WHICH DELTA CARTRIDGE DO YOU HAVE HOW TO REPLACE A DELTA CARTRIDGE

WHICH DELTA CARTRIDGE DO YOU HAVE
HOW TO REPLACE A DELTA SHOWER CARTRIDGE
Delta Tips and tricks
The history of the Delta shower faucet
#RP32104
#rp19804
#DeltaShowerFaucetRepair
RP19804
BUY HERE: amzn.to/36nUoGI
GENERIC DELTA RP19804
BUY HERE: amzn.to/2QFxIvd
RP32104
BUY HERE: amzn.to/2SMzrBx
RP70538
BUY HERE: bit.ly/2Sh8LJf
RP46074
BUY HERE: amzn.to/2FeKafZ
19804: amzn.to/2X1xvW2
amzn.to/38qOCVr
Email: [e-mail]
Instagram @Plumbing_parts
Twitter @Plumbing_parts
Website www.plumbingpartspro.com
**********EQUIPMENT USED TO FILM**********
CAMERA amzn.to/33IR7Au
LIGHTING amzn.to/2q6B8hc
TRIPOD amzn.to/34TU4ON
MICROPHONE amzn.to/2NDXbVn
LIGHT STAND amzn.to/33GHwdH
We Stock What Others Consider Special Order!

[@cristobalarciniega32]

Oh man this is a special video.. Exactly what i need.. Now i know which cartridge i have to buy before i start working on my Delta.. I subscribe.. Very info video

[@stephenmcgovern6198]

If i send a pic of my faucet can you tell me what cartridge id need?

[@carolynwolfe5023]

Thank you for your video. I couldn't even begin to fix my leak until I found out what kind of assembly I have first, and I was able to find out through your video. Just to let everyone know, I had a little drip leak out of my tub spout and called a plumber out to give me an estimate. He didn't turn the water off, and open it up to see anything, but just looked and told me he had to replace the cartridge and it would cost $275.00. I thought that sounded outrageous, so I again turned to youtube. I am an older lady with arthritis, so if I can do this, anyone can! I watched this video, and found out I don't even have a cartridge in my set-up! I have the first one, the one with a ball and little spring and rubber do-dad. I found the spring and rubber set on amazon for around 5 bucks. Today, I turned my water off and started to open it up and used pliers to grab the old rubber and spring out and inserted the new ones and put everything back on. Ty so much!

[@malibuman8941]

Very cool.

[@debraivy9943]

My house was built in 1970. I had no idea where to start. Delta website didn't go back that far. Thank you for explaining and telling exactly what I need. Beyond awesome!!!

[@donaldrippetoe5246]

This was really helpful! We had a leaky shower that was getting worse and we were to identify the correct parts and make the repair. Deeply appreciated!

[@desiraehermann3454]

I agree with a previous comment you received..."You are doing God's work!" (And you probably didn't even know it...lol). Thank you for your informative video sir🙏 As a landlord for the past 25 years with numerous Delta faucets in units and trying to keep track of it all, this video has been SUCH A BLESSING! You rock brother!

[@MaRieLnAtiOn]

AMEN for this video. My house was built in '99 and Delta's website does not have my shower handle even listed. LIFE SAVER!

[@PlumbingExplained]

Dude this is a great video! on the Delta Nuts though when they freeze on there your best bet is spraying them with some CLR or that WD 40 rust/corrosion release stuff and then using a strap wrench ive been able to get every single one off using that method without having to cut them and we have terrible hard water with chloramines in it out here in southern California. Very informative video though man keep it up!

[@bqthird]

You should make a video showing how to do that. Would really help alot of people.

[@jasonspencer6990]

One of the issues is people using channel locks on them. They end up egging the ring and then it’s a bitch to get off. Try spinning it with your hand and a rag to grip it with. If you use channel locks dont grip it real tight. Easy does it is best. If it fails cut it off.

[@rudolphferdinand3634]

My house was built in 1995, it has a Delta shower faucet system using the ball the old type of system. Now I know what to buy, thank you.

