A big "thank you" to Chuck, a very talented machinist, who helped me put together the test approach. He gets credit for everything that went well, and I get the credit for any mess ups. Sorry it's taken me a year to get to this one but wanted to get it right the first time. Thanks again Chuck! Products Tested In This Video (in no particular order): Bosch: amzn.to/32h9Kfh Craftsman: amzn.to/2EoL7Fu DeWalt: amzn.to/32dr7hl Harbor Freight (Warrior): bit.ly/2CLXwTg Harbor Freight (Bauer): bit.ly/2Qb1ece Ryobi: amzn.to/3gjOcE7 Walmart (HyperTough): www.walmart.com/ip/Hyper-Tough-15-Piece-High-Speed-Drill-Bit-Set-3431/196625192 Milwaukee: amzn.to/31gwxIU Metabo: amzn.to/3j4dcAR Masterforce: www.menards.com/main/tools/power-tool-accessories/drill-bits-accessories/masterforce-reg-titanium-twist-drill-bit-set-21-piece/5332/p-1497525447647.htm Black & Decker: amzn.to/2Yo3YYc
@nicholasdrum14665 жыл бұрын
Try making a cylinder out of JB weld
@bubbafudpucker3975 жыл бұрын
No industrial brands??????????????? Only homeowner junk????????????????
@JayzBeerz5 жыл бұрын
Dude you're a legend. You need your own TV show.
@bubbafudpucker3975 жыл бұрын
@@JayzBeerz Agreed!!!
@twilight_foxbody73545 жыл бұрын
I would love to see a test on circular saw blades! I’m a construction worker and use them almost every day!
@Jay-Jose5 жыл бұрын
This channel is one of the true joys of KZbin.
@ProjectFarm5 жыл бұрын
Thank you for the kind words!
@stevethea52504 жыл бұрын
@@ProjectFarm you should use Centigrade plz and include Metric
@amgoose90324 жыл бұрын
He actually help us unlike other youtubers advertising us something expensive that works like trash
@taxicamel Жыл бұрын
@@stevethea5250 ...do the conversions yourself. .
@HomeSteadingHomeVideo5 жыл бұрын
My 8 year old son stopped to watch this video with me while i had it on. He asked what you were doing. I told him you were testing drill bits for me to see which one was best so i dont have to do it. He thought that was very kind of you. I am very thankful myself for all your videos. They are very informative and save me time. Keep on doing what you love my friend! We all love it!
@ProjectFarm5 жыл бұрын
Thank you for the kind words!
@chrisallen60105 жыл бұрын
Kids are awesome.
@paskvale655 жыл бұрын
Yep, so true
@MikeAguiar4 жыл бұрын
That’s so sweet. My son and I also watch these kinds of videos. Then we walk into the garage and build rockets lol
@HomeSteadingHomeVideo4 жыл бұрын
I'll check it out! Thanks for the inspiration!
@sethbrown59354 жыл бұрын
You ever wondered what dads watch when everyone else is sleeping? Well look no further because this is it
@ProjectFarm4 жыл бұрын
Glad to hear! Thanks for watching!
@tazvt4 жыл бұрын
Well ummm just because everyone is asleep and I'm watching this doesn't make it true. Maybe I watch this when they are awake too lol
@leviv75214 жыл бұрын
I’m 16, but not a dad lol
@CoenBijpost4 жыл бұрын
Levi V good for you!
@theoutsiders4ever834 жыл бұрын
Hey I ain't no dad, and I watch this daily lol
@tomferrin11483 жыл бұрын
These kinds of unbiased tool tests done by Project Farm are priceless to me. They cover tools (like the drill bits in this video) that span a range of prices, so I can pick a brand and level of quality that matches my pocketbook for the particular tool I need. Sometimes I'm looking for a tool that I only need to use occasionally and sometimes I'm looking for something that I'll be using everyday. Either way I can find the answers I'm looking for here. A big Thank You to Project Farm!
@ProjectFarm3 жыл бұрын
You are welcome!
@taxicamel Жыл бұрын
This video was a lot of good work, but completely missed out on two of the more important aspects, TOOL GEOMETRY, and WHAT the drill material PURPOSE is for. The ONE feature not emphasized was the "split point" feature. This one aspect alone IS important. The other geometry feature is the drill point angle. Standard drill point angle is 118°. Alternative angle is 135° often used for harder materials. Also important is "web thinning" and "rake". This is a matter of simply looking at the tool bit set BEFORE purchasing. None of this was even mentioned in this video. Then the drill material was skipped over with no explanation ....yet it seemed that "cost" was more important. Well, if you're not going to provide any information about drill material or "coating" ....and in particular "SHARPENING" .....then this video is fundamentally only for people who need a drill every five or six years .....for wood. .
@TheHouseofChameleons Жыл бұрын
That's me.
@is73524 жыл бұрын
This man does a great public service. Thanks mate.
@ProjectFarm4 жыл бұрын
You are welcome!
@panan77773 жыл бұрын
@@ProjectFarm I've been working with metals for over 50 years and I'm also a mechanical engineer, which helps a lot to understand the problems. I have several solutions, not found in the books, that I'm willing to share for free. You have much broader reach that I have the time to develop. How can I contact you?
@definitelynotluna63953 жыл бұрын
@@panan7777 he probably has an email that has project farm in the address
@MrCube17Ай бұрын
Totally agree
@EbenVisher4 жыл бұрын
I *love* it that you talk fast. It help to get through a lot of material quickly. Your videos are engaging beyond belief! Thank you *so* much.
@ProjectFarm4 жыл бұрын
You are so welcome!
@aerialrescuesolutions32774 жыл бұрын
Well edited too. it cuts out all the blah, blah blah, and gets right to the point. Jim
@ststst9814 жыл бұрын
Agreed. Some people talk so incredibly slow and I have to up the video speed, but he just delivers a good steady fast stream of information
@daddybdpearson13 жыл бұрын
I just wish there wa a note that list the best tool, without having to rewatch the whole video again. I know a lot of mechanic that just go with the brand name for all their tools. Some times a different brand might be better.
@deelanders61323 жыл бұрын
Really classy comments here gang. PF is for this new homeowner an absolute blessing. I feel assured when I make purchases for paint, drill bits, ratchet straps, my wife's Bosch icon wipers, that I bought the best. How do you place a value on that knowledge? Thanks PF, and you guys for being great.
@ianrutkosky24012 жыл бұрын
As a blacksmith who make knives and tools with hardened steel, I figured out which bits were best by trial and error. Bosch is definitely my go to for most medium to high carbon steel and DeWalt are the ones I use for mild. Even though they are the best, they do wear out pretty quickly when you're doing a lot of hardened steel. Two things help... Don't let them get too hot and use something like a drill doctor to keep them sharp. I have saved tons of money on bits using my $50 Drill Doctor. You won't get factory results, but you can definitely sharpen old bits into very functional bits. When all of that fails, you bust out the carbide bits, which are about $15-$20 a bit. They will go through anything...
@ProjectFarm2 жыл бұрын
Thanks for sharing.
@SavageDarkness Жыл бұрын
I know this is an old comment, but if you are still around, I have a project where I need to modify some table saw wings to fit with a table saw with different hole spacings. The wings and table are cast iron. Should the Bosch work well for that project?
@yg7059 Жыл бұрын
@@SavageDarknessyes just use a lots of cutting oil
@jeffcard3623Ай бұрын
No, cast iron is easy to drill and requires NO lubrication because of the graphite contained within!
@ginsengjin5 жыл бұрын
I swear, it's like you know exactly which tool i'm going to buy next..... This channel needs more recognition.
@ProjectFarm5 жыл бұрын
lol. Nice! Thank you
@kadenjohnson10725 жыл бұрын
I was shopping for drill bits this morning to go through leaf springs for a project I am working on. This video just saved me thirty bucks!
@waynesgrid495 жыл бұрын
@Sven3xs so what will u buy?
@waynesgrid495 жыл бұрын
@@kadenjohnson1072 what did u buy?
@waynesgrid495 жыл бұрын
@hotrodd100 hyper tough is walmart
@roscoe4545 жыл бұрын
whats the best drill sharpener?
@ProjectFarm5 жыл бұрын
Great test idea! I'll do it if there's enough interest. I'll check back to see how many likes this comment receives.
