Why Would They Do That?!?! HVAC Repairs…

-- Work Van Equipment --
www.workvanequ...
-- Truewerk Workwear --
www.truewerk.c... (Use promo code "ZAC15" to save 15%)
- SUPPORT THE CHANNEL -
www.patreon.co...
- Check out @TruTech Tools, LTD -
www.trutechtoo... (Use promo code “QUALITYHVAC” to save 8%)
- HVAC TACTICAL -
hvactactical.com/ (Use Promo Code "QUALITYHVAC" to save 10%)
- FOLLOW ME -
Instagram: @qualityhvacr
- BUSINESS INQUIRES -
[e-mail]
- TOOLS I USE -
RLS Refrigerant Press Tool Kit:
www.trutechtoo...
Fieldpiece SC480 Meter: www.trutechtoo...
Fieldpiece SC680 Meter: www.trutechtoo...
Fieldpiece Job Link HVACR Charge & Air Kit: www.trutechtoo...
Fieldpiece SM380V Digital Manifold: www.trutechtoo...
Veto ProPac Tech MCT Tool Bag: www.trutechtoo...
Supco Magnetic Umbrella: www.trutechtoo...
Solderweld HVAC Brazing Pack: www.trutechtoo...
Solderweld Hot Block Putty: www.trutechtoo...
Navac 2cfm Battery Operated Vacuum Pump: www.trutechtoo...
Cordless-Vacuum-Pump-2CFM?affid=38
Accutools BluVac Micron Gauge: www.trutechtoo...
Accutools TruBlu Evacuation Kit: www.trutechtoo...
Veto ProPac LC Tool Bag: www.trutechtoo...
Veto ProPac MC Tool Bag: www.trutechtoo...
Fieldpiece Job Link Pressure Probe: www.trutechtoo...
Appion 1/2" Hose: www.trutechtoo...
Appion 3/8" Hose: www.trutechtoo...
AccuTools Core Removal Tool: www.trutechtoo...
Malco Sheet Metal Snips (Left Cut): www.trutechtoo...
Malco Sheet Metal Snips (Right Cut): www.trutechtoo...
Malco Sheet Metal Snips (Bulldogs): www.trutechtoo...
Malco Sheet Metal Snips: www.trutechtoo...
Malco Turbo Shear Cutter: www.trutechtoo...
Malco Sheet Metal Hole Cutter: www.trutechtoo...
Malco Flex Duct Cutter: www.trutechtoo...
Malco Panduit Gun: www.trutechtoo...
Malco Sheet Metal Hammer: www.trutechtoo...
Malco Turbo Crimper: www.trutechtoo...
Malco Sheet Metal Pipe Crimper: www.trutechtoo...
Malco Reversible Hex Driver: www.trutechtoo...
Malco 24" hand bender: www.trutechtoo...
As we finish up a Gree ductless heat pump mini split install, the customer says they have another hvac unit not cooling that serves a classroom. In this video I have an update on my Nissan NV2500 van and I got a new Veto ProPac toolbag along with showing how I fixed the Carrier gas split system. Hope you enjoy the video!!
#notcooling #hvac #hvacrepair

[@scrivyscriv]

Your van storage reminds me a lot of how our tool room at work (aircraft mx) organizes tooling.. It is incredibly useful and eliminates 99% of all the questions of what something is and where it should go. Nice work.

[@darrankelly4963]

I'm going to try and be as constructive as possible. I don't know what your intention is with this channel but your videos don't provide much learning. Personally I find they seem to come off as a tool/truck show off and an excuse to flash a sponsorship under the guise of a learning experience/diagnosis channel. For example this is a 20 min video with a clickbate title, 15 min of van tour and admiring your own work (which does look clean, not hating), then 5 min of a service call where you hook up some probes and show a 0.9 superheat (!!!???) then say it's running perfectly only to blame the thermostat schedule... You point out that you need to know the metering device in order to check charge, then you don't check the charge according to manufacturer's specs. Man, teach us the details and the nitty gritty, your tricks and tips. Look at the big picture and and take your time. Or... If you want to post a truck update do that. Just drop the clickbate. For now I'll stick with HVACR Videos and some others where I learn something new every video. Regardless of all the above I wish you luck with your company and you tube channel.

[@zunar_j5_933]

Get a good security system for that van!

[@theusername07]

It seems like your true passion is organizing and creating efficient processes. Keep up the good work.

[@dutch661]

I can see the apprentice getting that van when he's capable and Zack will be back in the diesel.

