"Ok guys you really dont need to spend a lot of money. Just a socket kit and this small tool box and that's it...Now over here is my $500 tool box with $500 worth of tools." 😁
@badjuju65638 жыл бұрын
spark plug spanner, feeler guages for us 4 smoker riders, wd40
@bcgal00044 жыл бұрын
so refreshing to hardly see any overpriced motion pro tools!
JB Weld, Hook and Pick Set, Imperial and Metric nut and bolt assortment kits, Imperial and Metric Tap and Die Set, wire brushes, brass punches, Flexible 3/8 extension, Vernier Caliper, Micrometer, Compression Tester, Air compressor, Angle die-grinder, Drill, 60-piece drill bit set,bench top lathe, bench top drill press, bench grinder with wire wheel, mig welder. The last 4 tools mentioned aren't really necessary, but I have had to use them many times. =) You should really have everything except the last 4. Otherwise, you will need to ship parts out to a machine shop.
@bryson_stafford8 жыл бұрын
Spring hook, T-Handle, Spoke Torque wrench are some of my favorite tools.
@DirtBikeChannel8 жыл бұрын
+Bryson Stafford Yeah, those are good things to have as well.
@SkyCandyVisuals5 жыл бұрын
Haha worth it to watch the end with the duct tape! Haha happy riding my friend #braap
@4N2IN0JA8 жыл бұрын
that was the perfect video!! Duct tape has saved my life! I was riding in the dunes on my 05 yz250 and took the number plates off and duct taped the airbox on the sides. I went for a ride and my rear wheel nut fell off haha, guess I forgot to tighten it but I was 15 ha. I ended up making a duct tape Nut and kept wrapping the end of the axle with the duct tape from my air box and was able to make it back to camp!
@DirtBikeChannel8 жыл бұрын
+Bradson Vogel that is a fun story!
@michaelbielaski35437 жыл бұрын
You and my dad would get along great in regard to tool organization. Great job!
@DirtBikeChannel7 жыл бұрын
I always know if something is missing...
@jaydengaffey94237 жыл бұрын
The most helpful thing is a set of t-bar ratchets as well as a breaker bar and ratchet spanners
@carlatamanczyk38914 жыл бұрын
Very handy are T- handles. I have a set since 1965, they have been around for a long time.
@desertghost30568 жыл бұрын
I've found it's always nice to have a bench vise mounted on the stongest bench in the shop. Always need an extra set of hands when No one is around.
@DirtBikeChannel8 жыл бұрын
+desertghost Good call. I plan on doing this too. I built a very heavy bench where it would work great.
@AdventureMotoEnduro8 жыл бұрын
well you made me go out buy new rolling cabinet , my tools in clumps all over the place was getting out of control ,not finding what i needed at hand , ,slowly filling it as i find them all
@DirtBikeChannel8 жыл бұрын
+ADV-QLD Very nice!
@drewcole99897 жыл бұрын
Nice BCM hat, I just bought the Jack last month.
@garywoodman93048 жыл бұрын
caliper micrometer bore dial gauge feeler gauges spark plug gap tool and a telescope gauge all important things to have if u build your own motors
@Tbirdshockey78 жыл бұрын
Appreciate your work!
@yaniv67843 жыл бұрын
as always usful and streight to the point, thank you
@wesleymarshall71208 жыл бұрын
Mite not be a bad idea to have a tap and die set. I have found it useful if you have a older bike. also if you ever make the mistake of cross threading or you need to do a helicoil to replace bed threads. also have a digital caliper for measuring clearances. Thanks for all of the informative videos. Great channel!
@DirtBikeChannel8 жыл бұрын
+Wesley Marshall Very good suggestions as folks built out their kits.
@Mutiny-50508 жыл бұрын
I would say that is more than 200$ worth of tools lol. I do think you are spot on though. You can get away with a hand full of tolls to break the whole bike down. I use an old Keg for a tire stand. Never used duck tape on the bike, I prefer the electrical tape. Its crazy that since I got into dirt bikes my tools have expanded and I am now an expert on fixing my bike. You have to be when the bike shop charges 100$ for a valve adjustment and 300$ for a top end.
