Some people eat fish eggs and drink rotten grape juice to feel fancy. I like to soak in a hot bath and play video games on my Switch.
@pietfree16010 ай бұрын
In my defense the package didnt say that I couldn't take it in the shower.
@ClassicTrialsChannel10 ай бұрын
It always amazes me how people treat their stuff. I look after my stuff and will still look like new after years.
@darkx68699 ай бұрын
You act like you’ve never had a fuckinf accident
@TheStwat7 ай бұрын
Kids.
@xavierayayaell5464 ай бұрын
Wait til you have children, little dick heads I tell you
@Zu3sUK10 күн бұрын
Yea, No mate, I'll correct you on that, it's parents and their s h i t upbringing and neglect on teaching them early to look after their stuff, have all my tech from when I was a kid still in perfect nick such as my Master System 2 I've had since I was 5.
@ScottMadeAThing10 ай бұрын
"That wasn't in the listing" I laughed so hard. That solder/hot air job was impeccable! Stupid water.
@StezStixFix10 ай бұрын
🤣 thanks Scott. Those little connector things are a nightmare, so I was glad to not melt this one!
@Vibropollo10 ай бұрын
I agree, perfect!
@ygstuff489810 ай бұрын
The scratch removing with the polywatch alone was worth watching the video--wow!
@lastsipahi10 ай бұрын
Steve you've becoming a Switch Doctor. You almost pinpoint faulty places instantly.
@patrickradcliffe383710 ай бұрын
That Poly watch was freaking AMAZING! I've never seen a screen that beat up come back that much.
@PileOfEmptyTapes10 ай бұрын
Displex (which I reckon is the exact same fine acrylic polishing paste sold by the very same company in the same tube with a different design) has helped me with more than one radio dial cover, as well as a clear plastic soap holder that someone must have attacked with coarse scouring means in the past. I would definitely give it a shot if I had to save a badly scratched CD. On a side note, I bet they're buying the stuff by the bucketload and making a pretty penny selling it in 5g tubes... but it does work well.
@SaitoGray10 ай бұрын
"If it doesn't work, i'm going to give up !" Is such a mood.
@GonzoPhysics10 ай бұрын
That chip flying off with the upbeat music in the background nearly made me pass out from laughing.... I don't think anything scripted could be any funnier. Thanks for all the learning and laughs! Absolutely love the way you roll! Outstanding! 🤙😂
@chanyphilly826610 ай бұрын
I actually clapped when you got it working, I was so pleased! Nice one!
@edgarblumenfeld947910 ай бұрын
I understand the anxiety and desperation of trying to fix something for hours on end, and even if logic says it shuld work, it still won't. I felt your relief when it loaded that game at the end brother...felt nice!!!
@TravisFPV2 ай бұрын
Spoilers!
@Amber-jb8su2 ай бұрын
@TravisFPV That’s why you avoid the comments section until the end!! ;)
@TsiolkovskySportingLocks10 ай бұрын
I am beginning to think that these Switch Lite things are cursed... But your soldering skills are off the charts mate!
@StezStixFix10 ай бұрын
😁 thanks TSL, really appreciate it!
@sobertillnoon10 ай бұрын
Yeah, like that chip flying off the board.
@bart.k10 ай бұрын
I'm afraid its not the device that's cursed but users. They're having a really hard time before ending up under Steve's scope!
@sparky15087510 ай бұрын
I think alot of the issues are people that sell on ebay and lie. I have had so many xbox ones that are unfixable but just listed as sometthing else. Had a controller recently listed as working but x button not working and when it arrived it was full of corrosionand doesnt work at all. @bart.k
@simonsepic10 ай бұрын
If its anything like my house they get given to the youngest in the house and they do unpredictable things. I have a pink lite that ny 3 year old decoded to dunk in a bucket of water while I was doing aquarium stuff, power cut out instantly thought it was a gunner then 2 weeks late ri randomly test it and it comes alive.
@fritmoule10 ай бұрын
Great, but really, again, vinegar is the way to go to dissolve and THEN use alcohol to clean the vinegar. Rust, lime scale, battery leak => vinegar :)
@t1d10010 ай бұрын
Two tips = 1) To polish the screen, try a foam ball buffer bit on a rotary tool/dremel, to apply the cleaning paste... Similar to a car electric buffer. 2) If your glasses have transition lenses, have your eye doctor give you a prescription for soldering glasses = A single focal length that is strong, but long enough to get a soldering iron in under your nose. For me (far sighted,) that is about +4, for a distance of about 12"/300mm. I have been spreading the word on YT and everybody loves them. No more chasing the narrow band that is in focus.
