Later revisions of this LED module used screws to secure the green boards. Opening the module was the hard part. Thank you.
@ScottTheFixItGuyChannel9 ай бұрын
You’re welcome 😊
@saturo1234 ай бұрын
Thanks for this, I have the same cover and this was the only video I could find that showed how to properly remove the cover.
@ScottTheFixItGuyChannel4 ай бұрын
Excellent, Thank you😊
@benjiarehart28784 ай бұрын
I bought a replacement from Amazon, and like someone else commented. Be prepared to replace it a few months later. Fortunately it only takes a few minutes to do it, and its under 20 dollars. Great video. You're helping a lot of people. I'm finding now I ahould have just bought the Factory Whirlpool part for 90 dollars.
@ScottTheFixItGuyChannel4 ай бұрын
The
@ScottTheFixItGuyChannel4 ай бұрын
Thanks for sharing 👍
@spetiya17 ай бұрын
I cleaned the LEDs as someone else suggested in the comments with a q-tip and some alcohol and it worked - no money spent.
@ScottTheFixItGuyChannel7 ай бұрын
Nice job Scott😊
@rubenlaredo7 ай бұрын
@spetiya1 YOU ROCK! I too cleaned the LEDs and they brightened up. Thank you 🙏
@wongk6 ай бұрын
Thank you for this as the only thing I found on the internet to help open the cover! I can't believe how Whirlpool make it so incredibly difficult to get the cover to open.
@ScottTheFixItGuyChannel6 ай бұрын
Glad I could help!💻 Brand New Appliance Repair Blog - Lots of DIY Easy Fixes - Click Here: www.ApplianceFixes4You.com
@TotalMishap2 ай бұрын
What can't you believe? They are discouraging you to do it yourself so you pay up the arse for the part and service tech.
@msanderson8906 күн бұрын
That way , you have to hire a repairman. It's like a Apple product ,they are self proprietary
@mr.baseball3880 Жыл бұрын
Thank you very much for posting this video. I DID it myself. Local appliance service shop wants $100 to install this. Saved me at least $100 plus I ordered the replacement myself for $15. 👍
@ScottTheFixItGuyChannel Жыл бұрын
I love it😊😊😊 Thanks so much 👍
@mr.baseball3880 Жыл бұрын
@@ScottTheFixItGuyChannel This is the absolute worst design for a fridge light. We should all send a letter whirlpool to complain that this should not have been so complicated. I thought I was going to Break the cover of of the part just to get to the main area. There's no design for it to be removed. Crazy thing is then you have to still drop the entire receptacle off to still get to the light. Hour and a half project for me.
@savatagedude7 ай бұрын
Thanks for the video!! Mine had a screw holding the main housing cover on, and then i noticed the LED that seemed to have the problem. The moment I booped it, boom, all the lights came back full force!
@ScottTheFixItGuyChannel6 ай бұрын
Ooooo, that’s the kind of repair I like. You’re like the Fonz on Happy Days😊
@marliegirl33732 жыл бұрын
Oh my gosh! Thank you sooo much- you're a lifesaver! I have spent too much time trying to figure out how to replace the lights in my fridge & FINALLY found a video that shows it in detail and explains! I even talked to whirlpool tech support and their parts dept! They finally told me to call a service technician and basically hung up. Thank you!
@ScottTheFixItGuyChannel2 жыл бұрын
Awesome job👍😊
@rubenlaredo7 ай бұрын
Thank you for the video is very informative and to the point. I too cleaned the LEDs lights using a q tip and alcohol and they are bright again.
@ScottTheFixItGuyChannel7 ай бұрын
That is excellent, Thank you 😊😊😊
@grandmoffpuppeteer6 ай бұрын
@rubenlaredo did you mean clean the LEDs themselves or the connector?
@kkmasters4682Ай бұрын
@@grandmoffpuppeteer LED lights.
@robd10833 ай бұрын
This was the only video i could find that shows how to remove the lens cover that doesn't have a screw. Even with your instructions it was super hard and inconvenient to do. I agree with others here, Whirlpool should be ashamed of themselves for making a light change so difficult, just looking for $$$for service calls or extended warranty
@ScottTheFixItGuyChannel3 ай бұрын
I think you’re right Bob😊
@DanielMartinez-ym8ct Жыл бұрын
This was the only instructions I could find that actually worked! I followed them & was able to easily replace, thank you!