[@jessehobart7021]

This video helped me buy exactly what I needed and fix the faucet on the first try.

[@PlumbingPartsPro]

awesome thanks for watching

[@manwithears355]

Thank you.! Very great rundown on all the different types of Delta cartridges. I was able to run to town and grab what I needed without shutting down my main supply. Great video and explanations.

[@2009439]

This was such a great video and so helpful for a single elderly woman, I think if I get correct parts I can repair my leaking faucets. Thanks for posting this wonderful video.

[@siege78]

Whaaa-Hoooo!!! Thanks guys!! Lifted a major burden off my mind! Especially the pressure balanced part- couldn’t figure out why I couldn’t get any water out of the spigot with only the cold side hooked up, now I know! And I likely won’t have to replace anything, just get the hot side going! 😀😀 BIG thanks!

[@01surge24]

Thank you for the discrimination of the rp19804. Old verses new. Colors being different. Helped a lot

[@terrycindyian]

Helpful video. This cleared up things that the Delta video should have covered better. Now I know I don't have to look for a "seat & spring" kit as it is already inside the cartridge that I need.

[@MonseyReader]

Thanks for answering my email within 15 minutes at 10pm! Exactly what I needed

[@josevega4111]

Thanks. Your information/ demonstration saved me a costly call to the plumber. Outstanding info video

[@GustavoPereira-xg4pi]

Fantastic comprehensive demonstration on Delta faucets, keep up the great work!

[@juliann317]

Had no idea the delta cartridge comes apart but twisting it. Gotta try this on the broken one I have. Thanks

[@drm7552]

Appreciate this! I was trying to figure out how to know which cartridge I needed, the pre-2006 or post-2006, and come to find out I DON'T need a cartridge, I need the Delta ball that you described. Thank you for your great description of how to tell which I needed! Do you feel it's pretty easy to change that for a novice?

[@noahlanders0422]

I just want to say you’re an absolute legend thank you so much

[@johns1159]

Excellent! No nonsense technical info. Nice job!

[@richbaalman7362]

So I bought a new delta shower system at Lowe’s to replace the old system and as you know, the valve cartridge’s are different! Of course they are!! Is my only option to replace the main brass valve body in the wall or try to find a shower system that uses the same cartridge? The current cartridge looks to be like the last in your video and seems to be a shallow mount? The new cartridge is like that longer version you showed with the two distinct sides of hot and cold… house was built in the 2009 and this is the original. Thanks so much for the guidance! The best….

[@captainsergeant]

Great video, explained exactly what I needed to know to get my Delta shower cartridge replaced.

[@2sohx]

I just replaced one of these today. If the round nut holding your valve in place won't come loose here are the methods I tried. 1. WD-40 or LIthium Grease. 2. Two pipe wrenches, didn't budge. 3. Filed a slot in the top of the nut for my flat-head screwdriver to fit and attempt to tap loose with my hammer, didn't budge. 4. I learned calcium builds ups inside the nut. I took my hammer and lightly tapped around the entirety of the nut a handful of times to attempt to break up the calcium deposits. 5. Tried with the pipe wrench a few more times, it finally budged and loosened up. When you go your local hardware store with your existing valve to match up for a new one ensure you also purchase Plumber's Grease. You will coat the O-rings of your new valve with the Plumbers Grease to slide into the fitting easy. Without the Plumber's Grease I could not seat my new valve completely into the fitting. Good luck!

[@billybull1139]

Thank you sir for you & your absol' invaluable video; You made parts buying a breeze for me here recently &- This is one of the best vids ever to hit YT... Because of its usefulness... Thank you a million times over again‼️

[@DavidRomero-ne5qs]

Very good explanation Thanks for your time and dedication to help people.

[@crestallana14]

This is very helpful, just wondering if you have a video tutorial changing dual handle to a single?

