Why isn't this on every tractor? New Technology that makes life easier!

[@hudsonvaganis7855]

for $450 I will pass I guess i'm the only one that doesn't really have a problem pushing the pin and sliding on the pto as long as you spray wd40 on it. It always works for me. If it was like $50 i would try it but I don't think it will save me that much frustration for $450

[@randyblackburn9765]

$450 wow ! No way , funny thing is I always thought the PTO shaft hookup was already simplified.

[@roundman-1972]

i think it is would make it easier but for no more than i use pto shaft connection at that cost i agree with you

[@NoBite2]

I agree with you! I got really excited, until I saw the price! Now, even if I skin a knuckle doing it the old fashioned way, I’ll be thinking of the money I’m saving! So, for that piece of mind, thanks for this video!

[@jeffstrains4014]

Yeah I agree, if its oiled straight and not bent very little effort. That is not going to fix those issues lol

[@Metallas]

Honestly I don't have that much issues with it myself. Grease is your friend, Grease the splines the shaft and universals well. If you cant rotate the shaft well lift up the implement, it might just be bound up sitting on the ground. Or need to see where all that drag is coming from something may need some tlc. I certainly cant justify $450 that can go towards something else I probably need much more.

[@amossnowdaharleyman9179]

Orrrrrrr: keep your PTO shaft clean and well lubed and the shaft coupler will slide right on..... One thing I don't like about the coupler doodad is that the mechanical connection seems loose and sets up a vibration.

[@StoneyRidgeFarmer]

been using it for 2 years without issue my brotha....that's why I waited, I was skeptical at first too. It's not a doodad, it's technology that saves your back and shoulders and hands. We take for granted that everyone has strong hands like us...but as we age this gets harder and harder on our bodies

[@amossnowdaharleyman9179]

@@StoneyRidgeFarmer hit 60 the other day and yes, age takes its toll and really pisses me off/makes me mad at my wore out body.Don't forget to separate the PTO shaft sections and lube same with a good grease at least annually. Had to replace shaft assemblies on used stuff I bought over the decades because previous owners never did that simple but dirty task.

[@jeffseverythingtv8416]

Or maybe the tolorence is out by a mm and it's a bitch. All the grease and lube in the world won't help if things are a tiny bit out of spec.

[@brandonburdette7895]

That will be so handy for my dad because of his arthritis his hands don't work good anymore so he will be able to put his Bush Hog on by his self again he's going to love that thank you Josh

[@StoneyRidgeFarmer]

Same here brandon! Dad's getting one for his B-day

[@mikecioka1180]

When you hook it up with the 3 point hitch just lift it level so you can easily turn the pto shaft to fit perfectly in you pto connection. It does not takes 30 seconds to do it

[@michaelfoucht8830]

Honestly I didn’t see a difference when using mine. I thought it was harder to line up the holes than line it up like normal. I don’t like it but that’s just me🤷🏻‍♂️

[@HomeWithTheBuffingtons]

I have been looking at those. My biggest challenge as a new tractor owner has been connecting that dang PTO shaft. Sounds like it would be a good quality of life product for many different folks.

[@rubicon10a54]

I hate hooking up the PTO! That looks awesome! I’m buying two of them! Love this channel, keep up the great work!

[@weijingburr2392]

You are a SUPERB salesman, I don't even have a tractor but I could see the need for one. To be clear, in my opinion, a good salesman, sells a good product worth selling, and sees the utility of the thing and that's what they sell. Never the thing itself. Superb.

[@martineastburn3679]

I've had one for several years - they are GREAT !. Simply put the one on the tractor and the other goes on an implement. Change implements ? change the part. Easy when you simply do it on the option. Now no pull back and push at the same time to get the spline aligned. J. DEER is selling a like version now.

[@peteduncan921]

I have definitely had a lot of problems connecting and disconnecting pto shafts on older equipment, so I can certainly see the benefits of a system like this. However, at $370 plus shipping cost, the price is a little outside of my comfort zone. These days I'm working (infrequently) with a new tractor and a new rotary cutter, and having less trouble making the connection. If I was still using the older equipment, or making the pto connection with a lot more frequency, I would be tempted to try this product.

[@greggjohnson7667]

Yeah it's pricy but if you have physical limitations it might be worth it. Lost a lot of use in my hand suddenly so Im gonna try one. Thanks SRF!