[@GB-ue6wr]

Dude you are so dialed in.. all the tools to make your jobs better and easier.. keep up the work.. inspirational!

[@b-2466]

Man I'm peanut butter and jealous of that set up. 👊🏻

[@augustdrew6870]

Love your videos man, just started RSI in Chandler AZ to become a tech & I am also an apprentice at the same time. You have set a standard of a tech van all the way to finishing the job.

[@drewaholic8009]

Phoenix.

[@brandonsteel8251]

Welcome brother. I'm out here with Goettl! Installer

[@mattdigiacomo1548]

I went to RSI too. Worked at George Brazil/ Patrick Riley for like 3 years. Now I live in Kentucky and got my HVAC masters license

[@ryb1906]

Seeing that van and tool set up made me just quit my hvac career.. If we ain’t doing it like what I just seen in this van .. we need to go and do something else. Hahahaha.

[@not.enoughto.go.around6176]

0.9 superheat????

[@Rhahdhdn]

I always get service calls that have issues like all dampers closed or people don’t know how to work a thermostat 😑

[@AndyHoltOutdoorUniversity]

You did an outstanding job with the van. Clean and functional. Can't wait to see the rest of the build out. Microwave oven?

[@jamesortolano3983]

Microwave nd a mr.coffee,was a must have about 8 years ago when I was installing out of a box truck. Very impressive set up in this van !! And his ductless installation was tits! When I got my first bending tool ,the old guys made jokes. Now I'm glad to see it's a standard for good mechanics. Oh nd the reversible action wasn't yet an option. Keep on rocking!!

[@DavidHernandez-gt9bo]

Well organized as usual ! The right tools make the job go so much easier . You a have a lot money invested in all those pack outs …. Awesome !!!!

[@Jugc0006]

Your soo organized, love it

[@Eddy63]

Van setup looking better & better ... Like that open top Veto Pro Pac ... Thx ...

[@pedrojuarez5834]

Admiring your van and shelf set up really organized at 100% how it always needs to be

[@martinheatingcoolingmartin4693]

This is an excellent video on organizing your set up. Thank God you don’t need to do boilers and oil heat. My setup gets crazy difficult due to the mixed bag of equipment in Maine that we have. I realize wish I could limit what I do down to gas heat, warm air, heat pumps and AC. Then I could have a straight forward set up like this! But as of now, it’s so hard to make a set up for things as I’d have to have so many boxes and extra items. Oh what a minute I do, and I’m running of of space and can barely walk through the center of my medium roof medium length ford transit 🤪

[@martinheatingcoolingmartin4693]

(Really wish) not realize

[@carlyleworkman1928]

I also like the van layout.

[@latenitehvac868]

Lol, the messier the van the better the tech

[@mattbilodeau2433]

Hahaha facts 🤣

[@garciajr913]

Dam right lol

[@Mapdotgolf]

That’s a lie. I’m a beast but if my vans messy I don’t even wanna work out ofnit

[@latenitehvac868]

@@Mapdotgolf no time to organize got to make it to the next call

[@Mapdotgolf]

@@latenitehvac868 it’s called after hours weekends. Plenty of time

[@Primslim101]

Just started my new service job so I'm definitely copying everything in your bag!! Haha Great content keep it up! ❤️

[@bobboscarato1313]

You better have plenty of dough; it's very costly!

[@sickbabytroll9411]

Just add a tool to every po your work gives you you'll have everything in no time

[@Primslim101]

@@bobboscarato1313 very true but I have a lot of the essentials so it shouldn't be too much... Hopefully lol

[@crapmusstank6558]

Just inspired me to clean the truck out on the spot. Lol thanks bro...

[@joseorta9928]

You should donate the old tool bags fr those who are just starting out...

[@PawsumGaming]

Oh man... that organized van is amazing..

[@williamserver4332]

Nice clean install.

[@robertwood9628]

Very nice setup...hope you have a good alarm system with video capability

[@hashimwaheed4906]

love the setup.

[@Chris-ru3ri]

Surprised the coil wasn’t leaking. I’ve replaced a ton of those.

[@ReliableHVACR]

Clean set up, I'm doing something similar 👍🏽

[@richardprater4653]

I have that same van and love it. What kind of flooring is that? I don’t care for my flooring in the cargo area

[@onenikkione]

Nice clean proper install

[@coreymadden3650]

Installer here i love my packout always adding to it

[@johnwalker890]

Good job Zack, I think the van looks great.

