What Will Our Brand New 434 Run… Testing Blackie At US 36 Raceway

[@roycervantes1341]

Great racing content Lucky, 👍👍👍👍

[@FORCFED]

Love this Camaro!!! Beast 😎🤙💪

[@mr.luckyracing7112]

Thank you

[@BigUnk85]

Nice solid bracket build there

[@mr.luckyracing7112]

Thank you!

[@markdonovan9247]

great video

[@mr.luckyracing7112]

Thanks!

[@sampson7941]

Nice little ripper

[@mr.luckyracing7112]

Hell Yeah!

[@rbrooks5766]

Looks like you need a little more weight on the left rear to keep it from driving left off the line. And maybe stiffen up the compression on your rear shocks to keep it from bouncing as it leaves the line.

[@mr.luckyracing7112]

We’ve been chasing shock issues with this car for awhile it’s just got to much power for the set up we have. I’m hoping to get some better shocks and adjust on them for it not to do that.

[@OutlawChevy2]

That's a fast n/a hotrod my friend!

[@mr.luckyracing7112]

Thank you!

[@paulharmon8788]

Nice video young man great looking car and thats a strong runnin sbc i love it keep getting after it dont listen to the bullshit and haters.

[@mr.luckyracing7112]

Thank you appreciate the support!

[@roycervantes1341]

What’s up Lucky, 👍

[@mr.luckyracing7112]

How’s it going hope you enjoyed the video!

[@fbombcamaro434]

Would help if you are bit more specific. What total timing do you run? What are the cam specs? Thing is flying!

[@mr.luckyracing7112]

We Kinda Jump Back and forth with 34-37 degrees of timing.

[@javonsumpter9678]

That thing runs good

[@mr.luckyracing7112]

Thank You!

[@javonsumpter9678]

@@mr.luckyracing7112 ,no problem

[@OutlawChevy2]

All nighter hotrod shit is awesome!!!

[@Pepper_brooks]

Awesome videos mate! Just found your channel. Gday from Australia 🇦🇺

[@mr.luckyracing7112]

Thank you!

[@tomcostello5058]

Thankyou for the vid!

[@mr.luckyracing7112]

Thank you for watching!

[@richardsmith-qy6vl]

I like the car reminds me of car a few guys tried to build back in the 80s they just wasn't as fast

[@mr.luckyracing7112]

Thank you

[@jaypisme2343]

What did the old motor run?

[@harvhixx7716]

Are u using 23 degree heads and what size headers I am also have a 434 1st gen Dart little M sportsmen block

[@mr.luckyracing7112]

Yes 23 degree and i run 1 7/8 inch headers

[@harvhixx7716]

May I ask what trans and rear gears u using

[@HotRodDave]

COOL

[@mr.luckyracing7112]

Thank you!

[@kingsix3134]

Yo broski what starter r u running on that motor? Beautiful ride by the way 💪🏿💪🏿💯💯

[@mr.luckyracing7112]

We just run a Powermaster, And thank you!

[@kingsix3134]

@@mr.luckyracing7112 that’s wat I just ordered …thank god …I have a similar setup …old starter took a crap on me lol

[@mr.luckyracing7112]

@@kingsix3134 Never had any issues with that starter… Knock on wood

[@kingsix3134]

@@mr.luckyracing7112 I’m definitely going to give it a try your video’s definitely gave me back that motivation I needed 🫡🫡💪🏿💪🏿💯💯

[@mr.luckyracing7112]

@@kingsix3134 Awesome hope you keep enjoying

[@derwinrandle2682]

What compression is the motor

[@mr.luckyracing7112]

It’s right at 12:1 Compression, But the old 434 we took out of this car had the heads milled and it’s about 12.5:1

[@infamousnova]

Runnimg good

[@mr.luckyracing7112]

Thank you

[@keysautorepair6038]

Like the car does it have a glass front end by chance also what rpm were you running before you dropped it to 4000 and it slowed down.

[@mr.luckyracing7112]

Yes it does and we usually launch it about 4700-4900

[@keysautorepair6038]

@@mr.luckyracing7112 Thanks for your reply.

[@brendanbelli8769]

Two questions is that the SHP dart block, and what size tire do you have under the car? I was thinking of going with the SHP.

[@mr.luckyracing7112]

It’s a Little M Dart block and we run 30 14 size tires

[@brendanbelli8769]

@@mr.luckyracing7112 I’m curious what kind of horsepower are you looking at it and I have the same car why are you running a 14 inch tire?

