Why I WON'T Be Buying Anymore Magpul Pmags

Why I WON'T Be Buying Anymore Magpul Pmags
Magpul Pmags have been the gold standard for over a decade. I think that is changing. Make sure you watch till the end and I'll explain why.
Thanks for watching! Let me know what you think and don't forget to smack that "Like" button!
Click here to see a playlist with all four videos in this series:
• Magpul verses Lancer -...
Click here to learn more about my AR-15 build:
• Building My Ultimate A...
Check out my Patreon page to get direct access to me! / countryboyprepper
Use code "Country5" for 5% off your entire OpticsPlanet.com order
OpticsPlanet: bit.ly/2b1PfNn
My Ammo Shop: www.myammoshop.com/?ref=31
Coupon Code: "CountryBoy5Off"
/ countryboyprepper
www.google.com/+CountryBoyPre...
/ countryboyprepper
/ countryboyprepr
Music by Josh Woodward
www.joshwoodward.com/

[@S4M4R1T4N]

Metal feed lips. He won't be buying magpul anymore because he like's metal feed lips. You're welcome.

[@watchthe1369]

see the circled "i" in the top corner? See the torture test video linked there..... He also links a play list covering your comment.

[@FireStorm81318]

You forgot the weight difference.

[@CountryBoyPrepper]

kzbin.info/aero/PLuzM8PiPS-m0XbXj4fJ8IBRlPUhe9_SlS

[@petercrawford8112]

lol no shit bro .......repeteing

[@Neotokyo69]

its for the people like me who dont feel like sitting through the video

[@captainhiltz73]

Won't be buying anymore PMags... Real reason why... He has 250 of them.

[@My_Alchemical_Romance]

Captain Hiltz lol right

[@nramorrisg8415]

Well I'm going to blame it on Puff Puff the Magic Dragon who lived by the sea rolled plenty of fatties sitting there at that oak tree. Puff Puff the Magic Dragon books never fail.

[@barry7413]

Today's lesson: How to stretch a 60-second video to 11 minutes.

[@Mr314snowman]

The P Mags come with a snap on cap for the top, this cap pushes the rounds down and takes the load off the feed lips. This means they can be loaded indefinitely without any issues on the feed lips. I noticed you didn't say anything about that and I thought your subscribers should know that.

[@farmninja6653]

75% of people buy the gen 2s which don't come with them anymore.

[@fallout1116]

Just to add that no generation of AK Pmag comes with the caps.

[@MrHeavyMetalRocker1]

Farm Ninja I don’t know anyone who still buys gen 2s. Gen 3s are the same price and far superior. I get gen 3s for $9.99

[@scottkapalin9121]

@@MrHeavyMetalRocker1 where you Getting them for 10 bucks ? And are they for a ar15 or 10

[@MrHeavyMetalRocker1]

Scott Kapalin gun mag warehouse has them for $9.99 if you don’t want to order online but you have a scheels near you they price match. That’s where I buy my mags from and just price match to the website.

[@cheif10thumbs]

Should NOT have taken that long to not make a point.

[@CountryBoyPrepper]

Should not look a gift horse in the mouth either...

[@pinkysidealmond2854]

So what’s the reason ??

[@AudibleVisibIe]

How else would he make money from the video tho?

[@devinwhite104]

haha i know its like the only people who post vids love hearing them self talk

[@reaganriddle1583]

CountryBoyPrepper is u complaining abt feed lips a gift?

[@havilahgold2942]

Stomp on a GI mag and then stomp on a PMAG and you will change your tune.

[@havilahgold2942]

Tasty TeaBag I'm not talking about on purpose. If you have done any run and gun, mag change drills ....etc. Then you would know that stepping on magazines happens semi often. And when it happens to GI mags they bend.

[@dildoswaggins4881]

Great point

[@Rick-wn5oh]

Or dropping on pavement. Something heavy stacked on top. Things happen.

[@ghostshadow9046]

+Tasty TeaBag Don't have to step on them, have had mags get dented/bent in mag pouches just hitting wall taking cover in training. bent many mags running confidence course and bent a couple barrels on bayonet training

[@ravener96]

i might have been privileged with my heavy steel HK mags, never saw one dented on the flat.

[@checkc131]

I love the "ounces equals pounds and pounds equals pain" quote when it comes from a person who is overweight.

[@rodiculous9464]

I mean they would know best about pain

[@ImBransolo]

Big or little it’s true

[@SlickzyTTV]

I dont really get that statement. Its obviously true, but how much is 3 pounds added or removed going to affect me when I'm 6'4 and 260lbs. I dont think 3 more pounds will make a big difference, I could lose some weight on my body, but make my gun oz lighter.

[@ImBransolo]

@@SlickzyTTV how much do you Squat? Sometimes 3 lbs can make all the difference in the world. Tape a 3 lb dumbbell to your rifle and carry it around.

[@SlickzyTTV]

@@ImBransolo Honestly I'm not sure, I'm working out now more than I have in high school, and in high school I could squat 225. I know I'm over weight a bit(or alot), but I feel anyone that's a tad/or alot overweight, they'd get better results working out / losing weight. I know it's a thing that gets said in the military, but for civilians I feel get in shape (including me) lose some weight, then make your gun lighter, or do it all at the same time lol. Now I lowkey want to try that lbs. When you put it like that it seems like it'd suck lol. If you have a few attachments that weight 3 lbs hopefully you are getting your use from them.

[@county365]

Well given this is an almost 4 year old video, I’m sure you’ve heard it plenty already but I’ll say it anyway. As a military veteran metal feed lips on a mag aren’t all you think they are. Drop a mag at the wrong angle it’ll bend the feed lips & then you have a paperweight. Personally & professionally I would rather have a mag that, if dropped at a bad angle, had feed lips that had some give to them. Then there’s the whole noise discipline thing, pmags a a bit more quiet. Overall I find that pmags are a bit more efficient, but those are my personal tastes & opinion based on experience.