@ScottTheFixItGuyChannel Жыл бұрын
Glad it helped Daniel😊
@cobyfaulkner85132 жыл бұрын
Thanks for reading the part number off! I couldn’t find it without taking everything out! Great work!
@ScottTheFixItGuyChannel2 жыл бұрын
Thanks Coby👍
@SherylWarner-m9kАй бұрын
this was amazing - this 65 yr old widow was able to DIY this and I feel like Wonder Woman. Just needed some guidance! You rock!
@LynnBrown-b3x9 ай бұрын
Wonderful! Thanks so much!! I will look at it again when I actually get the part and try to replace it .
@ScottTheFixItGuyChannel9 ай бұрын
You’re welcome 😊
@amandayoung25159 ай бұрын
I was super frustrated with this whole issue, but your video helped a lot!! Thanks!
@ScottTheFixItGuyChannel9 ай бұрын
Excellent, Thank you 😊
@chopkong Жыл бұрын
Mine has a screw in the back, but I ordered from Parts Dr. the one that like yours. I guess it's the new model. 5 minute install. Thanks for the video instruction. I would have been lost without it.
@SuperDadJohnson5 ай бұрын
Hey Scott you da man! Saved me on this one! Local repair guy wanted $300 to repair this for me and all I needed was this led light assembly! Thanks!
@ScottTheFixItGuyChannel5 ай бұрын
That is Excellent 😊If our Video Helped you Fix Your Machine, Please Click Here to Donate with Venmo: venmo.com/u/Scott-Flint-1
@mikewhite9653 ай бұрын
thanks for this...the old now was a little hard to get out but the replacement went in super easy...save me $250 for a service call
@ScottTheFixItGuyChannel3 ай бұрын
Great job Mike, It’s always good to save over $250.
@chiragshah2366 Жыл бұрын
Great video. Really helpful. For me I had to go in with a butter knife from the front and press the tab up and away. Whirlpool should be ashamed of themselves for designing it this way. There's no reason this could not be mounted with a 4 screws.
@ScottTheFixItGuyChannel Жыл бұрын
So true😊
@frugalfreddy812 ай бұрын
But the original module then. Doesn't make sense to keep.buying the crappy china led board
@chiragshah23662 ай бұрын
@@frugalfreddy81 The board I got from Amazon (probably from China) is working fine. The problem is the difficulty to replace it.
@stephenmitchell7915 Жыл бұрын
I have frig model WRX735SDHZ03 and the module you have looks very similar to the one I just ordered PN WPL W11527432. Lots of Chinese replacement parts out there and China is having issues with QA/QC, so good to know to keep on looking if not Whirlpool sourced. Amazon just takes you to substitutes as the preferred items. Thank you very much! Less likely I will break the thing trying to put it in with the help you provided.
@ScottTheFixItGuyChannel Жыл бұрын
Nice job Stephen👍😊
@pickmyname6 ай бұрын
I have wrx735sdhz03 as well. LMK where you purchased? and whether you purchased the whole unit, or just the light strips/boards/modules?
@davidmorse72369 ай бұрын
Thanks, I wiped the led that was out and it started to flicker instead of being dim... I used a paper towel thinking maybe condensation was the issue... Anyway, after wiping down all less with a paper towel, the light works fine for now.
@ScottTheFixItGuyChannel9 ай бұрын
Wow, Great idea David😊
@ryanmiller49768 ай бұрын
OH THANK YOU! I just wiped the LEDS down after removing the cover and it flickered and started working again too! Saved me the trouble of disassembling and ordering a new part. I noticed just 1 LED was out and i rubbed it with a paper towel and all of them got brighter and looked like new. So I recommend trying that first before ordering a new part if it dims.
@Ninamortin5 ай бұрын
Worked for me also@@ScottTheFixItGuyChannel
@mikehayden7330 Жыл бұрын
First video I found is my fridge! I removed the lens and the light module with no tools. It just pops out. Thanks for the info on one bulb being out and making the whole light dim. I think that's my problem.
@ScottTheFixItGuyChannel Жыл бұрын
Thank’s So Much Mike, this will get your lights working again😊 I hope you’ll click here to support us by joining our Channel: kzbin.info/door/7fBqy8806u1r0NpPv_fQ2wjoin You’ll get Live Appliance help when ever you need it. It’s just $5.00
@iradorsey8263 Жыл бұрын
Well done video. I found pushing the tabs on the other side of the module worked best for our frig.