@nikkiofthevalley9 ай бұрын
Huh. Once I get some glasses (I'm nearsighted, but not nearsighted enough to matter except when soldering small components) I'll probably ask about that.
@morgan09 ай бұрын
i’m a bit too nearsighted to comfortably solder with my glasses off. would be pretty hot that close, and i don’t want to splatter flux or solder into my eyes lol. 12 inches would probably be fine, im closer to like 4 or 5 inches of focus distance
@t1d1009 ай бұрын
@@morgan0I'm so sorry; I don't understand. I was not suggesting to not wear glasses. I was suggesting that for people that wear transition lenses, they get a single prescription, so they do not have to chase the proper, narrow field of view. And, that the focal distance be long enough to accommodate a soldering iron. I hope that helps. Maybe you were just joking with the prior commenter?
@morgan09 ай бұрын
@@t1d100 oh sorry for any confusion
@matthewspray91977 ай бұрын
For some reason, the Switch is your kryptonite. I enjoy the journey, the dedication and the perseverance. Great content. Keep it up. Thanks.
@harsszegi10 ай бұрын
🎉 It’s just unbelievable how much you have progressed over the months in terms of fault detection, soldering skills, etc. Kudos!
@nbaua345410 ай бұрын
With great power comes greater responsibility... But with bad consoles comes the worst replacement challenges.. This is the most satisfying video in a while
@MarcSiqueira10 ай бұрын
The hot air going at warp 10 speeds always gets me hahaha. Crying here from laughing when that chip went flying, all i thought was picard's face palm meme. 😂🤣🤣. Great fix tho! Nice job Steve!
@davidlo19a10 ай бұрын
So glad that it worked in the end. After removing the game slot, I think I saw a trace or two under the flex ribbon cable that needed attention. Maybe not broken all the way, but the solder mask is scratched away.
@gazscho197310 ай бұрын
Special…… very special. I felt you anguish, then joy. Keep on truckin big man
@XeonProductions10 ай бұрын
Amazing to see how much your skills have improved, and I've learned a lot just from watching you.
@kudratortikov120410 ай бұрын
My sincere cgrats of your next success! You know I'm very happy when you are! Greetings from Uzbekistan! A nice job!!
@spatbee10 ай бұрын
I can't believe yo fixed the screen before testing it, you're a different breed.
@bart.k10 ай бұрын
Amazing work! That connector defect was super hard to spot!
@bullettube986310 ай бұрын
I'm very jealous of your ability to se what you are doing! I gave up modeling and repairing electronics when my eyesight started to fade and plain reading glasses failed to improve things.
@petergilbert710610 ай бұрын
I wasn't telling you not to put it back together yet, but I do think you are in the pocket of "Big Thermal Grease". Great vid as always.
@honorw412510 ай бұрын
The suspense was killing me 😱 so glad you solved the problem 😃 for our benefit and your sanity too😁 nice 👍
@drawnSHORT9 ай бұрын
It's so hard to find a channel that uses the correct amount of thermal paste. Thanks. Subscribed.
@landyboy710 ай бұрын
Liking the new camera work… great perspective so we can really get an idea of how small it all is!
@sparky15087510 ай бұрын
Love seeing the excitement when it works, I've been doing original xbox ones for a while now just for practice and I'm the same when it works. Love the content mate, keep it up.
@andrewgrant651610 ай бұрын
A very entertaining parade of calamities. That wasn't water damage, it was milk damage.
@rebel446610 ай бұрын
Why they're water damaged? Kids... spilling drinks, dropping the handheld into something and everything in between. But the Switch is actually very repair-friendly for what it is. Job well done!
@grayghostrepairs10 ай бұрын
The Switch and Switch Lite videos are always so intense. Awesome repair! Look forward to the next one.
@theaerospacecrab23710 ай бұрын
Well done Steve, well chuffed for you that you managed to get it working 🎉
@TheJoJoJesus9 ай бұрын
I SO feel your pain! I know exactly how you feel especially with cable connectors. There have been many a time I have given up and ended up throwing a laptop on the floor. "One more for the spare parts box..." Fixing electronics is not good for your mental & physical health but the puzzle of getting it working is just too absorbing... I could never do it professionally. Thanks for the laugh and knowing it is not just me!!! : )
@headbanger417010 ай бұрын
Brilliant… I actually cheered out loud when it worked !! Emotional rollercoaster… luvin this channel
@wusb810 ай бұрын
amazing fix, i was holding my breath at the end there. Fantastic result.
@Zobbster10 ай бұрын
What a rollercoaster! Well done for getting it sorted, you're a wizard Steve!
