I just want to say thank you so much!! I love watching your KZbin content it’s always very informative and fun to watch! Keep it up 👍
@gnutzguy3 жыл бұрын
Thanks for the mind words, I do try. Thanks
@gunlovingcanuck32194 жыл бұрын
I hope they get the rifle models back in stock soon I really want one
@gunlovingcanuck32194 жыл бұрын
@@5149111 well I guess I'm buying a M+M then
@carlgustaf39794 жыл бұрын
There is gonna be one more shipment of the 81 LMG’s
@gunlovingcanuck32194 жыл бұрын
@@yili8730 hopefully they bring in a big shipment so they don't sell out right away
@51491114 жыл бұрын
@@yili8730 do you have a link to them coming back in 21 or 22 ?
@1991tommygun4 жыл бұрын
Yi Li you sure about that?
@TheRealBatCave3 жыл бұрын
They had the phosphate this round as well, they more shipments r still coming. Ur channel is underrated man. Good vids
@gnutzguy3 жыл бұрын
Cool, thanks
@AlienCatcher234 жыл бұрын
I managed to grab two yesterday!!! Super pumped to get them to me. Will most likely try to source a straight rifle model and sell one of the LMGs that way I have one of each.
@gnutzguy4 жыл бұрын
congrats, welcome to da club... a shipment of both blu and park LMGs coming in dec and rifles coming late next year.
@AlienCatcher234 жыл бұрын
@@gnutzguy have you had a chance to measure deviation on the LMG? Curious if they are slightly bent also or not... am really debating even bothering getting a rifle model with all that I am reading and seeing about them at this point...
@gnutzguy4 жыл бұрын
i would measure only if it were severe and both of mine are fine. i looked at it again visually and they are acceptable to me, maybe a slight deviation. my previous rifle was so severe that it became bothersome. the thing is not all rifles are severe so before you buy ask the seller, he cant lie about it being severe cos its too obvious to the eyeball or wait till for the new rifles coming in late next year. i bet they would be fine like the LMG.
@AlienCatcher234 жыл бұрын
@@gnutzguy doesn’t this become an issue at anything closer or farther than what the sights are set for? Your 64.5cm deviation calculation makes sense.
@The762x39mm3 жыл бұрын
I ordered a blued LMG,missed the first shipment but now i bought one. Cant wait to receive it!
@ChefNutter3 жыл бұрын
I thought these were no longer being made or avialable in Canada?
@commiecrusher2 жыл бұрын
@@ChefNutter new shipment available today
@alcodie15582 жыл бұрын
My Type 81 LMG is blued and came with two 30/5 mags and a free drum mag that only holds 5 rounds , but it looks cool . I was impressed with the grouping I got compared to my SKS which in itself is a good one but this T81 LMG is head and shoulders above it . Even shooing off hand is better . I believe its due to the heavy barrel . I enjoyed watching your vid . Thumbs up : )
@gnutzguy2 жыл бұрын
That's a good deal. The phosphate never went on sale.
@alcodie15582 жыл бұрын
@@gnutzguy I wonder if its because the phosphate process cost a whole lot more then blueing ?
@gnutzguy2 жыл бұрын
actually, bluing cost more and bcos its shinier it will show all the flaws therefore there are more rejections.
@alcodie15582 жыл бұрын
@@gnutzguy So that's why gun companies went to phosphate $$ I always thought they did it because phosphate was a better finish , more durable in the elements . More durable and cheaper to produce .
@gnutzguy2 жыл бұрын
its true, phosphate is more durable, cheaper to make and hides more production flaws but blued looks much nice and shinier. its what we are accustomed to, SKS hasta be blued and FN C1 hasta be phosphate. T81 is relatively new so it can be both.
@andrewgiblin34684 жыл бұрын
Got mine four days ago and love it!!
@Pemo983393 жыл бұрын
you probably know this alrady by nw but the tool that you didnt know what it does is for unscrewing the rear sight side screw... thanks for the informative videos theyre a big big help
@gnutzguy3 жыл бұрын
Thanks for the info
@refusesack48974 жыл бұрын
Every silicon bead type moisture absorber I have ever seen has "THROW AWAY" written on the packet. Great for keeping parts dry, I don't know about a whole room though
@TheRealBatCave3 жыл бұрын
Lol hanging around as Halloween decorations lmao
@everett99004 жыл бұрын
The top bar on the Rifle sight was for Aiming rifle grenades according to the interwebs. The Second notch on the LMG sight I'd bet you are correct is for the 600-700m setting.