@-Viceroy-5 жыл бұрын
Eyeball to measure and a wheel grinder (+and some trial and error to master it)
@1pcfred5 жыл бұрын
Experience offhanding the tool is the best twist bit sharpener. I bought a whole box of bits for a buck and boy did I get some practice then. But you do have to know what you're doing. If you don't dress the wheel for instance you're using you're done then before you've even started etc. You can't sharpen a twist drill very good on some hooped out rounded over and worn up grinding wheel. They need to be flat and sharp.
@joshrepik5 жыл бұрын
I’d love to see this test!
@tcmtech75155 жыл бұрын
A good finer grit grinding wheel and a good eye backed by experience. It's the only thing I have ever trusted for going on 30 years.
@curt149k5 жыл бұрын
As a machinist no one would be more likely to criticize this video. All I can say is thanks and you did a great job with the test. You also provided good drilling advise.
@ProjectFarm5 жыл бұрын
Thank you very much! I've held off on this video for over a year since I wasn't happy with the original test setup. A very talented machinist "Chuck" visited the shop and helped a lot. He gets credit for everything that went right and me for everything that isn't. Thanks again!
@ZippoVarga5 жыл бұрын
As a machinist, you know that a full pilot hole should be drilled prior to drilling with larger bits. This was the only criticism I have, as most home shop do it your self types are not aware of this practice. Also, chip breaking, but again, I revert back to the general do it your self type. Otherwise, it shows which bits will handle "abuse" better than other brands, which will help the weekend warriors. Cheers! Zip~
@AndrewR21305 жыл бұрын
ZippoVarga exactly especially larger bits pilot holes are recommended but if your rushing or are lazy as you said shows what bits will take the abuse better
@curt149k5 жыл бұрын
Rian Callahan Agreed Rian, my comment was based on the target audience of the video.
@gilbertdirt5415 жыл бұрын
@@curt149k hola me llamo es walter. me gusta calabaza yo soy grande calabaza chico
@RVCrazy3 жыл бұрын
The Dewalt drill bit's seamed to do pretty good, Since Dewalt has so many kinds I'd like to see a drill bit comparison with black oxide, titanium, black and gold and cobalt bits all compared. Dewalt has all of those types available. I'd also like to see a drill bit comparison between Dewalt pilot point and split point with both drilling speed and bit life. Thanks for all your hard work.
@ProjectFarm3 жыл бұрын
Thanks for the suggestion.
@jokermaness3 жыл бұрын
Kobalt drills are the way to go imo. Suckers last for a long time and can be resharpend
@jual-rakid3 жыл бұрын
Its 14, and the others have 20+ its more expesive than most
@terry78932 жыл бұрын
Same thing with Bosch, they have different levels of drill bits too.
@AlexanderMason12 жыл бұрын
I would love to see exactly that!
@shayanshaffey5 жыл бұрын
This is a quality channel. The gold standard in terms of honest titles and enjoyable videography alongside narration by a knowledgeable host.
@VitorMadeira5 жыл бұрын
Yes. I totally agree.
@wantsanewvehicle5 жыл бұрын
Yes pleasee
@ProjectFarm5 жыл бұрын
Thank you very much!
@andybub455 жыл бұрын
I thought he was going to say: "lets see how long drill bits can be run in a lawn mower's crankcase before the engine blows up" Great video!
@gwarrichmond62325 жыл бұрын
Now....that would be a great video !!! 👍🏼
@ProjectFarm5 жыл бұрын
lol. Thank you!
@Colorado_Native5 жыл бұрын
"That's some serious damage."
@wheelstandr5 жыл бұрын
LMAO!
@jamesplotkin46745 жыл бұрын
@@wheelstandr OMG, now at night, I'll hear Todds voice and all the familiar phrases. Maybe he needs to make a bunch of sound bites. Ring tones, or entry greeting.
@BarbaryStudio5 жыл бұрын
KZbin must give you an award for best channel of the year 2019 and you realy are the best channel with very good fair comparison without sponsors
@ProjectFarm5 жыл бұрын
Thank you for the feedback!
@shawnrogers85715 жыл бұрын
@@ProjectFarm now lets compare feedback and see whose best
@DENicholsAutoBravado5 жыл бұрын
@@shawnrogers8571 very funny! That'd be so subjective. Lol
@watershed445 жыл бұрын
@Project Farm You are one of the best and most worthwhile channels on YT or any other video site for that matter. Merry Christmas to you, your family, and all the subscribers to Project Farm!
@sshort21 Жыл бұрын
Great videos. Project Farm is my first go-to YT spot to check for reviews on tools/things I need to buy. Thanks!
@ProjectFarm Жыл бұрын
You are welcome! Thanks for watching and subscribing!
@utubeaccess75 жыл бұрын
Yes, after destroying countless drill bits in my youth, I finally learned how to drill metal about 20 yrs ago, high force, low speed, lube, back off the pressure right at the end of the cut. Works every time.
@1pcfred5 жыл бұрын
I worked in a machine shop drilling holes all day, every day, day in, day out. After a few months you get pretty good at it. I had this funny way I'd wrap my whole arm in the spider to really get some force.
@joemercieca47945 жыл бұрын
Makes sense. Thank you
@ProjectFarm5 жыл бұрын
Thank you for the feedback
@Hyperian5 жыл бұрын
also true in the bedroom
@ThePerpetualStudent5 жыл бұрын
@@Hyperian Ha!
@ZZstaff4 жыл бұрын
Results at 6:14 12:03 14:27 and conclusion at 15:55 Thank you for another great review.
@romellobo4 жыл бұрын
Thanks, sometimes you just want the results without seeing all the testing. Thanks
@BDCSam4 жыл бұрын
Thank you for linking the results!
@0vomit04 жыл бұрын
Ugh
@g8Words5 жыл бұрын
I just bought the DeWalt set a few weeks ago. Since I'm outside the US, it's time consuming and expensive to import tools and hardware. It's really nice to know I accidentally made a good choice!
@b22chris5 жыл бұрын
Steve S what country are you from that tools are expensive?
@laharl2k5 жыл бұрын
You better check. Dewalt also has cheaper chinese rebrands. Make sure you bought the "expensive" dewalt and not the cheap line. The cheap line is crap and expensive, you better just buy some chinese brand that looks good at least in appearance.
@chloehennessey68135 жыл бұрын
b22chris A set of DeWalt bits like he showed here cost me about $92 American where I grew up. Import fees, taxes etc. it all adds up 😐😢😢
@chloehennessey68135 жыл бұрын
Steve S Please check out a company called Drill America. I have one of their full carbide sets. It was about $980- BUT and this is huge. I’m not constantly buying more and more bits because of wear and breakage. I’ve used the crap out of the 3/8s, 1/2 and 5/8s bit through AR500 steel. The only draw back really is I had to buy a diamond wheel to sharpen them. But I can do a whole armored SUV before having to resharpen a bit. So the initial cost ends up saving me time and money in the long run.
@unodfredy5 жыл бұрын
Those DeWalt bits are really nice. All the diesel techs at my shop use those
@GHOST22x025 жыл бұрын
I requested this test a year ago and I'm glad it finally came. I used to be a machinist and I broke alot of bits in my day. Learned alt from this video. I bought a ryobi and dewalt drill bit kit this black Friday. I was going to return the dewalt. Not anymore lol
@CaptainDangeax5 жыл бұрын
Hi. I bought an oscillating sander (280x110mm pad size) from Rioby years ago. It lasted 20 minutes. 20 f...g minutes ! I returned to the shop, got a refund, bought a Bosch, and went back to work. Personal note : Rioby, although japanese, is worse than LIDL, a german hard discounter. Never buy anything from Rioby again.
@ProjectFarm5 жыл бұрын
Thank you!!
@Promethium6665 жыл бұрын
@@CaptainDangeax Good to know, I had been contemplating buying some Ryobi gear but after seeing how shoddy their drill bits are, i'll make a hard pass.
@chrisp72775 жыл бұрын
Try this same test with non "retail" high end drill bits sets like Triumph, Irwin, Matco Hyper-Step, Chicago latrobe, and Norseman. Also, drill speed is a factor of split point chisel edge design/relief and web thickness. You can always make a drill bit cut faster with a thinner web, but the question is how many of those holes is it going to last.
@ProjectFarm5 жыл бұрын
Great point and thank you for the video idea!