[@johncoleman5974]

I agree . I have about half and half . And some dumb ass at a gun shop told me my pmag would melt in a fire fight . No way hahaha I'd shoot my barrel out way before my lower could ever get that hot

[@arizonagroyper]

It’s okay, you’re correct

[@CL-ty6wp]

Hardened steel on lancer. Dropping a mag wont bend them lolll Steel not aluminum.

[@mghegotagun]

@@CL-ty6wp proabably true, but allegedly, they were the other vendor mag included in the military tests and preformed the worst of the 4 magazines tested. Some reviews and comments state dirt/dust seize the lancer magazine follower easier producing more intermittent failures to feed.

[@jmmartin7766]

@vintage6string1 - 💯 I'm a vet too, and agree completely

[@Big_Man__]

I think the first complaint that I have with the metal mags is that when I'm out shooting, metal mags tend to get blazing hot out in the sun. I really like the polymer in that regard

[@homerunner7772]

You're right about metal mags getting hot. Maybe use gloves or duck tape the metal mags.

[@Big_Man__]

+Home Runner fortunately I don't own any myself. I only have the polymer kind but I have used some of my friend's and got to learn that way.

[@divery4eyes]

gorilla tape is thicker and should insulate a bit, also that rubber stuff that you dip your tools in should work

[@tawmifm]

You should have tacticool gloves anyway, even when using polymer.

[@slappy8941]

+Tamer Kassem (T900Kassem) Hell, I wear tacticool gloves 24/7. It's operator as fuck.

[@acparish]

I'll be happy to take a few of your PMags off your hands to help you make room for more Lancers

[@ssimon64]

Magpul has done more testing on mags than you could ever imagine, they've torture tested all kinds of different blends of polymer to find the best compromise of strength, hardness, flexibility, and durability, they've done countless drop tests, they've tested leaving their mags fully loaded for years and heating up their fully loaded magazines to hot temperatures and observing the effects on the feedlips, they've experimented with using metal feedlips. They know what they are doing, there's a reason that they stuck with the polymer feedlips.

[@CountryBoyPrepper]

kzbin.info/aero/PLuzM8PiPS-m0XbXj4fJ8IBRlPUhe9_SlS

[@chipcook6646]

Steel bends that is why some side by side come with polymers skid plates.

[@williammunny6061]

Military has chosen Gen 3 PMAG windowed and non- windowed for their standard issue after rigorous testing and thousands of rounds, where the PMAGS outperformed all competitors. Sooooo there’s that now........

[@ironikpanda]

What all mags did they test? Curious if Lancers were a part of it and how they held up?

[@gavingross2174]

From what I've heard (though I am in the Air Force, so idk if this is 100% true) the metal feed lips on competitors consistently were bent, and made the mag non-functional. As such it was deemed more logical to use PMAGs as the new magazine for the M4. Again, it's what I have heard through the grapevine, so take this as you will.

[@DesmoProfundis]

@@gavingross2174 I've seen literally dozens of bent feed lips on metal mags. I haven't seen one single feed lip issue with Pmags.

[@plack_benis382]

@@DesmoProfundis yeah polymer shouldnt malform without high heat being put on it. The feed lips just crack if anything from stress, which ill take over a bent up metal feed lip that may or may not work

[@The-Skinn]

👏

[@PrimaryAndSecondary]

When a USGI mag leaves spec due to dropping, use, wear, etc - it bends and you can't tell it is out of spec until it malfunctions. If a pmag leaves spec, it cracks. Like with anything firearms related, occasional inspection is needed. Pmags also are stronger than USGI's as shown when they were first introduced. That strength helps with overall durability.

[@CountryBoyPrepper]

So you are saying you disagree? I know who you are and respect your opinion. Thanks for the input.

[@PrimaryAndSecondary]

I disagree to a point - you bring up some good reasons though. The weight concept definitely and ounces absolutely equal pounds. Knowing the guys over there, I suspect the evolution of the pmag will never stop. For my personal and work use, all I use are pmags due to the durability factor. I understand Lancers are outstanding. I still have a stockpile of gen2 pmags that are 6-7 years old and a bunch of gen3s that get rotated in as gen2's die (which is rare).

[@CountryBoyPrepper]

Thanks. Do you think anybody on the FB page would be interested in this?

[@PrimaryAndSecondary]

I do. It brings up things people should consider. If we aren't constantly assessing our needs and our equipment we are already outdated.

[@CountryBoyPrepper]

Which one should I post it on?

[@apache2013]

O my goodness metal mags is just $7 and pmags is just $11! Here in New Zealand metal mags is $100 and p mags is $150 i think gun stores in here are ripping us off

[@marshallmacdougall8152]

Well you need some freedom

[@squintygreeneyes]

you cant shop online in NZ?

[@ravensnflies8167]

holy shit! that is all.

[@apache2013]

Justin Phillips thats the online price, if you go to the shop it triples the price.

[@apache2013]

***** no mate, they do local made in here aswell, same quality like p mag but same price too

[@murphykenji]

Technically, polymer magazine feed lips are very hard to break. If they do break, it is easily visible and the mag can be discarded. Thin metal feed lips on metal mags can deform or bend a bit out of spec, rendering them less reliable in a way that is much harder to detect without a caliper. Bent / out of spec feed lips have long been the bane of aluminum / steel magazines.

[@CL-ty6wp]

hardened steel doesn't bend from dropping from a magwell lol. Reaching hard.

[@policies8534]

@@CL-ty6wpwell in the video he was comparing it to an Aluminum Stanag mag

[@newerest1]

@@CL-ty6wp and what about dropping it on a Rock. Or stepping on it.

[@mr.spartacus6390]

Take a drink every time he says feed lips

[@franklinstower6721]

.....only if you dont have to work in the morning......