@gnutzguy4 жыл бұрын
that interweb has not fired a rifle grenade. the angle is so severe that a rear sight would be useless,
@AnotherReincarnation_No844 жыл бұрын
Awesome details, thank you!
@gnutzguy4 жыл бұрын
Glad you liked it!
@MrInderrawal Жыл бұрын
Thanks for explaining rear site so well, but how would you set at 200, my setting is 6,1 how would we read that and when i turn the dial it goes to 7,3 and then to 0,4
@productguru83237 ай бұрын
Did you order these from Amazon or alibaba?
@gnutzguy7 ай бұрын
yup and on buy two get one free special, lol.
@Kaffarov97 Жыл бұрын
Do you have to drill out that other rivet on the carry handle to remove it? Seems weird to have one be a removable screw and another be a rivet holding it in.
@gnutzguy Жыл бұрын
yes, you have to grind out the rivet IF you dont want to disassemble the rear sight. i dont recommend disassembling
@davegravel8823 жыл бұрын
Sorry to bug you again but can you tell me if we can use AK-47 stock on the type 81 LMG???
@matthewhenkel2016 Жыл бұрын
Thank you for covering the iron sights for the LMG version, I had my suspicions, and came to the same conclusion as you. Every KZbin video over-looks this part in the review. Same as you, I would love to hear some opinions on this, can anyone confirm his conclusion with the iron sights?
@gnutzguy Жыл бұрын
Thanks for watching!
@byronwang86703 жыл бұрын
The two pins in the black tube is for the bipod. Same length and size.
@gnutzguy3 жыл бұрын
someone already said that but im wondering if the soldiers removed the bipod often to lose the pins?
@davegravel8823 жыл бұрын
So if I understand right what you say a rpk stock that doesn't have it's hole drill it would fit on the type 81 LMG then??
@gnutzguy3 жыл бұрын
More fitting is NEEDED.
@davegravel8823 жыл бұрын
Ok thanks for the info
@ryanthesaiyan41053 жыл бұрын
Can't put the 81 foregrip on the lmg but can you put the lmg foregrip on the 81? I'm trying to find the original foregrip basically
@gnutzguy3 жыл бұрын
the handguards for the rifle and the LMG are not interchangeable. mine is not for sale.
@cameronjaeger3 жыл бұрын
Have you tried removing the carry handle? It looks like it would require drilling that rivet
@gnutzguy3 жыл бұрын
I agree.
@snauserdog64443 жыл бұрын
Did you end up doing so?
@cameronjaeger3 жыл бұрын
Nope- but I have confirmed drilling required/ removing rivet.
@snauserdog64443 жыл бұрын
@@cameronjaeger once I receive mine, I think I'll be removing it. Can leave my experience if interested
@cameronjaeger3 жыл бұрын
There's a a few people on the Facebook group if you want to see what it looks like. You can also drive out the carry handle rivet with a punch which is apparently reversible
@Gist258 Жыл бұрын
any stock adapter for LMG? IT is selling it @ 1199 before tax, really want to have it.
@gnutzguy Жыл бұрын
see this vid, kzbin.info/www/bejne/hnTJaZywrputack
@Bobbyleejoe2556 Жыл бұрын
As a retired North Vietnam Army Platoon gunnery, the Type 81/ RPK is an excellent and very effective weapon. I’ve taken down many US helicopters and their door gunners during the war. 😒
@gnutzguy Жыл бұрын
you mean the RPK? bcos the T81 were made after the vietnam war.
@Seizurecow3 жыл бұрын
Do you think the Rifles with a folding stock will be coming in anytime soon?
@Seizurecow3 жыл бұрын
@@gnutzguy hopefully, everyone is selling them for like 2x retail prices
@gnutzguy3 жыл бұрын
i call it a trudooo tax, i blame him. he made tens of thousands vz58 into a safe queen and tons of ammo itching for a sub and T81 is the beneficiary. thats why i believe there are enough demand by Canadians even with a price hike to place an order without piggybacking to another production.
@Mauserc963 жыл бұрын
Hi gnutzguy, really love your videos, I've ordered a type 81 LMG myself I'm just curious what modification might be possible with the lmg? Is there a rail or folding stock that would fit? I love the magpul zhukov stock and handguard look but with the barrel thickness is it even possible to mount them? I admire your handieness and knowledge and would love to hear if you have any tips for moding a LMG?
