WIDENED STEEL WHEELS (NOT BANDED)

[@trentdrummond3147]

gave a completely new character to them. love the dish

[@Urchfab]

Cheers.

[@SpaceShipDeathstar]

You never fail to amaze. The correct diameter measurement is such an amazing life hack!

[@tomuchfunwithgas846]

I used the same process with my 47 Ford back in the 70,s. Reversed the rims , using the auto to center the hoop. Not some fixture. Worked perfect. Been doing it that way since back in the 30,s I guess.

[@toxaq]

Such a fantastic look. Might go for that over minilites when my Mk1 Escort ever hits the road again...

[@alic4788]

Great work, but it's giving me an eye twitch that the valve hole isn't lined up with either a spoke or mid point between two.

[@conradxzavier4913]

i know Im asking randomly but does anybody know a trick to log back into an instagram account? I somehow lost my account password. I love any tips you can offer me.

[@crosbyethan2761]

@Conrad Xzavier instablaster =)

[@conradxzavier4913]

@Crosby Ethan Thanks so much for your reply. I found the site through google and Im waiting for the hacking stuff now. Looks like it's gonna take a while so I will reply here later with my results.

[@conradxzavier4913]

@Crosby Ethan It did the trick and I actually got access to my account again. I'm so happy! Thank you so much you saved my account :D

[@crosbyethan2761]

@Conrad Xzavier You are welcome :)

[@nealnaz]

You are a creative and talented fabricator and I appreciate the many videos you put out for us.

[@SB-yq3sn]

I like the fact that you don’t compromise and take the extra time to do things right.

[@demonhighwayman9403]

They look great and it also keeps some of the original character of the car, worth the extra work I reckon.

[@ninjabob8170]

Rostyles! Dad had them on his Mk1 cavalier and his Ascona. Fond memories of polishing the chrome hub caps with autosol as he washed the car as a kid. 👍🏻

[@BenHur872]

Really interesting - I love that you've found a way to do these deeper-dish wheels in the "right" way to make them look better. The results will be worth it even though it took longer

[@clivewilliams3661]

I very much agree with you.

[@adven999]

Looks great, intelligent way of trueing them up..... I would have had to line up the valve stem hole the same on each wheel in line with a spoke..!

[@seankearney6915]

I have also seen them welded up and a new hole drilled on the flat part. Why, it was used on circuits and if you run off into the rough you never pull a valve out.

[@andybtec]

It's funny how a lathe seems big enough when you first get it but they seem to shrink

[@chrismechanic2000]

well you will always get a project that is bigger than the lathe, saying that, some lathes you can remove a small part of the bed up by the chuck to turn larger diameters.

[@jakobrebeki]

@@chrismechanic2000 i work in a machine shop, we call that "pulling the gap" and yes it can be a life saver sometimes....

[@raychambers3646]

My Cavalier had similar wheels but with an added stainless beauty ring ,looked very smart. This was the 80s trends change.

[@joelpalmer]

Another difficult and complex task made to look easy. Wheel modification is an art and this project is excellent for how you break it down. and then execute it. Well done.

[@malcolmlane-ley2044]

They look amazing, I've never heard of such a rim option being available, well done.

[@WRXBase]

That was some excellent engineering and machining. Knowing what to do with something like that is stunning to me. I learned quite a bit here.

[@brdnsky6417]

Time spent will be worth it in the long run. They will look good and something to be proud of. Ronnie.

[@koolkar55]

Love ya work Matty. Can't wait for the build & driving. Cheers Billy J.... Beaudesert, Queensland, Australia.

[@philiprush2266]

I’d have loved a set on the back of my HSR back in the day they looked great

[@jasoncooper3116]

I think at some point, all car guys have thought about trying this. Great job. Those rims are awesome!

[@terencehawkes3933]

Good tip for measuring inside of the wheel. Thanks Matt! I did not know you could just buy barrels. I learn something new every time I watch your videos.

[@hummv8]

Mag nificent job!!!

[@arthursmith5409]

Very nice, today's technology. Build wheels yourself at the offset you want! I dreamed of doing this back in the 80's, with my Pontiac and Oldsmobile rally wheels! No one did this then, where I lived.. looking at your nice rims, fatted out with lip is the very picture I had in my head back then!

[@glensgraphix]

I'm always im pressed with your skills. But I'm blown away at how true you got these rims! Fantastic and they look the goods too.

[@theessexhunter1305]

with my big lathe I plunged in on the welds on mk2 golf wheels then spun them over so it added the foot print 40mm to the out side for a guy doing racing. I tapped it true on the big lathe and they ran spot on. nice job you did.

[@cmb1972]

What a Wheely informative video.

[@bradstanley116]

Wheels turned out awesome. Can't wait to see them on the car

[@philtucker1224]

Matt, those widened Rostyle wheels are beautiful. They look like a genuine factory wheel and when nicely painted will be perfect 👌 Nice job.

