Why????

[@nightstorm9128]

That planter looks more complicated than the space shuttle,,,

[@markreetz1001]

And the space shuttle can't plant corn....

[@jimhancock5047]

Why not???? Keep your neighbor farmers guessing "What is Andy doing now?"

[@davidholder3207]

I was one of the screaming "lay it horizontal" crowd. Seemed obvious to me.

[@FarmingFixingFabricating]

I have to play the part and add to the drama

[@MorganOtt-ne1qj]

"Hollywood Hourigan"!!!! 😂

[@TsunauticusIV]

I ran a 988 for quite awhile. You think they’re big until your coworker pulls up in the 994 and makes you look tiny. 😂

[@PAYNEKILLER..]

Andy needed a 996 to pack bunk! Haha

[@ireneknight8701]

EVERYONE, Please don’t forget to hit the like button.. Thanks to Andy and the team for the great show ❤

[@timjorden8329]

I am excited to see the new rubber on that tractor. Gonna look good

[@kaldudas9651]

You had that mounting bracken figured out after the seller of pump told you were they thought it should go. They should be paying you the rights to the mounting bracket set up.👍🚜

[@garygardner5672]

Make sure you send your "re-engineering consult fee" invoice to Shaffert. Those desk jockey engineers sometimes need a course in real world applications.

[@OOpSjm]

Annoying comment. It is made to fit a "standard" layout. Does it fit every possible model and option configuration? No. Just a given.

[@Failure_Is_An_Option]

Stop on by anytime Gary. Ask for Shane. I'm the desk jockey you speak of. Never even set foot in a tractor.

[@bradleygarman3436]

It's amazing how the keyboard farmer''s think they know everything 😔Keep up the good work Andy.

[@allanvilleneuve6709]

Thanks Andy, Another great Video. And thanks for the parlor update..

[@stevenclaeys6252]

Thank you for another great video. Cheers

[@beckyumphrey2626]

Great video.. Thank you.

[@duggydo]

We had 1 of those as a primary production loader at an underground mine I worked at. It was almost too big for the mine.

[@justinwharry8148]

Finally someone recognizes me as an expert.

[@philglover2973]

Awesome video thanks Andy nice job top team 🚜🚛🚜🚛🚜

[@kevingordon7426]

Good thing you have the experts. You are getting the job done.

[@steveb6103]

I hope they bring more than 2 tires. That inside rear had one big flat spot in it.

[@jaywilliams1525]

Been there done that with a similar system on my 24 row. It’s a lot of messing around for sure getting it all figured out.

[@flytwin1772]

Next winter Andy, I see you building a new plate for pumps and filter which will fit more perfect then.

[@dsmreloader7552]

Looks like it was meant to be there. You can now charge the company for design and engineering services 😁

[@brucesetter8724]

I always hated getting a new planter, it always seemed to take days and days to make it right.

[@peteschiavoni]

They should pay you consultant fees for making it fit, then you can share the proceeds with your experts😂😂😂😂

[@jeremygrubb1434]

I ran a988g and 992g first edition for a couple years that was cat’s way to get away from the double boom but they have since went back to the double boom I liked the single boom you could see really good but it took away from there digging power I’ve noticed Andy your luck is like mine every time I buy something that is supposed to fit it never does always have to do what you did make it where it will fit but great video keep up the good work and I hope you all have a great year

[@kenjaminhanson3853]

It's a good thing you have experts to help you get things done. 😂😂

[@kevwin3429]

Twisted tea. Refreshing.

[@jerryrobson9309]

Great job Andy. Awesome videos. Always watch all of your videos

[@gwbuilder5779]

40 inches..... Are you sure 16 will fit???😂 Have a great weekend Andy!🤙

[@Snapoff.]

As a turf tech for Cazenovia equipment soon to be SNP I love watching your videos. Keep up the amazing work.

[@FarmingFixingFabricating]

Thank you…. What store do you work at?

[@Snapoff.]

@@FarmingFixingFabricating the fulton location

[@nickpersenaire4443]

Nice one Andy, keep up the excellent work man.

[@billpotmesil]

Andy, I love the kidding around! Keep it up!

[@steves.7872]

Nice video Andy, thanks for sharing.

[@ronaldfeuerstein435]

Always a good time to watch you show the engineers who think they are so smart how things are done. You should really Patton your new fabrication ideals. The right way its done...

[@MorganOtt-ne1qj]

Sadly, today's engineers don't seem to have a clue as to what their product is supposed to do, and even less idea of how to maintain it. Like putting a grease fitting behind 3 shields that take 4 different size wrenches to access, sometimes daily. Or 3" tall filters with 2" of access. I can go on....