@gnutzguy3 жыл бұрын
i will pimp me shoot the LMG soon. changing the stock, hg. installing scope mount and flash hider (most difficult).
@Mauserc963 жыл бұрын
@@gnutzguy very curious about the scope mount idea, cant wait to see how you finish it up. Eagerly awaiting that video and will probably attempt similar project
@shilianglu5723 жыл бұрын
Would you be able to make a video of how to remove the bipod? I have try to punch the pin out. but no luck at all.
@gnutzguy3 жыл бұрын
Coming up. Stay tuned
@shilianglu5723 жыл бұрын
@@gnutzguy thank you! Just for your information. I noticed that on one side of the bipod cover, it does not look like there is a pin. I can see through the hole. I am not sure if it is designed like that or the pin is missed on mine. However, I could not open it from this side. I tried everything and felt that I am going to break it if I continue. The other side of the cover has pin, but I can not punch it out... I bended a puncher and still not luck.....
@williamknox99554 жыл бұрын
great video man, have you shopped or on gunspot or heard about them, they have some great deals going on i feel there better then gun broker
@gnutzguy4 жыл бұрын
I will check them out but I'm on GB.
@naturallyj13 жыл бұрын
when using the 6-7 you use the top cut in the rear sight.
@naturallyj13 жыл бұрын
Ah. I see you figured it out. Cheers
@MrDanielt7 Жыл бұрын
Mine had the loose ejector rivet, wasnt a trunnion one. It was a 2017 folder which is the worst ones that were imported complete pos. After 300rds my other blonde folder looked beat to death inside peening everywhere and was only run on #1 setting. And I had to fix the bho by grinding it to make it come up further because my bolt would trip closed lol. My se fixed is like new inside simmilar round count 100x better built 🙂
@gnutzguy Жыл бұрын
thanks for chiming in but this is about the LMG, lol. LMG are much better than the rifles
@jeromemorgan49284 жыл бұрын
Is it ok to leave the link for the site you purchased the same item?.
@gnutzguy4 жыл бұрын
no link please. you can check a canadian forum for that info.
@coastghost16493 жыл бұрын
Check out tactical imports
@sunnesonne3 жыл бұрын
Got a new batch 20 min ago, got the phosphate version
@TheRealBatCave3 жыл бұрын
Lol dont hang the moisture pqcks some kid might eat em and get sick af
@sunnesonne3 жыл бұрын
@@TheRealBatCave I’m gonna eat all of them
@TheRealBatCave3 жыл бұрын
@@sunnesonne lol theres always some1, i jist thought it was a funny recycling idea i dunno
@The007astig Жыл бұрын
How long is the barrel of LMG's
@gnutzguy Жыл бұрын
IIRC 20.5"
@jeromemorgan49284 жыл бұрын
I would like to get my hands on the LMG type 81. Please is it possible you can giv
@51491114 жыл бұрын
it is possible to buy close to the end of the year
@1991tommygun4 жыл бұрын
A Canadian company should get a foot in the door on producing these, could be a good idea according to sales
@gnutzguy4 жыл бұрын
No Canadian companies can build this for $1500 and risky with trudoo in power
@1991tommygun4 жыл бұрын
Gnutzguy they can build a milled aluminum wk180c for $1100 so why cant they make a stamped gun for around the same as china? Dont get me started on trudeau
@gnutzguy4 жыл бұрын
Lol. Apples to apples. milled aluminum = CNC . Any country can build with CNC of small orders, labor cost is minimal, warehouse space minimal but Stamp steel = huge tooling cost, needs lots of machinery, needs lots of labor, needs lots of warehouse space. Cheaper and faster to produce large orders, cant do small orders.
@gnutzguy4 жыл бұрын
Btw, CNC can produce a different receiver at a touch of a button, not so with stamp, changing molds and cutters will take days.
@gnutzguy4 жыл бұрын
yes, i had to email them for the two spindles but on the next shipment no spindle is included. you can order one for $25.
@matte65884 жыл бұрын
Roll pins are for the bipod barrel clamp best I can tell
@gnutzguy4 жыл бұрын
interesting. i wonder if soldiers removed the bipod often to lose the pins?
@firemanneil4 жыл бұрын
Gunutz please reach out to me Parts and service from TI I noticed somthing with your t81 rifle . Great video .
