Which one is the BEST Engine Mount? - SR20 AFTERMARKET Engine Mount Comparison

[@dashiznit89]

I say "CUSCO" too cuz I remember when Emperor's new groove came out.

[@tonobicicleta6054]

I run j replacement one in my s14 and they feel like oem. No vibration at all. Only issue i had was that after taking it out a few time due to my engine blowing up one of the studs in the driver side started spinning inside the mount

[@factionmotorsports]

Thank you for the feedback!!! This is what we like to see in the comments.

[@S13Keng]

Any videos on different types of short/solid shifter for S chassis?

[@jonokuspira]

Personally I have gone from the cusco engine mounts to gktech polyurethane to nismo engine mounts, and the cusco mounts are by far the stiffest mount I have ever felt, its like getting a massage the amount of vibration its adds. The gktech poly mounts are like night and day from the cusco mounts and are not too harsh at all being polyurethane, personally they aren't too bad to daily drive with. I would definitely say the nismo mounts are the best out of all them as Ineeded the height for my oil pan and they feel like stock, great video guys!

[@factionmotorsports]

Awesome info! Thank you

[@DomBeal57]

gktech polys split within 2000km, myself and a whole load of people that have had this happen all went cusco. gktech is garbage

[@Grainsauce]

A huge thing for people is vibration, You should do a video testing the differences in vibration!

[@factionmotorsports]

We spoke about NVH here a bit, Best is Nismo, worst would be Cusco.

[@RoldanSPN]

I went from blown oem style mounts to cusco and immediately noticed the difference. I've had cusco mounts on for about 6 or 7 years at this point and they'll probably last another 6/7years. The cuscos with all the vibrations have felt the same over all these years. They may have a bit of surface rust but nothing crazy. I saved up money to buy Damon's (camryonbronze) nismo mounts off his old black hatch to make street driving a little less obnoxious.

[@factionmotorsports]

Thank you for the info!

[@dreednlb]

JGS motor mounts, FTW! IFKYK

[@carlosruelas8781]

Are the JGS motor mounts still available? I can't find any website selling them.

[@dreednlb]

@@carlosruelas8781 Unfortunately they are no longer made, but every once in a while a set comes up for sale. I was fortunate enough to grab a set. I went through several different motor mounts before I settle on these. They are great and highly configurable since you buy the actual dampening piece separate (jeep CJ motor mount, available anywhere) and you can make both sides rubber, both sides poly, or one of each.

[@skinnyslide]

@@carlosruelas8781 they are not made anymore

[@blakeslide6919]

yet another discontinued and unobtainable part with little information available besides a handful of forum dudes from a decade or two ago saying "it's the best - this post was made using tapatalk" being hailed as the best part, never change zilvia-ites....

[@malekzain13]

I run some rock auto mounts and they seem good, similar to oem

[@Grainsauce]

Are Megan Racing engine mounts basicly the same as the OEM mounts?

[@factionmotorsports]

No, they vibrate a decent amount.

[@S13Keng]

@@factionmotorsportsmy megan racing feel really close to my oem and i barely get any nvh conpared to the isr i had prior

[@archive180sx]

I have the stupid ISR mounts on my car… I love street driving but every red light, I get my head rattled and it sucks. Probably will come by to grab some Dmax mounts in the near future.

[@bmodrak]

I definitely don’t recommend the ISR mounts for a street car. Shit vibrates my eyes at every stop light

[@factionmotorsports]

LOL

[@zacks240sx]

I have the isr mounts It rattles my brain apart

[@zacks240sx]

I would say my only favorite part is how adjustable they are. I prefer the engine as high I can get it as my car is fairly low and I don’t wanna bash my pan in.

[@skinnyslide]

the cheat code for schassis motormount upgrade is z32 300zx motor mounts $40 a pair from autozone and drop right in way stiffer than stock with little to no vibration

[@ethansmith8241]

will they bolt in without modification ? I was going to just buy the J replace kit

[@skinnyslide]

@@ethansmith8241 yes z32 300zx motor and trans mounts bolt right in and are a huge improvement over stock and the hole set can be bought for less than $100

[@skinnyslide]

The best mounts for ka/sr are not made anny more jgs performance they use an off the shelf energy suspension mount bolted to a billet adapter.....if i ever take mine out again im gonna talk to a machine shop about getting the adapters made and start selling them

[@dreednlb]

Do you mean JGS?

[@skinnyslide]

@@dreednlb yes

[@blakeslide6919]

make sure to sell them for 4 times what they used to cost! the true OG zilvia way

[@skinnyslide]

@@blakeslide6919 i mean they were not cheap by any means back then and cost of everything has gone up.....but what i sell the. For will really depend on what it cost me to get the adapters made and how much of a demand there is...