@victorlam601885 жыл бұрын
Don’t forget Walter drill indexes as well
@davidlong57555 жыл бұрын
Matco is Irwin. They just put the bits in a matco case
@MRSketch095 жыл бұрын
I'm just glad you mentioned some "High end drill bits" because.. I was looking for something better than the big box brands... and it was driving me up the wall, trying to find straight forward reviews for great drill bits. I bought these Norseman... glad I accidentally picked a winner? www.amazon.com/gp/product/B001CZH2SK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
@chrisp72775 жыл бұрын
@@davidlong5755 Not since 2018.
@BeginnerGuitarist1014 жыл бұрын
I respect the amount of time and effort you put in this video. Great stuff man!
@ProjectFarm4 жыл бұрын
Awesome! Thank you!
@G_Carter4 жыл бұрын
@@ProjectFarm your videos have become a must watch for me. I have huge respect for the scientific approach you take to testing products. As a result of this video, I have been looking for the DeWalt Black-Oxide bits. It seems that they have replaced them with "Black & Gold" (for example...... look for product DW1177 - used to be Black Oxide and is now Black & Gold). I can't find any information on the purpose for the change, and more importantly I now don't know how the Black & Gold will perform compared to the Black Oxide. Do you have any idea? Thanks!
@BuffaloNickel94 жыл бұрын
Great
@chriscummings7372 жыл бұрын
You saved me hours of time. The Bosch drill bits are the only bits that would get through a bolt I had to drill out on my VW Cam Timing Bolt. They are amazing.
@ProjectFarm2 жыл бұрын
Thanks for sharing!
@willb30185 жыл бұрын
This one of the most useful channels on you tube, especially when you consider the time invested for the information gained. Very high return.
@jackwoodford5194 жыл бұрын
OK this is the 5th video thats popped up for me from you. I know I'm 9 months late here, but hear me out. I can't get over the level of ingenuity you apply with setting up these tests. I'm impressed by the thoroughness of your performance to cost comparisons as well. I'm subscribing and liking and hope your channel grows more so you can keep helping us out with valuable real-world product analysis as well as maybe getting sponsored or some kind of compensation for coming out of your own pocket to buy all these items. Thank you for your work!
@ProjectFarm4 жыл бұрын
Thanks for watching and subscribing!
@jaydaytoday35485 жыл бұрын
This is probably the most informative channel on KZbin. I've learned so much from this channel...
@appads Жыл бұрын
Would love to see a test of smaller drill bits. Specifically, how well they resist breaking. You know, all the empty spots in your drill bit sets ;) Maybe using your torque gauge to see when they break. Great stuff, as always!
@ProjectFarm Жыл бұрын
Thank you for the video idea!
@timetested Жыл бұрын
Second this, I need less snaps in my life and toolbox
@taxicamel Жыл бұрын
If anyone is doing small-hole drilling ....in metal, ....ferrous ....they need to educate themselves specific to kind of work and learn a lot more about tool geometries, coolants, and have the right kind of equipment as well. It is very common for a large full drill set to have the bottom three or four sizes to be empty. These sizes ARE very delicate and they DO break very easily, as careful as anyone can be. IF a person does this kind of drilling regularly, they usually purchase a dozen each of these sizes. .
@tevryan Жыл бұрын
@@taxicamel Yes, I totally agree. Still would be nice to see a Project Farm test to see which ones hold up best for the value.
@ArmedPatriot5 ай бұрын
Yes do it
@WarpedYT5 жыл бұрын
♥️I'm going to keep in mind the speed vs Downward Force, I think a lot of my drill bits have fallen victim to that combination.
@MrTruckerf5 жыл бұрын
I realize I run my drill too fast. Never occurred to me to go slow.
@carpentryfirst30485 жыл бұрын
@@MrTruckerf I don't know... I find if I really push into the drill I can get a hole in a fraction of the time as going at a reduced speed. Maybe at home you wanna keep your bits lasting forever but on a job site time is money. Cheap madtercrafts bits and push like hell. When the .05 -.10 cent bit dulls or breaks, toss it and grab the next. This is the reality on a job site no?
@georgemaragos23785 жыл бұрын
Hi, as someone who uses drill bits at the most once a month, i find to take it slow and easy, some times you need a small push, but i tend to look at the amount of swarth / shavings coming off the job and use that as a guide to my success. Pushing strains both the drill and the bit, sub standard drills with plastic gears will get hot and cheap drill bits will bend / break. So yes i keep my eye on the machinery. Many years ago i worked in a factory that made electrical switches / contact goods ( one of the top 3 components supplier in Australia ) in 240 volt connectors ( plus the larger amperage items in switchboards and commercial environments), Almost all of the work was in brass and every machine had a chart on drill and tap sizes and also the recommended speed and a separate chart on how to set up the belts and pulleys as every machine was set up with multiple belt drives and different sized pulleys of the motor. Regards George
@jamesplotkin46745 жыл бұрын
Heat is the bit's enemy. It seems counter-intuitive, but you need to get the job done in a timely manner to keep heat from growing too rapidly. Keep it lubed, too.
@maestrozero1175 жыл бұрын
Cobalt bits and proper feed rate are great. Always used pilot holes too especially hand drilling steel
@chriswiseman51435 жыл бұрын
I'm always amazed at the thoroughness and attention to detail that go into your tests. Thanks for another great video!
@ProjectFarm5 жыл бұрын
Thank you very much!
@randomuser7785 жыл бұрын
This is some of the very best, no-bullshit, useful, informative content on KZbin.
@ProjectFarm5 жыл бұрын
Thank you very much! That's always my goal. No sponsors (other than generous patrons), not trying to sell anything I test, just provide viewers with an honest test. Thanks again!!
@MonsoonEast5 жыл бұрын
Yes, but I'd take the Bosch bits if you wanted to get rid of them. Thank you very much for the content!
@robc41913 жыл бұрын
This is a great comparison and as a starter guide is unmatched. One thing you might want to look into if you ever revisit this subject is the difference between 118 degree and 135 deg points. The 118 or split points are a better geometry for metals while the 'regular' 135 are more of a general purpose bit. You do great work, man, and i totally respect that you never take sponsorships.
@ProjectFarm3 жыл бұрын
Thanks! Thanks for the suggestion.
@taxicamel Жыл бұрын
Actually, you are 100% incorrect on the drill point angle. Let me repeat .....100% INCORRECT. The very first drill bit in this video is a 118° and very clearly shows no split point. 118° IS the standard "GENERAL PURPOSE" geometry put on most drill bits. These bits generally do NOT have split points. Split point is an added geometry, only of value to those people who know they want it/need it, and don't have a drill grinder that can put this feature in. The 135° is NOT the "regular" point angle. It is an angle that is better-suited to drilling harder materials. It too, is not "split pointed" as standard. There are some bits that DO have a split point, but you have to request it or find products that are already "split pointed". This is the one DOWNSIDE of KZbin. People who make statements, sounding as if they really do know what they are talking about ....yet they've got everything wrong or backwards .....and some people reading the garbage, think they have just learnt something......and now they've got it all wrong. SOLUTION: LOOK UP AND INVESTIGATE FROM MORE THAN ONE SOURCE. If someone has got it wrong, then the next source will probably reveal a problem ....then check another source that is more of an "authority". .
@BulletSpoung5 жыл бұрын
Tie down straps that are easy to use and will hold a load down. I can't find a quality tie down strap that will last for years, not rust or go down hill as you use them, what brand is best PF?
@TheRoadhammer3795 жыл бұрын
are you talking 1" or 2"? I am a flatbed trucker and I use Kinnedyne 2" ratchet straps. These straps see 100,000 miles of hard use, rain, snow and salt, year round. A periodic squirt of wd40 and they work for yrs. If you are looking for 1", try US Cargo online, they carry all kinds of straps for the trucking industry.
@bauminwi5 жыл бұрын
You need Shockstraps! I love them. Worth every penny. Best prices on them at fletcherproducts.com
@JM-yx1lm5 жыл бұрын
The best ones are the cheap pack from harbor freight. Can replace them a year later at little cost
@b.a.lineman75825 жыл бұрын
Take a stroll underneath billboard signs... particularly near major highway in rural locations... the ones the sign guys use to stretch the fabric are real nice and they air mail them to the ground... most never get picked back up.. just sit there in the weeds... only drawback is that I haven’t found one over 8ft long
@ProjectFarm5 жыл бұрын
Thank you for the video idea!
