$100 an Hour using Two Hand Tools

[@DimBeam1]

Dude. I now cant decide what I want to build my bro's for Christmas. Youre posting too many awesome projects.

[@WhosTheVoss]

🤣🤣 sorry! I have a few more builds geared towards gift ideas coming still, only two more i thinkkk ;) happy building!

[@robm3063]

Maybe drill holes before band sawing. Just a thought.

[@WhosTheVoss]

Not too shabby of an idea good sir ;)

[@robm3063]

@@WhosTheVoss Going to attempt to make this wine rack but with 5/4 cedar deck board. Fingers crossed.

[@richardbrodbeckbeginninggu7330]

I found it easier to drill before.

[@earlkale9616]

I would change the dowel location. Use twice as many dowels, and holes. Same horizontal plane, just on the thicker outside edge.

[@WhosTheVoss]

I just dont like them being visible when the wine bottles are nestled in their homes, they could be placed out in the meat

[@andrea.rivers]

I don't drink, but this does inspire me to build something for my water bottles. 🤔This looks like a good project to hone jigsaw skills. I love the tip about using the foam sheet.

[@WhosTheVoss]

Thanks Andrea :) if you accidently print them landscape it would make an adorable little wayer bottle holder :)

[@larrystone5749]

Enjoyed the video and project thx for sharing Keep building

[@WhosTheVoss]

Thanks *Larry* (i learned how to bold things in text today) you use the star astrix before and after ;)

[@larrystone5749]

Interesting hum

[@calumdickinson9570]

That was really enjoyable. Thank you for sharing.

[@WhosTheVoss]

Thanks buddy :)

[@allenstark6713]

The value and entertainment you provide is not yet matched by the number of subscribers you have. I know you'll get there though. Keep up the great work and thank you for the awesome content thus far. Happy Thanksgiving!

[@WhosTheVoss]

Thanks buddy for the kidn words :) we'll get there!! :D

[@johnthompson3462]

Excellent videos and also entertaining

[@WhosTheVoss]

Thanks John!! :)

[@charlesgerlach7059]

this look great, well l know a christmas gift l needed this one. Also you can make some, contact realtors and sell them on the idea of givin these as a house warming gift

[@WhosTheVoss]

Thats a Grade A idea! :)

[@DarksouIjah]

Thanks for these! Also, nice Triumph!

[@WhosTheVoss]

Thanks :) picked it up at the end of season, shes a fun little bike!

[@RichyN25]

I think the weakness of the thin bit is due to the grain orientation, with a larger piece like that it shouldn't really be an issue unless there is already a split in the wood or someone intentionally tries to break it there

[@WhosTheVoss]

Totally agree. I might adjust the plans so the bottles are a wee bit further apart so its stronger

[@Unitquat]

What about trying to make these with the grain orientation rotated 90 deg? That way the horizontal sections have long grain to support shear and bending force from weight and the sides with short grain are mostly under compression force.

[@letishastamp743]

i enjoy your content. i also respect the free plans

[@WhosTheVoss]

Thanks buddy :) happy building!

[@robt9466]

Always a great video, great plans and great delivery!

[@WhosTheVoss]

Thanks Rob! :)

[@garytingler3222]

That is a great project!!!!

[@WhosTheVoss]

Thanks Gary! :)

[@kellymcneil4622]

They are so different, very nice

[@WhosTheVoss]

Thanks Kelly!! :)

[@orbitalair2103]

bookmarked. nice idea. also like the trivet one too.

[@WhosTheVoss]

Wooohoo! Get out in the shop buddy! :)

[@RonInAVan]

I just downloaded the plains, I’m going to make this for my son and his wife. They are wine 🍷 lovers. I don’t think I will use the dowels, I’m thinking of cutting matching curves in place of the dowels and glueing all them together. I’m also thinking I might add some Laser art, and maybe wording. Thank you so much for the video and plans. Have a wonderful thanksgiving 🦃

[@WhosTheVoss]

Ohh yeahh! Fancy them up! I like the curved idea to attach them together

[@Artzandcatz]

Thank you! Great project!!!

[@WhosTheVoss]

Thanks buddy :) Get one knocked out in the shop!

[@markduggan3451]

Great gift idea.

[@WhosTheVoss]

Totally! I have a few more gift idea builds coming out woodworkers can knock out before Christmas :)

[@kisarader]

im loving your videos you are awsome young man

[@WhosTheVoss]

Thats funny, I was just thinking about how I love your comments! :D thanks buddy

[@Andrew-ih2gz]

When you ran from the jigsaw... I laughed louder than I should have. Lol

[@WhosTheVoss]

🤣🤣 it scared me!!

