When you piece together a hydraulic brake on a minibike

When you piece together a hydraulic brake on a minibike
Installed an inexpensive hydraulic front brake on the Tillotson 212-powered Doodlebug minibike.
212 Ghost kart racing engine playlist - • 212 Ghost VS 206 Brigg...
Mega moto e-bike playlist - • Raced the QS120 e-bike...
Predator 224 playlist - • Predator 224 gets a 26...
Mega moto performance playlist - • Mega Moto 80/105 unbox...
Bonanza minibike playlist - • 1.3 ratio rockers vers...
Coleman cc100x Predator 212 playlist - • Free Predator 212 perf...
Road rebel go kart playlist - • Kart vs scare chair / ...
Coleman cc100x/DB003 minibike micro bike playlist - • Will a Trumpet exhaust...
Coleman cc100x playlist - • Coleman CC100x Minibik...
Doodlebug playlist - • Is the Doodlebug minib...
Coleman CT200U-EX playlist - • Coleman CT200U EX mini...
Azusa minibike playlist - • Is a Ghost faster with...
Coleman CT200U playlist - • Coleman CT200U minibik...
Predator /Tillotson playlist - • Free Predator 212 perf...
Minibike playlist - • Mega Moto 212 goes 60 ...
Subscribe for more minibike content: www.youtube.co...
Instagram - Doubledown555Black66
________________________________________________________________
Parts used
Single piston brake - www.amazon.com...
Don't forget to leave a comment to let me know if you enjoyed this video! :)
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

[@cb175s]

With a front brake it can do legit burnouts .. 👍 Great video Thank you for sharing

[@Black66]

Thanks !

[@SpAcEcruizer203]

2legit 2quit 💪🏼💯💨💨💨💨

[@FreeRunMonster802]

Time for a hot engine to match the sweet brakes!

[@Black66]

Thanks! Yes I want to do that .

[@andrewkuhtz]

Test ur 263 on that frame! And on ur ct200uex!!😎

[@GILSJOURNEY]

Great video I have an old frame I'm rebuilding and also adding a disk brake to it,glad I found this video. Thank you

[@user-ws3xm9up4q]

I did the same on my Azusa with a 10" SSR spoke wheel and disk, Kenda scooter tire, and a cheap amazon hydraulic brake. I had to fabricate a 12mm axle, spacer and bracket.

[@stuch77777]

sweet.

[@NVScrapper]

Good video...I miss you already 🥲😘

[@edgualdino628]

WOW!!! PERFECT YOU 🏆 WIN NICE JOB LOVE THE VIDEOS KEEP THEM COMING

[@edgualdino628]

Keep the brake an bigger wheels coming there not much on the inter web thank you

[@Texastommy23]

Great job I’m attempting to put a front break on my db30 now

[@AdamOpheim]

Link for single piston brake? Don't forget about the regen brakes on the E-bike. Super easy 1 wire ground to activate for most ECU's.

[@Black66]

I put the link for the brake in the description of the video. Its way down at the bottom.

[@crippleguy415]

Those tiny brake setups come with 8MM Banjo bolts instead of the way more common 10MM Banjo bolts . 8MM hoses are harder to find than 10MM . They do sell conversion banjo bolts to adapt a 10 mm brake line to a tiny 8MM CALIPER and or master cylinder .

[@ALMIGHTYGARAGE]

Hey what kind of caliper is that and where do you get your like metal plastic black twist ties that you have on the brake hose holding to the frame love all your videos very clean bikes

[@Black66]

The link is in the description of the video for the brake caliper . I used zip ties from the hardware store to hold the line.

[@insanEPICustoms]

Do you set up a bunch of GoPros around where you want to ride like a new track every time and then try to just miss them all 🎉

[@johnk6346]

All you need is a back brake, The front brake will flip you🤓

[@OpAfAnx]

Yo I got a mikuni carb coming and I've got to order a new throttle cable since mine snapped, do by chance know witch cable I can order for the mikuni?

[@ildefonsomarin6005]

Considering the fact that the coleman ct200u have about the same pipe diameter on the forks as a doodlebug, do you think the front brake kit for the ct200u will be a direct fit onto the db30? I was on gopowersports and it caught my attention and had me thinking 🤔🤔

[@Black66]

I have a video coming out that will answer that question .

[@ildefonsomarin6005]

@@Black66 sweet!! Can't wait for the next video🔥🔥

[@caleb6988]

I have an Arco mini bike that I got when I was 10yrs old. I would like to know what other wheels i can put on it because im running factory wheels. Any help would be greatly appreciated. Front is a 4" and rear is a 5"

[@bcmc5919]

Would you consider making a video on how to install and connect a handle bar mounted kill switch eliminating the factory or incorporating the two together. My DB30 has a Honda GX200 but I assume it’s the same for the predator 212. Thank you

[@ahbenshaut]

awesome collection! I removed the governor from a Predator 212, do I need to replace the flywheel? Thanks

[@KJ-xd8ic]

Where can you buy a doodlebug frame?

[@Black66]

I find them on offer up and Craigslist from time to time. Gokartsusa.com has quite a few different minibike frames.

[@edgualdino628]

Hello what brake fluid does that brake use thanks

[@georgeforeman89]

You might know this already, but I think something like 70% of the braking force on a motorcycle comes from the front brake. So you're probably better off with the dual piston up front. The single piston seems plenty powerful, but yeah. But I mean, as long as it stops well, who cares? Also, I was wondering if you've tried the shiny billet 10" wheels from go power sports? They're really pretty. And I'd love to see you try to do a front hydro brake. They said they are working on a mount for it with the mega moto 80 front forks, like they have with the 6" wheels. But I'd like to see how it mounts with the parts from the 6" kit. Just to see if it would work. the wheels are expensive, so it would be an expensive experiment. Does that make any sense?

[@Black66]

I figured most mini bikes come with no front brake at all. Azusa, GTS ,Doodlebug ,Coleman etc . So any front brake is a bonus.

[@georgeforeman89]

@@Black66 exactly. Something is better than nothing.

[@tbonerare407]

What paint / and color did you use ?

[@jasnilchand869]

What are the name of those sick rims on the bike ❤

[@NickDrinksWater]

I need one of those the stock brakes are horrible lol

[@SpAcEcruizer203]

Aye check the comments I just suggested the pocket bike wheels for him to try out it's crazy round here ... u ask and he delivers ✨️✨️💪🏼💯 like magic

[@cohocarl]

Burnouts with ease. :)

[@danejedrewski6465]

my pads locked together right when i get them how do i loosen them 😂

[@danielpeters8150]

Dude move those footpegs to the middle of the frame. You'll find out the first time they get caught on something n your going at any speed. ( it sucks )

[@Black66]

I think there is around 25 or 26 bikes on the channel at this point.. A few of them have the foot pegs in the front. Check it out lol kzbin.info/www/bejne/o6GzkHVqnd2Fbac