@clivelambert-oe7kg5 жыл бұрын
i love how creative you get to try and make the tests completely natural with no human interaction :D
@ProjectFarm5 жыл бұрын
Thank you
@-Viceroy-5 жыл бұрын
15:43 This should be informed in every drill bit set! I bet 95% of DIY guys don't have clue about correct rpms and forces to apply
@saudade27455 жыл бұрын
Agreed and hands up at being one of those people. Done many a project struggling on like a tit, oblivious to my mistake.
@FarWesternGarrison5 жыл бұрын
Wish I could give two upvotes on this! guess this comment will have to do.
@bertgrau92465 жыл бұрын
Mr. Victory, Agreed, I never knew the correct way to use a drill either. One thing is for sure , Project Farm is more educational than any other teaching video that I've seen Just amazing
@406Steven5 жыл бұрын
@Moto Guzzi This is the first I've heard of it as well. I've always been taught to let the tool do the work and I've broken more than a few drill bits by putting too much pressure on it (usually drilling small holes through metal) so I would apply moderate pressure and let 'er eat!
@laharl2k5 жыл бұрын
I know about it but sometimes its kind of hard when drilling without a drill press. I though i wasnt putting enough force and later on when i bough a new similar sized drill bit i discovered it wasnt me, the drill bit was just crap and the newer one drilled through no problem. :/ If you have good quality drill bits then yeah, follow the sugested speeds and feeds, but otherwise its kind of hard. Best advice would be just try to keep the chips are a good size and constand. The edge is supposed to cut slices not make metal dust.
@kmac81012 жыл бұрын
I've just recently found your channel- OUTSTANDING!! Your ability to convey a multitude of testing variations without occupying an hour or more to do so is impressive. Thanks a lot for your efforts!
@ProjectFarm2 жыл бұрын
Thanks and you are welcome!
@lorenzorodriguez61923 жыл бұрын
I know that having the right tools gets things done faster and efficient . I wish they had videos like this one when I was out there spending $ on tools that would not endure, your giving everyone a hell of shortcut. Great job👍
@ProjectFarm3 жыл бұрын
Thank you very much!
@thomaspattison13975 жыл бұрын
I bought the Bauer set based on what I saw in this video, and I LOVE them! Thank you for this review, very informative. I work as a state inspector and I can't tell you how many times I have had to drill broken off tag screws out. The Bauer bits cut through like butter with little to no flex even on the smaller sizes.
@ProjectFarm5 жыл бұрын
Thank you for the feedback
@tyroonblack9035 жыл бұрын
Thank you for what you're doing on KZbin! You're a reference for us because we know that you won't be sponsored or something.. Keep it up! Love from Switzerland
@ProjectFarm5 жыл бұрын
Greetings and thank you very much! No sponsorship is testing freedom at its finest!!
@ReydioTube2 жыл бұрын
Had to drill into a serious suspension bolt that I sheared the head off of and none of my drill bits were cutting it. Car (Audi 😓) has been sitting for weeks because I can only work on it on the weekend (when it isn't raining 🙄). Bought the DeWalt set ($15!!) after watching this and within minutes, all done, bolt out. Thank you *once again* for your service 🙏
@ThunderbirdRocket10 ай бұрын
Hello ReydioTube , Can I ask you about the process that proved successful for you to get the bolt out ? I see that you used a drill bit but what other steps / solutions tools were required to solve the problem of the sheared off (stuck bolt) ?
@nesvarigi5 жыл бұрын
I recommend to test the laundry detergents - like Tide, Ariel, Persil etc., powders, liquids, caps...
@redline95795 жыл бұрын
Go clean a dish bitch
@Lawnmower-os5pg5 жыл бұрын
Atis R. It would be cool to see which ones get grease stains out of garage clothes best
@Francois_Dupont5 жыл бұрын
yes this please!
@LatitudeSky5 жыл бұрын
Ariel is hard to beat given how well it works and how little it costs.
@nyer0705 жыл бұрын
Please put human feces mixed with urine to test as engine oil. There is a legendary story that a guy was stranded in a desert due to engine running out of oil and he used his own feces mixed with urine as engine oil and got him out of trouble.
@ds2675 жыл бұрын
I have been trying out different Phillips bits for my drills and have been finding that most bits are crap. I would like to see a good bit comparison on who has the best bits.
@bubbafudpucker3975 жыл бұрын
I have been using Wiha brand torx bits for about three years now. They are a German company and their bits last about 20 or 30 times longer than the Dewalt/Irwin/Craftsman homeowner type stuff. Top of the line durability at a good price. I'm using the standard #8 torx for removing 250 or 300 stainless screws before I change out. I was twisting or stripping out the cheap ones about every 10-20 screws. www.wihatools.com/torx-tools/bits/torx-insert-bits/torx-insert-bit-contractor-grade-30-pack
@zwz.zdenek5 жыл бұрын
Testing those will be problematic because the quality of the screws influences them a lot. There are hardened and unhardened screws. A good bit can somewhat handle a wrong size screw. Will it still work if the screw is rusty in the slot? After too little down force and camming out, is the bit still usable? Will it work in a Pozi screw in a pinch? So many intriguing questions...
@ds2675 жыл бұрын
@@zwz.zdenek Just sounds like a bunch of interesting tests to me.
@goodun29745 жыл бұрын
D S, I have been using mostly Milwaukee and DeWalt drive bits, not only with a cordless screwdriver or impact driver but also inserted in a quarter- inch nut driver handle. Both brands seem to have good quality bits in terms of the hardness of the material, but they differ between each other, and certain screws will work better with one brand of bit versus the other. Indeed, I have 2 different styles of 3" long DeWalt Phillips bits (the type with the yellow, rod-shaped "torsion zone"), one marked "P1", the other marked "PH1", and although the drive bit tips look same ( angles, width of the ribs, etc) there is a pretty significant difference in how snugly they fit a #1 Phillips screw.
@johneverson3545 жыл бұрын
I've had the same problem
@Ashley_van_Schooneveld5 жыл бұрын
Lawmower: thank God! They're not testing something on me!
@darkwinter60285 жыл бұрын
“This week on Project Farm, we are seeing if you can run a small engine on slightly used drill bits.” 😜
@ryancostorf51145 жыл бұрын
Are you the guy that sings that shrek song
@jamessmithers52065 жыл бұрын
Wait. The dude from smashmouth?! 🤣🤣🤣
@nyer0705 жыл бұрын
🙄🤤😴
@nyer0705 жыл бұрын
@@jamessmithers5206 more like dude from shitmouth
@Tool-Meister3 жыл бұрын
As usual, simply great! That said, M42 cobalt is thought by many to be too brittle for hand-held drilling. I have various sizes I’ve collected over the years, mostly Irwin brand. I’ve never broken one, but I’m religiously careful when using my M42 alloy cobalt bits hand-held. If you ever redo this test I’d appreciate an M35 cobalt set being included. M35 alloy is considered by many to be a better alloy for Hand-held drilling. Less brittle but not quite as hard as M42 alloy.
@ProjectFarm3 жыл бұрын
Thanks! Thanks for the suggestion.
@Ritalie Жыл бұрын
Do you think using liberal oil or cutting fluid would prevent the chipping of the Cobalt? I've used Cobalt bits dry, and I think it's the dry drilling where the metal basically scrapes and chips. He does a review on this channel of cutting fluid, and "Magic Tap" was one of the best ones, as well as CRC chlorinated paraffin cutting oil, which both had really strong lubrication abilities. The lubrication would probably eliminate all the chipping, but it's just a guess.
@Tool-Meister Жыл бұрын
@@Ritalie I prefer the product “Tap Magic”. It’s simply awesome for my drilling and tapping chores. Lastly, it’s a sad fact many of today’s bits have an awful grind. I often sharpen my new bits before critical use. I find a Drill Doctor makes quick work of both Steel and cobalt alloys. I’ve uses one since the 80’s. I’d say 80% of my drill index has been resharpened, many bits having been sharpened before first use. Regarding Tap Magic: I've been using Tap Magic since the mid 1980's. At that time there were only two formulations, Aluminum, and Ferrous (steel/iron). The proof is actually hand-tapping a few holes with Tap Magic, dry, and other tapping lubricants. The outcome is remarkably in favor of Tap Magic.!
