

Video coming on this!

[@taylormesa]

@@thesoozeTJlooking forward to it!

[@EumirBethbeder]

@@thesoozeTJ waiting for this !!!!

[@caevizcarra]

sick!

[@jimsimmons2674]

Why cannot IK Multimedia let you combine Overdrive pedals with the Amp Captures?I know you can have a complete Capture with OD and Amp models baked in one capture but i would rather have a choice of different Overdrives that i can select to go along with the Amp Captures?

[@jabelar2008]

Because they're squeezing into the hardware capabilities of a small pedal that costs $179. And like you said, you can bake in all the combos you want and switch them just as easily as controlling the overdrives independently. Sure it is a bit more work, but you can achieve the result you want.

[@jimsimmons2674]

They could still maybe model 3 different overdrives for example:Boost,Klon and a Tubescreamer!A baked in OD with Captured Amp is still not the same as having independent overdrives to choose from and be able to tweak the overdrive with Volume,Tone and Gain controls!A baked in overdrive with captured amp is set in stone!

[@jframjams]

Side note: the finish on that Strat...

[@thesoozeTJ]

it's the BEST

[@musiccreation1198]

"Brilliant product" ... yep ! TRS out can be a headphone out (UA !!)

[@hectorsantander4756]

Kemper player has been annihilated at this point

[@thesoozeTJ]

If you don’t need the effects!

[@NO-TALK-GuitarPlugin]

@@thesoozeTJhaving ToneX one + Eventide H9 or HX stomp is a lot better than kemper player (I have all of these I know ;)

[@thesoozeTJ]

@@NO-TALK-GuitarPlugin I could totally see that 👍

[@hectorsantander4756]

Tonex One + HX One > Kemper Player

[@hectorsantander4756]

And that combination is cheaper

[@terrymcgee7361]

You were correct. This will be my first digital amp. Just ordered yesterday. Can’t wait!

[@nashmanzl]

To me, the Tonex (other than of course it's profiling capabilities) Is a multi-effect unit that doesn't delay or modulate. It does about everything else. Reverb, gate, separate EQ section from the tonestack, compression, any OD or Fuzz or Distortion.

[@norfolknwhey4787]

There’s no delay option within the software?

[@nashmanzl]

@norfolknwhey4787 the November update will change that apparently.

[@martydibergi5228]

i am old can i just use it in front of my Matchless? thanks for any help!

[@colinparks619]

Hats off to ik for not pricing these like neural, kemper and fractal The tone x is rhe real deal tbh I have qc and kemper, and imo tone x is the best for pure amp tone

[@BobGuido]

Glad this exists. IK Multimedia got this to market just in time. NAM player pedals in this format will flood the market... S O O N

[@orryfishburne5326]

I really love this concept. I personally dont care about the mini pedal format since a normal enclosure with top jacks takes up the same amount of real-estate, but i definitely respect the engineering aspect of it. Its definitely impressive what they were able to achieve in that size of an enclosure. what i love is the simple form factor and more importantly the price point. Im still new to modeling. The UAFX Dream 65 was my first entry that i enjoyed into this world. It really changed my perspective on amp sims which sparked my interest in profiling. I would love to try a profiler, but its kinda hard to convince myself to try a more expensive unit like the big box Tonex or the Kemper just to satisfy that curiosity. I think the Tonex One is perfect for someone like me to give it a shot since its so affordable.

[@adamdeleon2776]

The guy in the left had it 💯 when he said this would be the first modeler that people buy. I just ordered one (my first modeler). I only wanted the amps, no need for effects etc. I wanted to try it out w/ my other pedals. I’m a bassist looking to check out other amps for little cost. 😂

[@joejohnson8966]

This is what kemper SHOULD have done 7 years ago. This is wonderful. 7:25 YES.

[@guitarplayer1969]

Atomic did it back then with the AmpliFire Box. They just didn't have the traction.

[@joejohnson8966]

@@guitarplayer1969 True.

[@nickgriffis3405]

I think that this is only truly useful for the person that just uses the same profile, set and forget, at all times. I don't think it can really be used for anything else in a live context for amp modeling. Using it for a drive pedal will be fascinating.

[@robbarker9878]

Agreed. But that's a lot of people. In the real world tweaking my amp mid set would require running across stage or even to another room. (I'm so glad to not drag heavy amp around anymore too!)

[@seongbinchoi917]

⁠​⁠@@robbarker9878I agree with you. This pedal is useful for majority of people who use amp sim pedals because the point of using amp sim is to maintain consistency of the sound in every gig. So I think I’ll pick this one.

