WHY CHEAP TURBO KITS ARE A SCAM!

[@RicerMiata]

Download the FREE Upside App at upside.app.link/ricer to get an extra 25 cents back for every gallon on your first tank of gas.

[@RollingRoadEFI]

My favorite part about MaxPeedingRods coilovers is how the fools who buy them convince themselves that they're decent.

[@OmarGonzalez-km7tx]

What happend to Bailey

[@chb2live]

I'll sell you my turbo ka24e d21 on megasquirt runs and drives clean title

[@SuperBigNye]

that will seal just fine with any rtv you dont need the high temp red for that. the high temp red is normally used on exhaust ports.

[@dvulpis29]

Thank you for your service

[@kokelynathan21]

Your block off plates will work fine. Also your new drill press adjusts speeds with the pulleys on top open the cover and you’ll see them. Try a bit of cutting fluid or some sort of wd 40 or something when drilling. Will save your drill bits a ton when using them. Low speed helps too.

[@RicosHeadLieutenant]

This… please use fluid whilst using the press

[@josmith213]

Yes, anything will help if you don't have cutting fluid, wd40, motor oil, any kind of spray lubricant,

[@benboyce7493]

Lol spit is even better then nothing

[@240Trevor]

Things can never be bolt on I swear. This gives me 2015 vibes back when we didn't have any info or good parts to build these cars. Cant wait to see this shred!

[@BrocleeWrenches]

Get away from red rtv! go with Ultra black permatex or honda bond been building boosted streetbikes for years and this is how we seal cases and have never had an issue. Keep going! When you're ready for your version of Spoon/Josh LMK!

[@MoreBo0st]

Fr I always swear by the black right stuff kinda expensive but it dries fast and holds great.

[@disfordrift9593]

I did the same thing to my s13 single cam. You have to use big washers or the boost will blow out the RTB. Trust me ive been doing the single gingle for 9 years

[@joshshelton796]

To change speeds on the drill press, you open the cap and move the belt. It has different ratios. Awesome video guys!

[@kylecandy2221]

Hey Chris I believe the intercooler pipe is probably a place to bolt the maf for a blow through setup!

[@TheADHDgamers-x7j]

I think it’s for the turbo intake pipe

[@SammyRavage]

It's definitely for the maf

[@kylecandy2221]

@@TheADHDgamers-x7j yeah I looked at a picture of another older cx kit and it looks like it’s for the intake side of the turbo

[@sandercornel]

From 5:10 seeing a 10 second clip of you driving out of your street gave me the chills, remembering a 30 minute video of you walking that far and it was a milestone after your leg was broken. Crazy how time flies❤️

[@AverageJoeBuilds]

As long as you rtv it good you're fine, even make a gasket from gasket material (oreillys, amazon) either will be fine with that plate

[@Euroboyz]

Your block off plate will work depending on the boost you run.

[@1DEADBEEF1]

I would just tap that EGR hole and place a bolt in there with locktite, a smooth round head with the hex drive would look good

[@richardknapp9491]

You should have grillo bargain shop certain expensive tools being that he’s known for being thrifty he seems like the type of guy who would be good at it

[@TheReaper42069]

Lol unfortunately he would probably need to learn the difference between a drill press and a bandsaw.

[@Jay-vb3kf]

@@TheReaper42069what’s the difference 😂

[@sweettee3647]

Good job on building the block off plate. Yes it should be good with rtv. Good to see Matt working on his cars. Matt has came a long way. Please take Matt and get his hair cut.

[@FORDLYFAOTEAROA]

Like an influencer to the homeless,nice.

[@ubdaestancenation5850]

Leave his hair 😂

[@1993MAZDAMIATA]

“I can have 5 little rudniks running around in that thing” Dude just imagine 5 rudniks. All identical running around😂

[@rsoles27]

Did you put a screw back in that little cross over pipe between the runners?

[@DiZZoLabs]

***Pro-Tip*** When buying a house talk to the neighbors. You can pick a house but you can’t pick your neighbors.

[@jdirty3995]

Grillo is my favorite character in the ricer cinematic universe

[@dizzy_foxx]

Thanks man for the continuous content and also for how quality the videos have become. Really awesome you taking it so seriously compared to years ago, it’s awesome to see things moving and groovin’. No more tumor on your back anymore. It’s so very obvious how much happier and more positive you’ve been. Proud of you Ruddy!