@Ritalie Жыл бұрын
@@Tool-Meister I didn't know if those drill sharpeners were actually useful. I better buy one. So yes, Tap Magic. I think I said it backwards. That's one of the very best cutting fluids because it has very high lubricant properties. In the tests on this channel it performed best.
@MANIAXMATIX Жыл бұрын
M35 has 5% Moly, 6.4% Tungsten, and 5% Cobalt compared to 9.5% Mo, 1.5% W, and 8% Co of M42. I think M35 is harder and more brittle than M42 because of higher Tungsten it has, but also M35 has lower heat resistance due to lower Cobalt content.
@netdoctor14 жыл бұрын
Been shopping for a decent set of twist drills for years, but I never knew what I was actually getting for my hard-earned bucks. One of the most useful videos you've published - at least to me. Happy to support this channel via Patreon. Thanks again, PF!
@ProjectFarm4 жыл бұрын
Great to hear! Thanks for being a Patreon!
@ValuableFather5 жыл бұрын
My grandfather left me a nice set of DeWalt from the 80’s or 90’s I think. I still use them to this day. Good stuff. Thanks for the video!
@ProjectFarm5 жыл бұрын
Nice! Thank you
@daftnord49575 жыл бұрын
i've had a set of the dewalt bits for a couple years. they've survived farm "fabricating" and wood shop really well. Tough box to take care of them too
@ProjectFarm5 жыл бұрын
Thank you for the feedback
@Jasonrotfl5 жыл бұрын
I've had a set of dewalt drill bits and driver bits for years now, and the box they come with is definatly better than the clear hard plastic ones even if I always grab the wrong box lol.
@daftnord49575 жыл бұрын
@@Jasonrotfl SAME i cant believe i haven't written on the box which is which. I just never have a marker when i need one lol
@douglassmith20553 жыл бұрын
This was a great video thank you. Many factors come into play with respect to drills. The actual composition of the tool steel, the machining and straightness of the machining of the drill, the coatings, the final sharpening grind all play a role in the overall quality and lifetime use. Work hardening is a very real issue with drilling, that is why when you drill spring steel you can work harden it to the point where it will dull high speed steel to where it no longer cuts. Stainless is also very susceptible to work hardening, even too much coolant or cutting fluid will cause SS to work harden. Sharp, slow, consistent pressure is key. Slowing the speed down allows the operator more room to make mistakes with feed, before work hardening develops. Cobalt drills are very good for harder materials than HSS, but are more brittle and will chip more easily if chattering or impacted during cuts. Solid carbide is even more so.
@ProjectFarm3 жыл бұрын
You are welcome! Thanks for the feedback.
@metalroofer67372 жыл бұрын
so i had rough go with drilling into a stainless steel door at work. i learned about hardening the hard way today. do you have any advice for drilling through the hardened spots i made?
@slchang012 жыл бұрын
U@@metalroofer6737 Use harder drill bits...like carbide or diamond drill bits...
@taxicamel Жыл бұрын
@@metalroofer6737 not knowing much detail .....can you drill right beside? Can you drill from the opposite side in the same spot? You need more drill pressure to break through the hardened area. Use a smaller drill bit and punch through. Then a larger bit for the same reason, then keep increasing till you reach the size you need. IMPORTANT TO KEEP THE SPEED AS SLOW AS REASONABLE. .
@jonjudice11554 жыл бұрын
You really taught me something today, that explains why I've gone through so many drill bits
@ProjectFarm4 жыл бұрын
Thank you very much!
@derekmaxwell81644 жыл бұрын
Drill bit companies hate him. Lol teaching people how to use bits properly is gonna kill sales lol
@stopxthisxfall5 жыл бұрын
Probably one of the best channels on KZbin... I appreciate all of the effort, time, and MONEY you put into doing this!
@ProjectFarm5 жыл бұрын
Thank you very much!!
@jvandeEi14 жыл бұрын
Great review. I just bought a drill press and went through several brand new 1/2” bits while drilling .125 galvanized tube steel. I had no idea my technique or lack thereof was the problem. Thanks for the tips.
@ProjectFarm4 жыл бұрын
Thank you!! Glad it helped
@JerryWick4 жыл бұрын
R V yup, the bigger the bit the slower you need to go and the more downforce is required.
@franklindavidson91934 жыл бұрын
Best tip i can give for drilling metals. Thicker materials get lots of downpressure and low speed. Thin stuff can run at warp 10. When your chip is really long maintain your speed and pressure. If you get little needles you need more downpressure.
@packinaglock3 жыл бұрын
I drill through a lot of stainless steel and I periodically dip my bits in water to keep them cool. I believe if they get to hot it ruins the heat treatment on them, thus making them dull quicker. A little cutting oil too. Mine seem to last quite a while.
@keithtynan74692 жыл бұрын
I love the videos, and definitely refer to them when making purchases. My only (weak) criticism is that I prefer to see objective measures rather than subjective descriptions. The wear on the bits, for instance, could have been measured using a sharpness test - maybe a low-load twist into wood to see if it still grabs.
@ProjectFarm2 жыл бұрын
Thanks! Thanks for the constructive feedback.
@robert52 жыл бұрын
I thought 10 to 20 holes per bit should have been drilled with a chart per bit showing time from first to last. I can see where that would be a huge amount of work but I still think that should have been done as drilling one hole is no indication of the bits ability to last and stay sharp. I am a machinist and use high quality cobalt bits but was considering a cheaper set I could fit into my bit driver, not just my drill. I think this will help with that but only so much.
@taxicamel Жыл бұрын
What kind of wood? Balsa wood? Why not see what the edge will cut before drilling anything. Maybe it will cut paper. Do you want to be objective or do you want to be subjective???? What would you expect the sharpness to be if you were drilling into cast iron? Researching and educating oneself is highly recommended. This video was a lot of good work, but completely missed out on two of the more important aspects, TOOL GEOMETRY, and WHAT the drill material PURPOSE is for. The ONE feature not emphasized was the "split point" feature. This one aspect alone IS important. The other geometry feature is the drill point angle. Standard drill point angle is 118°. Alternative angle is 135° often used for harder materials. Also important is "web thinning" and "rake". This is a matter of simply looking at the tool bit set BEFORE purchasing. None of this was even mentioned in this video. Then the drill material was skipped over with no explanation ....yet it seemed that "cost" was more important. Well, if you're not going to provide any information about drill material or "coating" ....and in particular "SHARPENING" .....then this video is fundamentally only for people who need a drill every five or six years .....for wood. . .
@jeremyw52315 жыл бұрын
Will we see masonry bits in a future episode?
@ProjectFarm5 жыл бұрын
I'll be very happy to test them if there's enough interest. Hope there are a lot of likes to your question. I'll check back.
@JasonW.5 жыл бұрын
@@ProjectFarm masonry bits on ceramic tile, porcelain, stone, brick, etc.
@Moosetraks215 жыл бұрын
@@ProjectFarm yes
@joshrepik5 жыл бұрын
Yes
@racer2k5x435 жыл бұрын
I’d really like to see this one
@benscott198415 жыл бұрын
The last minute of this video should be watched by anyone wanting to use a drill press. Very informative video well done, and that last bit (no pun intended) of advice at the end is outstanding. Great work keep it up.
@ProjectFarm5 жыл бұрын
Thank you very much!
@Marcoosianism5 жыл бұрын
What's a good tip on how to gauge proper pressure?
@edaker46844 жыл бұрын
@@Marcoosianism you'll know the correct pressure by the shavings. You want spiral shavings not bits or dust. Also, larger the bit slower the speed.
@LeoLeahy5 жыл бұрын
Suggestion: add at the bottom or top of your charts something like "Higher is Better" or "Lower is Better". Sometimes it is really obvious, sometimes not so much, and I think it would be a nice addition :)
@ProjectFarm5 жыл бұрын
Thank you for the feedback
@britjamaine92295 жыл бұрын
But he has his top picks on the podium at the end
@LeoLeahy5 жыл бұрын
@@britjamaine9229 Yup, I know. It's just that I recently found out about this channel and I've been binge watching a lot of his videos for the past week or so. They are great, but there has been a couple of times that I got a bit confused with the results and had to rewind a few times to make sure I got it.
@RubiconV5 жыл бұрын
And a big slide, with huge letters to tell people who are slow or don't listen which is best.