@ScottTheFixItGuyChannel Жыл бұрын
Thanks for the info.👍😊
@jpachon100 Жыл бұрын
Thanks it help me a lot because my light did not have screw to remove the cover I don’t want to break it with this video I did exactly like you show in the video my light. One of the wire was pinched so that was the problem os I fix it thank you I did subscribe and share thank you thank you
@ScottTheFixItGuyChannel Жыл бұрын
Awesome, I really appreciate that 😊
@TimWillinghamRatz Жыл бұрын
I opted to replace the boards only for less than $25. Thanks for the "how to"!
@ScottTheFixItGuyChannel Жыл бұрын
Nice job Tim😊
@vennesakelly6863 Жыл бұрын
Took me a few frustrated tries to get that friggin light out. But putting it in was super simple. Thanks for the help :)
@ScottTheFixItGuyChannel Жыл бұрын
Awesome, I’m so glad it worked and saved you time and money😊 I hope you’ll click here to support us by joining our Channel: kzbin.info/door/7fBqy8806u1r0NpPv_fQ2wjoin You’ll get Live Appliance help when ever you need it.
@marston91063 ай бұрын
Thanks, this video was helpful! Mine was extremely stubborn.
@ScottTheFixItGuyChannel3 ай бұрын
Glad it helped!😊
@dennisdaniel11465 ай бұрын
That’s the best tutorial for my model of fridge in here. Thank you 🙏
@ScottTheFixItGuyChannel5 ай бұрын
Glad it was helpful Dennis😊If we helped you to fix your machine, Please donate: venmo.com/u/Scott-Flint-1
@straygoose8812 Жыл бұрын
Scot thanks mine was a loose connection as 1 led was dim. as soon as i popped the module it came on, could not duplicate . I was going to try to jumper out the dim led but next time we will see? all ok now . You saved me some $$ so I will send a pay pal. Straygoose
@ScottTheFixItGuyChannel Жыл бұрын
Awesome, and thanks so much for your generosity 👍
@bbass56 Жыл бұрын
Mine was the same; but after a few days it went out again. Still trying to find where to buy
@SteveArnold-h2e Жыл бұрын
Thank you, Scott. This information is invaluable, but there is no spot on the back of my LED module where the screwdriver can gain leverage for pulling towards the back of the refrigerator. My only solution will be to pull the module down from the back while hoping nothing breaks. Whirlpool recommends that we call for service, but I can't image they will do anything different.
@ScottTheFixItGuyChannel Жыл бұрын
You’ll be fine pulling it down. Can you double check that there isn’t a Phillips head screw there at the back of the assembly? Some models have it.
@jlsr75 Жыл бұрын
I’m here for the same thing. The screw is out but prying the light cover off feels like it’s about the shatter. Still working on this.
@reguru10 ай бұрын
Thanks for this. New subscriber now. A regular silverware knife on the front right and left corners popped it off. It takes some force. I didn't want to bust it, but it was breaking my will. The fridge plastic held up fine for me. Good luck! Sacrifice the knife if needed. Replacement led strips on Amaz for 10 bucks worked fine so far. This is not a very consumer friendly design by Whirlpool. Side note....anyone else experience the incredibly loud ice maker pump or motor?
@ScottTheFixItGuyChannel10 ай бұрын
Nicely done 👍😊
@rogerdaniel39087 ай бұрын
THANK YOU!!!...finally got the lens cover off. I got away...once I touched the darkened bulb...came right back on and all other came back BRIGHT..Got AWAY!!!
@ScottTheFixItGuyChannel7 ай бұрын
Thanks Roger😊
@laurawells313210 ай бұрын
Thank you for the video. Really mad at Whirlpool right now 😂.
@huhinteresting3 ай бұрын
Hi, thanks for this awesome, helpful vid. Question - the tab for the light cover, do you pull it towards you or push further down? Thanks
@ScottTheFixItGuyChannel3 ай бұрын
Good to push further down😊
@giannalee9852 Жыл бұрын
Your video is the only one to show DIY for this fridge. But I spent 1 month to find it!! Please add more keywords like: LED replacement, Module W11527432.🧐🧐🧐
@ScottTheFixItGuyChannel Жыл бұрын
Great idea, Thank you👍
@NatureExplorer-9111 ай бұрын
Scott you make it look easy. I unscrewed the screw and popped the lens out. But I'm having a hard time with it. I have the original part. Just need to get the unit out. Where you are putting the screw driver in the slot ...will that one tab release the whole thing?
