Wheel Stud Replacement / Replace Wheel Studs | AnthonyJ350

[@martystevens3969]

On a rear wheel drive axle, there's little space at the axle shield to remove the bolt. Lisle has a tool that works.

[@hankbridges5055]

Marty Stevens Great idea!

[@AnthonyJ350]

Thanks for sharing!

[@lowellstevens5945]

Where did you get the spacers from? What brand and do you have the web address? I'm looking for 1/4" hub centric wheel spacers for my 2004 Toyota Tacoma.

[@AnthonyJ350]

Just updated where I got them from in the description.

[@onekthien]

good info thanks for posting this video up

[@greygoosemafia]

hey man im lookin to get a shop jack for my dodge ram. im lookin at the ac delco for 200 bucks. lifts 21inches. any good? whats y our suggestion?

[@AnthonyJ350]

I don't have experience with that particular jack but there are so many out there. What I look for i I always try to buy one that is rated more than what I usually lift. I've owned floor jacks with a 3 1/2 ton capacity.

[@greygoosemafia]

Thats actually what is rated for lol. Its the ac delco at oreillys website for 200

[@AnthonyJ350]

Richard Cowtails Make sure you also get a set of axle stands that can handle the same amount of weight if not more and always use them with the jack.

[@greygoosemafia]

Ofcourse lol. Thx for the tip. I have a 99 ram 1500. Weighs about 5.5ton just got set of 6 ton acdelco. Jack stands. The 3 ton just wasent high enough

[@xxRamD3yruxx]

5.5 tons?

[@BrandonContracting]

hey what size are those wheel spacers? 5mm, 10mm?

[@AnthonyJ350]

Aaron Brandon 10mm, that's why I needed the longer studs.

[@yaboijames_]

Can I put the original studs back on later?

[@AnthonyJ350]

+TheMADDJACKO If you want the original length I would buy new ones again and repeat the process again, just to be safe,

[@yaboijames_]

Alright, cheers

[@scor440]

Or you could take it and hit it with a hammer over a socket to install it they are only .010” fit

[@AnthonyJ350]

Thanks for sharing the tip!

[@greygoosemafia]

that was super quick.

[@AnthonyJ350]

Thanks for watching!

[@heyitschinoable]

Why not just rebarrel or widen ur wheels good install none the less

[@AnthonyJ350]

heyitschinoable I actually did do that on the rear of this truck, but for the front application I need to do this.