in this video I show you my process of getting scooters that sat for a long time to run again.
Пікірлер: 94
@keithharrison7688 Жыл бұрын
Bro, I love the way you broke it down and systematically went through it. Right to the point. Good job👍
@scooterrehab6295 Жыл бұрын
Hey thanks for watching ‼️ I hope it helped and I'm pleased you liked it.
@mikeanderson113910 ай бұрын
very cool and methodical. Great delivery.
@scooterrehab629510 ай бұрын
Thank you ‼️ And thank you for watching ‼️
@jccwright7 ай бұрын
If Berrymans isn't sponsoring this channel you need to find a new company for your carb cleaner cause you definitely have been doing them some great advertising.
@scooterrehab62957 ай бұрын
Right ‼️😂 they could at least give me a years supply.😅 Hey thank you for watching I greatly appreciate it ‼️
@diegogween-bd7ugАй бұрын
Buddy thank you so much for sharing your video. Thank you for being so deeply detailed also. I have a 150 mad dog I plan on working on. I liked & subscribed to your channel. From Arizona, Blessings!...
@scooterrehab6295Ай бұрын
I pleased the video helped you Thank you for subscribing commenting and watching ‼️
@fthrgasp Жыл бұрын
Congrats on bringing her back from the dead! Good tips I'm probably gonna need soon.
@scooterrehab6295 Жыл бұрын
Hey thanks for watching I hope this video is useful for you. Good luck with your projects . You also can join the Scooter Rehab Facebook group to post your projects.
@grazz786511 ай бұрын
You’re spot on with the carburetors. The pilot jet is about the size of a human hair and does clog easy. I put a capful of seafoam in the tank to keep everything clean.
@scooterrehab629511 ай бұрын
Ethanol is a small engine killer best bet if you plan on not riding for a while is to drain the carburetor bowl . And or fuel tank if is going to be a really long time. Hey thanks for watching and commenting I really appreciate it ‼️
@grazz786511 ай бұрын
@@scooterrehab6295 I try to run my fuel down September/October and drain what ever is left in the tank once I store it for the winter. These carburetors clog easy and cold start up becomes a nightmare
@jimmorris5090 Жыл бұрын
I owned a scooter shop, and most of the problems we saw were ethanol-caused carburetter problems after the scooter had sat for a while. The battery on that scooter appears not up to snuff. When it finally started, you had changed chargers, and the starter motor ran much faster. Also, with the air filter disconnected, it will run leaner.
@scooterrehab6295 Жыл бұрын
You're correct ethanol and and neglect of maintenance is the biggest killer for scooter's.
@scooterrehab6295 Жыл бұрын
Hey and thank you for watching ‼️
@beachbaby23819 ай бұрын
Appreciate it I was lost first time owning one of these 💪💪💪💪
@scooterrehab62959 ай бұрын
You're welcome thank you for watching ‼️
@beachbaby23819 ай бұрын
It said I won a bike how do I get it?
@nicoe705710 ай бұрын
R on the plug is for resistor. I have always used the C7HSA plug
@scooterrehab629510 ай бұрын
Yep it does hey thanks for watching ‼️ I appreciate it ‼️
@just4kicks950 Жыл бұрын
Hey bro, I'm not sure but I believe the model has hazzard flashers. IDK I've been flipping & I have seen some crazy things people have done on their scoots. I live in Ohio & my only option is ethanol 😔 lol. Do you have a preference on fuel stability products?? IDK I drain everything because my riding season doesn't last long here. Nice work on the little VIP 💯🎬🛵👍.Salute my friend 😎
@scooterrehab6295 Жыл бұрын
Hey thanks for watching ‼️ I forgot what was the issue with those signals. I think it was the flasher🤷🏾♂️ . But as of the last few weeks I've been forced to buy ethanol fuel the only fuel station that sold ethanol free stopped selling it.. I appreciate you commenting thank you ‼️
@plaxicon3 ай бұрын
good info, thanks !
@scooterrehab62953 ай бұрын
You're welcome thank you for commenting and watching ‼️
@teshuvahemmet30367 ай бұрын
Thanks for the information 👍🙏
@scooterrehab62957 ай бұрын
You're most certainly welcome thank you for watching ‼️
@teshuvahemmet30367 ай бұрын
@@scooterrehab6295 I have a 250cc with 58 miles on it and it has been sitting for 15years do you think it will run please let me know what you think
@beavejolly7009 Жыл бұрын
I did hear you say you tried starting fluid in the beginning but I only saw you using carb cleaner. My experience has always been spraying carb cleaner into an engine not running creates a hard start requiring longer cranking until the carb cleaner is cleared. If you spray carb cleaner in to an engine while it's running it will kill the engine and you will see what I mean. I think if you used starting fluid it would have started right up.
@scooterrehab6295 Жыл бұрын
Yes I said starting fluid then I corrected myself I have never experienced a scooter having a hard start problem because of using carburetor cleaner yes if you spray carbureted cleaner into a running engine it will kill it but it has been my experience you can use carburetor cleaner to start an engine and brake clean thank you for your comment
@tfmobilewash840Ай бұрын
Nice video bro 👌🏻
@scooterrehab6295Ай бұрын
Thank you for commenting and watching ‼️
@reginaldb.campbelljr.7451 Жыл бұрын
I had a V.I.P it got stolen on thanksgiving of 2019 from my job! Thang rode good!