[@oilhammer04]

The dust cover for the P-Mag takes the pressure off the feed lips.

[@DudeAutonomy]

One day, someone will invent a Pmag long term storage cover... and they will call it... a Pmag cover.

[@kilroywashere9343]

dustin hatch and... and... they do

[@dennisbanks706]

Yeah.... that's pretty much true you know right???

[@andrewmartin4387]

They come with the mag

[@aldo-228]

I think he's be sarcastic..

[@possumpopper89]

A couple of years ago I hosted a new years day shoot at my range. One of my buddies brought out his AR carbine and opened 3 brand new P mags to test them out. 2 of the 3 P mags broke off their feed lips and caused malfunctions so severe it required disassembly of the butt stock to get the bolt open enough to clear the multiple rounds that were crammed in the chamber and around the gas tube. We disassembled the carbine twice, once with each magazine. It was 19 degrees outside with about 4 inches of ice on the ground that day. I don't know if there was a flaw in the plastic or if the cold made the plastic more brittle but the plastic feed lips broke off twice in the same day.

[@kumarsalib722]

Opinion based advertising isn't a meaningful evaluation of magazine quality. Show some tests. Show some objective performance metrics. Your opinion means nothing without data to back it up.

[@HELLO-bc5bm]

pay attention to the beginning

[@CountryBoyPrepper]

kzbin.info/aero/PLuzM8PiPS-m0XbXj4fJ8IBRlPUhe9_SlS

[@HELLO-bc5bm]

Thanks man

[@kumarsalib722]

The 3rd and 4th videos were pretty good. I'm glad you went through with the tests and tried to give each mag a chance.

[@CountryBoyPrepper]

Thanks for watching all 4. After it was all said and done I wish I had titled this video "Why I WON'T Be Buying Anymore GEN2 Magpul Pmags". The gen3s are solid, but so are the Lancers.

[@BlaineLewis625]

Look up the test where they roll over a Pmag with a up armored Humvee, try that with a GI mag.

[@robertfoote3255]

Naaa! I'm stick in with my Gen 3's with dust covers. Can't be beat.....

[@CountryBoyPrepper]

kzbin.info/aero/PLuzM8PiPS-m0XbXj4fJ8IBRlPUhe9_SlS

[@roostershooter76]

I stopped sop porting Magpul over a year ago. Simply because I found out that they sue anyone who comes out with a product that even resembles their products slightly. There was one instance of them taking another company to court over putting out a prototype that had a window in the magazine.

[@bcoontz100]

Another advantage I have notice in the Lancer mags over the Pmags is the side catch. Like the feed lips, the side catch is also metal, versus polymer on the Pmags. Over time, the metal Magazine latch on the AR-15 tends to "round over" the upper portion of the side catch, causing failure of the magazines to lock into place. The mags, then, simply fall out of the magwell. Definitely not contusive to winning a gunfight. Plus, I also like the overall design of the Lancer mags, including the translucent smoke colored body. Going forward, Lancer mags will be my ONLY choice for AR-15 magazines.

[@mikecuntala9675]

Pmags come with a “dust cover” clip. If you leave the mag loaded and are worried about the plastic feed lips, keep the cover clip on your loaded magazine. It is designed to push the rounds down slightly taking pressure off the feed lips.

[@CL-ty6wp]

mine came with no cover

[@sydneybaker9303]

Knowing magazine quality is very important to consistent rifle function, I've not gone wrong with Colt OEM mags. It doesn't seem to matter much if the mag is polymer or metal, if it gets damaged it isn't going to work right. I do have over 20 pmag gen 3 for my Sig 556 (ak) and they run flawlessly. In my opinion, just get good magazines, not cheapies.

[@infowarguy]

USGI aluminum magazine followers can be replaced with non-tilt Teflon mix plastic self lubricating and are slick. Order MagPul replacement followers for $1.50 each.

[@brimmer555]

I have been interested in a fully transparent magazine setup, so I looked up the Lancer mags and ordered a few. Thanks for the tip.

[@jacksuquett1191]

polymer feed lips are actually stronger than aluminum. only talking aluminum USGI mags. now, when it comes to storing, the dust cover actually takes the stress off the feed lips.when you put them on, you can feel the round being pushed off of the lips. but I'd actually rather buy USGI as well.

[@gruntspy44]

transparent plastics are usually much more brittle

[@CountryBoyPrepper]

kzbin.info/www/bejne/hKGogKWKl9-Wm9E

[@CivilAffairsSgt]

I use and will always use USGI mage, for the reasons you state. I started using them when I first joined in 1985, and still use them in my unit today. I feel they are the best available..nothing against other companies who manufacture other choices, just a personal preference. I also still use the "old school" paracord pulls, and spray camo my mags as well (a holdover from my LRS/SR days I guess),since you mention you like the color of P-Mags, krylon the USGI mags,add camo patterns,whatever you like,it works fine. If you drop them thru normal use, the paint will of course wear, but you just re-krylon them time to time. They can take just as many knocks and drops as the "new" polymer types,and,are readily available. Same as you,they are good enough for me,especially since they haven't made USGI mags without 'anti-tilt' followers for some time. And, if you HAVE the old type GI mags, you can buy aftermarket anti-tilt followers (as well as spring assembly,floor plate ect) to install in the old type, so there really isn't any reason NOT to use USGI mags, Don't buy into the hype.They (GI Mags) work just fine. I have never had an issue,and, in all my combat deployments, never once had a issue with any of my mags.

[@CivilAffairsSgt]

Hey man,"If it works,why change it",it was what I learned way back, and I figure(d, "Why change what works for me". Glad it works for you too. At least there are two of us still doing that,lol.

[@asleepinthealley]

Since '75 and I'll stay with the G.I. they've always worked for me. The anti-tilt followers were an improvement worth the investment.