[@Andy4543]

How many days has it been since Chris has said subscribe for more at the end of his videos! I miss that

[@ptmiller98]

I was 199lbs last year, got down to 180 and stayed there for months!! I ended up doing a water fast for a few days dropped to 170lbs and started doing only cardio and having a big dinner with no food all day. I have way more energy throughout the day and actually like intermittent fasting. I weigh 161Lbs today and feel amazing I haven’t been this light since I was 16 lol 🤘🏼🤘🏼🤘🏼🤘🏼🤘🏼

[@quentinc1275]

Hell yeah

[@95turbostang21]

Matt stop complaining rudnik is right, I had to pull my motor, cut the front end of my car off and put a tubular front end on, turbo my car,install a holley ecu, Change the transmission on my car all in my driveway with going to work for 8 hours. If I did not do it, then I would never have been able to own what I have now. Enjoy every minute of it while you can. You're in a garage on a lift building something you really want.

[@TECATIAN2]

weren't you sponsored by maxpeedingrods a couple of times? 😂

[@TheReaper42069]

😂😂😂

[@EduardoSanchez-gh4tb]

S14 engines didn’t have those butterflies. You can use the upper intake with your s13 bottom and dnt have to deal with that

[@20piecemcchicken93]

S14’s didn’t come with a single cam. The kaDE and kaE intakes are different.

[@EduardoSanchez-gh4tb]

@@20piecemcchicken93 I didn’t see he was working on a single cam. I didn’t get that far in the video. Haven’t seen a whole video since b4 he moved from Tommy’s shop

[@Tor2Guh-]

Rudnik witnessing a Rudnikism in the autozone parking lot it RudCeption at its finest.

[@miiiikee_]

4:54 Ruddy you should be aiming for about 1g of protein per pound of body weight during your diet. It's easier than you think.

[@MoonRammer]

matt is a hero to the channel

[@akadk123456789]

The speed control is by changing the belt under the top hat of the drill

[@Tylerfromtjstudios]

Dude. If you were to follow the instructions the intercooler piping would fit up perfectly with no mods.. First hand experience here

[@sleepycb7]

The flange on the intercooler pipe is for the maf sensor to the turbo or inline to the throttle body...either way the flange goes to a maf

[@RNOUNDEAD]

If you have edges and want to make a template you can put masking/painters tape over the surface and tap it with a mallet and it’ll cut the pattern out of the tap and you can just pull it away next time you make a new plate for something

[@americanmechanic909]

11:17 another thing to try in this situation is using a pair of vice grips to hold the Philips bit and use a 3lbs sledgehammer to progressively ramp up the power behind each hit while trying to loosen.

[@aaronkraemer9887]

I'd really recommend just tapping that egr hole and throttle shaft hole for a bolt, and then either loctite or run some thread sealant (or rtv) on the threads. Additionally, that pipe clearly has a MAF flange welded on it, so it's either meant to be an intake pipe or made to use the maf in a blow through configuration.

[@drifterp]

That pipe is from the airbox to the front of the turbo.

[@elfalcon666]

Grillo: I heard bbws like guys with tools buys a single drill press

[@pristineautoclean]

Invest in some LH drill bits. For small fasteners like those on the intake if they do get stripped most of the time the LH drill bits will spin the fastener out as you drill. Worth having in the tool box

[@nbmiata9507]

Any rtv will be fine for air related things. But always expect a failure under high load. I make them for the bp4w motor witch is what you should be swapping in for an extra 50hp :)

[@imasianproductions]

should get some JIS screw drivers for all the Japanese cars, could save from stripping screw in the future.

[@3ooZyX]

What I used for those screws on butterflies was a needle nose pliers.

[@tdlaustralia7791]

Open the top lid on the drill press. It's probably belts which changes the speed. Also spray it with some lube, not the belts, everything else.

[@minnesotamudslinger]

The speed on the drill press is changed by moving the belt on top to different pulleys open the top and you will understand

[@4EverParkedLS]

if you open the lid on the drill press you should see two pulleys, one on each end with a belt, depending what level the belt is on will determine that the speed the bit spins.