@teropirttimaki10 ай бұрын
I do have to love your character, damn you do it good. Such an honest man.
@briancoulomb10 ай бұрын
Nice job sir. Your skills, troubleshooting and soldering just continues to improve. Another one saved.
@sorakat4210 ай бұрын
Awesome as always! You had me in suspense there for a bit. Glad to see you come out on top over that stupid board connector.
@StezStixFix10 ай бұрын
I had myself in suspense too! 🤣 all worked out nicely in the end...
@Jesselovespinball10 ай бұрын
Get in there !!!!!! Nice job ! Always entertaining if you fix it or not ! Thanks for another great video
@WillianMolinari10 ай бұрын
These references to other channels are just amazing! Really enjoyed. Another great video!
@LxftRxght10 ай бұрын
Dear Switch Doctor, Two questions, if I may? 1) Where can I learn your craft? 2) Do you have a separate channel for your music? (because you are actually mad talented!)
@TimeShrike10 ай бұрын
2) totally, loved it too! The smoother beats and voice works great. I do love the OG style beats a lot too. Also, since Switch Doctor told me to: told you not to put it back togetheeeehhh.
@TonyVeart10 ай бұрын
Steve you must be buying your stuff from the same place I get mine. You fix one thing and another fault comes along straightaway. Well done mate you fixed it, mine normally gets thrown in the corner while I sulk for a few months before having another go at it. Always enjoy your videos mate 👍
@alejandronan60710 ай бұрын
Hey Steve you killed on this one!! That connector was crazy, didn't have to put sunglasses on 😂😂😂 thanks for the cool video!
@meatball97110 ай бұрын
love the new camera angles plus great vid as always
@IceofDream.10 ай бұрын
Oh I'm so glad this one got to see the light 😆 amazing job on the connector I wouldn't have the heart to try replacing these yet but you deserved a happy ending with this one😄
@stephenhepworth311310 ай бұрын
Great choice of song at the end 🤣( laughed out loud when that chip blew away too🤣) top work 🤘
@pimpedoutstereos974710 ай бұрын
Amazing work Steve! All done. But uve given me all the inspiration to never wanna do my own repair work on any switches. I’ll stick to my earlier console jobs instead
@Jorppuli10 ай бұрын
I really like those new camera angles
@kennethphillips600610 ай бұрын
Congratulations! Great video. I enjoyed the many angles when working on the M92 chip.
@creativesamurai837210 ай бұрын
I really enjoy your videos, there so relaxing and informative at the same time. You're sense of humour and mannerisms reminds me for an old friend i used to know ( also had the weirdest sense of humour lol). you as a person seem to be so likable. if it was possible, id be happy to buy you a pint and chat Sh*t for a few hours in a local pub. keep up the great videos and have an amazing week. All the best fella. Dave.
@pctechjustin10 ай бұрын
I laughed so hard when you said let's annoy everyone who doesn't like it when I put it all back together, that's me!! but it's still funny hell. Love your channel.
@jbowen79110 ай бұрын
Thanks for a great vid and thanks for leaving the mistakes in--they are all extremely relatable!
@boo_10 ай бұрын
I like how you polished the screen before even testing if it works. lol
@timmoore686810 ай бұрын
Love your videos buddy, It’s your sense of humour that makes them so good 🙂👍
@fredpsyche950210 ай бұрын
Steve the same happened to me a few days ago. I'm so relieved not to be the only one 😂
@ringbling42010 ай бұрын
Congrats on finally getting a lite fixed!
@expendable728110 ай бұрын
Nice work Steve, it's great to watch when you solve multiple problems. Well done 👏
@TheJoJoJesus9 ай бұрын
I think you would love a place we have in Tokyo... shop's name is "Hard Off". They sell "Junk" for pennies and often work. You name it, they have it!
@wisher21uk10 ай бұрын
Those holes could be probe marks? as there were some on the right hand joystick socket test points, 6:19 the 5 points all had indents which is normally a sign. Thanks Steve😊
@starchildluke10 ай бұрын
What a recovery!
@HangryGiant10 ай бұрын
I laughed so hard at the emltional damage part in the rap. Youve gotten pretty good ad editing.
@kevb181610 ай бұрын
Good stuff! Might be worth investing in an ultrasonic tank for cleaning up liquid damage and flux residue. Fill it with IPA (initially expensive but will last a while before it needs changing) and they work really well. A good brand of display polish is Displex but not sure if it’s still available.
@wryyyy10 ай бұрын
Good job on the cartridge slot connector. I would've tried to align it close enough and anchored it with some Kapton tape. Also, I'm sure you've used polywatch before, but it's good to keep in mind that the paste contains some acetone, for softening up the plastic, so cleaning it thoroughly after polishing is important, as well as keeping in mind to not use it on soft plastics, as acetone can be bit too harsh on those.