@BaconSlayer69 Жыл бұрын
The rear drum on my Type81 LMG fell off when I shot it a lot and now I lost it 😅
@gnutzguy Жыл бұрын
rear drum?
@BaconSlayer69 Жыл бұрын
@@gnutzguy rear sight ajustement wheel
@BaconSlayer69 Жыл бұрын
@@gnutzguy the wheel that says 6 and 7
@elinam44524 жыл бұрын
Is the rpk prohibited status ?
@gnutzguy4 жыл бұрын
Yes, that's why it's neuter.
@AustinsMain3 жыл бұрын
How do you have an RPK in Canada?
@gnutzguy3 жыл бұрын
prohib just like my m4, vz58 and evo3. sad, sniff sniff.
@AustinsMain3 жыл бұрын
@@gnutzguy why is it deactivated?
@gnutzguy3 жыл бұрын
in the case of the rpk, its easier to sell cos buyers dont need an appropriate class lic which is a very tiny market... matter of fact you dont even need a lic. i might have to do the same with my m4, vz58 and evo3 cos its better than handing them over for destruction.
@AustinsMain3 жыл бұрын
@@gnutzguy I know that. My question is more, why deactivate your firearms? Especially if you don't plan to sell them. Or did you buy them already deactivated?
@gnutzguy3 жыл бұрын
lol... a rather round about way of asking a simply question and the answer is it was deact already. you dont understand, in the case of my m4, i dont have a choice either deact them or hand them over, choice one legally. there are no such thing as "dont plan to sell" bcos upon my death, it cant be inherited so i might as well sell it or deact it.
@kentony76724 жыл бұрын
I think no prohib license after 95.
@throwplate4 жыл бұрын
Now I feel bad anyone who's been paying $1,800+ for regular Type 81s on the used market, they could have got one of these new instead Also just toss any moisture sorbent packs in a gun safe or tool box, probably doesn't do any good but won't do any harm either. The stuff can be used as cat litter too!
@gnutzguy4 жыл бұрын
$1800 for the parked model is worth it cos no more of these are coming in.
@bruceleehee9267 Жыл бұрын
Why would u weld it . Just hide it
@gnutzguy Жыл бұрын
Please don't ask anybody to break the law online. You never know who's watching.
@britishbulldog89663 жыл бұрын
VZ-58 muzzle devices work on the LMG.
@gnutzguy3 жыл бұрын
i assumed you are asking me a question and the answer is no, vz58 is m14 and the lmg is m16. the sizes is not close
@britishbulldog89663 жыл бұрын
@@gnutzguy Hi, I was actually making a statement, thus the reason for the absence of a question mark. I am using my newly banned VZ58’s muzzle device on my Type 81 LMG. It even docks with the spring detent as it does on the VZ.
@gnutzguy3 жыл бұрын
@@britishbulldog8966 well, yours got to be the only one.
@shtf30884 жыл бұрын
Hey, neither of mine came with the sling!
@gnutzguy4 жыл бұрын
Ooops
@Impulset03 жыл бұрын
I think you had to select it* as an option when purchasing.
@Al-Muhtadi Жыл бұрын
Nice video
@gnutzguy Жыл бұрын
thanks.
@hgarza11363 жыл бұрын
The 81 looks some what like a really modified SKS. I like it!
@gnutzguy3 жыл бұрын
funny, most people would say the type 63 looks more like the sks and the type 81 looks more like the AK.
@hgarza11363 жыл бұрын
@@gnutzguy well yes it does look like AK, but with the charging handle,& how far up the magwell is makes it look like a SKS that someone tried to make look like AK. Dont remember what stock it is, but there is a after market stock that some what makes the SKS resemble the AK.
@BakvSFE2 жыл бұрын
T56 looks like sks, and t81 looks like ak47
@odanewilson Жыл бұрын
I need 200 of those to buy
@BaconSlayer69 Жыл бұрын
Get an SKS or AK they’re better made
@walidqaissi9292Ай бұрын
From type 81 operation system it is consider a heavy barrel automatic rifle its not LMG
@gnutzguyАй бұрын
if it looks a lmg and the importer called them lmg then its a lmg, lol
@vincentgilson20543 жыл бұрын
Is There New shipment of type 81 folding comming in ??
@gnutzguy3 жыл бұрын
yup, end of this year. new price is $1200.