[@DadBodRocks]

Nice set up, can you do a budget setup stuff you can make like packout style

[@zesty2023]

lol that definitely doesn't look like a truck that does much actual 'work' if you know what I mean.

[@Ebon_Wolf]

You got that right . My van is an organized MESS!

[@Paulie1232]

You better hope that truck never gets stolen

[@Niegocki28]

So how did the small handle work for you? Where did you get it?

[@Cavett24]

You should put foam in the middle of your "mini split kit" and trace out spots for that madness. Same goes for you soon to be "duct kit", sounds like you're playing yatzee with a coffee tin full of bolts.

[@Jugc0006]

That unit seems overcharged super heat was low and subcool was high. What do you guys think.

[@brunosoares4146]

Your tools top💯

[@chrisjoe4079]

Nice tools sir

[@thesilentonevictor]

Looking good so far 👌 Zack

[@xVizzeh]

Great video lots of different stuff going on 👍🏼

[@jakeholcombe4002]

Sweet install great job

[@bills6946]

Sounds like a custodian swapped out the stat and didn’t know how to operate it. Someone closed the butterflys and forgot to reopen them.

[@kaydubzz]

i think you might need to start riding passenger side to distribute the weight lol looking clean nice work.

[@Christer885]

Your van is amazing 😊👍🌹

[@strivinghigher7005]

Nice set up!

[@prestigemechanical3600]

Nice setup. I keep one side of my van wide open also and store vinyl tubing and things like that on the right side

[@baystextracts6421]

Just got called on that outside unit has to be 3inchs from ground level 😳 😅 😐 Goodluck looks good

[@CSpad]

Depends where you live. Florida we need a min 3" curb

[@keepnitkool9042]

Does your maintenance kit, the two packouts latch together?

[@your_local_hvac_tech2232]

Can you post a link for the malco bit?

[@Aquariun9iteMMare]

Shouldn't you add some refrigerant since the Superheat was 0.9 & Subcooling was 18.7. Also, wouldn't you add refrigerant to raise the Superheat and lower the Subcooling? I get what you're saying about the dampers being closed because airflow is the most overlooked aspect of this trade. I ask this sincerely, because there is so much of this trade I need to learn.

[@tomr3522]

To charge a piston properly you need to know the wet bulb temp inside, dry bulb temp of the condenser. Use a target superheat chart or an app now to calculate the proper super heat required. Also you’d charge the unit to raise subcooling, a lot of subcooling means refrigerant is backed up in the condenser, no subcooling means the condenser is starved and you’re basically pushing hot gas. No superheat means the evaporator is flooded with liquid refrigerant.

[@ethank2466]

Nope, a low charge scenario would be high superheat and low subcooling. Never add charge to a system with 0 or very low superheat.

[@deanoplumbing]

Hi I would like to know what is the app that your using to check system charge thx

[@tylerleberman7271]

Does your company supply you with tools

[@pankajactechnician9110]

Can you please how to get a job video makeing in hvac feild

[@petertoth1808]

what do you have service car? nissa what?

[@mattdigiacomo1548]

I think that was a Polypropylene furnace. It’s obviously an older Carrier 90% but if it is the poly version instead of the newer style (they started the newer style around 2012-2014ish) then I would for sure pull that blower motor and check the secondary heat exchanger. The Carrier 90% Polypropylene furnace is most likely the most dangerous furnace that was ever made and definitely has no business being in a school.

[@IamHimathy420]

Nice van, looks like $3k in totes, containers, an tool bags, shheeeeeesh

[@tphvac87]

Oh man do you really like gree? I’ve had nothing but problems with them…

[@richardthomas1743]

Hello and thumbs UP!!

[@myHVAClife]

I guess anyone needing a motor is SHIT OUTA LUCK! Nice set up but it really does not seem to be service friendly when it comes to parts and repairs!

[@bobboscarato1313]

He's just showing you how to make money sponsoring different suppliers! He has a nice and useful van.

[@electricrenfro1480]

yo aint no way #1

[@FamousDraco615]

Noti gang 💯❤️

[@videos10]

Get some damn dirt, grease, blood on your tools!!!! -.-

[@Mapdotgolf]

Those tstat suck

[@stephwaylonwells3218]

👍

[@mikev.1034]

👍👍

[@channelcatchaser9426]

ZACH why do you use so many different brands? You don't seem to be loyal to anyone.

[@bobboscarato1313]

He makes money sponsoring different manufacturers and suppliers! Nothing to do with loyalty! Money money and more money!

[@jayr49]

Who makes that battery powered flaring tool