[@dennydavis2914]

Have you ever bent the feed lips of a old time steel mag? They won't feed at all. Polymer doesn't bend, it goes right back to it's original shape.

[@biggiesizer]

better to just to order ammo from palmetto and get 10 free pmags.

[@Texasdragracer01]

That was a waste of my time

[@slappy8941]

word

[@jagbender]

Yep

[@iDatedMyPizza]

why? was it a waste of your time?

[@IhateYoutube]

Drop a metal feed lip mag lip down on the concrete and do the same with the polymer lipped mags. The metal feed lips absolutely can bend (far more prone on aluminum USGI mags than on the Lancers with steel lips but still possible). I suppose under the right conditions the lips could crack on the PMAG but it's not likely. I think either mag is fine as are the Hexmags, and I just don't see the feed lips being that big of a deal. That's just my $0.02 though.

[@MindOverEverything]

I drop test fully loaded magazines onto concrete, right on the feed lips, to see how tough they are. My Pmag tester started cracking at the feed lip on the 4th drop, and by the 7th drop it puked out all the rounds. My Lancer tester has taken 30 drops with no damage to the feed lips. I did a lot more nasty stuff to that Lancer and it will not die. It is surprisingly tough.

[@IhateYoutube]

MindOverEverything have you tried the same test with a regular old USGI mag? I'm thinking the alloy lips won't hold up as good as the Lancer. Steel is certainly better than aluminum when it comes to the lips!

[@MindOverEverything]

I definitely agree that steel > aluminum. I haven't tried an aluminum USGI mag drop test because I am 99% sure they will dent to the point of failure on drop 1 or 2. I only have GI style AR mags in 7.62x39, and they are both pricey and pretty hard to get, so I don't want to sacrifice one. I pretty much only buy polymer AR mags in 5.56, but at some point I will probably get a pack of GI mags so that I can put one to the test, just to see how fast it dies.

[@IhateYoutube]

MindOverEverything I agree completely. :)

[@CountryBoyPrepper]

kzbin.info/www/bejne/hKGogKWKl9-Wm9E

[@FreyaKennafr]

The metal feed lips do make a difference in the long run. The pmags can stretch or warp, after loading a stretched pmag the rounds can just pop out. I literally grabbed a mag once out of my mag pouch and zipppp all the rounds pop out. Since getting out I’ve only had problems with 40 rnd mags. I just don’t buy 40 rnd pmags anymore. I’ve got plenty of government mags and several 60 rnd Surefire mags i can utilize.

[@LordDirus007]

I was in Afghanistan in a gunners hatch and the M2 50 got caught on a tree branch and ripped off the coopala and pinned me in the hatch. The 50 landed on my M4 PMag. It put a slight crack but the PMag still functions to this day. If it was a tin mag it would be done.

[@pehenry]

3:17 I don't agree. Aluminum and steel will dent and deform. Polymer will not dent. If it is hit hard enough where it would dent, it would fracture. But I never heard of anybody having that problem.

[@CountryBoyPrepper]

kzbin.info/www/bejne/hKGogKWKl9-Wm9E

[@MindOverEverything]

Pmag feed lips will crack if they're dropped fully loaded onto concrete. It took 4 drops to see the first signs of cracking on the feed lips on my testing magazine. The Lancer mags are a LOT tougher. I dropped my Lancer test mag, fully loaded, on the feed lips onto concrete 30 times and had zero damage to the feed lips. I'm sure it could take more, but I got bored, so I took a hammer to the lancer, and couldn't damage it. (The rounds in the mag got dented, though). So then I unloaded the Lancer, hit it some more with the hammer, threw it up in the air as high as I could and let it drop on gravel. I threw it HARD into a 500 gallon propane tank 10 times. I stomped on it repeatedly. The Lancer just laughed it all off. The mag still works, and whenever I shoot, I shoot that test mag first, then I throw it around a bit. Maybe one day I'll eventually kill that sucker...maybe.

[@larryleake9789]

@@MindOverEverything er rd

[@redhorse7458]

If you're worried about 7/10ths of an ounce of weight difference in your magazines you are waaaay overthinking this. Even in a heavy load out situation with lets say 10 magazines you're talking about far less than a pound of weight in difference. This is just bitch session video with no actual substance to it. The Magpul magazines will take far more abuse than the standard issue mags. Look at some torture tests between the two.

[@ItsEverythingElse]

I'll take a pound less any day. Pounds = pain.

[@redhorse7458]

Bitching about less than ounce of weight difference between two types of magazine is just a click bait video.

[@tommymadden8131]

i agree. you'd have to have 16 mags on you for that to even be a pound. Thats just looking for something to bitch about.

[@joeanderson4850]

Ya, tell that to nutnfancy...

[@drummerchef851]

My brother had problems with pmags as well, your video was spot on. We both use Lancer mags now.

[@ZDriver1996]

I know you said you addressed the metal vs polymer feed lips in part 2... But haven't watched it yet. 1.) Polymer is highly resistant to impacts, thus preventing denting if dropped etc. This is why I use composite constructed Rescue Jacks for vehicle extrication instead of the old metal designs. I'd put bets on the pmag holding up better being dropped and having the feed ramps damaged. But polymers, composites, metals have different strengths and weaknesses depending on many variables. Like a strong sword is forged out of 2-4 different metals.. where as many knives are made out of just stainless steel. you make a sword out of stainless steel it will fail, only being suitable for decoration. 2.) I have seen a magpul fail though. I have not seen metal ones fail but so few use them so they are not around for me to see. 3.) The lancer mags anti-tilt seems better than a magpuls but I have noticed that they do not like 300 blackout. I assumed that of the Lancers because the anti-tilt follower was less giving, it would help keep the higher grain heavier bullet from tilting down when feeding into the ramp. This was not the case. P-mags fed 300 black out reliably. 4.) The military has done extensive testing on magpul, lancers, GI mags, troy etc. A test was performed when the Gen 3 magpuls were introduced. The test favored magpul. Magpul isn't the only game in town many flavors to choose from. Good for us, keeps it competitive.