[@Maverick-j1v]

If you can teach me something AND make me laugh, you've earned a subscriber.

[@WhosTheVoss]

Woohoo! Welcome to the community :) glad you're enjoying the videos!

[@curbshooter]

I love that you show that woodworking doesn't need to be so serious. Go out and make some dust!

[@WhosTheVoss]

Heck yeah! Its supposed to be fun :) my wife gets pretty furious when she is baking (her hobby) Ive shot nails in my finger and not been mad about it lolol

[@justkjthings]

Instead of printing extra copies, you can use dowel points in the holes to find where they would match up on the adjacent piece.

[@WhosTheVoss]

I dig it! :)

[@seanpaula8924]

Cool. Gave me some ideas, thanks ✌️

[@WhosTheVoss]

Thanks buddy :) Happy Building!!

[@gf8958-p7p]

Thank you for the great idea and the entertaining video. 😊

[@WhosTheVoss]

Thanks buddy :) Happy building

[@randypedersen2141]

Love it! Thank you!

[@WhosTheVoss]

Thanks buddy :)

[@cabman86]

Small as they are, I'd use my scroll saw. Neat project!

[@WhosTheVoss]

I like it!! :) doin a little scroll saw action

[@cabman86]

@@WhosTheVoss Almost every day. It gets a workout! I bought it about 30 years ago from Harbor Freight and it's still going strong!

[@guymussori6457]

GREAT VIDEO and a GREAT PROJECT/ IDEA !

[@WhosTheVoss]

Thanks buddy :) happy building!

[@Joe-p6k]

Why not put your holes for your dowels in a thicker area to prevent cracking? Only need to be 1/2" long to align with.

[@technoman9000]

That's what she said

[@WhosTheVoss]

I just dont like them being visible when the wine bottles are nestled in their homes, they could be placed out in the meat

[@Lady_of_Ishpeming]

​@@WhosTheVossYou could drill the holes before you cut out the shape. I think that would work. 🤔

[@thomasschoppe6610]

Als erstes, eine tolle Idee. Das Ergebnis ist richtig gut. Allerdings verwirren mich die Maßangaben immer wieder. Ich bevorzuge (weil ich kein anderes nutze) das metrische System. Aber ich kann ja rechnen 😉 Also nochmal, ein tolles Projekt. Meine Entscheidung deinen Kanal zu abonnieren war goldrichtig.

[@WhosTheVoss]

super! Bei diesem hier kannst du die Pläne ausdrucken und dann ist praktisch alles für dich erledigt :) Viel Spaß beim Bauen!

[@RayandSandysWoodworking]

Really cool project, looks awesome!

[@WhosTheVoss]

Thanks buddy!! ;)

[@phillebeau9464]

12:08 is your money shot! Love it! Thank you!!!

[@WhosTheVoss]

Ohh?? Maybe blur it for Members only?? 🤣🤣 Love it

[@mrmyblessednest1722]

@phillebeau9464 what makes it a money shot?

[@phillebeau9464]

@@mrmyblessednest1722 It's just a producer / Video editor phrase used to mention that it is a cool and unique camera shot.

[@higgiepop158]

Another great video!!! Thank you!! 🪚🗜️

[@WhosTheVoss]

Whoa whoa whoa 🗜️🗜️🗜️🗜️🗜️since when had their been a clamp emoji!!

[@gaspumprepairservice7009]

Nice. ✌️ I can almost envision a double stack, single cut rack.

[@WhosTheVoss]

Hear me out, three 2x6's, all 8 foot length to hold 15+ bottles ;)

[@gaspumprepairservice7009]

@@WhosTheVoss THAT, my friend, is a lot of sparkling juice! 😹

[@christophermoorhead5983]

Either glue the plan down on the wood or... if you want to use the template again, use a pencil, darken the backside on the lines, tape down to the wood and then trace the template with a pencil. Basically transferring the template onto the wood. Have my students do this all the time.

[@WhosTheVoss]

Ive heard of the reverse pencil on the paper trick, imma have to give it a try :)

[@michaelkline4800]

Or create a physical template out of plexiglass or thin material and trace it onto the wood with pencil or sharpie

[@bassdojo]

Can't wait for you to hit 100K subscribers. Long time fan! Don't become a sell out and review stupid tools or have sponsors.