[@andrewloebsack1147]

Doing the exact same thing right now with the cab of my truck, lot more work to fix it but gives me practice with my new welder!

[@markusftw5138]

The Pipe with the flange is supposed to bolt to the MAF. They have install-pics on their website.

[@texaspowerman]

Btw what’s with the saw, get a oscillating multi-tool. It’s a hundred bucks if you already have a battery pack and charger. The cut through most anything. Until you clap a box cutter blade in it and go to town on some plastic you won’t believe how handy they are. Grate for cutting anything in tight spaces, exhausts, metal wood. Better and faster than a jigsaw and more versatile than a chop saw.

[@Bellcountyspeed]

Rtv will seal those block off plates fine if the surface is fairly flat. Which it looks like it is. Doesn’t need to be the nasty red eye sore color typically you only use that on the exhaust anyways. Regular rtv black or gray will work just fine I’m a gray rtv man myself

[@shauncollinson4393]

I think 470 thousand people need to thank ruddys mumma for giving him to us. ❤️

[@JDMz]

*Four hundred and sixty nine thousand.

[@shauncollinson4393]

@@JDMz yeah I couldn't be botherd checking the exact number so I rounded up.

[@chancewise6060]

I was sitting here going Matt's right about the welding but you made me question myself ruddy 😂

[@drgibs347]

That intercooler pipe is meant to bolt to a LS style throttlebody. Judging by the shape of the flange.

[@drb996]

Call Trevor, he had one of these and has blown maybe 6 KA'.

[@RollingRoadEFI]

My favorite part about MaxPeedingRods coilovers is how the fools who buy them convince themselves that they're decent.

[@badgermetal]

The intake is cast aluminum. Good thing you didnt try to weld mild steel to it. If you buy or borrow a bead roller for cold side tubing you can cut that flange off and use it with a silicone coupler.

[@skeleton1791]

Grillo musta upgraded the fab shop back home, what a come up lmao

[@ryanhicke4588]

That will be fine it's under vacuum or intake pressure. Love all the content and you should come to Vancouver Island BC in your Canada tour, that would be awesome

[@gateaccess818]

just sand both matting surfaces of block off plate, use some wax and grease remover then rtv the plate into place and bolt. golden

[@JoseReyes-gh5sz]

Hey chris please put the little screw that you took out the manifold back or you will be looking for a vacuum leak for a long time

[@okeydokedamian]

That pipe is the intake for the turbo. The 4 bolt flange is for the MAF sensor.

[@1rcracer]

I started using upside cuz of watching you. It works for me a lot driving a 5.0 f150 😂

[@22766A4R0N]

Will the screw hole for the butterfly valve rod not need plugging too or did you put the screw back in

[@danielgoodall3732]

I died when you did the impression of Grillo 😂😂

[@marshal7376]

Also unless you change the sensors how does getting a new harness get you different clips? I mean if you just want fresh clips that's one thing but you still have the same connections on the sensor so?

[@drgibs347]

Red rtv=no good.. you need at the minimum black rtv(aka the right stuff) or gm sealant(grey) but personally i would of used the liquid jb weld, thatll hold for sure.

[@tylerwood67]

Love the consistency working out over the years man! You should collab with collector car feed those dudes are hella funny!

[@miguelmigkustomz9010]

Hey Ruddy that pipe with the square flange goes to the MAF 👍

[@jlinders13]

The pipe is turbo intake and the questionable flange is for the MAF. Like a cold air intake. The small tube is for a recirculating OEM BOV. Just plug it.

[@kingbryant5673]

I have maxpeedingrods coilovers on my Miata. I needed to buy something cheap to lift the car up. It used to be slammed on race lands. I recently bought isr coilovers to replace them

[@michaelmetcalf9916]

I think Chris has grown up doing all the fabrication some busy work during the last couple videos just doing work good on you have come so far 😊😮

[@snowfreak207]

The shop content is the best

[@MediocreEverything]

No bullshit, I tried to put an offer in on the same house. Incredibly beautiful home. Did you get to fully tour it?

