Wilkinson 1302 Tremolo Installation Fail??

Learn more about all of Warmoth's bridge routs here: www.warmoth.com/Guitar/Bodies...
Building Parts vs Complete Guitars video: • Building Parts vs Comp...

[@eddiejr540]

Measure twice...and measure again!!...Aaron I can’t think of another company that would do anything like this video...my hat off to everyone over at Warmoth....fair play indeed!!!!

[@jackp8583]

Even though this doesn't apply to me I so appreciate that specific info like this is made available. Thanks, Aaron! 👍🏼✌️

[@BenBreard]

If you already have a 510 in a guitar, you can just buy the locking saddles and use those. Drop those in on your 510 and good to go!

[@baimun]

Was just about to type the same thing.

[@alexmilella]

I already made it 6 months ago

[@ChrisAlia123shredmadinsanity]

@@baimun Me too! LOL

[@134SASAKI]

And the 510 plate holes are oval. It may not be relevant for a lock saddle, but for mental health I am particular about it.

[@fusionid]

exactly what I did. Gotoh clearly makes better parts and hopefully they can come out with their own version of the locking saddles in the future so we can just get a 510 with them.

[@bdcorning]

I'm starting my first bass build but I'm watching all of the Warmoth videos. I really appreciate the information. Plus Aaron is great! I really dig his laid back style.

[@Stratamania]

Hi Aaron, Other options are Wilkinson WLS130/S Locking Steel Saddles which can retrofit the saddles on the Gotoh 510. In terms of the Wilkinson WVS1302P you have the WVS1302P Compact which is a modified version of the Standard WVS1302P Vibrato, and is designed to fit specifically on Charvel “Dinky” Style guitars with bridge recesses, and shorter body depth. I have Wilkinson WVS1302P standard and it has no problem in the Warmoth 510 body rout although you do need to use the studs as you mention in your video.

[@dougmackay_unklduid]

The compact is for Charvel's (etc.) with slightly recessed trems, thus the shorter depth. Wilkinson makes a non-compact version for non-recessed bodies

[@warmoth]

Ahh....good to know. I tried switching the block with the 510, but they were not interchangeable. Maybe I will try to order the longer block from Wilkinson.

[@SfordRog]

@@warmoth Would 1302 saddles retro fit to a 510 trem?

[@warmoth]

I think they are supposed to, but I haven't had a chance to try that yet.

[@takemebacktothen]

@@SfordRog I think that's what Pete Thorn did to his Suhr

[@mookyshoots1]

The saddles do fit the Gotoh 510 and they work fine on it. I had a Gotoh with these, so speaking from experience.

[@TommySG1]

You guys are actually building me a 1-piece ash body for the Schaller bridge. I had the same issue attempting to swap it with a fender 2 point trem. Spike hooked me up 🤙

[@JLindebergful]

Tom Morello could make that screechy sound work for him

[@anajaen4604]

@warmoth You guys are always making excellent videos. Thank you so much!

[@EricMakingWaves]

This was unbelievably helpful! I have a Gotoh 510 on my Charvel. Thankfully Wilkinison now lets you buy just the locking saddles which seem like a drop-in replacement.

[@frantisca]

Thanks Aaron for this upload. As usual, manufacturers are producing so many different standards that most are incompatible with one's stuff. The "sound of failure" is a real hit: someone should make a record with it...! 😆🎸😝😵 "The WVS1302P Compact is a modified version of our Standard WVS1302P Vibrato, and is designed to fit specifically on Charvel “Dinky” Style guitars with bridge recesses, and shorter body depth" Personally, I am into a vintage trip right now, and I am sticking to my old 6 screw traditional trem. 😁🙄

[@meytecc8601]

To this day, the VS100 is the coolest-looking bridge of them all.

[@Sunny_Bonez]

Trevs Locking saddles are amazing, had them in my strat for over 2 years now and they work just as well as a floyd system when used in conjunction with locking tuners too.

[@peterschaefer1665]

I was going to ask that question thank you

[@billweb]

That's my band's name! Thanks for this info - very important and useful.

[@jimmygrant3151]

Thanks Aaron. Great information.

[@mattwright6075]

Really great information. Appreciate it!

[@roryyerama5496]

I found out the hard way last year that the posts were not compatible but that was an easy fix as you said. I was able to get a Wilkinson 1302 with the full length block from their Reverb store last year so the rest of the install worked fine for me. If you contact Wilkinson on Reverb, (Trev's daughter runs the store) I bet she will send you a replacement (longer) block.

[@sterlingmcvay2469]

Ha ha ha !! Fabulous Sounds of Failure, Great Band Name!!! Great Sense of Humor. Man I Love the Colour of that Guitar!!!

[@warmoth]

LOL. That color is called Northern Lights Dye.

[@jameshalbert181]

I'd put a pickup under the springs and run it thru a ton of reverb.

[@RalphMercuroMusic]

The WVS1302P was a direct drop in for the Gotoh 510 on my Suhr. I took that same 510 and installed it in a Warmoth body with no issues...