[@WhosTheVoss]

Me neither buddy :) i tried a sponsored video, they really aren't for me :P i plan on sticking with build tutorials for a while

[@TheCarpenterGirl1984]

Xin chào 👋👋 một ý tưởng và một dự án thật là tuyệt vời 🎉❤ tôi đã đăng ký kênh của bạn là đúng 👍

[@WhosTheVoss]

Cảm ơn! Bạn đang tự mình thực hiện một số dự án làm đồ gỗ thú vị!! :)

[@JohnColgan.]

I wouldn't worry about dowels, plenty of offcuts, create rounded blocks and glue on chunkier areas of blocks. Or Wouldn't hurt to reinforce the thin segments with 2x 3mm strips inlaid cross grain

[@WhosTheVoss]

I like the clean openness between the curved sections, ill probably make the plans a wee bit taller so the area between the bottles isnt so small :)

[@cabman86]

I would make one for the fridge out of acrylic for holding all my hot sauces. It would have to be a lot smaller.

[@WhosTheVoss]

Ohhhh tell the printer you want 4 pages on each page, it would be so adorable!

[@cabman86]

@@WhosTheVoss The printer is my wife. She will print something out and I have to go make it.

[@scottweaver6594]

@@cabman86haha I have that same issue. My wife sends me a picture and says “can you build me this?”. Of course I stump her when I ask “what size do you want?”. To which she replies”just whatever you think”😳

[@cabman86]

@@scottweaver6594 Mine holds her hands apart and I say 6"? No! Bigger than that!

[@jeffruffing2316]

Awesome Video as usual! I’m a big proponent of templates. Seems as if all three are the same design. One template made would make life easier. Not only that, you could flip your template to mark the holes on the other side. Storage of the template would be easy.

[@WhosTheVoss]

Imma make me a template forrr sureee ;) but for those following along at home I used the paper method

[@AZbone]

Nice build. I may build a couple

[@WhosTheVoss]

*woohoo!* Its a fun build!

[@RAcreativewoodworks]

Nice buildd thanks🎉🎉🎉

[@WhosTheVoss]

Thanks buddy! :)

[@PartisanOgrae]

When kindergarten crafts meet power tools. Good times.

[@malcolmbacon7892]

Another great video and project , just a thought could you could drill them before cutting

[@WhosTheVoss]

That is a Grade A idea ;)

[@MrPeardog]

I'm trying to convert to laser SVG to burn a pattern onto wood to avoid messing with paper and glue. Just gotta figure out how to keep dimensions correct. Thanks "VOSS"!

[@WhosTheVoss]

As long as the circles in the middle are 3-5/8" youre good :) happy building!

[@michaelkline4800]

what size bandsaw blade did you use for this?

[@WhosTheVoss]

Its a thin 3/16" blade that came with the saw 🪚

[@daviddeas6486]

How about using Baltic Birch Ply and using longer dowels to space them out for the width?

[@WhosTheVoss]

Give it a try :) sounds pretty cool

[@gnic76]

Yeah, grain orientation would have me worried. Once stuff goes out to the shop, you can always say "I don't know what happened to it". 😂

[@WhosTheVoss]

"looks like you threw it on the ground", thats what Ill tell the customer ;) they are much stronger and more sturdy with the 1/4" dowels

[@nore8141]

That’s really nice ❤❤

[@WhosTheVoss]

Thanks buddy :)

[@luceroernest]

Where do I get plans?

[@WhosTheVoss]

Plans are in the description: click on "more" under the video, then click "more" to expand the description". Any plans I provide will be listed there :) or visit WhosTheVoss.com

[@sassysusansshop2011]

Was thinking with the templates you could drill the holes before you cut out the pattern

[@WhosTheVoss]

That's a banger idea! Im going to make a template with the bottles spaced a little further apart to prevent the splitting

[@RonInAVan]

I really like this project, may have to give it a try. Question, what size is your bandsaw blade you used to cut them out? Very entertaining video 👍🏻

[@WhosTheVoss]

Its the stock blade that came on her, its like 1/16" kerf and 3/16 band. Happy building!

[@bruceregittko7068]

Do you need dowels? If just for alignment maybe use 1/8” dowels and some glue (CA?) on the faces.

[@WhosTheVoss]

I used thinner dowels on the one I clear coated at the end, worked a lot better. I might adjust the plans so there is a little more space inbetween the bottles as well :)

[@bobgrayson9720]

Are the plans on your website

[@EricRedbear]

The link is in the description under "FREE DOWNLOADABLE PLANS!"