[@HomeGuitarMods]

If only the NUX Amp Academy sounded this good. Has all the inputs and outputs a person needs but just lacks in sound. Still I use it live because no other pedal gives xlr, 1/4 inch out with a switch to defeat the ir, and an effects loop. I guess I must be a niche player who doesn’t want to use frfr (I did for a while). I love having consistent ir to foh for my ears but using a real open back cab (orange ppc212ob with an Orange pedal baby) on stage.

[@WholeLottaBulldog]

Apparently im the only that loathes tiny pedals.

[@RByrne]

I probably would, too, but I have no clue what this thing does.

[@Maschine_Elf]

I also hate mini pedals.

[@WholeLottaBulldog]

@@Maschine_Elf my man.

[@therealmiddy]

I don’t usually like them… unless they’re my whole rig!

[@josephlively2524]

I won’t buy a mini pedal. Hate them.

[@MotownGuitarJoe]

I WISH this thing was MIDI controllable

[@PrestigeWorldwideNAM]

Its not 😢 ????

[@BBHarpy]

...it is...

[@zedkent4287]

Headrush lets you mix amp and drive captures

[@phunkyjunkee]

Man, I love my analog pedals and tube amps way too much to even try one of these. Maybe for worship tho, idk

[@JohnnyOskam]

I just need 4 channels otherwise I would totally use something like this

[@chrisdover8507]

Why isn’t anyone talking about no presence control? It’s a deal breaker for me

[@colinparks619]

Why ?? You change the presence in the editor before you load it on....hardly a deal breaker

[@chrisdover8507]

@@colinparks619 total deal breaker. So you gonna take you laptop to gigs to dial in the presence through the PA? 😂. It’s no different to deleting the midrange control

[@paulburton5150]

Personally, I prefer modelling over capture as it allows for more tweaking and besides, I don’t own a bunch of high end amps I want to capture, so I am happy for engineers at Line6 to model some high end amps for me. I would like to see Line 6 come out with an amp version of the HX One. For me it makes more sense than the effects model as you only need one amp at a time, and having a unit with a screen that lets you easily select your amp model would be very useful, and free up dsp on the Stomp.

[@tiomkinnyborg2289]

A decade old pedal the Zoom MS50g smokes this thing. It has a screen so you can see what you are doing. This is just a modern thing to make people spend money then regret it in a month. The MS50g is around 60 pounds or less 2nd hand. Make junk and say it is 'A.I.'. Wheel out the shills, Profit.

[@ChakraOver9k]

You're better off just getting a multi effects unit instead of buying 2 of these pedals. The Ampero 2 stomp or the quad cortex would handle all of this tbh

[@kylefletcher8489]

Hmmm. Could I capture my Revv G50 without buying the Tonex capture hardware if I have this??

[@ToneJunkieTV]

The pedals don’t capture… the software does. The Tonex capture box is optional. It’s just designed to help you set levels but your interface sends and receives the signals.

[@kylefletcher8489]

Sweet. Thank you! I’ve tried reading up on the manuals but I couldn’t find it. Then I’m definitely buying one of these. And maybe a big Tonex too. I love the G50 but not exactly portable or pedalboard friendly

[@trunks828]

I use the quad cortex for everything these days. But I do have a grab and go type board with my favorite drives and verbs this definitely is something I may add. Probably add the 65 deluxe like on my qc lol.

[@Mattbuchanan71]

Two with cables = same size on board, as big one

[@Flacsabbath]

This does look pretty sweet, Never want to go back to that Tonex software though, and I’m color blind… Hopefully the other capture tech companies will follow suit, but with a better browsing mechanism than colors🤦🏽 The width of 1 scribble strip isn’t that much wider.

[@brettphillips2309]

I’m having g a big issue with the tone x one. I’m going straight to the computer ( win 11) and the out on the pedal into an Frfr. I cannot edit with software because there is the tone of the pedal playing at the same time as the software playing a tone. I can’t use the software to edit at all or even see what things sound like before I even add it to the player. Big pain in the butt.

[@ZombieLincoln666]

IK has been killing it recently. I love their iLoud monitors and their synths

[@BobSince1981]

I love using my ToneX for drives with my UA amp pedals.

[@cchavez248]

I think the guy on the left hit the nail on the head, ToneX 1 will be the digital amp to get the naysayer's attention! At first, I thought it would be UAFX Dream but +$300 is a no for many!

[@DennyBob521]

I’ve had every IK interface except the Tonex. I use IK with an old Line 6 Sonicport VX interface I keep in my “Traveller” EG2 travel guitar Gig bag. Never impressed with IK Multimeida’s sound, but until Kemper makes an iPhone app interface with a really small form factor, they’re the best. I tried to use IK as my on stage tone and it was so lifeless/digital, i pulled it and got my old backup HD500 out of my trunk for the secobd service.