@rtreborg84723 жыл бұрын
The channel always provides a wealth of knowledge and provides a library of information. With winter around the corner, an idea for another project is battery chargers / maintainers / trickle chargers. What is more appropriate for different conditions. If your are storing vehicles over winter, a car, is it best to just disconnect the battery, use a maintainer that can be just clipped on and keep the battery in optimum condition without having to disconnect the battery and lose any previous settings. The effect of different maintainers/ trickle chargers for the multitude of different battery chemistries.
@harleyhawk79595 жыл бұрын
I was doing alittle remodel job, one other guy was also doing the job. he was drilling into 5/8 rough sewn plywood kept going out and sharpening his drill bit. after about and hour he asked for my help, I looked at his drill, it was running backwards 🤔🤐😯🤯
@rustysausage695 жыл бұрын
make something idiot proof and the world finds a way to create a better idiot lmao
@Warriorcat495 жыл бұрын
I'm surprised he even knew how to sharpen the damn thing.
@jkbethune5 жыл бұрын
@@rustysausage69 Amen to that.
@not1but2and375 жыл бұрын
Happens to me sometimes :p
@JM-yx1lm5 жыл бұрын
You made that up. In other words, you lied.
@jamessmithers52065 жыл бұрын
This video was amazing. I assumed there would be few brands, one or two holes each and a long-winded explanation for each. You were thorough, quick, to the point, and tested quite a decent amount of brands on multiple materials. That's how these type of videos should be made!
@jaretsykora88135 жыл бұрын
James Smithers he left some important stuff out in my opinions, compared to what he does in his older videos, and he seemed sorta biased toward dewalt lol
@Ravelo4 жыл бұрын
I'm happy to have such an honest person to watch. I've been subscribed since the lawnmower abuse days. Keep it up.
@ProjectFarm4 жыл бұрын
Thank you very much!
@justinrogers19884 жыл бұрын
Ditto and love seeing you branch out to compare so many different products!
@aerialrescuesolutions32774 жыл бұрын
Lawnmower abuse??? I gotta see this, Thanks for the mention. Jim
@blaznmax88773 жыл бұрын
Dude iam so glad u brought up the speed vs pressure while drilling.. I apply this to basically everything I drill ** but I learned this as a first year apprentice slow and steady +heavy wins the race. Have drill bits last decades
@ProjectFarm3 жыл бұрын
Thanks for the feedback.
@taxicamel Жыл бұрын
Did you get past "first year apprentice"? Cutting speed does not change. It's based on the material and if cutting fluid is used or not. How much "pressure" you use is up to you and the condition and geometry of the drill bit. .
@freddurstsdad21365 жыл бұрын
Could you test hole saws? I go through tons of Milwaukee hole saws and would like to find a better brand if there is one
@GizmosGameLounge4 жыл бұрын
daniel harper kimball Midwest roto kut are amazing.
@freddurstsdad21364 жыл бұрын
@@GizmosGameLounge Thanks, i just requested one of their catalogs. ill check them out
@kentbarger69744 жыл бұрын
Most all the places you go have coded. Drill bits coated drill bits are no good. You have to get pure Cobalt. Drill bits Where the Cobalt is through the whole Steel? Of the drill bit the coded drill bits Do not hold up.
@kentbarger69744 жыл бұрын
Diablo makes a good Sawzall blade I don't know if Diablo makes a hole saw But I know the Diablo. Sawzall blades hold up really good And I Diablo. Skill saw blades are the best. That's all I use is Diablo blades. On my Sawzall and my still sauce. They last the longest.
@kentbarger69744 жыл бұрын
I looked it up on the internet. They do make Diablo. Hole saw I know I've use there. skill saw blades and Sawzall blades they are the best on the market. They last a long time. Much longer than other brands. If I did check this out online and they do make Diablo. Hole saws I just Googled. Diablo hole saws And it appeared on the internet. Hope this helps you.
@boerbrabant5 жыл бұрын
This i really one of the best vid you ever made. I was searching for years for long lasting drils. Maby holesaw and stone drill bits next?
@ProjectFarm5 жыл бұрын
Thank you for the video idea!
@Goatman315 жыл бұрын
Milwaukee Hole Hawg no doubt the winner for hole saws
@opengchris185 жыл бұрын
@@ProjectFarm second on the holesaws! Thank you for doing what you do.
@brycelaing76034 жыл бұрын
I am a CNC Programmer in the Aerospace world and I loved this comparison video. Thanks!
@ProjectFarm4 жыл бұрын
Thank you very much!
@mhmoeller4 жыл бұрын
Then you should know he should have pecked and used coolant on all of these drills.
@hibahprice68874 жыл бұрын
@@mhmoeller When you need to drill a wall or a metal plate at home, will you bring a canister with a cooling liquid and a compressor? )
@mhmoeller4 жыл бұрын
@@hibahprice6887 I would simply use an metal oil can and pump a little bit of oil and water to the drill. Done that alot of times at home. And you don't use coolant for wall drills.
@hibahprice68874 жыл бұрын
@@mhmoeller The video shows that he also uses oil.
@nFlames22 жыл бұрын
Drilling an axle flange on a 6 ton truck was eating each bit I put to it. Ran out of bit when down to the auto parts store & found a Century Cobalt Drill Bit it did the trick for me. I have gone thru several sets of the Dewalt Gold. I may need to slow down my drill & add more weight, Thanks for the teat.
@ProjectFarm2 жыл бұрын
You are welcome! Thanks for the feedback.
@tritech5 жыл бұрын
I'd like to see more of a "how many holes you can drill before the bit is toast" over pure speed. I care more about longevity.
@1pcfred5 жыл бұрын
The bit that drills best drills longest. Unless it just wasn't ground so swift at the factory. Which does happen. A lot of this test was just pitting different grinds against each other. What you really need to do is a hardness test on each bit.
@ProjectFarm5 жыл бұрын
Thank you for the video idea!
@peterwelsh69755 жыл бұрын
Drill that drill COOLEST drills longest. Heat kills drill bits.
@gilbertdirt5415 жыл бұрын
@@peterwelsh6975 hola me llamo es walter. me gusta calabaza yo soy grande calabaza chico
@job38four105 жыл бұрын
Yes that would be very very important, how many holes...............
@KiriRose5 жыл бұрын
This chanel is a blessing to all starting mechanics and DIY(-ers)
@ProjectFarm5 жыл бұрын
Thank you very much!
@shaneleiser79565 жыл бұрын
I would love to see one done on grease. Such as RED N TACKY, SCHAEFER'S, etc. Thank you. Your videos have been solving a long standing problem of knowing what is good.
@ProjectFarm5 жыл бұрын
Great test idea! I've been working on test equipment and some test validation for several weeks. Hope to begin the testing soon!
@bidbudy60615 жыл бұрын
Good idea! Just please make sure to include the TRC Paragon 3000 in the test!
@ImProbablyThatGuy5 жыл бұрын
@@ProjectFarm If you do test grease, you should include Redline CV2 grease
@carterbowe99645 жыл бұрын
Great 💡 idea I would like to see that
@BulletSpoung5 жыл бұрын
Make sure to include both water proof and non.
@chrissteele61212 жыл бұрын
A project for you: When to use what type of drill bit… high speed steel, cobalt, titanium, other? My experience suggests (a) cobalt for metal, (b) high speed steel for everything else except stone/concrete. Titanium seems to be mostly marketing hype but otherwise not particularly helpful, but I may be wrong. For granite - something we have in abundance where I summer - a big Bosch hammer drill (12 amp) and the bits that go with it seems to be the solution. For concrete block, any masonry bit seems good enough for a few holes. Slab cement? Don’t know because I’ve never drilled in it. Forstner bits: For commonly used sizes I spend money hoping to get something better, more durable. For uncommonly used sizes, the cheap ones have proven to be good enough. [Big forstner bits get hot if you don’t go slow.] Nice video, interesting test. Thanks for all you do to inform and entertain.
@ProjectFarm2 жыл бұрын
Thanks and you are welcome! Thanks for the suggestion.
@MadsterV5 жыл бұрын
Why am I watching this? he's so enthusiastic! I should be sleeping and instead I'm pumped about drill bits!
@borys4445 жыл бұрын
MadsterV it’s 3:30 am and I can’t stop watching..
@codelicious65904 жыл бұрын
So pumped to get some drill bits!!