[@ronaldfeuerstein435]

@MorganOtt-ne1qj yeah I know what you mean. Seems like all they are thinking about how there going too pay for there next vacation and where.

[@markreetz1001]

Are you trying to prank us again!? LOL! You know what can happen! Good video, Andy. I don't know how you fit all that stuff on the planter. Thanks Andy.

[@charleslynch7274]

Great video as always Andy

[@TheMr9fingers]

Good Video shows your creativity in being able to modify the bracket to fit. As for the Loader nice that you could let them park in the farm yard

[@steveanderson2095]

Well done. Just wondering if putting say 6 inches spacers on tank bottom support to lift tank up could have been another option if it did not affect centre of gravity to much when full.

[@millennialcarpenter1784]

iv been waiting for this one andys steping up his game

[@280813jb]

Andy, great re-engineering job.

[@greg10469]

988G , 55 tons, 475 hp = too much loader for your farm lol

[@kevwin3429]

Narrow transport planters are nice, until you try to add accessories.

[@billyrogers9624]

How did you go about adding the extra tanks?

[@kdiekman]

My grandpa always told me to keep your eye on the dirt, it will never steer you wrong.

[@mikeznel6048]

Was that a 25 foot wide blade magnetic Milwaukee tape measure you were using? That is my absolute favorite tape. They go on sale at home depot around Christmas, 2 for 20$! I bought a bunch of them last year.

[@FarmingFixingFabricating]

Yes it is

[@mikeznel6048]

@@FarmingFixingFabricatingThought so. Have one on my side all day everyday.

[@aaronb4286]

Just enjoy watching you go through the fabrication process with a brand new planter

[@scottwenger7577]

Amazing you can ever get anything done correctly without us Monday morning quarterbacks

[@gatorsadventures2298]

From my Keyboard Cowboy position, you should have tossed that planter and bought one that the pumps fit on W/O modifacation. LOL

[@robertmarino2158]

Andy , yes he will make it happen , your talent really shows , congratulations , stay safe , enjoy !

[@JerryHoltan]

I assume that they want to have a relatively coarse filter to protect the pump and a finer filter to protect the valves. For me that means that the suction filter (before the pumps) should be more coarse and the pressure filter (after the pumps) should be finer. I expected the 80 micron filter before the pumps and the 50 micron would be after the pump.

[@FarmingFixingFabricating]

That’s how it’s setup

[@SLCFarms]

You know if you just laid it down you wouldn’t need experts. Lol. Great job Andy love your fabrication skills.

[@PeterLee-zn3jl]

Farmer fixes in the field... usually dont need improvement..shed built are better. You guys build so much stuff..I HAVE FAITH YOURS IS GONNA DUITYOUR NEEDS. CARRY ON.

[@robertquast9684]

I would have guessed it was a sand loader for scooping out the lagoon.

[@Chuck-Guyitt]

And get back in place. As the great Joe Ganan { the appliance doctor} would say “its just that easy"

[@komatsuguru]

That is the size loader you need to clean out the manure pit.

[@piervalsa]

the master surgeon at work.

[@bigmackstruckstop9213]

Enjoyed your show Andy

[@standudek1372]

Wow your rumors are almost as fast as c.n.n. nice planter hope you fly thru planting season with out gremlins

[@davidlavoie2490]

? Do you have to winterize those pumps or do they drain out dry for the winter. Looks great

[@FarmingFixingFabricating]

The fertilizer doesn’t freeze

[@joepfeiler5911]

I am a little surprised they are hauling that 988 G with the bucket on. I have seen them hauled around with the bucket taken off and hauled separate.

[@spudth]

ALL RIGHT??? I was looking for a "WELL". Andy, disappointing.

[@brendon9489]

That's a big loader! Thats what she said! Lol

[@donniehodge2548]

Another good one Andy I enjoy your video's KEEP THEM COMING 👍 🚜🇺🇸🐄

[@m9ovich785]

Thanks Andy, I to had the Thought as Why not mount it Horizontally and rotate the Filters. Which brings up another question. What good is the 80 Micron filter if the 1st Filter is 50 Micron.? Mike M.

[@rl3898]

Maybe the pump breaks the lumps into smaller bits!!

[@m9ovich785]

@@rl3898 50 microns are smaller than 80...

[@Dennismelnychuk]

I was hoping you were gonna tell us you bought the loader for less than scrap price and you were gonna dig a couple big lagoons then park it for a tourist/ play structure for future grandchildren !

[@bombardier3qtrlbpsi]

Isn't that against the law kidding in public 😂😂 I say sneak the loader off and see what it weighs😆😆

[@Northernman68]

Awesome video Andy,what are holstein bull calves bringing in NY ??