[@iamstan_rimp]

I have 2 of these. I use one as a 2 channel amp. Set it and leave it! I use the other as a drive. My second channel on the Tonex One acts as a boost for my solo tone. For $149 and it’s small…it’s definitely better than spending $600-$2000 on the bigger units.

[@fndrr42]

Tone at the end is 🔥

[@robertj1303]

The Mooer S1 and IOS/Android software is a great user experience, Tonex v2 should learn from the S1😄😄

[@roberthan8718]

This will further push pedal makers into doing “limited runs” at an increased price point. Just another evolution of the market.

[@bradatherton9369]

It's cheaper than the Boss IR-2! And the IR-2 has been on pre-order status for 5-6 months, maybe they saw this coming...

[@Michel-r6m]

If you just use this pedal for one effect and use the compressor/noise gate it can be worth the money. Nice video guys 🤠

[@internetmoney221]

Turkish bath house guys

[@CarlGtSmith]

TONEX ONE is nice! Guitar processors can make a big difference in sound depending on the CAB IR you use. actually there are many IR products on the market, but I think DYNAX IR has the best sound. As stated in their product description, DYNAX IR is really fast. When using IRs, the pick attack is sometimes delayed, and it is difficult to add picking nuances, but their IR prevents all of that. It's revolutionary!

[@BAND-MAID-USA]

You post this on every video.

[@zlahan88]

Why not have 4 on the board..lol

[@bradatherton9369]

It can happen! Mind you, there will be a stack-up effect of latency, approx 3 mS per pedal. 2-3 pedals could pass for negligible, but after that the latency starts to make you feel disconnected from the instrument.

[@ttexas1963]

Your Deluxe Reverb Tonex capture is amazing. Its fat, clean, juicy and responsive. It's the best non tube sound ive ever heard, in any pedal or device, and loves analog drive pedals.👍

[@kostastournavitis7975]

I dislike the use of colors for selection. Something I’ve never heard anyone mention on the internet is that around 8% to 10% of all men worldwide, including myself, have a color deficiency. Therefore, using colors for selection is not a good idea for us. Anyway, I bought the pedal because the sounds are very good! My plan is to bypass my Mooer GE300 amps using the four cables method with the Tonex. Since I play only acoustic guitar, I don’t need all the overdrive and heavy metal tones. I only need clean tones. My Mooer GE300 Lite is sufficient and very good for clean tones, but I wanted to have the Tonex as well.

[@RByrne]

I still have no idea what this does

[@mikedfurman]

There’s about 1,000,000 videos on the tonex one now. So, plenty of ones to watch and learn. HW has one himself - just not this one.

[@guitartoneSA]

I dunno. If you buy two you'll end up buying three. Then you're at $540.00 for 6 Captures live and only Reverb and a Compressor. I think the Kemper PLAYER wins this battle...IMHO, and that's with zero updates from Kemper so far. One things for sure, IK Multimedia marketing completely destroys Kemper marketing...the weakest part of the Kemper is its lack of marketing skills.

[@philfort7886]

still better than the kemper player

[@JohnPaulsEuropa]

Bingo..I'm in as a first-timer. Not spending 1k on something that takes a huge learning curve, see how it goes.

[@jimtalltheislandbrothers6639]

And I am red green colour blind😢

[@thesoozeTJ]

Ruh roh!!

[@tiomkinnyborg2289]

Good job screens were invented years ago. These people think flashing lights are an advancement. Next model will require you to understand Morse code or better still Braile. Zoom MS50G puts this to shame. Now these guys say it is cheap but expect you to buy two. $360? Just buy a real modeler.

[@kevinschuckvk]

I want the HW drive on there!

[@gerinsindanight]

what's wrong with you, rather (answer:clickbait)

[@GeorgeSampson-b1r]

Looks annoying to use

[@jips123]

2 ToneX pedals in series means 2 times the latency.

[@7riX7er]

3 or 4 in a row shouldn't bother you regarding these numbers kzbin.info/www/bejne/qZDEq2mHpc1qlc0si=r16S7zdSQNZFzHG_

[@leehenderson8132]

For same price get the pod platform.there ultimately kinda toyz anyway.why do people wanna use computers as amps.blah blah blah

[@Alfernav]

Selling my First tonex pedal to get two of these and only use them as Stereo amps :( hahaha + Analog pedals lol

[@shadrackperez7325]

Im so happy I went Quad Cortex route. You know SCREEN…

[@guitartoneSA]

I prefer using a tablet screen via wireless WiFi than a big screen on the actual unit.

[@protoolsfanatic7276]

Too small.

[@V4RIAN]

Put them in series and you are adding latency… not an analog pedal

[@sopedro01]

I just use it for drives and I love it...