@Mister65 жыл бұрын
I've always been impressed with Bosch's consistent quality regardless of the product
@davemackinnon64875 жыл бұрын
Except for the power tools.. Sir AvE just dissected one and wasn't impressed at all. kzbin.info/www/bejne/gqHJZ2qJZ9Z7Zqs
@ProjectFarm5 жыл бұрын
Thank you for the feedback
@yurik19945 жыл бұрын
I don’t like their automotive applications. More expensive than the rest, but the quality is on the average side
@muhdewd97275 жыл бұрын
@@yurik1994 Like those gimmicky spark plugs with multiple conductors?
@GuruEvi5 жыл бұрын
They have really good wipers too. Whereas the 'store brand' (RainX garbage) lasts maybe 3-6 months before shredding on ice, a Bosch wiper will last for a good 2-3 years. Sure, they're about twice as expensive but I don't have to worry about replacing them.
@joshrepik5 жыл бұрын
Me: I wonder what - Project Farm: I got you, fam. Say no more. We’re gonna test the world.
@ProjectFarm5 жыл бұрын
Thank you for the feedback
@RickSanchezC-on4qe5 жыл бұрын
What plantes the best for habitation? Well find out, we are not sponsored by any plantes, lmfao!
@chadwilliams29732 жыл бұрын
As a Diesel mechanic for 26 years I look and buy everything different because of this Man! Great video and test sir!
@ProjectFarm2 жыл бұрын
Thanks so much!
@tunintunin34175 жыл бұрын
I suggested this a year ago, THANKS SOOO MUCH... MUCH APPRECIATED.
@5PortStudios5 жыл бұрын
I've had those DeWalt bits for about 2 years. I'm really glad I made a smart decision and thank you for confirming it for me. Great Video!
@ProjectFarm5 жыл бұрын
Thank you for the feedback
@Successkid20145 жыл бұрын
Something I'm never interested in: Drill Bits Something I'm intensely interested in when I see it in a thumbnail on KZbin: Drill Bits
@ts92715 жыл бұрын
Mister Niceguy lmao so true
@matthewmoore28393 жыл бұрын
I bought a set of Bosch bits 15 years ago and they still make quick work of any drilling tasks today. Worth the premium!
@ProjectFarm3 жыл бұрын
Thanks for the feedback.
@midias125 жыл бұрын
I use Bosch drill bits a lot for drilling through tool steel they are one of my favorite less expensive bits
@ProjectFarm5 жыл бұрын
Great feedback on the Bosch.
@chloehennessey68135 жыл бұрын
You pay $30 upfront but you can drill 10 times more steel per bit. And it’s free shipping.
@Blb5735 жыл бұрын
Have always bought Dewalt bits. But they seem to be on sale whenever I need them. Glad I’ve been buying the good stuff this whole time.
@edwardmonsariste40505 жыл бұрын
John Lee. It seems like no matter what bit set that I’ve bought, I always go back to Dewalt. They just seem tougher. Same goes for the philips, flat, and square bit Dewalt sets.
@ProjectFarm5 жыл бұрын
Thank you for the feedback
@timjohnson68645 жыл бұрын
I usually try to keep a spare set on hand n try to only by on sale
@twilight_foxbody73545 жыл бұрын
Same here! I was rooting for DeWalt even before the test started
@timjohnson68645 жыл бұрын
@@twilight_foxbody7354 i also only run the regular tip would by the cobalt option but cant find em without the step
@MrLongshot7625 жыл бұрын
Project Farm is a Monday afternoon/evening tradition for me, keep up the good work.
@ProjectFarm5 жыл бұрын
Thank you very much! Hope this helps everyone get off to a great week
@krisnickfffs3 жыл бұрын
I have that same drill press and i had no idea you could change the RPMs... It was handed down to me. I learn something everytime i watch this channel.
@ProjectFarm3 жыл бұрын
Glad to hear!
@stanley_55865 жыл бұрын
Never a “dull” moment on this channel... sorry for that corny “bit”... I will be here all night. Ps: keep up the great work!
@Yonatan245 жыл бұрын
I can bring a few flutes if you're bored and need to be entertained
@gonefilming20205 жыл бұрын
"I will be here all night." ...and please: Try the fish. :-)
@stevealvarez28265 жыл бұрын
Crickets chirping...
@scottlandmcc5 жыл бұрын
Lmao, awesome
@richardgoebel2265 жыл бұрын
Sharp sense of humor
@thedarkness51334 жыл бұрын
You should list all of the products in the description using an Amazon Affiliate link, so that you can get a kick back. That way you still don't have to be sponsored by any of the companies, but can still get something for all the work you do. The least we could do for the information you always provide is to buy the product through your affiliate link, costs us nothing and helps you make more content. I know you have merch and stuff, but a lot of us can't really afford to buy extra things. We could however give you a kickback on things that we already need to buy.
@mmcarts26184 жыл бұрын
I respect the amount of time and effort you put in this video. Great stuff man!
@aerialrescuesolutions32774 жыл бұрын
Very well said, There may be hoops to jump through to do that though? I don't know
@thedarkness51334 жыл бұрын
@@aerialrescuesolutions3277 He puts them in his videos now :)
@thedarkness51334 жыл бұрын
In the description of his videos*
@DawnBriarDev3 жыл бұрын
This is a good idea. However, I didn't realize he was posting these links until I saw your comment and expanded the description. I've been subscribed and watching for quite a long time, but since the videos are always so detailed and descriptive, I've never checked the description until now. If there's a way to mention the affiliate links into the video, it's more likely that people will notice and use them, as I'm sure I won't be the only one. I'll be sure to use those links pretty often in the future, now that I know they exist.
@madmoney34455 жыл бұрын
You never disappoint sir, can't thank you enough for remaining independent and impartial! This channel is a service!
@ProjectFarm5 жыл бұрын
Thank you very much!
@shamblershamfam35973 жыл бұрын
Seriously, one of best channels out there. I have made several purchases based on your videos and have not been disappointed.
@ProjectFarm3 жыл бұрын
Thanks! Thanks for sharing.
@Casey_Schmidt5 жыл бұрын
I would be interested to see how some of the "professional brands" such as Cleveland compare to these more mainstream consumer brands.
@ProjectFarm5 жыл бұрын
Thank you for the video idea!
@stanervin61085 жыл бұрын
Chicago Latrobe. Sandvik. A Swiss made set I owned in the 80's(brand name escapes me at the moment).
@FLYWHEELPRIME5 жыл бұрын
Go get the blue Fastenal twist drill canister as well, those have been my go-to in service trucks for years
@trussandrivets5 жыл бұрын
Cleveland twists and sandviks are what I use
@DavidD-qr2vn5 жыл бұрын
Guhring Walter, OSG, Titex for serious drilling performance
@nimmen5 жыл бұрын
After experiencing the joy of using cobalt bits myself, it's the only thing I use anymore. Good stuff!
@andrewknapp63995 жыл бұрын
You can see with the 1/2 bits that they sometimes took awhile to "get started." I would always pilot drill steel with a smaller bit. Pilot drilling takes the pressure off of the chisel, resulting in a smoother finish and faster cut with the larger bit.
@ProjectFarm5 жыл бұрын
Thank you for the feedback
@G53X0Y0Z05 жыл бұрын
It depends on the type of point on the drill, good split point drills don't need a pilot hole because they cut all the way to center. Standard drills have a negative rake on the center section on the point. A thinner or tapered web will have a smaller portion of the tip with negative rake and cut better. The best cutting drills for starting a hole have what is called a split point, they cut freely with less pressure and don't tend to walk as bad.The split point is made by a special grinding operation that eliminates the negative rake and forms a sharp edge all the way to the point center.
@G53X0Y0Z05 жыл бұрын
I checked the video to see if any of the drills tested had split points, and sure enough the view of the Craftsmen at 2:20 has one, if anybody wants to see an example. The cheap drill at 3:36 has a split point too, but it appears the steel was of poor quality or not hardened properly. Watching the video a little more, I see several with split points, including the DeWalt and Bosh drills.
@heily-38065 жыл бұрын
Drilling a pilot hole is the fastest way to ruin a nice drill bit
@G53X0Y0Z05 жыл бұрын
@@heily-3806 If you drill too large of a pilot hole then the larger drill can try to screw itself into the pilot, basically taking too large of a bite. A pilot that is smaller than the width of the web will usually stop that. Drilling out a hole, say an existing 1/4" hole to 5/16" , can be done without damaging the larger drill if using a machine that holds it back and can control the feed so it doesn't take to large of a chip load per revolution.