[@ibalrog]

The finish on the back of that guitar is unreal.

[@thecentralscrutinizerr]

The Devil is in the details. I just had to order another Wilkensen Trem. I got the string spacing right, but the screw holes didn't match up to the predrilled vintage spec strat screw holes of 55.5 mm. The trem I got was 57 mm. Wilkensen does make one, so I had to order it. These are worth the aggravation, best trems you can buy.

[@HeathNicholson]

Excellent - good info to know

[@ricklowe8337]

Hi to Aaron, and all you guys following the videos that Warmoth produce for their superb products. Being part of the Wilkinson team I can clear up any confusion people may have regarding our anniversary vibrato range. In the range we currently have two vibrato units which are the; WVS130/2P Standard version. WVS130/2PC Compact version. Both units are 56mm across centres with a 10.8mm string spacing. The block on the Compact version is shorter and the top plate is also smaller, this is designed purely for Charvel model guitars that are routed around the vibrato on the front of the guitar, and are also routed at the rear so the plate is level with the body rear. In answer to the comment about Gotoh being are sole manufacturer this is not the case. The fact is that we utilise a small number of high quality bridge and component manufacturers to create our hardware, and like other leading guitar brands we have a selection of ranges at different price point to suit the individual customer. As noted by many of the comments, Wilkinson also produce a range of locking saddles that will fit many bridges/vibratos that are part of the Anniversary range, these are denoted; WLS130/S Standard versions which will fit many vibratos on the market. WLS130/P PRS style, designed to fit the PRS vibrato. WLS130/F Fender offset screw style, designed to fit the 2 pivot fender vibrato with offset intonation screws (right hand only) If anyone does have further questions then please feel free to contact me @ [e-mail]

[@warmoth]

Thanks for the clarification Rick....much appreciated! I have another bridge on the way, and will be doing a follow-up video once it arrives!

[@abrahamyanes2405]

I heard you guys hired the master painter Stephan That's awesome!

[@ricksigurdson2016]

Love Wilkinson products.. I have several guitars with his pups. My two favorites are ez lock tuners. And my Fret King Supermatic. Neither trem nor hardtail. It's a robot tuner with 6 preset tunings

[@maxmustardman298]

The unusual short specs of that bridge block aside, would you consider doing a video on essentially a little measuring course, on how to swap such bridges from one to another on the same body, like for instance those wilkinson bridges. There are so many details that should be regarded when upgrading a tremolo bridge, but few videos that explain which measurements should be done and how they should be done. I bet there are lots of viewers who want to educate themselves and dont necessarily shy away from using woodworking tools to accomplish such a task.

[@jerryodom1342]

Very cool looking guitar, love the humbuckers and maple neck and body colors. I think I would of had to made it without the pickguard because body looks that good.

[@VibhasPatil]

When you look at the price difference in doing this, it actually makes more sense to buy the 510 along with the mounting studs installed, and then simply buy the locking saddles separately. Installation is not that hard.

[@chris_2714]

Got to love when manufacturers change specs just enough to make parts incompatible 😄 Great video Aaron, I was wondering about the 510 and 1302 bridges.

[@ravecaster]

Bummed that you called dibs on that awesome band name.

[@JRFarmercom]

I bought the locking saddles (not the full bridge assembly) and installed them on a Callaham bridge (vintage 6-screw).

[@justinrayguitars6024]

I had a problem with the bigger studs on the VS100. Blew out one of the holes on a Squier Standard. Not enough meat there for the bigger stud.

[@ehiracheta]

Cool video!

[@jessenicholson1777]

It’s crazy that they changed the studs on this and you’re honestly better off with the 510 studs. The 1310 studs are obviously non-locking, which explains how they’re able to be smaller in diameter. Locking studs are a huge improvement for tuning stability.

[@faidon90125]

Awesome Tele on the wall!

[@DaemonGtr]

Is it's hole carved to move it both ways? Hope You'll do a video about how it plays. I'm planning my next Regal with semi recessed Wilkinson tremolo with locking tuners of course. But I'm not sure about the nut material.

[@9642SM7¹]

I hope that someone sends this over to Wilkinson. Can we get the Evertune route in your guitars?

[@curtdupriez3775]

Great video. Next up, tuning machine pitfalls and compatibilities (I hope).

[@windsurfmaui8239]

Aaron thanks for the info on the Wilkinson 1302. For the uninitiated like me will the 1302 fit in the Fender American standard route? I'm not talking about the block depth but just the overall route and the post spacing? Thanks

[@anthonysclafani3963]

+Warmoth Guitar Products how do I decide if I should get the Gotoh trem or the Wilkinson trem? Pros and cons of both?

[@ChrisAlia123shredmadinsanity]

Hey there Aaron! Hope you're doing well buddy. Hey I just wanted to let you know Wilkinson makes locking saddles specifically to fit in the Gotoh 510. Matter of fact I just bought a set for the Warmoth build I am waiting on..

