Which Clay in which mold for which project?

As an Amazon associate I may earn commission from links below
My Amazon store here; www.amazon.com...
Large lace cake moulds amzn.to/3HCPniT
Petite Cake moulds amzn.to/3WEOVol
Scraper tool amzn.to/3kQhCkU
Caulk used in video amzn.to/3YkATK3
Hot Glue Gun fine point amzn.to/3jaDQhg
Das Clay *air dry amzn.to/3XFDBcU
beautiful clay moulds amzn.to/3wy6pYP
OK friends, here's our project for the week using Air dry clay and a few other mediums. Caulk? But what type? You can't just use any caulk, see how lovely your decoupage projects can turn out when you use a lace mould that is usually used when baking cakes. That's right, silicone moulds that are usually made for Fondant can now be used on your Decoupage projects, or any craft project! Don't forget to subscribe please and let me know how you like the video. Find me on Facebook at Patioelf too! Cheers! Now go have some fun!
Music by Mr. Jello - Midnight Coffee - thmatc.co/?l=5...

[@lolitabonita08]

i have to say a huge big THANK YOU!! for not using annoying music in the background, what a refreshing experience let me tell you. TIP>>>>to make the backside of the mold flat find a wooden rod (hobby section on Michaels or Hobby L) cut it to size and use it like a rolling kitchen pin but smaller...

[@Yummicookie1979]

You're so right about the music!

[@lolitabonita08]

thank you we all need to start speaking up about that annoying "thing" that utubers "copy and believe" is cool and make the video better...far from the truth..@@Yummicookie1979

[@KMF3]

I absolutely agree about the music. It is my biggest pet peeve with KZbin videos. Music can either enhance a video or it can absolutely detract from it if you don't know how to use it masterfully then it's better to just not use it at all.

[@lolitabonita08]

@@KMF3 the funny thing is when i suggest to kill the annoying music the content creator, aka behind the camera get offended...i guess they never watch their own videos...

[@KMF3]

@@lolitabonita08 I think people just don't like to hear honest feedback. It is the number one complained that I see in the comments and yet creators just do absolutely nothing to change.

[@gwizu3]

Rub with a baby wipe while still in the silicone mold to remove those extra thin bits. Alex Plus is the caulk to use. I bought a case last time because its all I use for castings. Thank you SO much for spreading the word with this video!

[@AndreaStevens2012]

Would you please share the exact caulk that you use? There are a few variations within the Alex Plus line. TIA!

[@gwizu3]

@@AndreaStevens2012 DAP Alex Plus in white. The clear stays too rubbery. And it doesn't mix well with the white nor will it stick to the white if you try to layer them. I ran out of white and finished filling the mold with clear, they wouldn't stay together.

[@SusynStecchi]

I have those sugar craft fondant molds, too, and struggled with air-dry clay. Silicone caulk is a brilliant casting alternative. Thanks for sharing this tip!!

[@chocolatedogs55]

Thankyou, as a beginner i was having all sorts of problems. Not now, the freezer has done the trick. Brilliant. No gas bagging about nothing, just straight into the demo. So much better. So thankyou again.

[@swifty2757]

Best instructional video on how to use air dry clay in moulds. Thank you!!!

[@seascape0881]

I LOVE this video and the info you gave me! I’m wanting to make some doors for my dollhouse that’s missing them and wanted to know how to add details to it and this is giving me some wonderful ideas on how to do it! Thanks so much, new subscriber! ❤️🤗🥰

[@KathyB-m5d]

I am thrilled to have just discovered your channel and this tutorial. I found this extremely helpful and the information and advice you offered are invaluable for making molds. Having tried air dry clay only so far, I was left disappointed in the cracking tendency when drying. The hot glue and silicone caulking are definitely "must tries" after watching your video. I love the fact that the silicone caulking is ideal for lace cake molds. Thank you so much.

[@sandys7118]

DAS Air Dry clay can be removed from the moulds when still wet and can be glues to a rounded surface. You can paint it after you have glued it to your project when still wet as well. DAS can crack but not as much as other air dry paint.

[@kilodeltawhisky1504]

I've used it this way too.

[@annewhite6642]

Can you advise what glue to use when glueing air dry clay to glass - thanks.

[@AlpineArts]

@@annewhite6642depends on what you’re attaching it to, but I use Titebond quick & thick which is applicable to basically any surface. Hope that helps!