[@tidedownoutdoors5411]

Been running ARs for many years, both at work and play! I love the look and feel of those GI mags, guess there is something to say for nostalgia. But man, it is just damn hard to beat a P-mag. The original GI mag was/is designed to be cheap so it could be discarded on the battlefield. It was not designed to be thrown down, picked up, and re-used multiple times. Putting an anti-tilt follower in it doesn't change that. I use them both, but if someone told me that I could only have one type of magazine for extended use, it's the Pmag all day long.

[@tidedownoutdoors5411]

Awesome channel by the way!

[@robertjensen1048]

I'm not buying anymore Pmags. I already bought around 10,000 of them in the last 5 years and that should last me for life. :-)

[@jakeweston8616]

Great commentary and very objective ! Although I'm a magpul man, the trick to mag reliability is anti tilt followers, thats it. Polymer or GI aluminum or translucent polymer, as long as you have anti tilts, you are ok. But Magpul IS NOT the first to offer anti tilt followers. Stainless steal AR15 mags by HK offered anti tilts a decades before magpul.

[@saltysteel3996]

GI mags are hardened aluminum, not steel. I also run the PSA mil spec cage code mags. 5 years in the Marines and never had a mag issue with GI mags. The PSA mags have the anti tilt followers, mil spec springs that have been tested and rated, and again GI mags are hardened aluminum, not steel. I've had some loaded with 30 rounds of M855 for years and they're still perfect, function perfect, no issues at all. The aluminum starts off as sheet metal non hardened T0 rated, gets stamped into shape, then it's resistance welded, then heat treated to T6 forged rated per mil spec, then they're coated per mil spec and are stamped with the mil spec military cage code number. That's how GI mil spec mags are made regardless of which company makes them.

[@rodoshel4472]

Thanks...I agree 100% about the GI Mags...I bought older used GI Mags several years ago for $5 each and upgraded to the Magpul anti-tilt follower. I did take advantage of the PSA sale for $6.99 ea and got a few more. Like you said, I like Magpul but can't ignore the value of GI Mags...

[@rkba4923]

I've got 12, 30 round and 2, 20 round mags. I'll stock up on more from Battlefield America.

[@collinbarton5434]

Watch Iraqi veterans video on magazines. He put them all through the same tests, the pmag was the most reliable after being dropped, smashed, and submerged. The GI mag folded like a Pop can.

[@cretcher9419]

You apparently have never had to deal with a GI mag that is bent ever so slightly. I will never use GI mags ever again, fortunately my mishap was during a training event where life was not on the line. Running around doing drills in a military environment reeks havoc on those mags I have been thru many GI mags but I am still on my Original PMAGS i bought 10 years ago. I still don't know why the military still uses these besides the fact that they are cheap as dirt....

[@PaLEOjd]

That metal magazine you have is NOT a GI mag. What you have is a generic copy that is not as reliable or well built.

[@CountryBoyPrepper]

Really? Please explain how it's different. Have you used the D&H aluminum GI mags from PSA?

[@johnprouse4293]

If one of your biggest grips is a $4 difference then you have no idea. Any cal of Pmag in Australia retails for no less than $150. Count your blessings.

[@jerrycraig6522]

So John why don't you get a hold of someone in the states and ask them to send you some mags?

[@RalphReagan]

That's crazy

[@TRprepper]

I only have a couple of P-mags the rest are all GI mags. The ones that didn't have anti-tilt followers I replaced with the anti-tilt followers.

[@prisonerofknowledge4421]

...someone on the interwebz that understands magazine maintenance??? Whoda funkin thunkit?

[@vgoodwin2088]

I liked some of the videos from you and was going to sub. glad I seen this one before I did.

[@Crowder94]

I've got 5 or 6 gi mags from when I was in the army and I have 2 magpul mags. I have them all loaded and when I went to use 1 of the magpul mags, it didn't seem to want to lock into place. I had to give it extra attention to get it to lock up in the magwell... none of my other ones did it. tried it without ammo to see if it's the rounds fault. still had a problem.. all my gi mags are good and never had or have a problem with and I've had them for 5 years now

[@billjoe415]

I think he may had a little too much to drink and took a chic home that had polymer ramps A DADT moment

[@steveanbozek3589]

I like polymer magazines. Polymer is flexible and takes impacts well. they won't dent, or get as hot or cold with the weather. I think the Lancer would be the best AR15 magazine option but I have BCM metal mags and magpul. My next ones will be lancer. some 20 rounders and 30 rounders

[@CountryBoyPrepper]

kzbin.info/aero/PLuzM8PiPS-m0XbXj4fJ8IBRlPUhe9_SlS

[@kristopherfisk3917]

I broke the floorplate on a PMAG: after tossing it 30' in the air fully loaded. Floorplate cracked, BUT STILL HELD AND FED ROUNDS. I called Magpul to buy a new floorplate, as I broke it. They refused to take any payment and sent me one for free. For something that I broke. I've used PMAGS in Afghanistan and never had a problem.

[@seabee12333]

several years ago, by luck, I acquired a pair of H&K mags for a 416 (I think). These are the best mags I have ever used. Heavier gauge steel, smooth as butter followers, solidly built. If I lived in a state that would allow me to own such things, I would buy as many as I could find. No Idea of what mags like that cost, but I bet they're not cheap. Just looked 'em up-$65.00 each...WOW!