@ScottTheFixItGuyChannel11 ай бұрын
Just use a flathead screwdriver to pry it out.👍 it takes some force.
@chuckbevan3391 Жыл бұрын
Just used this to replace my led assembly. Great video! Thank you!!
@ScottTheFixItGuyChannel Жыл бұрын
Awesome, Thanks Chuck😊
@rezoblaze3615 Жыл бұрын
Thank you for posting this... Saved my butt.
@ScottTheFixItGuyChannel Жыл бұрын
Thank’s So Much, I’m so glad it worked and saved you time and money😊 I hope you’ll click here to support us by joining our Channel: kzbin.info/door/7fBqy8806u1r0NpPv_fQ2wjoin You’ll get Live Appliance help when ever you need it. It’s just $5.00
@alejitodaniel Жыл бұрын
OMG! you make it all look so easy! Thank you😮
@ScottTheFixItGuyChannel Жыл бұрын
Thanks Alexandria, You can do it.👍
@bbass56 Жыл бұрын
Changed the led board - $9.56 ! The hardest part was getting it down
@ScottTheFixItGuyChannel Жыл бұрын
Nice job😊
@annabucy1672 Жыл бұрын
Where do you get it?
@erichmerca4260Ай бұрын
Thanks so much. U helped me solve my issues.
@ScottTheFixItGuyChannelАй бұрын
Very cool 😊👍
@kathykral262810 ай бұрын
got'er done, thanks for the video, I would have been afraid to touch it.
@ScottTheFixItGuyChannel10 ай бұрын
Glad I could help👍😊
@dskiz Жыл бұрын
Thanks for the help! My wife is happy and can see in the fridge again.
@ScottTheFixItGuyChannel Жыл бұрын
That’s what I like to hear 😊😊
@nwilliams317 Жыл бұрын
The LED Controller assembly alone is $403 (plus 8.5% sales tax) AND the LED panel part is $81 (plus 8.5% sales tax) on my WRX735SDBM03. My issue: One side of the LEDs were completely out. My resolution: I unplugged the fridge, unplugged the assembly, removed the LED panels and inspected them for missing solder. Then I stuck in 2 small paper clips in each of the small holes next to each LED light (2 for each of the 4 LEDs) and removed. Screwed the panels back on, the controller back in, plugged the assembly back in and plugged the fridge back in - WORKED!! Both LED sides are back on and bright again. Open and closed each door individually 5 times and then open/closed both doors simultaneously 5 times: Lights turned on each time, full brightness without fail.
@ScottTheFixItGuyChannel Жыл бұрын
Wow, That’s a good solution, thank you😊
@richardm7274Ай бұрын
Thank you so much 😊
@SergeiRodionov1 Жыл бұрын
It's confusing which way the head of a screwdriver goes. First you show that it goes to the left (inward), but in the final motion it seems to go to the right (outward), which would be more logical given the shape of the clip. Please clarify. It would be helpful to see the hole on the top to which the clip goes. Thanks.
@jasonrutledge25512 жыл бұрын
This was very helpful, thank you!
@ScottTheFixItGuyChannel2 жыл бұрын
You’re very welcome 👍😊
@lalvare Жыл бұрын
Thank u for the video, it was a great.
@ScottTheFixItGuyChannel Жыл бұрын
Glad you enjoyed it!👍😊
@John-yb2xp Жыл бұрын
My man!!! So helpful. Appreciate it. I haven’t taken mine out yet, do you have the individual led bulb #’s instead of replacing entire module?
@ScottTheFixItGuyChannel Жыл бұрын
Please let us know how it works👍
@rickdavid1795 Жыл бұрын
That was a great video Thank you
@ScottTheFixItGuyChannel Жыл бұрын
You’re welcome 👍
@melindaroeleveld84562 ай бұрын
Our lights started flickering a little and then the flickering got really bad to the point you couldn't look at it. Then it all was out but one dim light. Does it sound like this video is also the solution for what my husband needs to do? Replace the two green strips only? I ordered some but they look like knock offs. only $19. And does this apply to the Whirlpool French door with drawer? Model WRX735SDBM04
@ScottTheFixItGuyChannel2 ай бұрын
Those green strips will work. Might be better to order the whole thing 👍
@steelbooksteve1743 Жыл бұрын
TY! I got mine replaced with your help!