[@annewhite6642]

As I mentioned, attaching it to glass, thank you so much, I will give it a try. @@AlpineArts

[@MaryBracken]

Your video is great! Came upon it by accident but now you have a new subscriber and now I want to do moulds too😂

[@joannematthews1284]

I had so many questions about molding and you answered everyone, in a clear way. Thanks so much for this video.

[@lynnpelletier4321]

I'm so happy to have found your channel. This is a very instructive video. I've been using IOD mouldes for years now....and I've never put one in my freezer, I do agree that some of their mouldes are extremely detailed and for those I use resin.....some times I do use a brayer on the back side of the moulde to make sure It's flat.... Thank you for sharing these very useful tips!

[@giorgismama8024]

Great video ! It was extremely helpful! I have some thin molds that I had given up on. I’m going to take your advice and try them again. Blessings!

[@senkabobovcan2356]

Thanks a lot for some information i find out while you talk about super thin mold .You are amazing, thanks for sharing 🙏❤

[@melhaury]

Just pulled out my 1st caulk pieces from molds…wow!

[@bonniefretto2935]

Thank you for all the great info and tips. I just started to play around with molds to add to decoupaged pieces and have been struggling. Such a big help!

[@NicoleLind1982]

OMG! WOW! 😲🤩👍 I'll take a look! I haven't seen such an informative video in a long time!!! Great!!! Thank you so much for this!! When a professional like you makes such a detailed video, it's always brilliant for people who don't have much experience with these types of molds. THANK YOU SO MUCH again from the bottom of my heart!!!

[@patriciashleigh]

The caulking tip is a game changer! Thank you for making this video, my desired application is entirely different from decoupage, but your wisdom is still incredibly helpful.

[@Braedenfish]

Use Alex Plus been using for 5 years on furniture n unused pieces still flexible!😊

[@salliepuckett61]

I have been watching a bunch of video’s and had not seen anyone use those fine detailed shallow cake mold decorations. I was amazed at how delicate they looked. 😊

[@Braedenfish]

It ez.... been doing it for 5 years n I was not 1st.... use Alex Plus. .cheapest at Walmart but all hardware stores have it😊

[@veronicamowbray1902]

So informative- thank you for all the information without the other extra unnecessary chatter.

[@lonarusso3533]

It was a pleasure spending time with you! So Helpful!! Now I know what to use for those pretty bakery molds I just had to buy two years ago! Lol. Thank You!

[@tiaimchen3906]

I have learned to decoupage from you years back, I could recognize your voice after years break... When I accidentally came across your video. Thanks for sharing. Stay healthy and happy❤❤❤ Lots of love from India.. Nagaland .

[@ramyavijaykrishnan733]

Thank you that was an incredibly informative video

[@Jemmyjo]

Very nice of you to share such great tips. Thank you.

[@lindaspaulding565]

Thank you SOOO much! This is exactly what I was looking for. I've been nervous to try using molds and clay but this has really helped!!😊

[@mindysmith-langel6307]

I have only vaguely thought about doing projects like this and you’ve fully opened an incredibly can of crafting worms. 🤠

[@CraftyRocks]

This was so helpful, thank you!

[@sallyh7282]

Thank you so much for these tips. They are going to be extremely useful to me.

[@connietowler3725]

This was sooooo interesting. Beautifully done. The caulking mold looks like gorgeous lace. Who would have thought. Thank you for sharing 🙂

[@sandynuber1509]

Thank you Pati for teaching me/us, what works and what doesn't. The cat jar turned out adorable. Much love from Texas 🤠❤

[@annlyon.2040]

I’m going to try this.

[@ellenl5626]

Wonderful, thank you for sharing this wealth of information!

[@martinebuchet3040]

J’adore!!! C’est extrêmement bien expliqué et inspirant!!! I’m going to try that very soon!! Thank you for sharing!

[@callimachust1474]

I don't really know how I got here but I did enjoy the video so much. Thank you :)

[@KMF3]

On the hot glue molds you could use a heat gun or a hair dryer to soften it up a little bit before you put it on your piece.