[@leokelly7933]

I've had the pto link for a while and love it. I was put in contact with them when this was 1st being developed. with me a functional quad, I'm unable to hook up my pto implements. I usually have to have the wife do it. she likes this way much better

[@rdblan2]

Looks like a solution looking for a problem for me for the price. Little wd 40 on the shaft and/or a paint marker is almost free.

[@memyselfandifarmer]

Tip= i put a paint mark on the tractor pto, then put a paint mark on every item on it's connector. line the marks up- done.

[@StoneyRidgeFarmer]

I'd rather rely on the shaft locking into place than the mark...it would be horrible if the shaft slipped out

[@dakotahughes3003]

That's a little pricey for me I'm good I'll stick to the normal way lol

[@gwaynel8363]

Twice as hard to hook up on a compact tractor. I bought one several months ago and love it. I change the end on the pto shaft to keep from buying so many. All the best from Greensboro NC.

[@richardstarke4093]

Would be good if you coi0

[@richardstarke4093]

Would be good if you could buy extra halves to fit other implements so you do not have to change that end.

[@deanbarr5740]

Easy peasy, I like it. Thanks Josh.

[@johnsadler8637]

I guess I grew up with the regular pto connector. I’ve seen this one on Ask Tractor Mike (I think), but I haven’t had such a hard time with the regular one that I’ve felt compelled to make this leap. Having to shorten a pto shaft to make it fit would be a big downer for me.

[@hunterjacobs2178]

This thing is a waste of money imo

[@StoneyRidgeFarmer]

If you order a new implement you will most of the time have to adjust the length of your PTO shaft my friend...it takes literally 2 minutes. I may need to do a quick video on this so folks can see what the dealer is doing for ya before you get your machine. I think we need to question this technology and move to something more modern like PTO link type connectors on newer machines

[@hunterjacobs2178]

@@StoneyRidgeFarmer I've seen them before. But for me atleast its really easy hooking them up without anything special. Just my opinion

[@johnsadler8637]

@@StoneyRidgeFarmer I guess I’m more used to buying used equipment, so what a dealer does has rarely been on my radar screen. I have an override (not live pto) so already have something about that size between the tractor and implements. The one thing that didn’t fit required me to remove the override. I don’t see how that implement could have an easy shortening of its shaft - either cut and weld or buy a shorter one. Back in the day, when we cut and baled hay, I had to swap a conditioner for a rake and back on a daily basis, and our baler, combine, sickle bar mower, and later the mower-conditioner were all pull-type pto equipment, so I got a lot of practice. 😉

[@rfb7117]

Please do a video on the correct procedure for shortening the PTO shaft!!! I think it is a concern for many of us.

[@davemanone3661]

this is what aftermarket parts are for. an improvement on factory technology!

[@FiremanCH87]

You’re going to have to remember the double check that your pto doesn’t bottom out.

[@ryanradz]

I think that’s why he could not get it disconnected from the adapter you can see it bottoms out, hopefully it does not jam up when using it

[@houstonfirefox]

I agree, seems like it adds a few inches to the PTO shaft. Could bust your PTO housing if the implement is forced upwards (i.e. tractor going up onto a trailer with implement dragging). Nice concept though!

[@peteduncan921]

You definitely need to check for that, and shorten the shaft as much as necessary. I bottomed out the shaft once on an old John Deere 65hp tractor and bent the pto splined shaft inside of the tractor. I had to spend about $1K to replace the parts. It was my own fault for driving the tractor/mower through a gully that was too narrow and too deep, but it was a lesson learned the hard way.

[@needstacos4892]

You find all the cool stuff. Love what you do

[@miker8915]

What a life saver. Thanks for sharing!!

[@ΧΡΗΣΤΟΣΧΡΗΣΤΟΥ-λ5φ]

love tool Tuesday Hello from Greece

[@chrisgrindy3343]

I just put on a set of Pat's EZ change on my tractor and found that the shaft on my tiller is now 2 inches short. I think this will solve that problem.

[@batpherlangkharkrang7976]

Hi..... Thank you 🎥👍👍👍

[@allenhenry1113]

Very cool tool. Yes fighting those pins. Hard to keep mashed. Great clip!!!