@josephlandi442 жыл бұрын
I have Whirlpool side by side, about 5 years old. This is second time the lights have caused me a problem. I removed to cover in freezer compartment, unplugged and replugged, it did not correct the problem. My model # is WRS325FDAB06. The part # for upper light in freezer is WPPBA001025E-GLBN. WILL REPLACING THIS PART CORRECT MY PROBLEM? Thank You
@markwanner6213 Жыл бұрын
Thank you!
@warwickdennis4114 Жыл бұрын
Very helpful thank you 😅
@ScottTheFixItGuyChannel Жыл бұрын
You’re very welcome 😊
@67komi2 ай бұрын
Great video
@msanderson8906 күн бұрын
The clips are tonrhebleft and right or just the screw hole in the middle?
@ScottTheFixItGuyChannel6 күн бұрын
You also need to get the clips to release. It takes a lot of force.
@hughbo52 Жыл бұрын
Getting the tabs to turn loose it giving me fits. I hope I get that to work. Thanks.
@ScottTheFixItGuyChannel Жыл бұрын
Yep, double the force, it will come out👍
@hughbo52 Жыл бұрын
I wound up sticking a screwdriver in the top of the fixture and it finally just surprisingly fell out. I don't know what was holding the damn thing in place. @@ScottTheFixItGuyChannel
@atgoogle75884 ай бұрын
Thanks, Only video I could find. Whirlpool wants you to call its service dept. Why made it so complicated to replace just for the light? Only 3 years and it broke. Junk material and design. Never replaced a fridge light so difficult like this and usually lasted over 10 years.
@ScottTheFixItGuyChannel4 ай бұрын
You speak the truth😊👍
@richardp5161 Жыл бұрын
I just pried with the screwdriver instead of trying to undo the two holders in the larger base - it clicked loudly and then complied...
@ScottTheFixItGuyChannel Жыл бұрын
Nice job Richard😊
@astrosntexans5 ай бұрын
I had to use a flathead screwdriver to pry open the sides of the light shield. Once I did that I just touched the bad LED with a paper towel and it came back on
@FENmap Жыл бұрын
If you buy just the circuit board and not the whole assembly, you can pop out those plastic rivets with a knife and replace the new board by using hot glue or sugru. Both will likely cause issues with warranty but if your doing this, you probably don't care
@ScottTheFixItGuyChannel Жыл бұрын
Great info. Thank you👍
@JimmyBamis10 ай бұрын
what is your model fridge? I have WRX735SDHZ03 and your part number is different. My LED is. W11043011.
@vidasharafi9333 Жыл бұрын
Thank you so much ,you helped a Lot
@ScottTheFixItGuyChannel Жыл бұрын
Glad it helped!😊👍
@ScottTheFixItGuyChannel Жыл бұрын
You're welcome Vida😊😊😊
@kumadan22 Жыл бұрын
Thank You. Where did you order your part from?
@ScottTheFixItGuyChannel Жыл бұрын
Which part do you need?
@kumadan22 Жыл бұрын
@@ScottTheFixItGuyChannel the whole led module W11387579. Can't seem to find it anywhere.
@phlywitegy8 ай бұрын
For the life of me I cannot get that back tab off in order to pull off the clear housing. I’ve tried every tool I could think of to try and unclip it. How I wish I had the version with the screw on the back
@ScottTheFixItGuyChannel8 ай бұрын
Yep, Just apply more force it will come off👍
@marthakatehall73652 жыл бұрын
Do you know where this part can be purchased? I can't seem to find it online.
@ScottTheFixItGuyChannel2 жыл бұрын
Here you are Martha: This video shows how to easily replace the faulty 8 light LED module. When one bulb goes out, All the bulbs get dim. Click here to order a new light assembly: partsdr.com/part/w11527432-module?model=WRF555SDFZ15
@yangchangjiang Жыл бұрын
I bought a PCB from amazon and replaced it. Six months later, it died again. Is there any reliable part?
@ScottTheFixItGuyChannel Жыл бұрын
Can you check for the more expensive one from Whirlpool store on Amazon?