[@jamesbarca7229]

His comments about the feed lips has no basis in reality, his logic is backwards. The polymer feed lips are far superior. A long time ago (back in the 90s) I started using polymer mags (Eagle - made in Israel) and had some friends ragging on me about it. After getting tired of their B.S., I grabbed one of my mags and smacked it a few of times, feed lips first, on a wooden shooting bench. I then told my friends "Now do that with your (G.I.) magazines. "No way, that would bend the feed lips." was the reply. So I did it again, loaded a few rounds, and sent them downrange. "Now tell me again how your metal magazines are better than my "plastic" ones... silence. Some of those mags stayed loaded for years at a time sitting in my safe. Almost 20 years later and I still use those original Eagle mags (along with Pmags and misc. others) and they still function flawlessly.

[@footbalr074]

Yea so many people are stuck in the past "herp derp metal is better derp"

[@justkys1545]

+footbalr074 right

[@JohnSmith-ge7dw]

James, you are 100% correct on this and I fully agree.

[@FALPhil]

The spring steel Lancer feed lips will last longer without deforming.But it's not about the lips in my book. The superiority in Lancers comes when you drop a fully loaded mag from a second story and the mag lands on the lips. The P-mag will split down the spine and become unusable. The Lancer will bounce and be usable.

[@CountryBoyPrepper]

kzbin.info/aero/PLuzM8PiPS-m0XbXj4fJ8IBRlPUhe9_SlS

[@PW.6060]

I just have GI mags. Why? Because I don't have a lot of money to spend on expensive magazines. I'm pretty content with what I got.

[@JohnSmith-ge7dw]

And there's nothing wrong with that brother. I've used GI mags during my entire time in the military and have had great experiences with them. However if you do have the money and are in the means of spending it, I do recommend Magpuls. Again, the GI mags are perfectly fine and have given me great results!

[@neonpaintsplash]

Magpul makes an anti tilt follower for gi mags if you're interested, if not ignore.

[@cellblock776]

I have a box full of the old GI mags and have recently begun upgrading them with the Magpul no tilt followers. I can get a pack of 3 followers for about the same as a new pmag.

[@CinderBlockCuisine]

Pmags are made for people who want to get more for more money. If you're happy with what you've got, then you're don't need anything more. The ONLY important thing I think the Pmag has over GI is that it comes with the anti-tilt follower; Magpul has those followers for GI mags, but you gotta buy them separately.

[@footbalr074]

lol "expensive magazines" Pmags at my local store are selling for $9 right now. Seriously how much less can gi mags be.

[@LordDirus007]

In Afghanistan I had my M2 50 get caught on a tree and pinned me in my gunners hatch. The 50 cal slammed on the PMAG. A tin mag would of been destroyed. The PMAG had a slight bit of cracking but functioned 100%. So I stand by them. Battled tested!

[@Camopar87]

Not all new GI mags are anti-tilt. Check out Colt's because they're not. Also remember that using a steel mag you'll be using against an aluminum receiver and will wear out your receiver quicker. Poly mags hold up better than steel ones especially against impacts.

[@Radvous]

Aluminum and steel feed lips can bend and stay bent

[@sumdood6784]

Just a suggestion: Next time you get the urge to put a click-bait title on an 11 minute long video, please explain the title in the first 30 seconds of the video. Thanks.

[@brucenovotny5924]

Man, what a great video. Thanks for introducing me to the lancer. We even have 'em here in Canada. I'm getting my very first AR15 next week and I'm gonna spend some dough on the lancer mags ( iron sights and vortex 3x spitfire ). 👍👍👍

[@NotTheBomb]

From personal experience. I bought a Ruger mpr AR. The mag it came with was a p-mag. I didn’t like how much force I have to put into the mag in order to secure it. So I bought a gi mag. I had both mags loaded, too max, Incase I needed them for a home invasion. After having this for 3-months I finally got in opportunity to go shooting outdoors for 3+ hours. Out of the 300rds I shot that day. I received 2 double feeds with my gi mag with in the 30rds. Now I was running steel cased. However my Pmag had no issues and ran flawlessly. That alone makes me distrust the metal feed lips.

[@drburcham]

Midway USA has a 10 pack of Pmags for $79.99

[@Erxhyj]

Ahahah in Itlay with those money I can buy 2 Pmags... Europe sucks

[@sethhaney573]

I have to say, I think you're incorrect about metal feed lips being stronger. I have personally had metal feed lips get bent and cause the mag to malfunction. never had that from polymer mags

[@CountryBoyPrepper]

kzbin.info/aero/PLuzM8PiPS-m0XbXj4fJ8IBRlPUhe9_SlS

[@rileyen4608]

My best friend is a nano-molecular engineer. I asked her about modern polymers vs. steel and aluminum. She said that modern polymers have the potential to be much stronger and robust then metal. So maybe in the future we will have much stronger polymers. She said her lab is working on a modernized polymer that they hope to have the same tensile strength as t-7071.

[@cameronharrison6278]

I know this is an old video. But I left my pmags fully loaded for 3 years and took them to the range recently and they functioned fine. And the thing about metal feed lips if you drop them and they bend they'll stay bent. The polymer will flex and go back to it's original shape.

[@20x6Darkness]

If they suck, why did the Marine Corps just give Magpul all their mag business...

[@raddypex]

Because it meets the minimum requirements at the best cost. Just because the military uses something doesn't make it the best. Anybody who's served will tell you that.

[@carlvonfuckwits2934]

Philip cause they eat crayons. How much you want to bet when they did their tests they did it with DI ARs and not the M27 with suppressors? I want to see a hot gun on polymer.