[@critical-thought]

It really looks like an awesome product. But if you have only just a few PTO implements, you are quickly into it for $1k or more. I have already figured out how to connect/disconnect shafts with minimum fuss, so thanks, but I will spend that kind of money elsewhere.

[@raymondfrye8847]

Great idea. Thanks for the information.

[@MyClutteredGarage]

I’ve seen these advertised and I was skeptical. Nice to see some real world tests. Nice job, Josh. -Ed

[@charleswise5570]

This is slick! Daniel Arms should get one for his new tractor.

[@jordanharris5435]

Love it, bc we fight with that pto shaft all the time!

[@backachershomestead]

So I cannot keep telling my wife I need a tractor for every piece of equipment! Thanks Stoney Ridge! Lol

[@vincent7331]

Amazing Josh! Will be getting one!

[@Yvonneb_]

Hi. I am just getting over a frozen shoulder, I'm just suffering sciatica but I can see how that would work and how it would be easier. Xx

[@jasonbusch3624]

PTO for dummies, just use a pair of leather gloves. What a waste of money. Clean and grease your PTO shaft and it will work fine. The PTO link took longer to take off than the original. No need to reinvent the wheel.

[@hunterjacobs2178]

Exactly

[@StoneyRidgeFarmer]

lol....the install is a one time deal...then all you have to do is slap it together buddy...it stays on the tractor. You and I have both struggled with rusty, greasy and heavy PTO shafts...if you ever hit up a farm show...try one you'll be pleasantly surprised...I know I was for sure. Folks are always gonna be down on new ways of doing things....especially on the farm, we're all doing things the way grandpa did them and there's better tools and tech out there now my brotha. Test one out if ya get a chance

[@hunterjacobs2178]

@@StoneyRidgeFarmer I am not trying to bash you or the product. I love your videos. I guess because I'm younger I dont know the struggles of messing with one. I've always found it easy to attack myself. Love the vids

[@jasonbusch3624]

@@StoneyRidgeFarmer I degrease the PTO shaft then with a wire wheel on a drill and steel wool or a scotch brite pad clesn off the rust. Then grease it up. PTO shaft maintenance is easy. What happens when you want to borrow a piece of equipment and the shaft is too long and the easy peasy coupler is on the tractor for the last 5 years and you can't remove it because it is rusted on?

[@rockandrattleretreat5830]

Still looks like you have to turn the pto shaft to get it on, and I have an implement that I can't turn the pto shaft at all....

[@FarmallFanatic]

My brush hog is HD and so is the pto shaft. I struggled last night...this will be handy 👍

[@gaylemathews3062]

Get yourself a John Deere, they are easy to hook up! Using Farmall tractors almost put me out of the farming business! All green now!!!!!!

[@FarmallFanatic]

@@gaylemathews3062 how'd they almost put u out?

[@StoneyRidgeFarmer]

Green paint warriors are very open minded lol. I grew up with red tractors 🚜

[@chelemichele1524]

That's is so cool... Have a good day 🌷🌷🌷

[@lawsonlawnandfarm8073]

To me that looks more difficult than the regular shaft. Seems like a solution to a problem that never existed. Just my opinion though. Keep it all lubricated and never have a problem

[@toterola451]

My wife bought me a 2 implement set for my little Kubota. It's expensive, but I'm going to avoid shoulder surgery for as long as possible.😉

[@Hfoutdoorsyt]

Nice adapter. PTO shaft connection is literally the worst part of owning a tractor

[@shanebiggers8437]

Hooking up 3 point with out my quick hitch is what kills me 😂. I rather hook the pto up 12 times rather than line the arms up once 😂

[@wildbill23c]

I actually figured the worst part would be hooking up 3 point implements trying to get the pins put into the lift arms and top link?

[@mopedinthemalverns6661]

I think it looks great. I can see how it would keep you from having to bend and stretch and heave to get a PTO on in the rain. Once you put that back out it's out for weeks.

[@TheDealDepot]

This is a great video! Hooking up the tiller can be a pain sometimes for sure!!

[@StoneyRidgeFarmer]

Definitely!

[@michaelbryan2474]

Best things I've seen in awhile

[@mooseoxtank]

My Kubota MX5200, connecting the heavy brush hog arm is a PAIN IN THE BUTT! This would be wonderful, but debating the price as well as a lot of people are commenting.