[@TomwithaDream]

Very informative and helpful. I wish there was more content out there like this for us DIYers. Only thing to suggest would be to grab the up close shots of your pieces (if you have more content showing detail shots) separately and drop them into the video. This would require video editing software to ome degree, not sure if that is practical. The problem is your lighting is great for your dialog shot but is totally blowing out the details on the pieces being so close to the light. You can make out the details you are describing but only barely.

[@odiberzbn]

Thank you very much for this excellent video, I have problem with stuck nut I can't move it , for delta tow hands faucet ,

[@StevenZHerman]

10:05 RP70538 you say the longer bonnet nut is not usually needed, but the part RP75852 is discontinued. What bonnet nut will work with a new Peerless RP70538 cart. The body is Delta B112900 thanks.

[@worldview730]

6:21, you can also use WD 40 & let that soak in. But after these valves have been in for some time with all that calcium & hard water build up, everything just freezes up so one may just have to do with a cartridge replacement. I wish they would do with out these Allen wrench handles I would prefer the screw type as the Allen nuts are hard to access.

[@dablackguy830]

Thanks this was a great video to help me identify what carriage I will need for my delta shower. I don't have the leaking that most videos I have seen are referring to what I have is the hot water doesn't last very long but I will have hot water at all the other faucets in the house. Im using my automotive background and assuming that the spring on the hot side is weak and just gets over run by the cold be water. From what you have mentioned in the video I have the 1700 series.

[@PlumbingPartsPro]

amzn.to/340Nqf6. Here's the cartridge, if there's a lack of hit water the cartridge must be replaced due to the pressure balance portion failing.

[@chanshendry5617]

Great video thank you for making.

[@eduardodedios8213]

Muchas gracias por este video, me ahorraste $175.00 Thank you very much, you saved me $175 on a plumber

[@partytony69]

I have a job where I have the Delta ball, but it has a little guide pin inside. And the only ball I can find a fitted is the replacement for the sink faucet. 😔

[@TOOSP0RTST3R]

At 8:40 you need to note that the blue one is wider also. I ran in to that problem with replacing the blue cartridge.

[@NanuqoftheNorth]

Very informative video! Thanks for posting.

[@richsouthall1937]

This is a great video; thanks for making it. You made this effort so much easier to understand for a DIY guy like myself. I can move forward with the repairs now with more confidence.

[@mandylee3713]

This was exactly the video I needed, thanks 😊

[@oscarpow]

That’s the video I needed! Could you please indicate the part numbers of the first (oldest) valve (the ball with rubber and springs)? Thank you so much!

[@Dorkbike]

Sorry, but the popular RP19804 is different from its replacement RP46074 in not only length of cylinders going into the valve body, but the cylinders are spaced differently as well. I learned this the hard way when trying upgrade my single handle RP19804 with a 17 series cartridge. The newer RP46074 in your video has cylinders closer to eachother, when compared to RP19804, and will not fit into original valve body. This is visually apparent even in the video. I'm still not sure if my RP19804 single handle can be upgraded to 1700 series dual handle cartridge or not.

[@PlumbingPartsPro]

That is correct the RP19804 and the RP46074 are different as I mentioned in the video. They Do Not interchange. Also the valve body for the RP19894 will NOT accommodate a 17 series cartridge. You are pretty much stuck with the RP19804 until you change the valve body with the newer multi choice body which will fit the RP46074 or the 17 series. If you have any other questions feel free to contact us. Thank you for watching.

[@Dorkbike]

@@PlumbingPartsPro this is what I thought, in order to upgrade I will need to replace the plumbed in valve, bummer. Thank you for the reply.

[@Noor-fx2bb]

Thanks for the video. I changed the delta valve cartridge but still there is leaking from the showerhead. Do you have any recommendations for what to do in this case? See 5:30 minutes.

[@krmhayes2893]

I don't know which cartridge I need, faucet has control for water temp, and an on/off lever as well. It was installed in the 90's. Any idea which cartridge I need? Thanks!!