[@melbabowen4389]

❤❤Thank you!!! ❤ This tutorial is so helpful!!❤ The acrylic silicone caulk in the thin molds is GENIUS!!!!!❤️❤️❤️

[@sunblest]

Oh! Those paints looks similar to the Pebeo setasilk shimmer range if that helps to find more of what you like for future projects after the Martha Stewart ones were discontinued

[@dagmarrajniakova5209]

Thank you for shating...this video is very helpful for me❤

[@bethdelmonte-catanese6925]

I use a resin that is fast dry it takes 7-10 minutes to dry and its still malleable and it turns white.

[@lsalmon907]

Love these patterns! AWESOME ❤.

[@donnamerino90]

Patti you are the coolest ever! love your videos. My poor husband - I keep buying new things.

[@Jemmyjo]

Tell your husband, he is not alone. Lol My poor husband.

[@lindaczerwinski3312]

Thanks so much for an informative video!! Sure appreciate it.

[@Jade_902]

Thank you so much!!

[@joylynnburkhardt3202]

When I unmolded the air dry clay I used it crackled slightly after it dried on the bottle .. I used cornstarch and it came out if the mold ok .. but I didn’t leave it in the mold very long .. like only 10-15 min before I took them out!

[@lindalary7760]

Love this so much!!! Taught me so much!!!👏👏👏👏

[@lolitabonita08]

the silicone calking is an amazing idea...very impressive..

[@jayjersey9959]

Hello, This video is going to take my hobby life to ANOTHER level!! I have used a ton of "Alex Plus" caulk for all my interior painting. I am so excited about knowing that it can be used for molds as well,and also using hot glue! This info made my creativity go wild! 🤔 I was just wonder about the one mold you use? The dark grey one at the 2:50 part of the video? Any info on company, and or any info on that type of mold would be greatly appreciated. Thanks so much for sharing your amazing work. ...J...

[@rolliecrafts255]

Very nice 👍! Thanks for sharing.

[@jmarie20111]

Great video so helpful to me as a beginner

[@annewhite6642]

Very interesting and informative - thank you so much x

[@LovinglfDesigns]

Use gloves with E6000 glue. I used it for years with jewelry but suddenly started breaking out in hives and a red rash even when using gloves. I was always careful to use it in a ventilated area but I still developed an allergy.

[@rebekahaguillon4475]

So cute. Great Ideas. love love

[@KMF3]

Could you use Dollar tree spackle to put in those really delicate fine lace mold?

[@silviawachter7440]

Wonderfull tips, Thank you 🙋‍♀️🇨🇭🌸🌸🌸🌸

[@lindaking2629]

EXCELLENT video! Thanks so much.

[@norinemueller4588]

Great video I used the wrong chalk and can’t get it out of my mound which is a cake mound lol

[@KriRama]

Great video! Very informative. TFS!

[@glittermama]

I really miss the Martha Stewart paint also. I particularly miss the gold and silver.

[@sandradanforth8524]

Thank you so much 😊

[@truthbetold4178]

Thank you, Patti! This is so helpful. 🌹🌺 Btw... What pearly top coat did you use on the jar?

[@rrutaba]

Hi. I have never seen such an informative video on making clay molds. Plz make a video on how to apply aur clay on fondant silicon molds. I have a stock of fondant silicon molds & I want to avail it. Thank u 😊

[@saltlifegull4091]

Outstanding! Thanks a million:)

[@carrienifhoughlu892]

Hi. Thanks for the great tips. I’ve used the Mad clay and find it very brittle much to brittle to put on furniture. I’ve had it crack and chip on me. I’m wondering did I get a bad batch? I’ve used glue and resin also but love the clay for layering but unfortunately won’t use on furniture as it’s not robust enough. Could you recommend a clay that is? Someone suggested using a product called bondcrete on clay to attach it to wood but I’ve not tried this yet. I’d love your advice. Thank you.

[@radmomx4]

There are the little plastic pieces that you can use on toothpaste tubes- they can help u on the caulking tubes- you slip it on the bottom; and fill it up as you go; making the caulk come out more easily

[@candaceleuchter9645]

What kind of glue do you use for Das clay for glass jars?

[@VoiceofHope2024]

Can I use silicone sealant instead of silicone acrylic caulk ?

[@ala-f9c]

Which weight do you use for elastic lace?

[@kekeboo2375]

Amazon sells her paints and the silicone caulks come in different colors.

[@sandrabiscarner9587]

Could you use foam clay for those thin molds?

[@aileenjacques9771]

How do u feel about paper clay, light weight clay or foam clay?