[@StoneyRidgeFarmer]

how much can you really buy with a couple hundred bucks nowadays? 2-3 bags of groceries? This is a lifetime purchase and is well worth it for saving time and your back...just my opinion

[@wayne12735]

Keep making banger videos Josh love the channel

[@danielcouturier6037]

.... one word - GENIUS

[@WILDBILLSOUTDOORS]

On some implement/tractor combinations you would have to cut your pto shaft down a few inches for this to work. We a have pto tiller that we had to shorten the shaft just get it to hook up, and that was for my Dad's tractor a 45 horse New Holland, only way I can hook to it with my Kubota 2800 is I have to hook up the pto first and then hook up the 3 point. It's a major pain in the ass, and my Dad bought it brand new about 3 or 4 years ago, one of those kinda things that you would love to slap some sense into whoever engineered it. This quick connect system is gonna add 2-4 inches and I can see it causing problems for some folks just like we have with that tiller.

[@jessicaryan8518]

As a female farmer definitely looking at getting one. Thanks for the video

[@jeremykirk1805]

For the price of these I will keep hooking mine up the old way! Looks like good product but way over priced.

[@katiejohnson2189]

Just watched Mrs. Stoney Ridge Farmer and recognized the same tendency in her to not know her feelings and not feel comfortable saying them.(I assume) It took me years of therapy to recognize this b/c it was hidden behind an anxiety disorder but knowing my feelings and learning what to do with them and then how to talk about them wasn't that hard and I'd be happy to be a resource. I've also identified w/the raised by narcissistic parents on Reddit (my husband actually pointed it out/suggested it to me). Anyway, could not APPLAUD you both enough for being honest about yourselves online!! I just know from experience that talking about it is a great START but then knowing where to turn for more help is the next step and you may have to try a few things to figure it out!!

[@andrewscott2866]

I'm really having trouble seeing the value in this. I'd probably be looking at 3pt quick hitches before looking into something like this.

[@StoneyRidgeFarmer]

perfect for use with a quick hitch....lengthens your PTO shaft for proper fitment

[@jonathanwalkup4010]

All you have to do is spray some pcl on the inside of your drive shaft once or twice a year depending on use and keep your spline clean you won’t have trouble

[@CarsonRH]

My God you mean maintaining equipment make it work better?

[@jonathanwalkup4010]

@@CarsonRH strange isn’t it

[@StoneyRidgeFarmer]

Sarcasm helps I’m told Bhahaha

[@whome9936]

I think the nay sayers are missing the point. This increases the visibility of the work, and it eliminates the need to line up splines by feel. It also moves the connection point away from the chassis, which can be a tight space to work in, especially on compact tractors.

[@StoneyRidgeFarmer]

wherever there's something new and innovative...there will always be nay sayers....wherever there is someone successful....there will always be haters too....I love the PTO link and have it on all my machines!

[@GoodOlBoy1976]

Very nice I need to get them for both of out tractors.

[@brucealvarez9263]

Where is the end of the PTO shaft relative to the safety shield (which is not installed on your demo tractor)?

[@RoderickGMacLeod]

WOOOOOOO! The word of the day is "detent". de·tent /dəˈtent/ noun a catch in a machine which prevents motion until released.

[@curtwhite876]

Seems like all you should need is the spring collar on the tractor end of the PTO shaft, that way you wouldn't have to press the detent. Still a slick adapter though.

[@andrewd4890]

If you have one tractor and five implements, you would not need five complete sets of this device, just one on the tractor and five of the other half. Hope they offer it that way. I only take my slasher off the tractor when I want to use the post hole digger, about once a year. Can see the benefit of this device, you still have to hold the weight of the pto shaft while hooking it up. Knowing how it works is a major factor in releasing the pin on the standard coupling. Once I figured that out it was a lot easier. Keeping the PTO shaft lubricated is also important so it slides well as it expands.

[@StoneyRidgeFarmer]

yep exactly

[@RobertJones-ey9qz]

That's the thing I asked you about a year or two ago where I thought you were doing the advertisement for them. The guy doing the ad sounded a lot like you. You said then that it wasn't you, but you were going to be reviewing it in the future. Its been long enough since then, I thought I had missed it. While I'm on here, I have an old New Holland square baler, (no manual) I think it's out of time. Any idea how to figure out for sure and get it back in time? Another interesting video, keep them coming. Have a good day.