@HuxleyTheProf3 жыл бұрын
@@gnutzguy Really? Link?
@gnutzguy3 жыл бұрын
@@HuxleyTheProf sorry, no link. they said there is a possibility of a shipment at the end of this year but nothing is firm. also the new price is $1200.
@wedge3083 жыл бұрын
@@HuxleyTheProf came out the other day and sold out now.
@hgarza11364 жыл бұрын
Excuse my ignorance, but last I heard Canada was taking away most firearms. Has something changed? Did Canadians fight back? I hope so !
@gnutzguy4 жыл бұрын
Not physically taken away yet, we are still fighting it but we can NOT take it out of the house.
@gnutzguy4 жыл бұрын
correction, can not take it out of the house and can not sell it .
@tg0003bpa4 жыл бұрын
To clarify this firearm is still non restricted
@gnutzguy4 жыл бұрын
@@tg0003bpa yes, currently non-restricted
@FeydHarkon6664 жыл бұрын
@@gnutzguy Can you use the RPK at a gun club with an invitation and ATT? Also do you need a restricted license for grandfathering ?
@Skywalker1454 жыл бұрын
how many of you think this awesome looking gun will be banned on gun ban phase two?
@gnutzguy4 жыл бұрын
Most likely but we can't live in fear.
@Skywalker1454 жыл бұрын
@@gnutzguy I like your optimism. Enjoy the LMG. It's a lot of fun.
@1991tommygun4 жыл бұрын
Its a non registered gun.......
@gnutzguy4 жыл бұрын
@@1991tommygun so was my CSA VZ58 and my evo3, i cant take them out of the house, cant take them to the range.
@1991tommygun4 жыл бұрын
Gnutzguy if a tree falls in the woods and noone hears it did it even happen?
@danieljones1981 Жыл бұрын
Are you in Canada?
@gnutzguy Жыл бұрын
yup
@wferguson84854 жыл бұрын
Old enough to have a Chicom 'RPK'? Didn't think so.
@gnutzguy4 жыл бұрын
You wanna bet? I didn't think so... Lol
@wferguson84854 жыл бұрын
@@gnutzguy Then you are crusty. You sound young whipper snapper.
@gnutzguy4 жыл бұрын
@@wferguson8485 crusty? I have you know i bath regularly, lol. I retired 15 years ago, lol.
@electronbeing547311 ай бұрын
@@wferguson8485eat a pile
@candisully82092 жыл бұрын
shame not in the U,S
@gnutzguy2 жыл бұрын
I agree.
@madworldsnight5528 Жыл бұрын
@goyimpower1342 You can get real type 81s in Canada
@madworldsnight5528 Жыл бұрын
@goyimpower1342 Lol they can't even get real ak's in the states
@madworldsnight5528 Жыл бұрын
@goyimpower1342 Oh when was the last import from Russia?
@madworldsnight5528 Жыл бұрын
@goyimpower1342 At least I'm retard that can read. Unlike you lmfao
@jamilrehman86633 жыл бұрын
Effective range
@gnutzguy3 жыл бұрын
T81 lmg is 400m
@sherlock93974 жыл бұрын
What’s happening with your gun laws at the moment has Canada ended up like the UK and said right everything is banned no fun anymore you can’t have Sami auto rifles and hand guns or is it not that bad “yet”.
@gnutzguy4 жыл бұрын
yet ... Trudeau our prime minister zeroed in the "assault rifles" and selectively banned several semis including AR and VZ, simply bcos they were involved in mass shootings.
@luisvcool13 жыл бұрын
@@gnutzguyDidn't the perpetrator of the shooting Trudeau mainly referenced in the ban obtain their firearms illegally? It is important to clarify that point as law-abiding Canadians are losing their ownership of firearms due to criminals who will continue to source arms illegally.
@John-lc2lz3 жыл бұрын
An AR15 has never been used in a mass shooting in Canada... neither has an evo skorpion, Robinson xcr, mini 30, m1a.
@gnutzguy3 жыл бұрын
@@John-lc2lz unfortunately, the idiot in N.S. did use a colt AR and mini-14 which is a mini-30 in 5.56. the rest fell under the banner of assault rifles.
@gnutzguy3 жыл бұрын
@@luisvcool1 you just did. thanks. That details we didn't know when the PM banned our guns.
@MauiDAchath753 жыл бұрын
Prohibited??