@DirtBikeChannel8 жыл бұрын
+Chris Luton (Mutiny5050) The first set of tools in the video wouldn't be much more than 200 or so to get you started. The stuff in the drawers are a lot more than $200 :(
@123noahterfry8 жыл бұрын
I have a box about that same size that my dad gave me (had no use for it) so I filled it with everything... we pretty much have the same setup. wrench sets, screwdrivers, ratchets, ect. only thing I'd suggest adding is some electrical tools; wire strippers, voltmeter and puller tools. I got a motion pro fly wheel puller for about 20 bucks and I saw case splitters go for cheap too. btw i love your shop... soooo clean, must be nice lol Good videos, keep it up!
@Thrashmoto4 жыл бұрын
I have that exact same Trinity Rollaway. 👌
@Hulley298 жыл бұрын
Another great video!
@redneckwithajeep50016 жыл бұрын
Personally I like having feeler gauges and various gapers for spark plugs along with a set Alan head sockets in case you need a bit more leverage on your Alan heads
@desmonchild8 жыл бұрын
as always great video!!..keep up
@johannesyla-outinen5748 жыл бұрын
Danggg, I think I have almost all the thing you have to work on bikes, the only thing is i'm not organized XD awesome video tho
@johnpaulstez8 жыл бұрын
Good video. I see people in the comments have filled in with everything else you'd need or want. I'd add a quality chain break. nothing to me is more aggravating than dealing with a cheap chain break.
@DirtBikeChannel8 жыл бұрын
+johnpaulstez good call there.
@michaelmacdonald3297 жыл бұрын
Definitely need a set of picks!!
@EndOfTrail8 жыл бұрын
Love the channel! So glad that I stumbled across it. I always find myself checking in to see what you've got going on. Never would have heard of the Lectron carb otherwise. Absolutely LOVE that thing on my 250xcw. Once again, great channel.
@DirtBikeChannel8 жыл бұрын
+Rick Seymour Thanks Rick. Glad to hear that you are getting some good value out of this.
@iamaze62188 жыл бұрын
cool been waiting for a video. supposed to hit 60° here in PA tomorrow. Can't wait to get out there an ride. I cleaned the carb so im ready....
@DirtBikeChannel8 жыл бұрын
+Iamaze621 W Spring it close....
@Toolaholic77 жыл бұрын
Get a set of JIS screwdrivers for the Japanese dirt bikes.You see a lot of stripped out phillips screws on these all because a regular phillips screwdriver has been used.Vessel makes these and there are a couple more that make them
@Allwheelzdirty8 жыл бұрын
that's a nice setup I'm 14 and I only have one Stanley tool box with like 235 pieces
@DirtBikeChannel8 жыл бұрын
+andrew jeanveau I'm guessing that has most of you needs in it.
@Allwheelzdirty8 жыл бұрын
+Dirt Bike Channel mostly
@Allwheelzdirty8 жыл бұрын
+Dirt Bike Channel mostly
@halsimpson25438 жыл бұрын
+andrew jeanveau That's awesome dude. You are way ahead of most 14-16 y/o kids on the planet these days. Keep it up Andrew..! Follow Kyle's advice on this video and you will GTG.
@braapforce8 жыл бұрын
great video as always
@brannonmeador17928 жыл бұрын
are you gonna get your hands on a beta anytime soon
@devodar25797 жыл бұрын
For today's bikes you really need a high dollar snap on torque wrench (if you review how far off most torque wrenches are) and a nice electric screw gun. Nice show Kyle, thanks for the great channel.
@DirtBikeChannel7 жыл бұрын
I have a torque wrench, but I'd like a more "high dollar one" :)
@giovanni1227 жыл бұрын
Maybe I got lucky, but my Harbor Freight is within
@benjaminbruneau59636 жыл бұрын
Devo Dar
@benjaminbruneau59636 жыл бұрын
Devo Dar k
@andyenduro4878 жыл бұрын
Need to get myself a tyre stand! Fed up of changing my tyre on my hands and knees haha! And Nice Shelves
@DirtBikeChannel8 жыл бұрын
+Andy Enduro yeah, it makes things easier.