[@michelevyas5353]

Delta gave me one cartridge. It went in but it was a nightmare to get it to go and then they're saying it's a different one and they know the picture of my faucet. They know everything the year everything. I don't know how this happened. Even been a hardship to get this and who knows. Now the one that they say it's not. I got it to work but I don't know if it's going to damage anything

[@khoale3083]

This is an awesome video. I struggled to find Delta parts at Home Depot last night. I wonder when the time comes, is it easy to replace the old bath faucet with a brand new one all together, with a small hole behind the circulate plate? Thank you.

[@robharfman5754]

Thanks for info, this helped me find exactly what I needed!

[@joelewis2351]

Excellent video! Thank you.

[@Sky-jj1cv]

You can replace the seat and springs in the 19804 successfully, but you have to have the correct new spring. The seats and springs must protrude like the new ones to have correct tension.

[@PlumbingPartsPro]

I have had mixed results changing the seats and springs, even using Genuine Delta parts. It also will not resolve any temperature or pressure imbalances it may be causing

[@Sky-jj1cv]

@@PlumbingPartsPro I agree it won't solve the pressure balancing issues but if you turn the handle off and it continues to drip you can get the actual Delta seals and the actual Springs I believe I could find the kit number for another faucet but it has the correct Springs and seats in it. I even had success using a aftermarket seat and spring if that number is danco 80465 the springs are slightly longer than the others it makes for a good seal. If I remember correctly the "scald guard" springs are the correct ones but double check first. A spring that sits under constant tension eventually wears out. The best solution is to replace it. There is more going on inside the real delta one than the two springs and seats. However the DIY that doesn't want to drop 50 bucks this go around for a drip on shutoff. Can stop the drip for about 4 bucks from local hardware store. Remember those seats and springs are not specific to that model. Delta uses alot of the same seats. But the springs are not all the same.

[@fedora5926]

I have a B510LF single handle bathroom faucet. Uses the ball, seats and springs and a seal cap on top. I bought a Moen kit because most of the parts looked identical. I used the parts that looked the same but it still leaked. Are Delta and Moen interchangeable for some parts?

[@mr.williams7911]

I like your videos. You have me thinking hard about the pro press

[@peterklemkowsky6683]

Rp46074 cartridge: why do both of the bottom valve connections keep popping out of the cartridge? The cartridge is only a few months old. When the end pieces come off, the valve leaks. Is this problem with this cartridge type?

[@jugalsharma8151]

Very good information thanks a loy

[@dianeduceymusic4547]

Very informative! Question(s)... I have a Delta shower cartridge from the late 90s (probably the RP19804). Does this mean I have a Delta Rough In Valve too? And if so, does this mean I have to stay in the Delta family if I want to replace/update the faucet? Also, do you recommend replacing the cartridge even though it seems to be functioning just fine? I will say it seems like Delta model options are more limited with this particular cartridge (it's a moose!).Thanks! Dd

[@lisbethbasnuevo7195]

I know we have written to each other but can’t find it, but I need help taking out the old cartridge I already bought the new one please help me?

[@caresselopez5319]

For RP70538 cartridge, is the check value assembly RP73625 needed? We had that with ours, but we don’t have circles for shower valve rough in depth, the shape actual matches the end of the cartridge so I’m wondering what it’s for.

[@gregorydemeaux2988]

Can I use the Delta Porter shower cartridge with my existing rough setup? I will be using the new handle, face plate, and cartridge but don't want to mess with the rough connection. My old setup is Delta with a separate water temperature control and the new combines the flow and temperature.

[@christopherw6309]

Very helpful! Thank you!

[@Loel65]

Delta scale control single handle faucet 45 yrs old what would be the replacement cartidge, can you advise? Thanks

[@joshpatrick6266]

My house was built in 1983. What cartridge am I most likely to have? Set screw is corroded beyond unscrewing. Want to know what I need to have before I have to possibly damage the old cartridge.

[@joshpatrick6266]

The ball handle also rocks up to turn on and then left and right for hot/cold and rocks down to turn off.