@scooterrehab6295 Жыл бұрын
Dang Reginald that's messed up hope you got a ride if you did get a kryptonite U - lock or chain their pricey but worth having. Thanks for watching ‼️
@chuckymanb Жыл бұрын
On the no fire not all ways the full stator sometimes it's just the pick up lil black box above the magneto
@scooterrehab6295 Жыл бұрын
You're correct but as cheap they are it's easier to replace the whole thing. THANKS for watching ‼️
@Alex_Miller1980 Жыл бұрын
Try to adjust the lash on the valve rocker it takes a 9mm hex socket, the valve seat gets worned and thus makes a loss on compression remember to TDC before adjustment and rotate a couple of times, if the valves aren't shot, this is a common failure on GY6 engines
@scooterrehab6295 Жыл бұрын
You're right very common GY6 issue . Thanks for watching ‼️
@chrislavalley4062 Жыл бұрын
It was the valves?
@chrislavalley4062 Жыл бұрын
I allways go straight for the valves
@scooterrehab6295 Жыл бұрын
@@chrislavalley4062 the valve lash wasn't the reason it wasn't running it was bad gas. The valve lash on these GY6 engines can get way out of adjustment before it pre vent it from running. This scooter had a common case of sat for to long with ethanol based gasoline in it .
@jimmyalgiere1291 Жыл бұрын
Is the fuse wire on Batt?? Where does that wire run to? working on my 250cc roketa scooter and lost the ignition? Turn the key on and will not show signs of life.I can't find the wire that has a fuse going to the Batterie.
@scooterrehab6295 Жыл бұрын
The wire with the fuse is the smaller wire connected to the + side of the battery. If your battery is down on the floorboard it most likely under the floor board somewhere.
@douglasknight7400 Жыл бұрын
R is for resistor.
@younoit10818 ай бұрын
hey there, nice video en tips. i have an question, i have an gy6 with an 70cc. when i start is runs great but after it warms up it starting to making a ticking sound, like only when its getting warm. i have checkt the cilinder en piston for wear en its like brand new en noting hitting, stil put other chain gards in en new timing chain, new valve arms en the holder, en new camshaft, en new variator+rollers. it runs great non the less, valves are set to 0.08mm intake en 0.10mm exhaust. im kinde lost where i need to look for, but it does it only when warmed up after 5/10min en its riding great non the less thats the weard part, very rev happy en rev respons like its brand new, en i also check the head en puled out the valves en put new gaskets in en cleaned the exaust valve, en when i did all those things i checkt for the t line is on top dead center en that is good, checkt the barings is all good en its still the same, so where can this ticking sound be comming from? it not easy to find why its ticking only when the engine is warmed up. maby you have any advise what can do this? it has the 50cc head with the long valves en its not hitting the piston so should be good there. i hope you see my response en have some advice for me that i could check out. greatings from the netherlands 😄
@scooterrehab62958 ай бұрын
Thanks for watching and commenting ‼️ You could have a bad rocker arm that flexes a little when it heats up. Or it's the oil you are using getting warm and thinning out . Again thank you for watching ‼️
@younoit10818 ай бұрын
@@scooterrehab6295 thanks for the advice, i have new rocker arm installed en had the same ticking sound, i have now 15w40 in it, maby i try 20w50 on the next oil change. could it also be becous of a weaker spark? or to much compresion? of maby the carb is to lean? can those tings also tick as the engine heats up? or maby just got bad luck en i got an noisy rocker arm brand new?
@djeksana43606 ай бұрын
@@younoit1081 check the valves make a adjustment and if you still hear clicking sound think about oil pressure like the oil pump going bad and not bringing enough oil to the valves
@djeksana43606 ай бұрын
when the engine heats up valve clearence gets tighter try making them 0.10 mm for the intake and 0.12 exhaust@@younoit1081
@MrBerenguer678 ай бұрын
Hi Thks four your video I have a Peugeot V-Clic 50cc 4T my when I start the idle is up after around 15 seconds is caming to normal idle four few seconds is start going up and down all the times is any help please thank you very much apreciate
@scooterrehab62958 ай бұрын
Hey thank you for watching ‼️ is your scooter fuel injected ❓
@frednetherlands887 Жыл бұрын
Thanks
@scooterrehab6295 Жыл бұрын
You are most certainly welcome and thank you for watching ‼️
@JenniferThornton-bb9vf10 ай бұрын
Help! I changed out the carberator after haven the pilot jet break and not come out no matter whay i tried, cut to the chase. It turns on like power, but has no turn over whay so ever. The fuel filter is empty so how can i get fuel to start flowing again?
@scooterrehab629510 ай бұрын
Hey thanks for watching take vacuum line off of the intake manifold and put it in your mouth suck and blow on that line until you see fuel fill the filter. I know that sounded like dirty talk 🤣 but that's how it's done.😅
@nastynatesscooters989622 күн бұрын
What’s that green wire you got grounded to the cylinder head, what’s it going too?