[@mybsite5697]

Dan, I would argue all day long with you that a DI gun gets fucking hot especially in day long fire fights in Afghanistan and I have never come close to melting shit, with a suppressor I might add. As far as the M27 it runs cooler in the receiver not hotter personally I prefer Di over the M27 as more parts has shown to lead to more failure

[@JeepPatriot2010]

He did a torture test on different magazines

[@CountryBoyPrepper]

YES! CLICK HERE! kzbin.info/aero/PLuzM8PiPS-m0XbXj4fJ8IBRlPUhe9_SlS

[@JeepPatriot2010]

+CountryBoyPrepper thanks man I appreciate the link. Guess everyone has their preference. I respect that. I'm just glad you have an AR

[@JeepPatriot2010]

+CountryBoyPrepper and I appreciate your response to my post... You just earned yourself a subscriber for sure

[@CountryBoyPrepper]

Hey Thanks!

[@redpilledpatriot8484]

Country boy preppers rifle was one of the best looking rifles 7 years ago.. that Troy hand gaurd was what set the tubular handgaurd market a flame .. 2020 and AR15’s have gone so far since than with innovation and products.. changes in the AR market for decades was minimal , only more recently has it been set on fire .. which is a good sign!!!

[@rockyhooks3372]

Magpul replies and said “boi you ever seen them thermoplastics?!?”

[@thescscenario3075]

damn homie you have some OG big bugs screaming in the background. I paused the video thinking it was coming from my window..

[@late6812]

The SC Scenario same thing here only I was inside my family room Windows shut TV off and some loud bugs

[@indowinftw]

Always wondered this, can anyone tell me what bugs do that? It’s always been a mystery to me

[@plzhelpj2316]

magpul mags have caps in case you're worried about the feedlips, which has the added benefit of keeping debris out. Also, I believe everyone knew GI style is cheaper, especially after 2012. All in all I say one should consider how well the specific magazine fits the user's intended purpose and buy that.

[@jscott5091]

Did you ever think the problem maybe your gun. I have these magazines and they work great.

[@jscott5091]

I was thinking the same thing. I tested my Magpul magazines and they work fine.

[@nickknackintheforest.8686]

The army just switched to anti tilt followers in 2016 until then they had either no anti tilt or a half anti tilt feature. But mag pul sells just the followers. Which is nice because you can get 9 followers for $21 which you are issued 7 mags through the army instead of switching to P mags for $15-17 a single mag.

[@treefiddy727]

You're worried about P-mags for a shtf scenario but not your 300 lbs. Ok buddy...

[@tawmifm]

I'm not going to mention GI mag lips being bent more easily than Magpul mag lips snapping, but GI mag lips bend more easily than Magpul mag lips snap

[@CountryBoyPrepper]

kzbin.info/aero/PLuzM8PiPS-m0XbXj4fJ8IBRlPUhe9_SlS

[@5jjt]

I've hear some GI's say that if you front load your mags on your chest or belly, then you can bend metal feedlips, whereas the pmags return to shape. it's also known when the plastic lips crack, they still function. This is all hearsay. I've never used pmags.

[@vabch82]

You make some valid points. I agree that GI mags are lightyears ahead of what they used to be and ,also, that Pmags aren't the only game in town anymore. I, however, still love Pmags and will continue to buy them(when they're on sale😉). Respectfully🍻🇺🇸

[@Tula1940_LB]

I challenge you to break Pmag feed lips. Aluminum feed lips won't break but as soon as you dent them it's over.

[@thetobaccoguy1751]

A big part of my mag purchases, is investment. That said, GI mags are much more prone to blunt force damage, and rust. I've bent feed lips with one drop onto concrete. P-Mags are nearly indestructible and can be had for less than $9.

[@smartmonkey777]

Next time post your comment ( once ) then hit the refresh button, thanks.

[@cwheels01]

smartmonkey777 It's my phone. I only posted it once. I apologize for technology's incompetence.

[@CountryBoyPrepper]

kzbin.info/aero/PLuzM8PiPS-m0XbXj4fJ8IBRlPUhe9_SlS

[@thetobaccoguy1751]

***** The only reason Green Berets use GI mags, is they only have, GI mags. Using the military as a judgment of quality is asinine. Basically use your illogical police argument backwards. They use what's cheap and gets the job done. Not what is best. Magpul spearheaded the anti-tilt follower idea. Funny the military had to re-design their perfect mags after that. I've never heard a vet expressing his love for surplus mags. I have heard dozens bitching about the unavailability of P-Mags. There are a lot of reasons police departments chose Glock handguns. Saying the manual of arms is similar to a old S&W .38, is a bit of a stretch. Ok, it's a big fucking stretch. The primary reason is that in testing Glocks performed much better than any other option in their price range. Glock also had the foresight to offer huge discounts to departments in the beginning, and essentially started a radical law enforcement trend. Which indefinitely filtered down to a civilian craze. People always want what the SWAT and GI Joe have. It was an amazing example of business management and marketing. Yes, GI mags don't rust. I was stretching for a point. In the end it is a personal choice. Ultimately 99.9% of either of these mags will run fine. I would personally pay an extra $1-$2 for a polymer mag that I find superior in design, finish, and quality. As would 95% of the rest of the country.

[@cwheels01]

***** Dude, chill out. P-mags are fine and so are GI mags. Glocks are fine too. Hans was totally correct on that civilian rifles and accessories tend to be higher in quality than M&P rifles and accessories. You totally misunderstood part of what he was saying, too. Who cares about finish? Someone who spends their money on a product, and expects said product to look nice. Finish is part of overall quality. You seem to hate "plastic" a lot, something that tells me that you aren't a vet, because if you are, you don't seem to know a lot about SAWC. GI mags work, sure...so do P-mags. Just calm yourself, young one.

[@toastyghostyofdeath3909]

dang. 2016 feels like just yesterday. hard to believe its 2022

[@davidbrady1250]

Thanks for taking the time to go in-depth on what you like and why you like it. It's hard to say "I like roses" without people screaming "why do you hate daisies?!?"... I agree with most of your points, but I don't have enough data to consider myself any kind of authority. I think I favor the counterargument that a bent feed lip may pass visual inspection and then malfunction when you need it, while a polymer feed lip will fail spectacularly so you KNOW it's out of spec before you need to pull the trigger. That said, I really like those Lancer mags; may pick up couple. Thanks for posting good info!