[@spencerakashaggy5599]

Have shower handle , thinking 1700 Delta ? Handle is dual a large cold , smaller for hot , both hard to turn or off .

[@Star_Dust___]

Could you please tell Me what cartridge do i need for Delta T17494-SS ?

[@CyclingVa]

Very informative thank you. I will check out the website

[@PlumbingPartsPro]

Thank you, let us know if we can help

[@Josieundergrace]

Are those cartridge interchangeable? I have 1500 or 1700 series cartridge (double twists, on and off, and hot and cold water), but like to use 13 series. Thank you.

[@king_invictus]

If I take out the gray can I got back with the blue? Or go back with the gray??

[@alexyourczek2714]

Do you know if it's possible to replace a delta 1700 series trim from 2003 to a modern 1400 series trim? Or am I stuck with 1700 series trim?

[@sldemby]

So if your shower no longer produces hot water does the cartridge need replacing? I have hot water from the sink in the bathroom just not from the shower.

[@PlumbingPartsPro]

That is correct

[@sldemby]

Plumbing Parts Pro thx! Your video was a life saver.

[@johnkauchis8384]

great info may want to work on lighting every time you hold up a part close to camera it's whited out

[@IGIT2011]

Thank You

[@joejones8009]

I'm trying to change a 1700 series to a 13/14. Do I have to do something internally??

[@DLStarbuck]

Big thanks form Maiu.

[@GM-yq5wk]

Omg u may of saved my bacon..I see the asse1016 p delta on the brass ring..trying to change cartridge as shower head leaking...which cartridge can I buy if you know thanks..house built 1988..I have managed to get most of the hardware off..but turning water off now..lol I forgot to

[@goshrx]

One question which I don't think this video quite covered, but came very close. I have a Delta Monitor 17 multichoice series and I think the cartridge needs to be changed because the temp in the shower sometimes, maybe 10% of the time, just randomly slowly creeps up. It was installed in October 2016, so it's not very old and there's just my wife and I using that shower, and the Delta manual for that trim (says I need a Delta RP46463, which it also says replaced the RP32104. Does that sound right to you? I am seeing conflicting information on the internet, and don't want to get it wrong for obvious reasons. Very helpful video, but it didn't quite address this issue. If you could confirm, that would be awesome. TY!

[@rickfeckers8104]

Could you give me a part number for the cartridge I probably need before I start dismantling. Also I'd like to purchase the retaining nut for the cartridge. If you have a store I'll buy directly from you.

[@rubendawn7478]

Why after replacing the cartridge the water flow diminshed considerable, I didn't use a Delta cartride, I use a Danco brand, does it had to do with the flow? Can the flow be adjusted? Anybody knows? Thanks in advance.

[@waynelaniuk8745]

Great video. I ordered a Delta Tub and Shower P. When I got it I see it longer than my existing one as you showed. Is that a problem as the original 2 bottom channels are shorter but it did show P. Can I use it in the existing plumbing ? You were very informative Thanks

[@PlumbingPartsPro]

Send us a picture of the old and new items and we can help [e-mail]

[@timcanon5167]

Very helpful!

[@kennyg3192]

Hey brother, I have something just like what you just showed that last Cartlidge but mine has a piece on the end of it that has two like built-in spring bodies that come off of there and I can’t match my Cartlidge

[@PlumbingPartsPro]

Email me a picture [e-mail]

[@rainerrain9689]

Now I'm really confused, Delta says the 1700 series is cartridge RP46463, and you didn't mention this model cartridge at all ,help?

[@PlumbingPartsPro]

The RP46463 is the newest version of the 17 series. Dark Grey cartridge. You are correct, it's not in video. When it was filmed it was fairly new and rare that this part even needed replacement.

[@rainerrain9689]

@@PlumbingPartsPro Hi, well guess what, I've been emailing Delta today {yes they work Saturdays to 7pm est} and sent them my info {wasn't sure I had the newer model or the older model 1700 series } and picture ,turns out I have the older model {I forgot when I bought it} and need the RP32104 Cartridge and they're sending it out to me for free, they stand by their lifetime warranty for residential ! PS:Thanks for the reply .