[@mr.luckyracing7112]

@@brendanbelli8769 I’m thinking that motor is probably putting out 750 to 800. That car has always been a big tire car so that’s what i’ve always put on it

[@brendanbelli8769]

Hey, thank you for replying back. I really appreciate it. The car looks good sounds great. I wish you good luck with it. I subscribed to your videos so I hope to see more of it.

[@mr.luckyracing7112]

@@brendanbelli8769 Thank you really appreciate the support!

[@wes6374]

Aaaaaaaah, I like it, so Aaaaaaaaah, nice.

[@mr.luckyracing7112]

Thank you for the support!

[@lewisfoltz6306]

What cam is in that 434 and what is your final timing?

[@mr.luckyracing7112]

It is Erson 112 Cam and we play with cam timing anywhere from 2 degrees advance to even sometime 4!

[@lewisfoltz6306]

@ .50 duration? Solid or hydraulic?

[@charlesbreazeale6494]

What fuel you running I'm running e85 in my truck

[@mr.luckyracing7112]

We Run C16

[@jefferybernard4800]

What does it do in the quarter

[@mr.luckyracing7112]

Never ran quarter mile with it. Probably not too good it’s geared to run 1/8th

[@chrisgable4242]

Good stuff keep the front end down it will run faster

[@mr.luckyracing7112]

Ya but them big wheel stands are cool😂

[@havocracing6019]

That old guys mouth says he just done a 8ball.

[@sethhickle9241]

Yep..

[@BEANS-O-MATICtransmissions]

Was literally thinking the same !

[@realwill635]

how much does this car weight?

[@mr.luckyracing7112]

About 2850 without driver

[@bcracing204]

Either you’re tracks mph clock is generous or you’re new bullet makes enough steam for you to be running 6.0s .😮

[@randyj9965]

What does it weight?

[@mr.luckyracing7112]

That car without a driver weighs just under 2700

[@musclebone7875]

​@@mr.luckyracing7112 she's a feather 🪶 weight

[@mr.luckyracing7112]

@@musclebone7875 Ya it’s not too bad

[@rickykey1175]

She's bad SBC always sound's alsome good job son

[@mr.luckyracing7112]

Thank you

[@bigboreracing356]

👍🏻

[@kepjames333]

😎😎😎😎😎😎😎😎😎

[@melvincollis2688]

Wut timing did it like

[@mr.luckyracing7112]

About 34 degrees

[@melvincollis2688]

Thanks

[@brianboyd4708]

Run a smaller tire

[@mr.luckyracing7112]

That’s what i got my firebird for… I run small tire on it!

[@jaypisme2343]

That’s 650 horse power

[@mr.luckyracing7112]

I was just telling another guy that we dinoed the motor alone at like 760 or something i wanna say

[@jaypisme2343]

@@mr.luckyracing7112 that’s just the et calculator it could be off I put in 3000 pounds and a 6.10

[@mr.luckyracing7112]

@@jaypisme2343 Oh yeah with me in it car weighs about 3200 but that motor has now gone 5.99

[@drcolster]

@@mr.luckyracing7112 Can you show the Dyno pulls and results..????

[@gt1man931]

No real drag track near you?

[@mr.luckyracing7112]

Us 36 Raceway is a pretty nice track to race at and it’s convenient only being 20 minutes away.

[@Bossman816]

Thats one expensive piece of junk

[@mr.luckyracing7112]

Thank you!!! LOL

[@dennismoore9147]

my brother has 67 chevy2 run 6flat with 350 he and randy daniels{daniels race eng} just built 434 sb 850 holley 928hp at 8200rpm hoping run 4.80 he built same eng {10 hp less) for man car 50pds heavier brothers runs 4.90. will use powerglide

[@truthtalker7535]

Not bad looking good

[@mr.luckyracing7112]

Thank you

[@dennismoore9147]

what rpm do u shift what rpm thru the traps

[@mr.luckyracing7112]

7000 and usually about 7000 through the traps

[@dennismoore9147]

if u got lot better rods than stock try shifting that slide at 7500@@mr.luckyracing7112

[@mr.luckyracing7112]

@@dennismoore9147 7 is about as much as i can shift it at, it starts to kinda lug out to the shift after that

[@sc358.]

I'd assume it makes peak power at or before 6,500 with 434 cubes and the 2.47" mcsa of those afr 235s. Looks like a ton of fun!

[@mr.luckyracing7112]

@@sc358. Ya it makes a lot of power on the big end!