[@beezo2560]

The wheels turned out awesome. Super fat stockys. Can't wait to see 'em powder coated.

[@stuartcollins4473]

They look so much better, I'm sure most people wouldn't notice that they were the standard wheel centres in different barrels. 👍Top work as normal.

[@mrshifter5007]

Nice job👍, thats the best way to go if you want wider wheels. Banding wheels was a thing back in 70s and it got a bad reputation . But like most things, it depends on the quality of the work, and who's doing it.

[@manfredschmalbach9023]

"We gonna need a bigger -boat- lathe" - syndrome. A classic.

[@N-Scale]

Nice to see you again. Mike

[@micheltebraake7915]

In England there is a much larger car aftermarket parts supply than in the Netherlands. If only I had known about this option to widen rims before, I would have had fewer problems. Thanks for this information Matt!

[@rektautomotive3483]

They look awesome Matt, when you were doing the pcd on cad, did you use the “polar array” tool? If not it’s worth having a play with as it will draw you a pcd based on how many holes you want round the pcd and do it in 1 step 👍

[@g0fvt]

Bloody excellent video as always, would have loved wheels done like this on my old Fords back in the day. The banded wheels I had were not well finished so you could see where they were banded. A very educational video, just 100% made sense, would utterly trust your work.

[@robbiemulholland6477]

The jig you made for the banded wheels is really impressive! The wheels look awesome 😎

[@freedomman06]

Incorporating a dial indicator into that jig would go a long way to getting those as perpendicular and true as possible. Nice work mate.

[@waynespyker5731]

An indicator with a magnetic mount for your fixture (or 2 if doing more than car). Like using the car hub if not constructing a fixture.

[@NaveenKumar-oj7xh]

You can make smaller parts like coasters, pendants, keychains, rings, watch bezels, bracelets etc.

[@itsstocky1955]

Yeah I dig them! Will look smart as on the car

[@Urchfab]

Thanks

[@Jonathan_Doe_]

‘Just wiggle it side to side until you know it’s tight’ 😂

[@b1g1lz]

Years ago when I banded a few sets of wheels, I couldn't believe how much variation there was in the standard rims. I found some rims weren't the same width the whole way around, they could be 1/4" wider at one spot than another. I mucked around a lot to try and get them as perfect as I could but like you say, a few wheel weights does the same thing.

[@danromeo6571]

One man in shop. Nice work.

[@roddas26]

Nice work Matt, cheers from New Zealand.

[@100Jeanluc]

Once again, great work and beautiful welds.

[@jamesbailey3821]

Intresting, old skool. Worth the time.

[@rustysanchezgarage]

Nice work 👍👍 I know there is loads of videos of banding wheels but I will like to see your gig in action

[@deopersad2915]

Awesome 👍🏻👍🏾 yeah I had my rim's widened for my mark 1 escort, but in New Zealand we have to have them certified, but here it cost way more the steel rim 😞😞 I was going to do part of it myself To keep costs down also because you can get them chromed before assembling 😀👍🏻 they will be awesome , with low profile tyres 😀🤙🏼

[@Ecosse57]

man those wheels look great and i'm glad you went this route. look forward to seeing them done and mounted!

[@Urchfab]

Thanks 👍

[@kevinlyon9501]

Neat wheel solution, didn't know you could just buy the barrels.👌

[@Urchfab]

Me neither

[@imouse3246]

You never know unless you ask. ;-)

[@keithjones4325]

Think I have them done on my cavalier coupe instead of the alloys looks awesome

[@mixalisstathis274]

LOVE THE INTRO!!! And Capt'n Thunder-Clap. 👍👍👍

[@daviemaclean61]

Great look for the Chevette. Every "five minute" job takes at least six!

[@geoffhalstead1811]

Don’t you mean 10-20min?🤗

[@daviemaclean61]

@@geoffhalstead1811 ;-) Ever the optimist Geoff!

[@geoffhalstead1811]

@@daviemaclean61 👍👏 From experience😂😡

[@neiljarvis8911]

Excellent video, real quality job - got a cob on though, 'cos I want to see them finished and on the car now!!

[@paulhenry4205]

“You spent a lot of time on them wheels” but the result was well worth it. 👍🏻

[@alanizzard2584]

Hi Matt, are you going to do any more of the diy weld dice. the listing has finished on Ebay

[@garagemonkeysan]

Nice video. Great level of precision. Mahalo for sharing! : ) 🐒

[@Mr7yhnmki8]

I wonder how he’s going to get that tire off the old rim now? Dynamite?

[@stevelewis9677]

Most modern tire machines don’t use the hub when holding for removal of the tire

[@davidyates748]

Nice video Matt, another thing I didn't even know existed!

[@pirreli5]

are u a certified welder matt? your skills are awesome!!!

[@klegraefe]

the dish make s all the difference!!

[@wrathofbod]

Looking great, always loved them on my motors back in the day

[@raychambers3646]

Fitted to my Cavalier, i used call them roe style my mate called them Ross style ,rostyle ,cant make up my mind.