[@EquitySolutionRayRaz]

Is there a retro for delta to go from having both tub/shower outlets always having pressure to having them diverted individually? It’s crazy you can’t use both outlets separately if not . I grabbed one thinking the “temp adjustment “ was diverted tub/shower so I can run hand held separate out the tub side and it’s sort of silly they wouldn’t have the option of shower/tub built in like so many other brands . Although i don’t do a ton of Delta so maybe they do ? That’s the golden question here lol appreciated

[@PlumbingPartsPro]

If I understand correctly what you are trying to do, you must use a transfer valve

[@EquitySolutionRayRaz]

@@PlumbingPartsPro it wasn’t a question of what I need to do , but rather a question of whether something exists.

[@edwardupton3082]

Do you have photos of the different valves, especially inside where cartridge inserted? Cannot find anything to identify valve. Thank you.

[@PlumbingPartsPro]

Email us a picture and we will try to help. [e-mail]

[@lhidalgo9999]

Hi there , l can’t seem to take out the nut . I’m scared to use too much pressure. I don’t want to mess up the pipes in the back . I was thinking about cutting the nut . But to replace it , is going to take a while . Especially ordering the nut online . Do you have any other ideas or suggestions ?

[@PlumbingPartsPro]

Take a 2" rubber fernco coupling. Slide it over the nut and tighten the stainless band. Try to unscrew

[@waltahlgrim5508]

Did miss where you covered the thermostatic cartridge RP47201

[@PlumbingPartsPro]

Thanks for watching... The cartridge you are referring to is an extremely rare and extremely expensive cartridge that is Not installed in most homes. I covered the most common cartridges in the residential industry

[@mikemaid5350]

Where do you get RP22734

[@stevemadak6255]

Great video, thanks! Delta are idiots for continueing to make new cartridges one after the other. 80% of the parts section is Delta cartridge stuff. So dumb

[@toltec13]

My shower cartridge is a Delta with a dual handle (back and front stocky handle). The problem is that it's difficult to turn the water on and off. The plumber installed the entire shower faucet about 4 years ago (2015). What cartridge can I have?

[@keisharichardson3947]

So I have the ball. My faucet is leaking and I'm not sure to remove the cartridge, to get to the ball, to replace the seat and spring. I was told feels doesn't seem this lot anymore. What do you suggest?

[@PlumbingPartsPro]

If you have the ball type, remove the front dome style but carefully. If it's tight you may need to cut it off and replace the nut so it doesn't ruin the valve body. After the nut is off all the parts should pull out

[@RhondaSharpe-t7p]

I had a local handyman replace the crystal ball handle with a more model faucet. I am being told by a licensed plumber that I cannot replace the crystal ball faucet with a new style without cutting the wall and replacing the valves. Any suggestions? The cost is upwards of $800/per bath. My crystal ball bath was installed in 1985.

[@PlumbingPartsPro]

The plumber is correct the older 80's style faucet has a different valve body and can not convert to the new modern style. 800 sounds slightly high but it all depends on the area market you are in. 600-700 is probably average in most areas unless your in a major city like NY, Chicago, California etc.....

[@RhondaSharpe-t7p]

Thank you! @@PlumbingPartsPro

[@composer1663]

I have the old Delta shower arrangement, with the seats, spring, and ball. Is it possible to replace that cartridge system with a later one, without changing the basic plumbing behind the wall?

[@PlumbingPartsPro]

No you can not use the cartridge style in the older 600 series valve.

[@princesunnyboy]

I didn't see mine, you showed with 2 flat side and 2 round side on the copper part, mine has spline all around, where the single handle fits.

[@PlumbingPartsPro]

There is only 1 Delta I am aware of that has a spline. Its an all brass cartridge used for the high volume faucets with body sprays. This cartridge is discontinued and no longer available. Send us a picture to our email for us to identify. Thanks for watching

[@princesunnyboy]

@@PlumbingPartsPro thanks for your reply, I'll send you the model number.

