Tel. 0116 321 4120 Web. www.wholesalel... Just a short video demonstration of the self adhesive qualities of LED Strip Lights. The colour of the product in the video is Cool White.
Пікірлер: 97
@eniolak.8034 жыл бұрын
My led strips dont have a sticky back when i peel the layer off
@mimi-mv6ol4 жыл бұрын
Eniola K. same
@r3n8044 жыл бұрын
it happened to me its becasue when u peell the thing u peel the sticky part off
@rileymcvicker11204 жыл бұрын
You peeled off the 3m tape
@byaws4 жыл бұрын
hey, i had the same problem and solved it, turns out theres a double layer. try poking a hole through the 3m tape and peel only the cover
@officialclevoo40244 жыл бұрын
Did y’all ever find a way to get it to stick cause mines came without it being sticky
@Doctrtony9 жыл бұрын
what I've found is the cleanest way to mount on most surfaces is to take a super glue the one that comes with a brush and just lightly brush along the edges, it seems to come off clean later and never falls. Spray adhesive works on applications like under vehicles, works great and it covers a large area without damaging the car, otherwise super glue is clean and effective in most applications.
@roblox_horse93413 жыл бұрын
But when i peel of the back its not sticky
@onfirephotography6 жыл бұрын
If you are buying any led lights make sure they have the red 3M vhb tape on the back they will never come off
@GrantClouser8 жыл бұрын
mine don't stick to anything
@WholesaleLEDLights8 жыл бұрын
Hi there, unfortunately we cannot guarantee that the LED strip lights will stick to every surface. If you're having difficulty, we'd recommend something like No More Nails to ensure your strip lights stick down. Give us a call on 0116 321 4120 if you need any more assistance. :)
@aaryonakinchen3 жыл бұрын
There are two layers of tape lol
@myacouse2773 жыл бұрын
@@aaryonakinchen why you gotta say lol it makes you sound like a condescending jerk
@aaryonakinchen3 жыл бұрын
@@myacouse277 because I was actually trying to sound nice idiot
@myacouse2773 жыл бұрын
@@aaryonakinchen doesn't make you sound nice moron
@WholesaleLEDLights11 жыл бұрын
Depending on the bond quality I would assume more likely, yes than no.
@LisasLittleWorld4 жыл бұрын
Mine don’t stick because my wall isn’t smooth 😫 what should I do?
@nikomatija62244 жыл бұрын
What did u do I have the same problem
@kimspur9 жыл бұрын
I also have problems mounting LED strips inside a horsetrailer on glasfiber. As you can see in the video, at about 2:11, your strip is not glued all the way, but has gabs between the glue tape and the surface. The glue tape isn't very good at all.... Think it would be better, if I could get the strips without the glue-tape, so I could use the glue that I want, like "No more nails, waterproof"
@trmblingblustar5 жыл бұрын
Yeah. I've installed all kinds of lengths to all manner of surfaces, and the 3M adhesive is worthless.
@rawwKae2 жыл бұрын
I got led lights but it didn’t come with the tape on the back so how do I put them up
@WholesaleLEDLights11 жыл бұрын
We would suggest using a spray adhesive with a high bonding factor. This will allow for a much easier installation than any other method.
@WholesaleLEDLights11 жыл бұрын
Epoxy resin is a soft yet water resistant substance that could be used to bond the light to the headlight. Normally you would find the light is fitted inside the case with the lamp. You would need to make sure the substance is clear to avoid any distinct marks that could be seen.
@crybaby85093 жыл бұрын
The ones I got be sticking to my hand and falls as soon as I stick it to the wall
@MrjayC11 жыл бұрын
i tryed to stick myn to the wallpaper and it keeps falling off iv tryed other tape and still falls off, any tips ?
@ilickcatsforaliving7224 жыл бұрын
dang 6 years and not one reply
@booni65514 жыл бұрын
There is a thin piece you have to peel off. A lot of people accidentally peel off the sticky part, as well as I did the first time.
@jemimastanley67583 жыл бұрын
@@ilickcatsforaliving722 7 years now🤣
@pipobex3 жыл бұрын
Buy a new one
@bobatea53413 жыл бұрын
@@booni6551 thank you!!
@balaurpopescu8 жыл бұрын
Everybody knows HOW separates a paper and stick a LED on a shit. LOL!! This is a tutorial HOW TO SEPARATE A PAPER
@billandpech9 жыл бұрын
I'm trying to apply this to fabric, but the glue on the adhesive on the strip is preventing the glue from adhering to it. Tried rubbing alcohol and fingernail polish remover to get rid of it, but it's driving me to the bottled alcohol.