[@glenwood89420]

I've left steel, Aluminum, and polymer mags loaded for extended periods of time. I've had severe problems with BOTH steel and aluminum feed lips bending over time and causing constant fail to feeds. The polymer mags have had almost no problems. This is still the same groupthink of the resistance of polymer framed pistols over the past few decades. News flash! The polymer framed pistols hold up BETTER to extreme punishment than the "super strong, ultra durable" steel framed pistols...

[@Steven-gv1ke]

I couldn't agree more. I remember back in the 90s when this company made a big splash with "plastic" guns, and all the 1911 carrying guys said how they were a piece of junk and the plastic would break, and they are not trading their ultra reliable unbreakable 1911s for some piece of junk plastic gun... that companies name was *GLOCK*

[@tf2965]

lancer is a pmag but better. hahahaha. its the Gen 4's in my mind. you can easily check how much you have left in a mag, better than that retarded half window, similar weight, and then BAM feed lips that don't loosen up after 3 months of being left loaded

[@CountryBoyPrepper]

weight is not similar. 6:48

[@mebibyte9347]

I know this is an older video, but I'm doing some research while looking buy some cheap mags in bulk just to have as a backup, thank you for the information in this video, I was not aware of the updates made to the GI mags. Hopefully they still go on sale like you mentioned.

[@PatRiot-]

adjusting red dot in my house having trouble with my gi steel mag loaded 30rd wouldn't seat in rifle 2 times and fell out once on carpet then dramatic fall from shoulder height onto wood floor (basically concrete etc..) bottom plate of magazine came loose from 1 of 4 metal prongs and is sitting above the prong it should be under..... took a minute with a flathead to pry and put back under and still works fine (probably did work without the prong fix) that is my experience with my gov issue mag so far now I'll have to drop my p mag as that way as well but I don't want to break it XD

[@SmoothdaHustla]

Oh you're crazy alright, crazy like a possum! All things being equal… Well they're not equal the Lancer costs a lot more and if you leave either loaded for 20 to 30 years I'm pretty sure your spring is going to cause you some issues regardless if you have magpl or Lancer.

[@Meadsapiary]

Studies have shown springs do not degrade from being compressed, they degrade from use. repeated compression and expansion.

[@therealjohnsmith4811]

Constantly compressed springs, to max compression, for extended periods of time acquire a new "set." Which means they don't fully expand. mcb-homis.com/magspring/

[@AnAZPatriot]

If you are loading a 30-rnd magazine with 30 rounds at storage, you are doing it wrong.

[@toddmccravey3011]

"I'm done with p mags" "I'll still be buying mags from Magpul"

[@glenchamusco2380]

Pmags have lifetime warranty, that is the reason why I prefer them.

[@jamesfairservice2391]

In my experience the GI mags feed lips get all bent up fairly often, but all you do is whip out your multi-tool and bend them back. It won't look pretty and crisp anymore, but it's not that hard to do either.

[@InGratitudeIam]

Gen3 Pmags are the only way to go... just ask the USMC.

[@legoclone0965]

What differences do the G2 and G3 pmags have? All I've noticed is the dots on the side instead of where it says PMAG 30, never handled them in real life, though.

[@cjs19kilo]

Why so many down votes (398 downs to 758 ups, as of 25JUN16)? Valid points made, and I still plan on using Pmags. Magpul fanboys act like they own stock in the damn company.

[@Genevasuggestions1]

I agree, magpul fanboys need to get out more often.

[@hairymeatloaf]

Maybe it was because he is saying "OH" instead of zero when talking about the weight of the mags.

[@rusticspoon6103]

I think there are many down votes because his logic is backwards. Aluminum mags aren't going to be better because the feed lips will bend and ruin the mag when dropped. Polymer, as well as the steel of the lancer is less prone to this. The GI mags are good for cheap range mags, but the Pmags aren't much more expensive. The lancer kinda suck cause they come in at like $20 a pop, but otherwise they're nice mags

[@cjs19kilo]

You're argument is the Lancer sucks because it's more expensive? A product cannot suck simply because of its price. Your job can suck if you can't afford a few $20 (actually $16 if you look) magazines.

[@rusticspoon6103]

yes. My argument is that it sucks that the lancers are so expensive, otherwise they would be a closer competitor to the magpul Pmags. When you can buy a box of 100pmags for 8.99 a mag it's hard to look at a mag that is at least 7 dollars more expensive "if you look". That's almost 2 Pmags for the price of one lancer. If I was as rich as you did buy assloads of lancers. Sorry we all can't make the kind of money you do.

[@ItalianAvalanche]

Super valid points. Good vid.

[@ThatDarnTurtle]

I love how people say metal feed lips bend... You can bend metal back into position. It may not be as durable before, but if youre in a desperate situation and your feed lip got banged up, you can bend it back with your multi tool and use it again. Plastic cannot bend. So when your plastic breaks, your mag is done...

[@calebclark6739]

I will stick with Magpul. Video was a waste of my time.

[@paulschmidt1247]

Iraqveteran8888 did a torture test on ar15 magazines and the lancer did not make it out of the first round of testing, I suggest everyone watch that video.

[@sportsfan2711]

I had 2 pmags that I left loaded for 3 months. I went to the range and went to use them and my bolt kept passing over the round . I looked at pmags and they ones i left loaded split at the feed lips.

[@fullfire0]

The thing about metal feed lips in a polymer body magazine is that, that creates a weak point. The metal is molded into the plastic. Just creates an area of weakness where the metal can separate from the polymer. For someone who is worried about dropping polymer feed lips and toughness of feed lips overall that seems like a no-brainer. Dropping the lancer mag feed flips first could potentially separate the lips from the body of the mag.