@kristianlunsford16618 жыл бұрын
Haha I'm a little late on the video! Do you mind telling me where you got your wrenches and Torque wrench!
@DillyHD8 жыл бұрын
I've been needing a video like this so thanks
@DirtBikeChannel8 жыл бұрын
+DillyHD_ You are welcome.
@danb67318 жыл бұрын
Nice set up!
@OCDDirtBikes8 жыл бұрын
Beautiful Shop Man
@DirtBikeChannel8 жыл бұрын
+OCD DirtBikes Thanks Brother.
@DerricTubbs0x008 жыл бұрын
I was going to point out that this seemed like one of your lower quality (less organized, more mistakes, etc) videos, but you made up for it all with the duct tape clip at the end ;)
@alexhatheway9478 жыл бұрын
Hey Kyle could you do a video on air filters? Cleaning, oiling, what works, what doesn't. Thanks! Love love love the videos you make. They have helped me a ton.
@DirtBikeChannel8 жыл бұрын
+Alex Hatheway I've got that on the list of video topics to get to. That list is growing all the time.
@blakehoskins92938 жыл бұрын
nice set up. great vid as always
@DirtBikeChannel8 жыл бұрын
+blake hoskins Thanks Blake
@matthiaskiewer80198 жыл бұрын
good stuff Kyle , .... hey, everything so neat, love it! but why are the wheels on the tool box/cart are not properly lined up ... sort of ruins the whole video ;P
@Tbirdshockey75 жыл бұрын
Nice Greg Norman shirt 🙌🙌
@cadwarrior8 жыл бұрын
nice toolbox and clean setup!!! when i bought my Ktm, i bought AC Delco digital torque wrench in 1/2 and 3/8 that fit on standard ratchet, easy to setup on the digital screen and have sound warning when approching preset torque value! I didnt want to overtorque screws or nuts on a brand new bike! Im still waiting your wheelie tutorial video!
@DirtBikeChannel8 жыл бұрын
+cadwarrior I'm waiting for spring!
@IanHowes20148 жыл бұрын
Iv got a pretty great wheelie tutorial on my channel. Check it out!
@throttletwstn97318 жыл бұрын
You should do a tour of you shop
@codyburkhammer8147 жыл бұрын
Great video. really helpful.
@samwittstruck.66856 ай бұрын
A real bench vice 6 inch is a happy medium.
@halsimpson25438 жыл бұрын
Great job man..!!
@DirtBikeChannel8 жыл бұрын
+Hal Simpson Thanks Hal.
@toddhickox4757 Жыл бұрын
Great video !! Was wondering what size ft lbs do you need your torque wrench to cover?
@BigRayH8 жыл бұрын
+1 for the 100mph tape!!!
@rileygenereux67558 жыл бұрын
That was good video. Shows that you dont need the 10 million piece set at sears and i tool chest for every tool just to work on bikes.
@DirtBikeChannel8 жыл бұрын
+Riley Genereux Glad to help.
@LittleLifeJ3 жыл бұрын
Your budget for all the tools you need is about $500 to $700 for a good set of tools.
@fredericjordan72338 жыл бұрын
Having tools for forks is a must, fork seals are expensive to get done at the dealer, i think its a scam...
@DirtBikeChannel8 жыл бұрын
+Frederic Jordan yes, those are on my list.
@karigreyd28088 жыл бұрын
I have way too many tools. I have like 3 toolboxes full of tools. But I'm not organized. I have too many bikes apart at once.
@DirtBikeChannel8 жыл бұрын
+Krevin Grard I don't think it's possible to have too many tools :)
@karigreyd28088 жыл бұрын
I guess thats true lol
@calebhageman11258 жыл бұрын
Zip Ties!!!