@Mr.Rakija3 жыл бұрын
nope. get one now
@MauiDAchath753 жыл бұрын
Right on!!
@tyschultz39593 жыл бұрын
Here in the us the type 81 semi auto is selling in auction for 14000 nothing special about it but in canada its only 1500
@gnutzguy3 жыл бұрын
yup, its really rare in the US a collectors item, you guys call it model 313. in 2019 one sold for $32,500 at RIA. www.rockislandauction.com/detail/77/1817/very-rare-norinco-model-313-semiautomatic-rifle
@gnutzguy3 жыл бұрын
BTW, there is a 15% auction fee on top of the $32,500. wow!!! IIRC, the dude that sold it bought it for $8000 several years before, damn good investment i say.
@tyschultz39593 жыл бұрын
@@gnutzguy do you have gunbroker in Canada?
@gnutzguy3 жыл бұрын
we do but i dont use it. i use a popular gun forum.
@dexm20103 жыл бұрын
@@gnutzguy It's really ironic I think--you guys probably pound-for-pound have up there a lot more..."exotic" stuff than we have down here in the States, it's just that you guys are limited by lower capacity mags with most of it. Man, if only U.S. and Canadian gun shops could import/export firearms between our two countries without so much nonsense, BS and red tape!!!!
@wildandliving2 жыл бұрын
Dlask arms. Can thread what you want
@gnutzguy2 жыл бұрын
no they wont, i asked.
@BaconSlayer69 Жыл бұрын
The 6 and 7 on the t81 LMG are there to mess with ur head
@gnutzguy Жыл бұрын
not on the full auto but for us .... yes
@BaconSlayer69 Жыл бұрын
@@gnutzguy nobody shoots full auto 7.62x39 at distances like 600 to 700 meters its ridiculously ineffective the ballistics for the 7.62x39 won’t match lol it’s more 100 to 400 meter cartridge
@BaconSlayer69 Жыл бұрын
@@gnutzguy 500 is stretching it
@gnutzguy Жыл бұрын
@@BaconSlayer69 there are a few KZbin of 600 y with shorter barrel ak47 so a longer barrel of lmg can reach that distance. Basically, it's just spray and pray, lol.
@kpsgoing10 ай бұрын
@@BaconSlayer69yes it looses it accuracy at 500 and goes transsonic how ever it is a 30 caliber bullet traveling at the same speed S a 45 acp at 550 yards and carries that energy clear till 700 yards or so but it's still lethal but not accurate so with full auto fire it's literally racing 30 cal lol
@odanewilson Жыл бұрын
I need 2000000 of those to buy ok
@gnutzguy Жыл бұрын
lol... i think only 2-3 thousands of the lmg in the country
@davegravel8823 жыл бұрын
Hey anyone know the tickness of the type 81 LMG I want to buy and turn it into a "Tabuk Sniper Rifle"
@gnutzguy3 жыл бұрын
Thickness of what ? Receiver? Barrel is in the. Vid
@davegravel8823 жыл бұрын
Thickness of the reciver the LMG should be thicker if ak to rpk is an exemple
@gnutzguy3 жыл бұрын
@@davegravel882 thickness of the receiver sheet steel is already mentioned in the vid
@davegravel8823 жыл бұрын
Ok rewatch your LMG vid same tickness for rifle and lmg hmm?? Maybe I should buy something else any recommandation for a 7.62x39 semi-auto NR???
@davegravel8823 жыл бұрын
Will the Magpul or promag handguard work with the type 81 LMG???
@monsta30383 жыл бұрын
Ok one of you guys wannatrade an sks paratrooper for a type 81....smuggle it in by boat on great lakes meet you in middle!😆😆
@gnutzguy3 жыл бұрын
para would be cool especially with thumbhole stock.
@andrewnolasco83673 жыл бұрын
Serbian Army?
@ark77543 жыл бұрын
Chinese
@everett99004 жыл бұрын
Its "Blued Finish" not "Blue" ...
@gnutzguy4 жыл бұрын
as in the movie lord of war, "but i prefer it my way" , lol.
@pistooli13 жыл бұрын
I had mine for a week , I sold it when i discovered it was not half as good as an SKS... Don't waste your money.
@gnutzguy3 жыл бұрын
I do not agree.
@blazkowicz94553 жыл бұрын
Something tells me you didn’t actually buy one or sold it for a different reason because your statement is just wrong.