[@wrathofbod]

@@raychambers3646 we called them Steely's, i used to paint the black inserts Red

[@djyjrlz]

This inspired me to go right out and buy some of those barrels. Had some stock steels for my spitfire kicking about that I intended on banding and this was the solution that I needed 🤙🏻

[@shauna260]

Hi Daniel, I was going to do the same with my spitfire. But my idea rather than banding was to make a wider Steely using two rims, cutting off a small amount of each rim, then welding them together to produce the widened rim (one weld instead of two on a banded rim) if that makes sense. But after seeing these barrels I now need to measure the spit wheels and see if they will work.

[@djyjrlz]

@@shauna260 as a little update to this, I’ve just returned the set of 7j barrels as they’re too wide to fit onto a spitfire, swapped out for a set of 6j’s and they’ll fit up fine. Although the centres are a little small for the bands I think I can make it work

[@fazorboy]

Did you ever get this to work as I've just ordered a 6j to have a play and see

[@jesscneal]

Great job Matt. Those turned out super nice 👍👍👍

[@trevorjarvis3021]

Nice job on the wheels Matt, awesome! 😎

[@stevenstratford7549]

Have these wheels on my micra..would love to do this...

[@steveb5584]

Brilliant work mate !

[@jasonbailz9754]

Amazing work. You are so smart. Wish you were in Australia to help me out.

[@teddyr7391]

After lockdown a great raffle prize would be a day in the shop getting some welding/fab tuition. Could film it also so a double win win situation.

[@JeanMelim]

Amazing job. Thanks to show us. Best regards.

[@donfinch862]

Top job Matt.

[@What..a..shambles]

Nice choice squire 👍🏻

[@tofforpwood5068]

This is what I was after years ago for my midget rostyles! Still up for ditching my minilites and having something like this. Seem to remember you recommending someone else to band them but this is way better!...Worth a chat? Hope you're good dude.

[@wayneclement7201]

Yes Matt! They are sick!!

[@metalfruttolo9855]

Nice! I band steelies cause it's easier and cheaper to make "weird" sizes, like the 13x9 on my bodydropped mk1, but having a single piece barrel is cool too

[@DustinSeiger]

This was super interesting and enjoyable to watch

[@beachdad56]

A proper 2 beer episode ( in California so 12 oz ipa, not real pints)! Nice wheels!

[@Urchfab]

Steady on!

[@ericguynard6659]

Bravo très beau travail comme d habitude ...!!!👍👍👍😉😉

[@jerrydonnan8665]

Great job on the wheels Matt. What are you doing with the Chevette tyres? Let me know what size they are if you're selling them!

[@brianalder2234]

Nice one ! Great product no one seems to do 16in dia though ! Why's that I wonder ? Great video ! Keep it up !

[@danjohnson8543]

Those wheels look the dogs danglies 👍 relatively new to the channel and looking forward to seeing the Vauxhall Chuvit all the way through the build, can’t wait.👍👍

[@Docv400]

Do you have an up to date link for the Wheel Barrels please? I've searched and searched, can't find anything in the UK. Thanks.

[@callumtrapski6096]

Let’s get the band back together Matt

[@rogerfrancis65]

Excellent choice, the Rostyles look so period correct for the car, tyre choice for 13" tyres is a bit limited but hey what can you do?

[@rogerfrancis65]

Needs the chrome trims finish the wheels off tho, and a furry dice!

[@KhalsaDhiForjj]

Can you make custom deep dish steel wheels? For ford cortina

[@renomacca1967]

brilliant should fit a side on engine mount and fit it to the bender base so its not fitted to the flywheel end mounts

[@BumDog2112]

Those look amazing!

[@vincenzo62]

they look great!

[@peterbonnez]

Good job done there.

[@tomscustomshop]

Another Awesome vid! Clever man! Love your work. And that fixture table is sweet!

[@jamesbarnes4619]

you should get a mag base and plunger clock

[@builtbybagsy]

Great work as always.

[@stevesimons6333]

How about tacking them, then put the wheel on the car and next use a dial indicator for true runout?

[@adeh503]

They look fkn awesome Matt

[@peterleid5060]

Brilliant use of available high quality stuff 👍just ONE thing... where do I get a hat/cap/headgear item like you are wearing? Considering the weather we've been experiencing of late, I wish I'd had one of those! Maybe you could attach a link to it on your channel page? Many thanks for another excellent video. Thoroughly entertaining and educational to boot! Cheers 🍻

[@martiniv8924]

Emperor Rostyle ! 😁👍🏻😎

[@jorgeconcepcion934]

Greate good work blessing from Puerto Rico.

[@bakuoldschool4482]

Cool dishes we got now!!!👍

[@SAdeCVetc.]

Really nice, you do work for other people? Like If i want to do my set of rims advice thanks

[@stuartburgess2409]

If a jobs worth doing do it well , great look on those rostyles like a 70's touring car Firenza , so cool 😎