@evannolan44368 жыл бұрын
Bearing puller
@badjuju65638 жыл бұрын
soft blow hammer. inch pound and foot pound torque wrench.
@joentexas8 жыл бұрын
+Bad Juju Bought an inch/pound torque wrench by mistake. I'm thinking about taking it back because I've always used a foot/pound wrench. What's the difference or conversion factor. Would it be easier to use foot/pounds?
@badjuju65638 жыл бұрын
+Joe-n-Tex inch pound is used for low tentions typically in alloy or soft metals. keep it and just get a foot pounder also.
@ericunder3 жыл бұрын
How about a spoke torque wrench?
@TrailBoundco8 жыл бұрын
Also why the 8oz ballpin hammer
@DirtBikeChannel8 жыл бұрын
+Trail Bound co It's for hitting things that only need to be hit with about 8 oz of metal :)
@tuu_nainen8 жыл бұрын
If you don't need some of the sockets you have, you can send them to me to Finland..
@DirtBikeChannel8 жыл бұрын
+Aleksi Tuunainen I think I can find a use for them. I own more than just bikes.
@tuu_nainen8 жыл бұрын
+Dirt Bike Channel That was meant to come off as a joke, sorry if you took it any other way :p It happens almost every time i make a joke because i don't speak English as a native language :)
@TorqueDorque8 жыл бұрын
+Aleksi Tuunainen Uh oh Aleski, you made him mad... You're Finn-ished. No, your joke was funny and it didn't come across wrong. He will ship those extra sockets out to you Monday. :)
@danpluso4 жыл бұрын
I came for info on your torque wrench but didn't get much info on it :( I think it's an ACDelco?? (Edit: Oh not in this video, but I think you have the ACDelco digital in newer videos). Just wondering if I should get the 3/8 and 1/2. How do you torque the bigger stuff if you only have the 3/8" wrench?
@RP-jk2hz4 жыл бұрын
Where did you get those tire shelves? Did you craft those yourself?
@johnsantibanez69178 жыл бұрын
I will be moving to the park city area in May and wanted to know if you could recommend a few reputable ktm dealers in the state. Any info is appreciated. Thanks!
@garywoodman93048 жыл бұрын
I'm surprised u don't have a compression gauge it's very necessary for 2 strokes u can not only know by keeping track of hours of run time but you can see and verify if it's time for a top end rebuild
@DirtBikeChannel8 жыл бұрын
+Gary Woodman Good call. Just building up the tool kit here.
@TheHigginsmat8 жыл бұрын
+Dirt Bike Channel. I like how you say 'standard' when the U.S if one of the only countries still to use the imperial system for bolts. Just sayin haha.
@DirtBikeChannel8 жыл бұрын
I do see your point... however... That is how we say it over here... metric and standard. 300 million people in this country understand me :)
@garywoodman93048 жыл бұрын
1 more thing clutch basket holder tool by motion pro
@DirtBikeChannel8 жыл бұрын
+Gary Woodman I'll have to look into that.
@WillyD16 жыл бұрын
What’s the super glue for your decals ?
@wheelspeed8318 жыл бұрын
Is that the Shinko sitting off to the side you put on not to long ago?? How did you like it?
@DirtBikeChannel8 жыл бұрын
+wheelspeed831 Only have 2 days on the Shinko. Need to ride it some more before making any judgements on it.
@laughingbabyfarm26105 жыл бұрын
Crescent wrench...that is all
@joshcarlino80675 жыл бұрын
What brand tools are they
@massimogiammarino77318 жыл бұрын
How did you make your tire shelf I really like it?
@DirtBikeChannel8 жыл бұрын
+Massimo giammarino My dad made them for me for a Christmas present.
@MrBuckshot186 жыл бұрын
Where you get the t handle but drivers?
@ivanmihalj8 жыл бұрын
sam, how did you mount those tires on the wall?
@josh.p29488 жыл бұрын
+Ivan Mihaljevic Kyle, his friend is Sam. He literally said it in the 1st 5 seconds of the video.
