Hi. Old video but useful. Thank you. Just replace the RH CV axle on my Infiniti 2000. The stealership had replaced both of them 10,000 km ago (With garbage obviously). I wasn't going to go and see them again. Your video convinced me I could do it. I watched a few (Vids) and yours was by far the best and was my bible. It was work but I am proud of the work. Drive so nicely now. No more horrible noise when turning a corner. Thanks again
@hardlymovingpro5 ай бұрын
Thanks for sharing and glad it worked out for you!
@Atonement-2 жыл бұрын
U really put out the most clear & comprehensive stuff at appreciated speed... Slowing down exactly where it needs more detail too ... Good stuff man.
@hardlymovingpro2 жыл бұрын
Thanks for your post and support!
@nikjohnson32273 жыл бұрын
Great vid. My '04 Maxima with 310K miles thank you. Completed the job myself, my mechanic is not happy with you. Cheers!
@hardlymovingpro3 жыл бұрын
Good to hear! 👏!
@kevinsnelgrove40782 жыл бұрын
You know he’s a PRO when a tough job looks easy, especially the passenger side CV. Knows just where to apply leverage deep in the bowels of the suspension. Super impressive.
@hardlymovingpro2 жыл бұрын
Thanks!
@riddledtomcat13603 ай бұрын
Hands down, the best video for this out of all the others.
@hardlymovingpro3 ай бұрын
Thanks!
@jfruser2 жыл бұрын
Dude, you saved my bacon on this repair! I have both the Chiltons and Factory service manuals, but there were a few wrinkles your video ironed out nicely for me. Many thanks for helping me get my daughter's 1998 I30 back on the road.
@hardlymovingpro2 жыл бұрын
Great to hear and glad it helped you out!
@stephenbay95644 жыл бұрын
Great video....step by step. I also noticed you used duck bill pliers for the cotter pins - which I see as a great idea. Amazing that a vehicle that old had the 3 tough areas fairly loose.....the pass. side bearing (not rusted in place), and BOTH sides had the axle splines just slide right out. I never get that lucky! Thanks again....I really like you style of video, with crystal clear, steady pictures!
@hardlymovingpro4 жыл бұрын
Glad it was helpful!
@DarkestofTimes7 ай бұрын
One of the best repair videos Ive seen
@hardlymovingpro7 ай бұрын
Thanks for your support!
@dropjewlz4 жыл бұрын
I feel confident after watching this video thank you
@hardlymovingpro4 жыл бұрын
Thanks ... and good luck with the repair!
@jking38922 жыл бұрын
WOW , what an Awesome video!!! Man you made this so direct and un-complicated that I can't believe it,, some other KZbin videos were making it way too complicated!!! Thanks
@hardlymovingpro2 жыл бұрын
Glad you liked it!
@Ken-1 Жыл бұрын
man bro, just subscribed. Clear and concise repair videos are a rarity nowadays
@hardlymovingpro Жыл бұрын
Thanks for the sub! Appreciate that!
@on-site40944 жыл бұрын
Awesome video 👍 you deserve more subscribers no fluff or marketing pushing products you just get it done thanks for sharing
@hardlymovingpro4 жыл бұрын
Thanks ... appreciate your post!
@ruthmendoza79623 жыл бұрын
Nice vídeo, i feel comfortable doing it on my own now.
@hardlymovingpro3 жыл бұрын
You should! Go for it and good luck!
@ExtremeRecluse2 жыл бұрын
I will be doing a lot of work on my 1999 maxima soon. 2 front bearings, struts, sway bar bushing and link, tie rods, control arms, ball joints, axles and complete brakes.
@hardlymovingpro2 жыл бұрын
Sounds great!
@flaviosampaio91918 күн бұрын
What a great video thank you it helped me
@hardlymovingpro17 күн бұрын
Glad it helped!
@johnbeard13243 жыл бұрын
Awesome Video, really gives a good picture whats at hand in doing this job. Q: 2006 FX35 Just pulled the front Passanger Side CV Axle....the Clip Stayed inside...LOL Will need to pick up extended needle nose plyers....to get the clip out.......unless someone has another idea. Thx!
@hardlymovingpro3 жыл бұрын
Thanks! Haven't worked on a FX35 but wonder if the clip is suppose to remain inside.
@elgatogordo95234 жыл бұрын
Great job as usual! 👍 Keep them videos coming...
@hardlymovingpro4 жыл бұрын
Thanks! Will do!
@jamesadams85722 жыл бұрын
Awesome thanks man saved me a nightmare
@hardlymovingpro2 жыл бұрын
Glad to hear it!
@oskarkarrera3 жыл бұрын
I just noticed the Channle Name 🔥🔥🔥🔥 HardLy Moving With A Vengeance. Thumbs up tho.
@hardlymovingpro3 жыл бұрын
Thanks!
@ChanKe3 жыл бұрын
Man I definitely can do it now! Thanks!
@hardlymovingpro3 жыл бұрын
Glad I could help!
@oskarkarrera3 жыл бұрын
Ok SEE this GUY is gud Man. People other CID channels our outher & suck, Pay attention to this guy, cause I do.
@hardlymovingpro3 жыл бұрын
Thanks!