@larryb6886 Жыл бұрын
hi, appears the Dewalt Black Oxide is no longer made? they now have the Black & Gold, what are your thoughts on that line? Also, what do you recommend for wood? for masonry? Tx
@ProjectFarm Жыл бұрын
Thanks for the suggestion.
@toddb967 Жыл бұрын
I went to buy the desalt set and found the same! Something changed it’s same model number but black & gold 😢
@radugenis96985 жыл бұрын
It's 12am here, but who cares? Project farm is here
@ProjectFarm5 жыл бұрын
Awesome!! Hope you enjoy the showdown video!
@Zak-ob5ze5 жыл бұрын
Where you from. Its 10pm in the uk
@IN54ANE5 жыл бұрын
Its 2:40 here in califronia
@radugenis96985 жыл бұрын
@@Zak-ob5ze Romania
@charlieboutin33415 жыл бұрын
I enjoy the engineering and systems just to perform the tests. The test results are the icing on the cake. 👍👍 Thank you for doing this for all of our benefit. Happy Holidays to you and your family. God Bless
@ProjectFarm5 жыл бұрын
Thank you and happy holidays!
@FishFind30005 жыл бұрын
Can you add “chicago latrobe” to this test I’d like to see just how well these sets can do compare to a premium set.
@ProjectFarm5 жыл бұрын
Great suggestion
@lrc872905 жыл бұрын
@@ProjectFarm Cleveland also a good brand. As a machinist I assume all the drills were HSS high speed steel except for the Bosch which was cobalt steel. No drills are made of titanium ( just marketing) There are drills with TiN coating which is Titanium nitrite which is very hard and resists wear.
@xenonram5 жыл бұрын
@@lrc87290 I don't think anyone was saying that the drills were made of titanium. They're clearly TiN or TiAlN. Cobalt steel is a HSS.
@xenonram5 жыл бұрын
@@lrc87290 I don't think anyone was saying that the drills were made of titanium. They're clearly TiN or TiAlN. Cobalt steel is a HSS.
@lrc872905 жыл бұрын
@@xenonram correct about cobolt being a form of HSS. I think one of the drill bits tested said titanium. Although he did also mention tin coating.
@firstcross2 жыл бұрын
Your videos are so helpful and informative, and this one is no exception! No nonsense testing, no distracting music, packed with the salient info right to the point... Creative and thoughtful testing methods to ensure consistent conditions, and now... You even have an alphabetical product guide to find videos fast! This is brilliant - I so wish other KZbinrs with myriad vids would do this! Thank you so much for all you do!
@ProjectFarm2 жыл бұрын
Thanks and you are welcome!
@Bigfoot_With_Internet_Access5 жыл бұрын
"Yours is the drill that will pierce the heavens"
@ProjectFarm5 жыл бұрын
Thank you
@TheMadisonD5 жыл бұрын
My hornnn can pierce the sky
@TheAnigai5 жыл бұрын
Yoko is best girl.
@MRSketch095 жыл бұрын
Is that a 'Gurren Lagann' anime, reference?
@TheAnigai5 жыл бұрын
@@MRSketch09 Why yes it is
@shadowwolfXD975 жыл бұрын
Project farm has deffinately reached the top of my views from notifications, always interesting, informative and a quality test
@ProjectFarm5 жыл бұрын
Thank you!
@Nullpersona5 жыл бұрын
Who needs Consumer Reports, when we have Project Farm?
@jean-pierredejon74585 жыл бұрын
This is more real. Seeing is believing.
@4gauge105 жыл бұрын
@@jean-pierredejon7458 C.U.does the same,exact,tests.
@diamond62562 жыл бұрын
I just wanted to thank you for doing all these tests, especially for people like me. Unskilled, but willing to learn to do projects.
@bgb275 жыл бұрын
Hey there, I've got an idea for a video. Could you test different undercoating materials like POR 15, Fluid Film, etc? I'd be very interested in that. Thanks again for another great video!
@ProjectFarm5 жыл бұрын
Great suggestion! I'm on it. It'll take some time before the video is complete
@bgb275 жыл бұрын
Project Farm Awesome, and understandable. I’d expect nothing less from a thorough test. Looking forward to it!
@connordunckel69055 жыл бұрын
Craftsman did a lot better than I was expecting, would love to see something like this with spade bits.
@Dr.Westside5 жыл бұрын
Throw in some wood auger bits while he is at it .
5 жыл бұрын
my craftsman bits lasted me a long time, their stuff might be chinese now, they still want their stuff to be high quality
@practicalguy9735 жыл бұрын
@ Nope, the old Craftsman quality is gone now. It's all cost cutting nowdays and cheapness will be there. Those Craftsman, Black and Decker, Porter Cable and some others from Stanley Black and Decker all share commonalities you can see. This was starting long ago, I bought a Craftsman router about 5 years ago and its a generic one that is rebranded for Canadian Tire, Mastercraft and maybe others.
@ProjectFarm5 жыл бұрын
Agree. Thank you
@b.a.lineman75825 жыл бұрын
My older Craftsman set has been very reliable... just sits now that I have money and a Lawson set... Craftsman spades are pretty awesome. 4:44 check out the similarities in the Bauer and Milwaukee cases🤔
@Privat3Kag35 жыл бұрын
My dad made drill bits for over 37 years, he used to tell me how "They were the best in the world, and the last worker owned drill bit company in America" All the time. I'm a Gunsmith & CNC Machinist by trade... To tell you that I've spent my fair share of money on drills is an understatement. They go by multiple names: "Norseman" & "Viking Drill and Tool" are the most common however. Their carrying case is hands down the best you'll ever use. After many years of breaking, dulling, destroying the heat treat on, shattering, etc... Drills, I've come to a conclusion.... He wasn't just BS'ing me, they really are THE BEST IN THE WORLD when it comes to mono material drills. I can't tell you enough how much better they are man, It really hurt not to even see them mentioned on here. Try a set, you Will never look at any of these chincy brands ever again.
@Hellsing21615 жыл бұрын
ProSTEEL RAIN I do enjoy comparing tool brands. So I have a question for you. Have you tried Drill Hog before? They claim to be American made and even come in a very similar case as the brands you provided. Ive been tempted to buy them but I'm still seeing whats out there.
@Privat3Kag35 жыл бұрын
@@Hellsing2161 I have no experience with those, I know they are not manufactured by Viking D&T.
@bhough4104 жыл бұрын
@@Hellsing2161 Scrolled the comments looking for Drillhog & Norseman input/suggestions if this test is revisited. Would've been interesting to see how both brands stacked up to the box store brands. I got a Drillhog Moly M7 set off ebay maybe 3 years back give/take a couple months. They've been excellent bits, they seem to build much less heat in my experience than the couple of box store brands previously used. I've broke probably 3 or 4 bits since I purchased them. With the lifetime warranty you can email their highly professional customer service & have a free replacement in your mailbox in less than 5 days with no questions asked. *In the interest of full disclosure I drill various wood species several times per week on average & metal only a couple times a month. An acquaintance of mine who drills metals much more often than I do used them today on a couple types of hardwood & steel, he said he'll be buying a set in the near future. If I ever decide to replace them it will likely only be with a larger Drillhog kit.
@Hellsing21614 жыл бұрын
@@bhough410 Thank you very much for your thorough reply. I really appreciate it. I still hadn't decided on a set yet and I'm still using the junk I have laying around. But I think you have convinced me to buy a Drillhog M7 set now. Thanks again!
@billkinzler3773Ай бұрын
Thank you for the quick response on the drillbits. Really appreciate it.
@ProjectFarmАй бұрын
You are welcome!
@DogzDayzOutz5 жыл бұрын
You should test all the screwdriver BITS that go into a power drill/driver tge cheap ones are always bending and rounding off for me bit I haven't tryed the good ones by dewalt ect thanks
@ProjectFarm5 жыл бұрын
Thank you for the video idea!
@bartzalewski5 жыл бұрын
was going to make the same suggestion ... I've have had various bit failures over the years and would love to save some time and money on my next purchase
@medlytek4 жыл бұрын
Ive tried several. I Think drill bits and driver bits dewalt last along time. Rest either stripped out or twist way to easy costing more in the long run. But i do more wood working than metal or steel. what little i use in metal/steel ive never had a issue.