[@FarmingFixingFabricating]

Few hundred

[@erichartwell1229]

whatever it takes andy

[@jackthewisedog5171]

I thought the big loader was going to be used to push up silage and pack the bunk ? ? ( I am kidding )

[@rayhein8205]

Very nice modification and install! Manufacturer may owe you a design fee!

[@mowerjeff8990]

LOL your going to have to start charging these companies engineering fees. You could use the loader to load pen pack.

[@johnhenderson299]

Great video there will always be no it all's.

[@tomtubman]

Hey Andy , Lol You would look great driving a CASE big red !!!

[@norman8269]

That big loader is what you would see around here in the coal mines loading these trucks with coal. I was wondering why that pulled in there before you explained it lol

[@Oliver-kv2mm]

2:54 More Jake Brake!

[@anthonyjames7535]

Andy, I am just curious on how you ever made it farming before KZbin? 🙃 I mean you got it made now with all the professional and expert help via KZbin.

[@martinboilard2265]

Hi Andy ! Maybe Andrew new toy ! haha! you have a beautiful planter and good job on it . Thanks Andy for your time and everybody have a good day at the farm ! 🙋‍♂️

[@mannsjm]

Junior could load out box stall manure in a day or two with that 988.

[@steveharrington301]

👍

[@dennislamers986]

But Andy I can't read the manufacturers name. Cane you make a "flag" pedestal somewhere on that bracket? Another great modification that will be used somewhere else.

[@danielyoder5928]

Google Foo says it weighs 117,000 lbs give or take a few hundred.

[@STONEDay]

Why? Andy bought the wrong one. LOL. Kidding.

[@kenpolito9924]

Looks great

[@scrotiemcboogerballs1981]

Thanks for sharing

[@keithvanpolen9049]

Great job Andy !!!

[@craigmay8888]

Pump and filter on one side pump and filter.

[@randycharest4507]

I ENJOYED WATCHING THE VIDEO ANDY 😊

[@chrisstalsonburg]

Let lil Andrew plant corn this year

[@dannycrooks8462]

You could push some grass with that 🤣🤣

[@roba4297]

Do you think it's possible to make kit to plant seeds any more complicated with more possibilities for tripping into failure mode ???

[@FarmingFixingFabricating]

It really depends on the mental capacity of the individual who is running said equipment

[@gypsyjack49]

You have to listen to the bloody arm chair experts thought Andy. The only problem is you could have the machine nearly worn out before they come up with the answer.

[@brandonzipfel8398]

Would the pumps have issues operating on their side? I really have no clue on how they work, was just curious.

[@FarmingFixingFabricating]

No they wouldn’t

[@brandonzipfel8398]

@@FarmingFixingFabricating Awesome! We had an inline gear oil pump take a dump supposedly because it wasnt vertical

[@SlipShodBob]

Our local Kubota did the same for us. Our largest tractor is only 110hp aa we are only a small livestock farm. When we had just lost my dad which I was still trying to come to terms with as one month he was making hay with me and weaning the animals the next he was dead within two weeks of being dianosed with stomach cancer. In those two weeks you could tell who were friends and who were gosspis the former just stated they were sorry ro hear he was in hospital and if we needed any help let them know the others would constantly be messaging coming up with various thoughts and guesses as to why until we said then after losing him it was constantly so what are you going to do with the farm which got to the point mum had got fed up with the constant asking and said its going down to solar panels or her other go to caravans. While my brother who doesn't actually work on the farm was looking up how much it would it would cost to get a wind farm company logo etc embroidered on a jacket and some clothes. Kubota on the other hand did me a solid one of their larger M7 tractors which after the did you see and not even in the ground comments shut them up as it was they were driving it back to their workshop for a customer while trying to work out which sensor was causing it to randomly derate itself they were about to hit rush hour so asked if the could park it up in our yard. After the weekend they ended up getting it fixed and took it back to the customer. But it shut a lot up.

[@EFCasual]

Best of luck to you.

[@RobertWilliams-mk8pl]

Fabricate an offset base

[@forestlawrencegrading9154]

Experts say Pat your head and rub your tummy

[@paulpeters5199]

That’s an old Pennsylvania loader beckwith isn’t in business anymore it’s Cleveland brothers cat now

[@gavinperry7237]

Not surprised you have to modify things as “FFF” certainly covers all the aspects of your daily work !

[@opelman]

Hey from finland.

[@user-ik5cd8np6b]

Could have mounted it vertically on the side of the rear ladder and probably saved 3 hrs of fab

[@FarmingFixingFabricating]

It’s that where you mounted yours?

[@sharonromer6606]

Didn't think it would fit 😵‍💫😅

[@craigflatley7370]

🇨🇦👍