@evanepp4 жыл бұрын
Awesome video thanks
@hardlymovingpro4 жыл бұрын
Glad you enjoyed it
@Sroor900103 жыл бұрын
Good job man 👍👍👍 Iam doing it the same way and I've seen rarely doing it infront of camera the point and aim when I learned this is how to remove the axle from gear other things are easy and all you tubers are cutting this part 😂😂😂 and continues and when you ask they are saying it took long time this, this and this, shi--- what a f--- and no good answer untill my brother showed me how to do it and he is diyer not a mechanic thanks goodness that iam doing it myself And I've seen that You are doing it the right way but why you keep it untill it shot 😅 Mean you are not checking every 6 months so if boot need replacement just clean grease, change the boot and grease it and you are done instead of keep changing with aftermarket, if you can fix it fix it
@hardlymovingpro3 жыл бұрын
Thanks and you've made some great points!
@psmith68522 жыл бұрын
one o f the best ive seen for this maxima driver side,the only bad design is that brake hose clip. ,do you haft to have both side jacks=ed up to incert the drivers side c v axel?
@hardlymovingpro2 жыл бұрын
Thanks! Only the service side.
@kev_g37x2 жыл бұрын
I’m trying to decide if I should go oem or aftermarket for the axle
@hardlymovingpro2 жыл бұрын
Cardone, Trakmotive, GSP & APWI are all good aftermarket brands.
@martins41184 жыл бұрын
Nice video! So just to be sure, you put the jack stand on the frame rail on both sides of the car?
@hardlymovingpro4 жыл бұрын
That is correct. Frame rail is best OMHO.
@martins41184 жыл бұрын
Hardly Moving Productions Where would you jack up in the rear on this particular vehicle?
@ceezauto2133 жыл бұрын
Great video. How have these axles held up so far?
@hardlymovingpro3 жыл бұрын
So far, so good. No problems.
@jaywilliamson5463 жыл бұрын
Was this Infinity a Manual transmission or Automatic? I was looking at the FSM and for automatic transmissions it states to: “ Insert a screwdriver into transaxle opening for right drive shaft and strike with a hammer.“ For Manual transmission: “Pry off drive shaft from transaxle.” Thanks for your input.
@hardlymovingpro3 жыл бұрын
Automatic. You may have difficulty sliding the cv axle center bearing from the support hanger due to corrosion. May have to use a screw driver or punch and hammer to pry/push it out.
@sivucit4 жыл бұрын
Excellent Video. I always had bad luck with aftermarket cv axle, which cause vibration when accelerating. Do you know any tips.
@hardlymovingpro4 жыл бұрын
Avoid store brand rebuilds or just buy new ones. Try sticking with reputable name brands.
@Sroor900103 жыл бұрын
That's why I have a habit to look on my boots every 6 months and check, and since then iam just greasing and changing boots once there is a crack even if it's minor I hate waiting for a disaster to happen 😂😂😂 If you can fix it and save your axle do it its only grease, boot, also pry bar and ratchets special plier for the c clip and you are done 👍👍👍
@hardlymovingpro3 жыл бұрын
Coating the boots with silicone or dielectric grease will help preserve those boots.
@Sroor900103 жыл бұрын
@@hardlymovingpro great will do it 👍👍👍
@hardlymovingpro3 жыл бұрын
@@Sroor90010 happy motoring!
@kevon2413 жыл бұрын
I have a question. I have a camry and around the speed ranges of 40 or 55 I felt like a shudder vibration when I accelerate and when I have my foot on the gas at one of them speeds steadly. Could it be the cv axle or the transmission?
@hardlymovingpro3 жыл бұрын
Believe it's the axle
@prodigymanny98394 жыл бұрын
I drive a 2011 maxima and I just don’t know what my problem is, I had a bent wheel I replaced it, it got rid of a little vibration at lower speeds, but still The same 70+mph my car starts to vibrate like crazy, it bothers she living hell out of me, I’m thinking it’s either a bad strut , control arm or the cv axle joint
@hardlymovingpro4 жыл бұрын
Whatever had the force to bend the wheel probably messed up the cv axle (internally)
@sheilaholmes11154 жыл бұрын
hey did you ever figure this out
@moresoundd Жыл бұрын
My bracket is stuck for some reason, i was able to pry it open but it won’t spin
@hardlymovingpro Жыл бұрын
Could be too must rust build up.
@BLud_Bro_FoE3 жыл бұрын
Suscribed
@hardlymovingpro3 жыл бұрын
Thanks!
@RaJahDathurr3 жыл бұрын
The driver side is always the easiest compared to the passenger side...
@hardlymovingpro3 жыл бұрын
Absolutely!
@fukenjaay3 жыл бұрын
Bro how the fuck did you remove the axle like that so easy out of the rotors mine is stuck
@hardlymovingpro3 жыл бұрын
Here ... check out this video: kzbin.info/www/bejne/ioLWqJZ8aruIicU If it's really stuck bad, use a air or electric hammer chisel with a pointy end.
@rokitman57536 ай бұрын
0
@oskarkarrera3 жыл бұрын
Just subbed tho, so if U can & wen U can save me some money would be great G appreciate the knowledge & hrd work