Why I like 🇺🇸American Standard🇺🇸 Toilets

American Standard Cadet 3 Toilets are awesome!
For more help with your bathroom remodel, check out:
bathroomremodeling.teachable.com

[@taytaytheoriginal4850]

You really shouldn’t caulk the base of the toilet, you are going to want to know if a leak is there. Otherwise American standards are great even in commercial settings

[@BathroomRemodelingTeacher]

Left a space in back. And it is code. I like it for sanitary reasons 👍

[@taytaytheoriginal4850]

@@BathroomRemodelingTeacher that’s good, not sure which state you live in but here in Indiana there is no code on caulking toilets, plus the dirt and dust will just collect on it…..everyone’s a critic haha

[@nsbstrong3624]

It's code down here that you have to grout it in that way in a big fat ass sits on it that acts like an actual base and doesn't Rock back and forth if the floor is unleveled due to whatever reason.

[@chechnya]

Lol you don't know what you're talking about. The manufacturer recommends caulking the toilet minus a small space in the back for a leak to present itself

[@BoughtNotBuilt]

Yeah I'd say 99% of the toilets I install get caulked, small gap in the back per manufacturer. 6 years plumbing

[@donhoyt7518]

And I don't caulk the base if there's a leak i want to know sooner than later unless code says to

[@BathroomRemodelingTeacher]

Yep code, but left space in back 👍

[@monkey7547]

Love those toilets!!! Easy install!!

[@hectordiaz1427]

Me too it's a easy install

[@OCC_Plumbing_and_Restorations]

I like the parts they come with, not the toilets themselves.

[@ArabiTiger2015]

But remember you smashed the H2Option? Cause that was my favorite

[@joshpeterson3884]

Why are your bolts so loose? There should be washers and nuts that go on the flange and closet bolts. Also no shims needed?

[@BathroomRemodelingTeacher]

Flat floor, no shims needed. And yea, not all bolts come with locking nuts, but those are nicer to use 👍

[@joshpeterson3884]

@@BathroomRemodelingTeacher I wish all toilets were set on flat floors 😂

[@Goofyahh-no_7]

It's the champion 4

[@Joshhhhh12345]

Nope, cadet 3

[@DonJosesito]

You installed the plastic nuts that secure the toilet to the flange upside down. The beauty caps won't grab well.

[@OCC_Plumbing_and_Restorations]

That's the same way I installed mine and they work great.

[@BathroomRemodelingTeacher]

bathroomremodeling.teachable.com/p/home

[@godofplumbing]

Hack job. The flange must be on top of the finish floor.

[@BathroomRemodelingTeacher]

Still at it 👍

[@ferretbaby1992]

Every clown talking about caulk. Not only does it help seat the toilet it looks cleaner and you leave a opening in back so if it does leak. What you should be talking about is how he screwed down the flange and glued it🤣🤣 when he can buy a flange insert that glues into the drain and is more secure.

[@Worldwidegiantgrowers]

More than one way to skin a cat

[@billybuilds]

I've been buying the American standard reliant and cadets for years. I have never seen these nuts. What is this sorcery?

[@ericbryden4306]

Are they made in America?

[@prabakrankathrievel9679]

Public wc remember

[@CarlosSanchez-bg4wf]

I usually don't caulk around toilet in case it leaks in future either or sometimes I leave back open. It depends, excellent job sir keep it moving bruh

[@Worldwidegiantgrowers]

If your toilet leaks you don’t know how to install a toilet. You should not have to rely on it not being caulked

[@CreampieSamuri]

I can’t believe people still use nasty wax rings with much better options out there

[@DonJosesito]

If you ever own a plumbing company that installs hundreds of toilets per job you will understand why wax rings are still king. Cheap and will always work.

[@Titantitan001]

I never caulk the bottom of toilets. Only traps water if theres a leak. Better it go on the tile so you know it needs to be fixed. Cheers!

[@grubbygringo]

Agreed

[@Worldwidegiantgrowers]

I hear that one more time I’m going to puke. You always caulk a toilet so it doesn’t rock.Also it’s more sanitary

[@joseaceves81]

I like American standards but I hate the hardware. I normally replace all plastic or steel hardware with brass hardware. I've had to replace too many American standard tank bolts are rusted and impossible to take out without a dremel and a whole lot of patience. When it comes to toilets nothing beats 5/16 brass bolts for longevity.

[@dannysternod4791]

That toilet is going to leak at the base for sue

[@markallen8448]

those plastic nuts/cap holders are garbage. I use 5/16" brass closet bolts not the cheap 1/4" plated steel crap that comes with the toilet "kits".

[@73er-xy3ky]

Steve I thought you were using the foam gaskets for the base to the closet flange?

[@BathroomRemodelingTeacher]

I am for the most part. They don’t sell the sani seal ones at depot or Lowe’s so I went with a traditional one one this one 👍 amzn.to/3r49r5e

[@73er-xy3ky]

@@BathroomRemodelingTeacher Thanks for the reply STEVE . I will be installing toilet soon and gonna use one of the sani seal gaskets. Are these affiliate links so u can get some kickback">?

[@BathroomRemodelingTeacher]

@@73er-xy3ky thanks Dan- here’s a link 👍 amzn.to/35AHD07

[@73er-xy3ky]

@@BathroomRemodelingTeacher Hey Steve are these ok to use with toilet closet Flanges that are set on top of finished floor? Or are they to hard to compress? Also have you had any issues with these ? I read some people said the outer coating comes off and the foam underneath absorbs water?

[@mikewest712]

Did you really upload a video with that flange like that? Not cool

[@donhoyt7518]

Don't like the plastic rings sometimes the bolts will pull thru

[@BathroomRemodelingTeacher]

Really? Never had that happen… 👍

[@nsbstrong3624]

I put the tank and everything on before I set it just like if you're going to put a sink in go ahead and set the faucet beforehand

[@Worldwidegiantgrowers]

Doesn’t matter that’s your preference

[@seanlebourveau6598]

That flange job ......yea installed 100s of toilets.that ain't right

[@pack26149]

Too fast 😂😂😂

[@JL-vo2vk]

Why? Do you have to include the stupid squeaky tape fast forward sound??? It's sooooooooooooo annoying!!!! Silent would be better