[@mattkreis6996]

I have a woods 990 finish mower. Cant turn pto shaft by hand. I have to put a bar in the u joint. Slips on really easy once lined up. Would that help or still have to us bar?

[@srt8speed]

So you can’t move the driveshaft side from implement to implement? You have to buy an implement side for each one of your implements??

[@shanebiggers8437]

Wooo for 400+ dollars I’ll just keep her lubed up and using the original connection! Looks like a pretty cool setup though I’d be curious to see how it worked on a cutter when it hits a stump or something... I obviously don’t expect you to go out and do that on purpose though!

[@KPVFarmer]

I see I missed this one… How has the PTO Link held up for a few years? Any update on the good, bad, and ugly? Thanks Josh! 🇺🇸🦅🇺🇸

[@StoneyRidgeFarmer]

It's worked great...no issues what so ever....accept.....I left one in the tall grass and hit it with the lawnmower!! That broke a spindle!!! Duh moments lol

[@bufkinmanor]

Looks like a good gift

[@bufkinmanor]

Until I looked up the price tag, wowza

[@StoneyRidgeFarmer]

I guess putting it into perspective, we'll buy a cell phone that costs $1000 and a flat screen TV that costs $600. I think it's well worth the money..I'm buying one for my dad next

[@knowhereman1]

The added 4 or 5 inches in length would help compensate for a quick hitch system.

[@markmarquardt8016]

Thanks for posting. Options are always good. Made in the USA? Even bettter.

[@vinniedeandrade6073]

I forgot to push the pin down when I connected my implement (bush hog) to my tractor. It began to spin and then BANG, it stopped. There is nothing visibly broken but now it does not spin and the PTO Light is blinking. What could have happened? Is it a simple fix?

[@scottstoutes4603]

I'm starting a farm in Louisiana and use my tractor slot. How do I get them to send me one of these to review?

[@StoneyRidgeFarmer]

I guess get 150 million views on social media lol

[@2002dkallam]

Going to have to get one of these for the MF 35 deluxe. Pops will appreciate it

[@matthewclark6037]

Good stuff buddy

[@blackhawkinternationalsecu6962]

Josh, you need to more enthusiastic about the PTO Link. Its like sliced bread, nothing greater. Currently, I only have a tiller that uses my rear PTO on my Deere 1023. But hooking the PTO up was always a pain, not to mention the tight space to work in. The PTO Link is one of the best accessories I've bought for my tractor. Better than the seat cover! 🤣🤣

[@harleythrelkeld7587]

would there be any power loss from this, like with an impact gun any extra connections have some power loss

[@rubenmanitowabi]

Definitely ordering one of them suckas! Pretty dang slick

[@randyblackburn9765]

Redundant for me , but some folks might need it . Where is it manufactured? Time will tell if it holds together if it doesn’t , it’s shrapnel.but thanks for for showing.

[@Moselli56]

Another fantastic video! Thanks much! Always great content and thorough!

[@jalopyjoe4483]

Was hear. Looks handy. Wooooo!

[@ProjectsWithPaul]

Cool adapter!

[@dmorgan28]

I really like that PTO shaft. Pretty cool. Thanks Josh👍👍👍❤️

[@haywoodmember1452]

Where can I purchase a ROPS and canopy for a MF 240 just like that one?

[@buddymorgan2351]

What is the smallest size tractor u can use it on

[@petermavus4131]

PT...Oh so nice 👍 now

[@anthonywalls3281]

That is a good tool I wouldn't mind having one the only thing that would make it better if it didn't cost so much.

[@davidgregory3643]

Lubricant shaft coupling regularly you won't have trouble and save yourself a fortune 😉

[@holg3070]

When you have arthritic hands, it's very difficult to depress the pin. And do any of you "nay sayers": have any idea the cost of buying metal ? Machining? Painting? Distributing? Shipping? etc. This is a well designed tool that helps people.

[@StoneyRidgeFarmer]

it honestly does!! and the quick attach working in hand with it is super awesome!

[@444powerstroke]

Sorry, but the price isn't anywhere in the ballpark for this.

[@StoneyRidgeFarmer]

Money won't save our backs....and won't buy us a new one...but it will buy the right tools to keep us out of the doctor's office my brother

[@dozer69643]

What's up stoney ridge!