@scooterrehab629522 күн бұрын
That's the ground wire it's either going to the battery or to the frame. I like to use at least two ground wires the one from the head I usually run to the battery then I run another one from the starter body to the frame you can never have too many grounds thank you for commenting and watching ‼️
@nastynatesscooters989622 күн бұрын
I was just wondering cuz I got a Eton 4 stroke ( I usually don’t mess with 4 stroke I like 2 strokes) but it only sparks when I hit the start button and when I release the botton but not in between when the electric starter is turning over, has me like 🤔
@nastynatesscooters989622 күн бұрын
Eton 4 stroke scooter
@drixyfx3120 Жыл бұрын
I’m actually having a problem with my moped where it has spark, fuel and ran for a sec then died and I tried kick starting it it work but then died in a sec the second time idk what to do I’m not good with mopeds at all, if you could give me an advice please I really need it
@scooterrehab6295 Жыл бұрын
Sounds like a clogged jet in the carburetor and or a vacuum leak. Thank the carburetor off and unscrew the jets if you can't see threw them they are clogged
@drixyfx3120 Жыл бұрын
@@scooterrehab6295 thank you and I will
@guarddog73 Жыл бұрын
Hey guys I have a 49cc tao tao vip future champion handsome that starts fine. My problem is when I think I have it where it idles great when warm it does a 180 and either idles to low and cuts out or it idles way to fast and won't idle down. When I bought it it didn't run at all. I bought a stator the only thing it needed besides a muffler. I purchased a new muffler put it on now it either idles to low or to fast after I think I finally got it right. PLEASE HELP!!!! I
@scooterrehab6295 Жыл бұрын
Kevin thanks for watching sounds like the electric choke is not functioning properly . Those carburetors are so cheap on Amazon id just order a new one.
@guarddog73 Жыл бұрын
@Scooter Rehab well I found the problem, I pray anyways. The spacer between the carb and engine is cracked in multiple places. This makes twice I've replaced it. So if anyone else is having idle issues this could be one reason why.
@robertbell18044 ай бұрын
Mine is doing exactly the same thing.I don't know what it is could be my spark plug it's really old
@scooterrehab62954 ай бұрын
Check for spark check compression and make sure the carburetor is clean and it's getting fuel thank you for commenting and watching ‼️
@corystevens184 Жыл бұрын
👍
@scooterrehab6295 Жыл бұрын
Thanks for watching ‼️
@jennifer82278 ай бұрын
Put a new carburetor in. I had to do that and now it cranks right Up.😃
@scooterrehab62958 ай бұрын
The carburetors are way easy to clean and the rebuild kits are half the price of a new carb. Gotta save them pennies ‼️😂🤣 hey thanks for watching and commenting ‼️
@jeffmee763 Жыл бұрын
I run on 97 octane with 5 % ethanol in the UK.
@scooterrehab6295 Жыл бұрын
Thank you for your comment the fuel here in the us I horrible there's no ethanol free gas in my area anymore. Thank you for watching ‼️
@geoffsimpson4072 Жыл бұрын
My gy6 125 starts on button but cuts out when button is released
@scooterrehab6295 Жыл бұрын
Now that's a brain 🧠 teaser of an issue if I ever heard one. 🤔 Hey join the SCOOTER REHAB Facebook group and post a video of what you are dealing with. Someone in the group probably has that issue before. Thank you for watching ‼️
@o_b_wanАй бұрын
My scooter sounds lije its drawning and stalls when i turn throttle 😢
@o_b_wanАй бұрын
It idles fine
@scooterrehab6295Ай бұрын
Sounds like your main jet is clogged . Thank you for commenting and watching ‼️
@nocvision775922 күн бұрын
Just replace my battery and none of my lights comes on
@scooterrehab629522 күн бұрын
Check the fuse next to the battery
@williamkirkpatrick88209 ай бұрын
I cannt find anything on the timming
@scooterrehab62959 ай бұрын
What do you need to know about timing ❓
@williamkirkpatrick88209 ай бұрын
How can i tell if its in time
@someguy47085 ай бұрын
when its starts screaming like that i usually give gas and it starts, 15;15
@scooterrehab62955 ай бұрын
Yeah that works sometimes thank you for commenting and watching ‼️
@gerardorodriguez6418 Жыл бұрын
You need valve adjusment
@scooterrehab6295 Жыл бұрын
A valve adjustment was done before it was sold.
@darkodonnie246010 ай бұрын
spark plug ngk CR 7 hmm ..R? think is for Racing..😂
@scooterrehab629510 ай бұрын
😂🤣
@MrBerenguer678 ай бұрын
No Thks to reply
@scooterrehab62958 ай бұрын
What happened?
@user-yf7rt2pz2u9 ай бұрын
I have this bike , I built the shit out of mine and custom painted everyone she fuckin scoots
@scooterrehab62959 ай бұрын
I've built so many of these you can definitely make them really cool and fast. Hey thanks for watching ‼️ I really appreciate it ‼️