Adam predicting that the rope will break before the harness was actually hilarious.
@konsey188913 күн бұрын
Can't beat experience 😂
@oDazzleRazzle12 күн бұрын
Dude no way 😂😂
@marcelomoreno74236 күн бұрын
🐐🐐🐐
@vojta9813 күн бұрын
If you guys interested more in these topics, HardIsEasy and HowNot2Higline has many videos regarding the gear and safety
@aaronhauptmann86912 күн бұрын
Brought to us by the man filmed on multiple occasions letting go of the break hand on the grigri. 😂
@gustavograssi13 күн бұрын
I think it would be very interesting to watch a video of any pro climber talking about the use of a helmet. This is so important and everyone is avoiding this subject.
@saketssss13 күн бұрын
Wouldn't say avoiding, most of the climbers climbing really hard grades are often climbing steep overhang or roof. In this situation it's not necessary if you know that falls that you take, will just leave you hanging in the air. Of course it's really important and recommended.
@gustavograssi13 күн бұрын
@@saketssss they don't use the helmet even on slabs so... I think it's more of an "esthetic coolness" thing. That's my guess.
@emilsandbakken690913 күн бұрын
just like in skateboarding, the pros will not use a helmet, or talk about it
@Miha-hq4hd13 күн бұрын
@@emilsandbakken6909 Except one of the best skaters always wearing a helmet when skating streets and everything.
@chyza201213 күн бұрын
@@gustavograssi Even on slabs if you fall properly a helmet doesn't help much, and pros know how to fall. Where a helmet is really absolutely necessary is sketchy trad, and you very often see pros wearing helmets there.
@ryanpenrod185913 күн бұрын
I'm glad people doing these videos make sure we know that 99% of the time we won't be experiencing anywhere near this amount of force. 8kn is bad enough and you'd probably be injured, 10kn is definite back injury.
@NPC-fl3gq13 күн бұрын
We won't, but your anchor/pro might. Something to remember.
@farukbalc59813 күн бұрын
Also make sure to hold the break side of the rope :D
@DomClimbs13 күн бұрын
the better the climber, the worse the belayer
@psybigz13 күн бұрын
let's make this the top comment ! it's such an important topic and adam, even tho you're my climbing idol, you've been showing a bad example !
@uncommonsimon577513 күн бұрын
Yeeesss ! Another video ! Grab some popcorn everyone and enjoy ! Go Adam ! 💪
@nikolaihedler888313 күн бұрын
The carabiner user manual that comes with @mammut carabiners indicates that they should never be tri-loaded nor loaded by the gate, but both of these are possible outcomes when using a carabiner through the tie-in points with a sling as shown at 4:40 in this video. It's unfortunate that Mammut's own engineer is giving incorrect advice so publicly.
@audiojck112 күн бұрын
Probably a non issue. The harder you pull the more the tie in points align and you should not get into critical force territory anyway. So it's probably safer then having a girth hitched sling rubbing around the belay loop, which is not really critical either. I mean this is used to attach yourself to an anchor and not meant to see more than 1kn of force. I use a dynamic lanyard anyway which doesn't tend to cut as much as a dyneema sling
@nikolaihedler888312 күн бұрын
@@audiojck1 the risk of loading the gate is very much present when using a carabiner this way, and when using a static sling, there's much higher force potential.
@audiojck112 күн бұрын
@@nikolaihedler8883 true. Should still be fine for the scenario though as long as it's a locking carabiner. I will keep girth hitching my anchor sling anyway and just stay alert that it is meant for static loads. For sport climbing I use a connect adjust that will cut a bit less due to being a bigger dynamic rope.
@foobar922010 күн бұрын
Yeah, I get the feeling that this is solving a theoretical problem (belay loops do not get cut by a girth hitch under normal loads, not even when falling into a ferrata set with 6kN) by introducing plenty of new issues. Not only cross loading or loading the gates, but also an unreliable screw gate which can easily come undone while climbing. At the very least this should be a tri-lock, better a ball-lock (although Mammut surely won't recommend a Petzl product). This also creates a lot new potential for the harness rubbing against the carabiner
@felipe2fp8 күн бұрын
What about anchor systems when cleaning a.sport route? The girtch is done at the other two loops as a rope is attached, why it does not cut like a belay loop?
@annievoss201013 күн бұрын
Wow! Really interesting information. I love getting to see the behind the scenes of this stuff.
@michaelgrant633211 күн бұрын
Its this kind of content that makes me so happy to have found climbing as a spectator.
@jachymchovanec180313 күн бұрын
Naprosto super videjko :O spousta informací, co bohužel není nikde oficiálně ani pro prodejce, ani pro veřejnost
@michelemaio839913 күн бұрын
We need a collab with HowNot2
@BigToinE9767 күн бұрын
The "level"/depth of this is way lower than what hownot2 does, and I find it quite nice that HowNot2 do their things in an indepedant setup than brands, videos are less scripted than this ...