[@princesunnyboy]

@@PlumbingPartsPro good morning Sir, I finally found the model # of my delta shower kit. Delta B114900 thank you for your advice.

[@codybynum2012]

Does each of these cartridges fit in any delta valve?

[@andrewmusquez6208]

I replaced my cartridge and months later it leaked again . Any idea why ?

[@johnhender]

Great video

[@martishkintrud]

Your video is very helpful. Thanks.I just changed the 19804 to 1400 faucet. Do you have any idea how to convert it to 1700 series/two handles without replacing rough body valve and braking the wall? Nobody can tell me so far. Your answer would be greatly appreciated 😊

[@PlumbingPartsPro]

So if you originally had the RP19804 cartridge it is older that 10+ years old, therefore you have the old valve body that WILL NOT accommodate at 17 series cartridge. If you had the newer universal body with the RP46074 then you could convert to a 17series with an adapter.

[@martishkintrud]

@@PlumbingPartsPro Thank you very much. I was hoping for miracle! But... You doing just right thing - education for amateurs. Merry Christmas and Happy New year

[@jonigibbs6223]

We just bought a new shower faucet that is a single handle and comes with we believe a RP46074 cartridge (based on your video). The old faucet was a dual handle and had a 1700 series cartridge. The new one is longer and doesn't fit....what are our options?

[@PlumbingPartsPro]

Send us some pictures of what your working with. [e-mail]

[@princesspranaya7123]

First of all thanks for the nice video on youtube. I liked it. Recently I brought a condo and saw the bathroom faucets are leaking and had a handyman replaced the cartridges. I think we replaced the Danco one's that were the only ones available. But it just worked for a couple of months. Now I see the problem happening again. Water is dripping from the faucet. I have replaced the glass cap with a steel one from Menards. So what I would like to know is can I go to the next model and replace it, will that fit? is that an option? if not what are the options? My current model is: Delta RP1991 can I replace that with RP19804 - white or gray one? Awaiting your reply Thanks

[@miztrusa]

I dont think you can since its a different lenght.

[@flamingomtn]

This is a great video but it didn't address my particular shower. My Peerless has a handle that lifts to start the water and then goes left and right for temperature. Any clue which one I need?

[@miztrusa]

Um if you listened to the first valve he described that sounds like yours.

[@romeomadriaga2500]

hi..sir, Is there available cartridge delta asse 1016 masco in market online, or any replacement compatible for my leaking faucet, thank you !!

[@macrichardson7904]

Great video thank you. A few questions. My shower head is leaking at the head position, not the water control valve position. Does this still mean that its a cartridge issue? We have a dual knob shower control. It appears that I need the RP32104 model. Does it matter what specific delta unit I have? We purchased this home so I don't know the model. All i can do is send someone a photo of it in hopes they can identify what I have and what I need. thanks for your help and information

[@PlumbingPartsPro]

if its leaking from the shower head, it's coming from the cartridge for sure. Almost all Delta shower faucets take the RP4993 Delta seat and spring set. Make sure you get the Genuine Delta brand and not a generic Danco brand part. The genuine part is a better quality rubber. Sometimes the faucet will still leak and the cartridge must be replaced. you ca n email me a picture to help identify the faucet.

[@macrichardson7904]

@@PlumbingPartsPro Thanks for the info and fast response. I spoke with Delta and he told me I most likely don't need to replace the cartridge, I should just need part # RP28603 which is some quad spring unit. Does this sound right to you? I also checked and my local Home Depot and Lowe's don't carry Delta parts. Can I order from you? thanks Mac.

[@miztrusa]

Its still the cartridge issue

[@semimba]

thanks -- great video

[@tweetiebird]

I'm confused can you interchange these different cartridges?

[@PlumbingPartsPro]

No they fit specific faucets. The only ones that interchange are the one with the newer multichoice valve body