@yangchangjiang Жыл бұрын
@@ScottTheFixItGuyChannel Thanks! Are the parts from them genuine? I am tired of the fake stuff from Amazon.
@DomesticDad209 ай бұрын
Now I need help with the drawer light. It went out about a year ago and can’t find anything on how to change it
@ScottTheFixItGuyChannel9 ай бұрын
Great Question👍 Click Here to Get Live Expert Help From Me For Just $5.00: kzbin.info/door/7fBqy8806u1r0NpPv_fQ2wjoin It’s Easy to join. Just text me at (510) 367-5424 and let me know that you’ve become a member and We’ll Get It Fixed 😊
@PeabodyChevoors9 ай бұрын
👍
@antpunisher70192 жыл бұрын
Sir seem I can't get the old part off my fridge with the flat head screwdriver and it's the same model number of the part you shown. Any advice?
@ScottTheFixItGuyChannel2 жыл бұрын
Can you send that same question to my email at: scottthefixitguy@yahoo.com
@antpunisher70192 жыл бұрын
Well I watched it again carefully and then I got it, thank you.
@beckhamzhang4805 Жыл бұрын
I have model WRX735SDHZ03. The LED light suddenly became very weak. I tried to remove the cover, but it did not move at all. I did not see any screw in the back that I can take off. Does anyone know how to fix it? Thanks in advance.
@julioolivares6701 Жыл бұрын
I have the wrx8352dhz02, try putting your phone on selfie mode and try looking for it, that's how I found mine. If anything I'm having trouble trying to take the clips off to be honesy
@beckhamzhang4805 Жыл бұрын
@@julioolivares6701 I stick my head inside and can’t find it.
@ScottTheFixItGuyChannel Жыл бұрын
Can you email me at: scottthefixitguy@yahoo.com
@drlaldallas Жыл бұрын
I have the same model. There is a screw. Use phone camera to check !
@beckhamzhang4805 Жыл бұрын
@@drlaldallas no screw. Can you take a picture?
@joe199127 ай бұрын
Good news: the boards are available on Amazon for $15. The bad news is I have to change ours literally every 3 months. I keep an extra on hand.
@ScottTheFixItGuyChannel7 ай бұрын
Maybe the humidity is too high in the fridge.
@nanp2483 ай бұрын
I ordered one for $15, but it’s not the right part. Do you have the link for the part you order? Thank you!
@joe199123 ай бұрын
@nanp248 Mine is the " W11043011 Refrigerator Freezer LED Module Light " . I thought most use the same light, they are a little funky to snap in though.
@Dragineez774 Жыл бұрын
The whole "just depress the tabs" BS is infuriating. Since it's made out of plastic, you're living in fear that you're using way too much force. There's NO tool guide to make sure you're putting the screwdriver in the right place. The bottom of the tab where you're supposed to be exerting force has no flange to hold the screwdriver tip in place. Over all, a really crappy design. I finally resorted to putting the screwdriver over the module and forcing it down. It popped out with a horrendous noise, but it did come out. No damage. The rest went smoothly.
@ScottTheFixItGuyChannel Жыл бұрын
Yep, It can be hard to get off👍
@Kevin0043 Жыл бұрын
I can't get the cover off!
@ScottTheFixItGuyChannel Жыл бұрын
Hi Kevin, did you remove the screw at rear of the light’s plastic frame?
@Kevin0043 Жыл бұрын
@@ScottTheFixItGuyChannel I actually figured it out. My model is screw less and uses tabs (dumb design). I used elbow grease and was able to remove it
@ScottTheFixItGuyChannel Жыл бұрын
Nice job Kevin, it is hard to pry off👍
@mac11380Ай бұрын
Whirlpool wan'ts $135 for the light module.
@ScottTheFixItGuyChannelАй бұрын
I would get the Amazon one in the description 👍
@mac11380Ай бұрын
@@ScottTheFixItGuyChannel I actually ordered the internals of Amazon for 13 bucks, thanks for the video and response.
@usmanghani734325 күн бұрын
@@mac11380was it easy to install?
@lanadiane28339 ай бұрын
THIS IS THE WORST LIGHT FIXTURE IVE EVER SEEN.. ALSO THE ICE BOX IS the worst ice box to get out.. Not well thought out. Word love to help them design