[@WhosTheVoss]

Yes sir, theres a link in the description, its also the newest plan on the site so it will be at the top :) no credit card required

[@bobgrayson9720]

@@WhosTheVoss thank you, I was able to download the plans

[@RonInAVan]

Hey I just made this but made a change to it, how can I send a picture of it to you? Thanks

[@WhosTheVoss]

You can share it on any woodeorking Facebook grounp (im on all of them) Woodworking for Beginners is my main hangout, or shoot me an email buddy [e-mail]

[@chrisgraham7475]

glue all together then drill screw and plug??

[@WhosTheVoss]

I like the spacing the dowels provide :) screws would give it more strength

[@chrisgraham7475]

use dowel positioning pins for location

[@WhosTheVoss]

Sure could :)

[@colaman51]

I thank you for the free plans. When I get them from you, they are tiny. what am I doing wrong

[@WhosTheVoss]

Did you right click and "save" the photo on the website, if so, click on the image first so it appears as full size. Otherwise the PDF downloads should open as an 8-1/2x11

[@jk_wrangler13]

Those are cool

[@WhosTheVoss]

Thanks buddy :)

[@onlyychevys]

Just mirror one of the prints? Or drill the center one all the way through.

[@EricRedbear]

I also thought about the drill through on the center, but realized you'd either have a sliding section or have to secure it somehow, which might weaken the board and/or dowel.

[@WhosTheVoss]

Drilling a hole all the way through would weaken the joint even more. I did mirror the plans so the back of the center board is included :)

[@SniperUSMC]

I built a small table for my jig saw, mounted jig saw underneath with blade sticking up and use that as a poormans band saw, plus I only have a 1.5 car garage, yeah they call it a 2 car garage, but that was a lie.

[@WhosTheVoss]

Cars were a bit smaller back in the day, our first home said a two car garage but there was noooo way two cars AND closing the garage door was not an option 🤣

[@twaycce]

Dude, the posting from Etsy is made of dark walnut, cost of the ruff cut 8/4 walnut alone is $79.75.

[@WhosTheVoss]

Ohhh yeah, those are beauties. Love me some Black Walnut!! I sell the pine ones for $50. $4 cost sold for $50 each is 92% profit :) happy building buddy

[@twaycce]

@@WhosTheVoss Dude, your actually showing a BLURED picture of the Black Walnut that is advertised on Etsy for $179. No one who a quality product made of black walnut is going to buy a stained pine framing wood version of it. If they do they probably live in your trailer park.

[@TheChrisDaly]

Why not drill the dowels into the 'meatier' part of the form using 4 dowels on each side instead of two ? Surely it would make for a more robust product ... 😉

[@WhosTheVoss]

I just dont like the look of finished piece with the dowels in the sides, i like them hidden between the bottles. I might adjust the plan so the bottles are a little further apart

[@Marjax]

I feel a template coming on...😂

[@WhosTheVoss]

🤣🤣 wouldnt be a bad idea, I do have some 1/4" plexiglass sitting around

[@SoutheastSam3]

Sneaky little Chappell Roan in the middle.

[@WhosTheVoss]

Heeheee, usually I cut anything requiring background music down but I left a little bit in this video for my Red Wine Supernova piano :)

[@psychedelic-guitar-art]

[@WhosTheVoss]

🦖🦃🗜️🪚😎

[@VitalPolymath]

Whoa!! No singing?!

[@WhosTheVoss]

Just background music for this one :)

[@gaspumprepairservice7009]

Creative camera work almost makes up for it. 👍

[@TenBuckCanuck]

Those look suspiciously like power tools, not hand tools.

[@WhosTheVoss]

I see where one might think they are power tools, because hand tools are operated solely by human muscle power, while power tools use an external power source. Howeverrrr, I use a power inverter to charge my batteries while riding my bicycle. Which makes them a hand tool hybrid. Nowww the bandsaw, that little gem might cross the line into power tool ;)

[@lightningmacqueen4097]

Hey, boo, you could rotate your templates 180 degrees and the "hook" of one cut would fit into the opposing "hook" of the previous cut. That way you'd be reducing waste. It might not give you enough room to get an entire extra cut out of it but at least it would give you some extra 2"x6" scrap for other projects.🪵

[@WhosTheVoss]

That would give me some extra scrapies! Thanks booboo!! Imma make a plexiglass template for to use in the future :) it'll also help getting them closer together

[@Artzandcatz]

Thank you! Great project!!!

[@WhosTheVoss]

Thanks buddy :) Happy building!!

[@rs2343-o4e]

I would change the dowel location. Use twice as many dowels, and holes. Same horizontal plane, just on the thicker outside edge.

[@WhosTheVoss]

Yeahhhhh i just dont like being able to see the dowels, i like them hidden between the bottles :/ imma adjust the plans so the bottles are a wee bit firther apart so its stronger