@TrailBoundco8 жыл бұрын
What do you use the Teflon tape for?
@willselwood39658 жыл бұрын
Teflon Tape is I mostly used for sealing up threads/ valves that will be having air passing through them. It stops leaks and probably has many more great uses (:
@DirtBikeChannel8 жыл бұрын
+CrustysMoto Ditto.
@jeremy250f58 жыл бұрын
should be snap on!
@orangeblooded40058 жыл бұрын
What about your spoke wrench?
@DirtBikeChannel8 жыл бұрын
+Orange blooded It's in my riding bag.
@dionbray40483 жыл бұрын
That looks way more then a couple 100 bucks
@gunnersmith81888 жыл бұрын
When will we be seeing some riding videos?
@DirtBikeChannel8 жыл бұрын
+Gunner Smith Soon my friend. Lots of snow here still in the areas that I like to ride.
@web30366 жыл бұрын
I can't believe someone would give that video a thumbs down they probably do it in 2 minutes
@r.jjetskivids58108 жыл бұрын
Has that workbench been dirty yet? Haha. Wouldn't want to do anything on it
@DirtBikeChannel8 жыл бұрын
+R.J Jetskivids It was new in this video. I do keep stuff clean though.
@pwndwner8 жыл бұрын
what about a torque wrench? because thats mainly why i even searched this video... i also would like to know when brand of torque wrench and what sizes im going to be doing the valves on my bike and dont want to just TIGHTEN everything down i rather go to spec thanks i appreciate it i was going to go with cdi/snapon i really dont know what to do i have alot of tools i need to buy and i just want to get the best possible price you know im a penny pincher
@DirtBikeChannel8 жыл бұрын
+Jon Taccona I do have a torque wrench, but I'm not really satisfied with it. Going to look for something better.
@pwndwner8 жыл бұрын
+Dirt Bike Channel I'm buying two torque wrenches both Cdi the snap on certified torque wrenches on amazon These are the links ... Tell me what you think I have no idea what to buy if you have any suggestions please let me know www.amazon.com/gp/aw/d/B002LA19P2/ www.amazon.com/gp/aw/d/B000I1POYS/
@fishbonefla59175 жыл бұрын
He doesn’t have the most important tool,,, Bluetooth radio playing country music
@tdbelo8 жыл бұрын
Air compressor maybe
@DirtBikeChannel8 жыл бұрын
+Team Riddle I have one of those in the shop too. Didn't bring it into the shot though.
@solarxsniper2698 жыл бұрын
What are the shelves called that are undernethe the KTM flag?
@DirtBikeChannel8 жыл бұрын
+Solar XSniper My dad just made them for me out of tires. It was a Christmas present.
@solarxsniper2698 жыл бұрын
+Dirt Bike Channel Oh.. Well he did a really good job lol, They look really unique and cool
@gkwessman4 жыл бұрын
Doesn't look like you have any zip ties! ;)
@ryanbarry20436 жыл бұрын
A vise
@badjuju65638 жыл бұрын
zip ties...... they are almost structural....
@DirtBikeChannel8 жыл бұрын
+Bad Juju Good call. I have those in my shop but didn't show them. I'm an idiot!
@jodytucker44748 жыл бұрын
Zip ties
@DirtBikeChannel8 жыл бұрын
+Jody Tucker Yes, I have them in the shop but forgot to bring them into the video.
@BRWfilms5 жыл бұрын
Philips.... You make me cringe
@iforgothisname25647 жыл бұрын
*cough* inferior system *cough*
@driftnick18 жыл бұрын
First
@DirtBikeChannel8 жыл бұрын
+Enduro days It's funny to me how this is a thing. First.
@driftnick18 жыл бұрын
+Dirt Bike Channel Just the competitive streak in us dirtbikers ;)
@brannonmeador17928 жыл бұрын
are you gonna get your hands on a beta anytime soon
@DirtBikeChannel8 жыл бұрын
+Brannon Meador Just waiting for you to sponsor me :)