@paulgaras260613 күн бұрын
I find the suggestion that girth hitching to the belay loop is dangerous to be a bit dubious
@luke-zq6iq13 күн бұрын
i also thought so. I would add that using a carabiner opens the possibility of human error e.g. carabiner is not locked
@Will_Kempkes13 күн бұрын
Idk when a girth hitch would be used in any way to take a large amount of force. Personally only use it on a static Personal anchor.
@IAmMaarten13 күн бұрын
while it's true that it weakens the belay loop by constricting it, that's not really a factor in practice as it is still plenty strong. There is a risk however, and that is that if you leave your sling/personal anchor permanently on your belay loop it sees a lot of wear in the same spot, hidden from view. If you attach it like this you should regularly take it off and check for wear, and reattach in a different spot
@baybaymaus13 күн бұрын
Girth hitch the hard points with the sling. Been doing that for 25 years. No problem.
@NPC-fl3gq13 күн бұрын
@@baybaymaus I do the same (or basket hitch if it's a long sling) and I don't understand why people complain that it's uncomfortable. They say it's uncomfortable because it pulls the tie-in points together, but that makes little sense to me as the tie-in points get pulled together whenever you load the belay loop anyway, and when unloaded the girth hitched tie-in points will relax and open up anyway. Much safer imo.
@bastian617313 күн бұрын
14:32 -> Adam going in his head like "I told you it's the ro-oope. I told you it's the ro-ooope. hahahaha"
@szabolcskiraly632313 күн бұрын
I use an 8mm maillon rapide, the longer one, on my Mammut harness as a 2nd belay loop and I use it for auto belay machines in the gym and for my PAS outside. I've got another one on the back of my harness for backup/bailout. It works just fine. I'm happy with it. It's super strong enough :-P go Adam, go Ryan, go Mammut 😊 keep on sending 😊
@galacticwisdom738910 күн бұрын
Thanks you so much, it is a side of climbing really interesting me, considering how serious any defect may mean ... great idea :)
@plastikmaiden13 күн бұрын
I hope @HowNOT2 will recreate these, so we can see the numbers!
@NovaVelvet-c5i13 күн бұрын
He did a vid on harnesses lately.
@xanhxanh50979 күн бұрын
this is so interesting. what a cool unique look into the materials.
@AWer213 күн бұрын
Yay a new video!
@marianoog_13 күн бұрын
I'm really curious where this will go once Adam retires from the competitions. My guess is a lot of behind the scenes like this one and outdoors.
@Sepp200913 күн бұрын
don't make Michael Bay jealous with all those explosions...
@riddimfernandez513912 күн бұрын
thank you
@ПавлоПетрованчук9 күн бұрын
Hi Adam! Nice video! What model are your pants?
@louisfechoz12 күн бұрын
Mammut could have chosen a better representative for the first section of this video. The people in Hard Not Easy videos are super interesting and their explanations are far more detailed.
@Aaron-xq6hv8 күн бұрын
I thought about that too, but I am sure the guy in the video here could say all of that same stuff, but my guess is this has more to do with whoever "directed" this video.
@the.erdemss13 күн бұрын
Finally new videooo
@asdsa8813 күн бұрын
great video!
@teostrong697313 күн бұрын
Bro it’s been 1 minute
@Hikergy1613 күн бұрын
😂
@AWer213 күн бұрын
Bro didn’t even watch it yet
@zivotvkrosne477913 күн бұрын
Cool!
@clcabral624313 күн бұрын
Brasil here your crazy.
@thibauthentique12 күн бұрын
I don't get why they test the belay in the '' middle'' loop where we belay instead of the top and bottom loop where we actually tie our rope 🤔
@claudiosponta301313 күн бұрын
Cool
@MrWombatLOVE12 күн бұрын
:o jak se teda ma spravne davat odsedka na sedak? takhle pres zamkovku? to jsem u nikoho nikdy nevidel :o a ohledně kN při pádu do lana.. co když spadne člověk špatně do štandu, to musí být víc kN i pádovej faktor okolo 2 ne?
@loniousmonk13 күн бұрын
8:54 Sturzanlage; schöner Fachbegriff
@AB-xv6xe9 күн бұрын
3:40
@onogrirwin12 күн бұрын
How did we get all the way through this video without mentioning 'stress', 'strain', 'elastic deformation', 'plastic deformation', or 'elongation'...
@TehPkaa12 күн бұрын
All those concepts were introduced in this video using simple words. There is no need to go on scientific language and explanations if 90% of the Public does not understand it.
@onogrirwin12 күн бұрын
@@TehPkaa This probably seems out of nowhere, but do you do overclocking? Your name reminds me of someone.
@Monscent12 күн бұрын
I dont think a piece of fabric ever explodes
@MarcusHarrise-l9n11 күн бұрын
Lewis Elizabeth Perez John Brown Nancy
@yodikod618013 күн бұрын
@ktrethewey12 күн бұрын
Why do we need silly background music?
@yellowllorente13 күн бұрын
@HowNOT2 😂
@psybigz13 күн бұрын
sorry my man, they took your concept and watered it down. hold on, you're the best at what you do ;)