[@Ann_LovesCats]

Thank you for the great info. I am just starting to play around with clay. Btw, what top coat did you use? You mentioned a pearly top coat.

[@cheekymonkey2]

Glitter nail polish

[@ik020mokum7]

What kind of silicone caulk do you use??? I have tried this also before bit sooooooooo sticky😢

[@dinabird2602]

Thank You.

[@ruthbrown-eubanks9093]

Thank you so much for sharing all of this. It is definitely going to come in handy I can't wait to get a lot of the stuff. Again thank you🥰

[@Indianaparadise]

Thank you ❤

[@beritbranch2436]

wonderful

[@elizabethmccormack5174]

I wonder how glass bead jell will work in the molds.

[@graceparton6491]

3:25 please let me know the stuff u used in that mold. Thank you

[@AA-hz6rf]

I used Alex plus and THEY ALL bubbled. What went wrong?

[@justinaharrison7146]

Can u paint over the hot glue moulds ??

[@AA-hz6rf]

Yes no problem painting hot glue

[@garyyoung4905]

❤,can you use pva glue?

[@lindasanford3324]

The glue gun is no longer available and Amazon doesn't know if or when it will be available. Can you recommend another one. I can't wait to get started on molds. Thanks

[@shabbybeauties58]

I have tried everything and it never comes out right!! 😩

[@AndreaStevens2012]

Curious...why do you say to not use 100% silicone or acrylic caulk? What is the reason behind using the blend? This is the first I've heard of using calk at all (great idea for larger projects for sure!) so I am just wondering why/why not. Thanks!

[@brandied.7706]

100% Silicone caulk adheres to Silicone molds & ruins them

[@LeticiadeGomez]

What is the best adhesive to use to affix the acrylic-silicone caulk lace casts to bottles? Im thinking hot glue or E6000 might fill in the spaces ruining the lace effect....

[@kilodeltawhisky1504]

Not sure how well this will work for the lace, but it works for air dry clay that's still "wet".. I use "triple thick". I think if you paint it onto the surface in a thin layer, then lay down your molded piece, it should work great. I get it at Michaels.

[@Melissa0774]

Are there any types of clay you can use at home that are similar to ceramic clay? I don't want to use it for decoupage projects. I want something that I can use to make doll tea sets, but something that's harder and nicer than sculpy clay.

[@kilodeltawhisky1504]

Try das.

[@Melissa0774]

@@kilodeltawhisky1504 What's that?

[@Mariazinhasousa11]

MARAVILHOSO !!!

[@maudyjellema5314]

Hoe heet de klei

[@februaryangel1]

TYFS 💯

[@gretatillett1100]

Maybe "thank you for showing". I also get muddled with abbreviations ❤

[@nomanejane5766]

❤

[@diamondheartrajugoudar2718]

👌✨

[@AndreaStevens2012]

First time viewer here...this is a good video in terms of all the helpful tips you provide...but what's with the speed? Just from the title I assumed this would be a learning type vid therefore it is okay to take some time to explain &/or demonstrate. For example, using a rubber band to hold the clay in place is genius! You shouldn't rush through such tidbits...don't assume that all viewers know what you know...people who already know this info can either enjoy the refresh or not watch if they are concerned with the length. Hurrying through such content really is not helpful. Please consider slowing down a bit when doing tutorial type vids. Thank you for your consideration and for sharing your knowledge!

[@annaorthodox4653]

You can adjust the playback speed in the Settings button on the bottom right of the video. So you can slow the video to 75% or 50% of normal speed.

[@AndreaStevens2012]

Yes, thank you...I am aware of how to control the playback speed, which I di. However, my point is, you still do not mention some of your movements, i.e. the rubberband. Again, brilliant idea, but you just put the band around the clay and jar and didn't say what you're doing or why. This is what I meant when I said, please don't assume that viewers know what you do. You might do this all the time, but it was a first for me. Anyhew, the actual speed of which you speak is not the issue, I was asking you to take time and explain details such as the band as you go...you know so much and since you're making vids, I assumed you wanted to teach. No worries. I'm sure you have plenty of followers and newbies like me are incidental. Thank you for replying. Best of luck!@@annaorthodox4653

[@EloahFalcão-b2h]

👋👋👋👋👋👋👋👍

[@kim99may]

“CAULK” not the other word! Lol I Don’t think you have to spell it out so someone doesn’t think you mean the other word. Haha 😛

[@perpetualfond]

🩷