@krahwinkel950310 ай бұрын
Who changed the connector ? Super Steve ! Our repair hero.
@simonlunt35310 ай бұрын
Steve l said no test it before you put it back together but I did feel for you mate and A Big congratulations for getting it working you clever boy 👍👍
@ernestogarcia239310 ай бұрын
Great problem solving and nice job finding that pin
@samuraidriver4x410 ай бұрын
If you used the correct amount of thermal paste it would have worked first time😂😂 Great repair Steve👍
@apollolux10 ай бұрын
I thought it was going to be the traces leading to the connector rather than the connector itself. Fine work! :)
@alextoppen10 ай бұрын
The final look of joy!!!!!
@JoCrt10 ай бұрын
Well done. Must be a great feeling to fix it.
@RickRacket10 ай бұрын
That one was doubly satisfying to see you fix because of the game card reader twist.
@mrbussey10 ай бұрын
Top notching repairs, Steve!! Great work!!!
@patrickcasey397310 ай бұрын
Liked your selection of background music for this one!
@MrKillaDoG10 ай бұрын
Good work for not giving up Steve. lol
@singlesteve201110 ай бұрын
LOL maybe you should add another counter to how many parts you blow off screen next to your plastic counter
@wasdaletimelapse76589 ай бұрын
so happy you fixed it. i've bitten half my nails off with the suspense.😂😂
@thegrassyknoll77928 ай бұрын
For screen polishing try jewelers rouge to get that crispy clear look
@djksfhakhaks10 ай бұрын
Its a good day when I see new videos of yours friend.
@Js20608 ай бұрын
Stumbled upon you. Made me laugh several times. Enjoy your content… hello from Pennsylvania USA!
@gbamck10 ай бұрын
What that Muttley laughing at 10:15 ??? 😂
@ericleves0110 ай бұрын
Nice job as always ! I wanted to know what kind of flux you are using?🤔♥️
@MyklBlue6910 ай бұрын
If you kept going with that poly watch and scrubbed more between applications, you'll get everything out of that screen. They are the perfect kind of scratches for poly watch. It'll even get that bigger one to the left out.
@SaccoBelmonte10 ай бұрын
Lovely to see the Polywatch in action. I've got some and thankfully I haven't needed it.
@zKaltern10 ай бұрын
This is a good day to not reset the melted plastic count! Good fix, irritating - like all Nintendo fixes seem to be. Have you had the opportunity to fix an OLED Switch yet? I can't recall a video?
@StezStixFix10 ай бұрын
Yeah, they always irritate! Haven't done an OLED yet, but I don't think I've found one for a decent price yet. I'll keep looking! 👍
@watchingdanny10 ай бұрын
Awesome work Steve. Very nicely done.
@garymucher408210 ай бұрын
I am still impressed how you don't show any emotions when you fix things...lol
@keironcornell939610 ай бұрын
Well done Stez!! Perseverance paid off!
@DustinLBooher10 ай бұрын
Really nice new camera angle on this video. Thanks
@IntoTheMindlessAbyss10 ай бұрын
Absolutely impressive work.
@majorlan565610 ай бұрын
You are the best Stevz ! But I told you not to put it back together yet...
@brandonkick10 ай бұрын
Great stuff, happy to see you get it all sorted! Just so you know, even if the game cart slot hadn't been sorted out the switch is still very usable with a picofly modchip installation. The pico fly chip is quite cheap, and then you can just load all your games on an SD card!
@MrMillerGaming10 ай бұрын
I love those songs at the end. One day were gonna see an advert for "100 songs by Stez" like the one the sea captain released in the Simpsons Mr Plow Episode.
@EBSantos12310 ай бұрын
Hey Steve! People play these things while they do the number two. That's why they all have water damage. 😂😂😂
@robhood-c2o10 ай бұрын
Nice fix, that connector is a hard one to do👏
@dunderdotten10 ай бұрын
Perfect Saturday! Abit of good Rum on ice and a vid from BestStezFixThinGG
@1kimdotcom10 ай бұрын
Another brilliant Video Steve, Keep up the good work 🙂
@fixins10 ай бұрын
Ole Steve needed this one!
@sargentcolon232310 ай бұрын
I love your vids. Songs and all. I’m getting closer and closer to attempting a USB repair on my “working” PS5 thanks to you.
@fredpsyche950210 ай бұрын
PS5 ? Buy low melt solder (138C) Life will be much easier. Otherwise you'll keep blowing 400c for years.