[@jeanniearnold7906]

You trimmed your beard !! So much better.

[@StoneyRidgeFarmer]

lol...thanks...it's getting hot out!

[@markturner2065]

I can see pros and cons with this, if the pto shaft doesn't extend easily or becomes somewhat seized it could become a U joint demolisher

[@averageoutdoorguy2737]

That’s awesome

[@DPCCGM]

That will make the best doorstop to keep your shop walk door from slamming in the wind. Better JB weld a little keeper chain to that pin, after that gets dropped for the third time(I know all to well how arthritic fingers hold small things) that whole adapter is gonna fly further than a NFL quarterback can throw a football. At that price you could pay the neighbor kid a sawbuck and a chocolate chip cookie to hook\unhook for you. Just having' a little fun with ya SRF.

[@BubbaGooder]

That darn'd ole PTO connect'n jeza 'bout duz me in evry time. I'ms gunna go gits me one of dem...fer sure! Thank ya Josh! I'll tell'm you sent me!

[@StoneyRidgeFarmer]

lol...love the picture bubba...use that coupon if you decide to get one for sure

[@BubbaGooder]

@@StoneyRidgeFarmer Oh yehaw, me and coup'n go's 'gether like peanut n Jelly... will do.

[@48wilber]

seems like more of a PItA than the regular ,, plus you have to worry about not dropping that pin.. (Plus--- show that after 4-5 years after it get's rusted/wore out)

[@bubbaramsey3732]

I keep WD-40 on all my tractors. It makes hookup easy. The biggest problem I have is the PTO shaft sliding if I don't keep them oiled or greased. I don't think I would get any benefit from it because I keep my shafts and hookups working slick. Just wipe the dust off the PTO shaft on the tractor and spray with WD-40. But I can see how some people would be happy with it.

[@hturbo1007]

Everyone please be careful of what piece of equipment you use it on. By using this device it shortens the PTO shaft on the equipment. The pto can bottom out going through dips or making tight turns.

[@tomandolina383]

Shortening the pto shaft may not be necessary if used in conjunction with a 3pt quick connector.

[@hturbo1007]

@@tomandolina383 I'm talking about equipment like a haybine, baler manure spreader etc. A three point hitch machine shouldn't be a problem.

[@StoneyRidgeFarmer]

Yessir that’s why you make sure you have appropriate travel on any implement takes 5 minutes to adjust a PTO shaft length my friend. Very good point

[@gregwitkamp5583]

doesn’t hurt to put a few drops of oil on the shaft and keeper pin once and a while, even on that attachment

[@jamesbaker9383]

Seen it before. :)

[@StoneyRidgeFarmer]

hmm...I don't think you've seen my video before lol

[@jamesbaker9383]

:), Not your video,,,,, the product. Wish I had it a LONG time ago.

[@brucebachtel5601]

Where's the link?

[@UndecidedHobbies]

Don't forget to potentially have to shorten the shafts. And then if the product fails the shafts could be too short to go back to the old way.

[@StoneyRidgeFarmer]

yep...mentioned in the video brotha....honestly I don't think anyone would go back the old way once they try this...it's awesome..again...I'm not selling them..I just think its super handy

[@brian_2040]

Josh, I got a question kinda off topic. That tarter cutter you have. Do you like it? Please be honest cause I have a story about one.

[@StoneyRidgeFarmer]

Mine cuts great

[@brian_2040]

@@StoneyRidgeFarmer well I got a frontier, same everything except the color. From the day it was new it's always cut half of the stop. Deere wouldn't do anything for me either

[@StoneyRidgeFarmer]

frontier isn't tarter as far as I know....Frontier brand I believe is Woods...ask your dealer. I'm not sure what "half of the stop" is...slow down and keep blades in good shape maybe...I'm not sure what ya mean. Tarter isn't frontier though

[@brian_2040]

@@StoneyRidgeFarmer I work for a Deere dealer and woods makes a few of the grooming mowers, but the frontier cutters are made by tarter. They look identical except the color. And I had new blades on it, I ended up selling it and it still does the same thing. By the way I mowed at 3 mph to 5mph. Nothing helped. And on top of that the place I bought it from refused to help me.

[@brian_2040]

@@StoneyRidgeFarmer I appreciate you getting back to me on this topic. It shows how good of a guy you are. Thanks again.