[@Andy4543]

Chris is all tatted up!!! When you get your first face tattoo lol

[@AutoBat1]

My friend had a truck stolen and the thieves spray painted all the chrome black to try to make it stand out less

[@americanmechanic909]

5:10 I'm honestly surprised your not trying the "AG1". Cleetus has them as a sponsor too, athletic greens.

[@collin_maloy]

He tried but couldn't lie about how gross it was 😂😂😂 they force them to drink it on camera

[@americanmechanic909]

​@@collin_maloyoh yeah, I forgot about that. How could I forget that funny of a video.

[@MikadoRC]

Yes the block off plate will work fine, a little thicker metal would be favourable but it should be ok with rtv

[@DaltonZMS]

Looking like you did back in Florida when you first got there looking good homie glad to see it

[@brandonharder5651]

That pipe bolts to the maff

[@us6246]

Chris “walking is not sustainable” rudnik

[@speednwargo]

I think that intercooler pipe is for the maf? Maybe?

[@jasonlovell9639]

For a budget build with more power I'd get a s13 dohc head get it ported to the max get a step up or 2 for cams and slap it on there. Would make close to 200whp about 11.5:1 compression supporting headers and it's would make it scream with the 4.10 gearing

[@Cyborgbear11]

I don’t know if I missed anything, but any updates on the sunny? Last I saw was you dropping it off to Josh and I’m excited to see it again

[@wolfgangperson]

W just got home from work see ruddy uploaded 3 mins ago. Hell yeah EDIT: Yes the RTV will hold as long as its also bolted properly.

[@GhstEvoX]

Do some Honda content 🙏🙏

[@staticboys7190]

Built my hardbody ka with all max peeding rod direct bolt on no issues did it for about 4-500 3 years still going strong

[@RXIsaac]

I just did this to my KA. Tho my butterflies came out no problem. Tho I definitely need an impact screwdriver for my injector caps.

[@Its.VinnyB]

Congrats on the fitness goals dude, keep it up it gets even easier in time. Then you just start to love it and always try to improve each and every day. Keep at it

[@bushpigproductions2259]

It will seal and speeds on that drill run off a belt on top take the lid off it and you can change the speed you should have the speeds under the lid

[@zano742]

Finish what you started and buy the OG haggard house

[@edstababy]

With the scratch offs and xboxs

[@ZEROTOSIDEWAYS]

Open the top, there you can change the speed by changing the belt

[@honeywellsnake]

I've never had issues with block off plates. Haven't had them on a boosted car tho

[@guildensteinfoutch6232]

What are your calories set at Chris. 120g of protein is super easy to get just eat alot of chicken protein bars shakes. Etc I'm at 2700 calories a day around 150g protein sometimes more per day. I went from 315 pounds to 197 pounds in a year. Also hitting the gym 5 days a week

[@240sxKadet]

I seen people put jb weld then the block off plate with rtv

[@gateaccess818]

ultra black RTV for EVERYTHING> permatex ultra black. long as surfaces are prepped and cleaned. everything. only use high temp red for exhausts, that's legit it.

[@jonathanvasquez8494]

Lowkey i mis the old school videos with will & tommy

[@scottiemcknight1632]

I think that throttle body pipe bolts to the mass airflow sensor…???

[@DarylSinghh]

Red rtv will seal jb weld would of sealed 2 and been quicker tbh. Also id just cut the pipe and amazon a coupler the other pipes should hold it in place there inna way it wouldnt blow off imo

[@jonlyons3376]

To change the speed you open the top of the drill press and move the belt

[@tonyrios233]

Around @3:46 mark isn't that the same street that Tommy's gtr got totalled at by the old geezer

[@shaneanning180sx]

Plates look mint. Good job on putting the head back on she sounds good

[@austinblake1484]

Love the content. Day 20 of asking you to paint the floors 🙌🏼

[@bigmacsniper7222]

I forgot about that🤣

[@edwinslopez1178]

22:42 the maf bolts on to it then u use a coupler from maf to throttle body

[@cokfordollie]

lol no speed switch on that drill press you need to move the belt around the belt is on top

[@Aaronnd21]

block off plate should be good i did a block off plate on my sentra a while back and used just metal no rtv or anything

[@cornwallius]

Pro ricer tip, when you need a circle just trace a socket out.