@tusharbalan9 жыл бұрын
can i bend led strip placing parallel on surface not exactly 90 degrees but like curve
@carmenchavez94004 жыл бұрын
Thank you so much I works now
@spazzy13814 жыл бұрын
What’s a way to clean the sticky side if it got dirty
@bhavesh92p11 жыл бұрын
What would you suggest to stick a led waterproof strip to a car headlight a permanent fixture is fine I am finding the standard tape is not sufficient enough do you reckon epoxy resin would do the job?
@WholesaleLEDLights11 жыл бұрын
I would suggest using a spray adhesive or brackets.
@mal44214 жыл бұрын
Wholesale LED Lights spray adhesive for doesn’t work I’ve tried it
@livbell43813 жыл бұрын
i’m aware i’m 8 years late LMAO but mine took the paint & plaster off the wall in my old room, we’ve repainted my new one, plan to put the lights up soon. do you have any suggestions for things to stick the LEDs to the wall that WONT rip the paint off?? ty :)
@WholesaleLEDLights3 жыл бұрын
Hi Liv! The best suggestion would be use Aluminium Profiles. These can be fixed to your wall using a set of brackets that nail into your wall and will be much neater than having your paint ripped off! :)
@kaiyarizero91413 жыл бұрын
is that wireless? need batteries?
@MrjayC11 жыл бұрын
thank you one more thing would the spray rip off my wallpaper when takeinng them down
@taylorlovestacos63584 жыл бұрын
6 years late but yes
@Stephanie-rf8ru4 жыл бұрын
Mine won't stick 😢
@jasminasaleh64834 жыл бұрын
What did he spray? And why?
@zeldagirl12334 жыл бұрын
Do thay stay on the wall forever
@WholesaleLEDLights4 жыл бұрын
They should remain stuck to the surface you have them on for a long time, though this will also depend on the nature of the surface they're stuck to.
@woodboart3 жыл бұрын
No they soon unstick
@sprisier79534 жыл бұрын
If only it was that easy to peel mine like that
@topshoota34174 жыл бұрын
Ok yall yall know how yall led lights dont stick it supposed to come in a silver plastic bag and it got the sticky things inside to stick the led lights and if it still dont stick it come with nails inside of the plastic bag just incase it dont stick thank me later 🤣🤣‼‼❤
@zoomo16872 жыл бұрын
Thank You!!!!!
@foxgames59283 жыл бұрын
Mine is not sticky
@ufoman44687 жыл бұрын
I can assure you the Led lights i have will not stick to the underside of my glass tv stand after a thorough clean with soap and water drying then cleaning again with methylated spirits. Would it be ok to just use sellotape as this seems to work
@rodadams84225 жыл бұрын
Hi ive just bought some of these light's and yes selotape is what I used thay have been up for two weeks now still going strong 👍
@kabuterrimondw59195 жыл бұрын
Is this Mike Jeavons??
@Keiserto258 жыл бұрын
This has got to be the worst video ever , please assist me, I am trying to install this in any type of weather ex. snow , sleet , wind and this does NOT stick if you look at the TV you installed it on see the the bubble...... that's where it is already coming off from.....
@WholesaleLEDLights8 жыл бұрын
Hi Tom, sorry to hear you're having problems with sticking your LED tape. Unfortunately, we cannot guarantee that the adhesive will stick to every surface. We would recommend using something like No More Nails, or to use one of our aluminium profiles: www.wholesaleledlights.co.uk/led-strip-lights/led-profiles-extrusions.html , let us know how you get on!
@monkey65385 жыл бұрын
I recommend taking off the adhesive that comes on the adhesive and adding some double side tape that you can get from a store. I doubt that you would even see this two years later but what the heck.
@MrLaughatthis5 жыл бұрын
confirmed bullshit, mine lasted less than two full days before starting to sag and fall
@harrylytle9557 жыл бұрын
If its upside down it's coming down but I'm gonna try spray adhesive
@WholesaleLEDLights7 жыл бұрын
We've found that No More Nails works really well if you're having trouble with the adhesive.
@comment14194 жыл бұрын
I have mine but 1 it has 1 sided tape fuuuuk
@mengxiangfaculty3 ай бұрын
1
@KianB5 жыл бұрын
Atleast use a clean surface
@2usmiler7 жыл бұрын
No nails doesn't stick to the ether.
@rashunsrunnings3 жыл бұрын
I'm gonna use tape fuck this
@sivaramakrishna90746 жыл бұрын
v
@mrg15512 жыл бұрын
There not even stuck properly! If your gonna gonto the trouble of making a video on sticking leds at least make them stick till your video has ended 😂👎