[@shoryuXE10]

with a block that short, would these be potentially compatible with mustang bodies? never been a fan of the fender dynamic vibrato, so this could be a nice alternative routing...

[@markbrown9216]

Does anyone know if I should get the compact or non-compact version for a Warmoth VIP body?

[@markstoneguitar]

Could you fit the wilkinson 1302 saddles on to the gotoh 510 bridge plate??? I like the saddles being able to lock the strings and I have a guitar with the stock 510 bridge.... Let me know if you can please.... As always, thank you for great content! Cheers!

[@DrDuga]

I just ordered my first Warmoth body and neck the other day. If this build goes well I’ll definitely buy another body and neck. Can you possibly do a top mount Floyd Rose video? I really want a Floyd Rose in one of my guitars, but I don’t want to deal with a floating bridge. Thanks 😊

[@josefeld7164]

You can always use an L shaped backstop like the one from Fu Tone or Floyd Rose, improves tone as well. Works on both recessed and non-recessed mounts.

[@jedione1904]

Sorry...didn't pay attn to the vid... Too busy looking at that friggin awesome tee! Keep on rockin'.

[@TheTrlabrla]

Well, I hope that You will make another video like this, but without the FAIL word in the title! A lot of us are very interested in that bridge as far as the tuning stability and sound goes! Pretty please!

[@warmoth]

I'm in the process of obtaining a new 1302 with the standard trem block. If/when it arrives I will do a followup.

[@josemartinez-ul6gh]

How tall is that trem block that you got in there?

[@dt9r]

Thank you for using metric indications

[@sylvinong4576]

Dear Aaron, can you make a video on Gecko Basses. would like to know the differences between the different sizes.

[@customestrato17]

Hello, can you also use a tremolo with 6 screws?

[@venuputhankattil9487]

I made a decision to avoid locking trems but this video has sealed the fate for any kind of trems for me. It's hard tail all the way for me from now on.

[@warmoth]

Hardtails are much less hassle all around, for sure.

[@micheldenostredame5521]

Can i use Vaseline gel? 7:39 for prevent cranking sound?😁

[@RockCoversMusic]

Nice!

[@scanlinespectre]

Y’all should really consider doing custom routs for the Vega Trim. It’s the best Floyd alternative out there.

[@fusionid]

it is supposed to fit into a standard strat rout. Nothing custom about it.

[@scanlinespectre]

@@fusionid it fits it, but there’s a noticeable gap on the back end. It’s totally possible to make a custom rout that eliminates that gap and makes it look more natural.

[@juleknocen9438]

Can you make a video about semi recessed Wilkinson tremolo. I can’t cope with my curiosity!

[@Unchainedmaple888]

Just wondering, will a Wilkinson VS100 fit into the Gotoh 510 routing? I have a Schecter Nick Johnston strat with a Schecter import Gotoh 510 style tremolo but I'd like to replace it with a VS100.

[@warmoth]

Maybe. The VS100 has a blade edge on one side (rather than a "divot"), so it's not quite as picky about stud spacing. If you try it, let us know how it goes.

[@MercutioUK2006]

Are they even possible to source? I think Trev might have a slight case of "demand outstripping supply". Edit: Yes, the Compact (P) versions are available, not the other style.

[@devilgabo]

I love you dude, i just do!!

[@OperationEndGame]

What about the original non-locking floyd? Would that work?… Btw, i love the look of that guitar.

[@tomscioscia9869]

So, the American Standard Fender route won't work either?

[@kemperspace]

I need to know that color combo on that body and headstock! I would LOVE to order that bad boy in a HH configuration with a hard tail!

[@warmoth]

It's called Northern Lights Dye. More pics here: www.pinterest.com/warmothguitars/warmoth-wood/

[@Mark70609]

That’s great, but I’m still waiting to see if copper (or other material) shielding in a Strat style guitar. I live for the day.

[@charlief.]

A very informative video. Thank you. The post slots on the 1302 appear smaller than those on the 510. Were you able to fit the 1302 into the 510 posts without issue, or did you have to widen the slots?

[@warmoth]

The slots fit without issue. The only issue was the depth of the block.

[@charlief.]

@@warmoth Awesome. Thanks for the info.

[@rvburbank1]

Will the block from the 510 swap to the 1302? Pretty sure Gotoh owns Wilkinson

[@kesamek8537]

Hi can you do the 'new' Gotoh 510 'narrow spacing left handed' they sell it now, I've been hassling them for 8 years about it XD finally it's an option, just checking if you can supply or route for it thanks! The narrow spacing is good for preventing strings falling off the fingerboard sides since Warmoth necks are not so wide at the pocket.

[@tadashi_intuition]

I replaced the bridge from my Fender strat to Gotoh NS510 which is "narrow spacing" type, and I'm so happy with the result! 510 and NS510 are compatible. I hope Warmoth will be able to sell it.

[@Tatted-ne7tu]

How would I get one of these in place of my Floyd Rose, I hate it.

[@OEMPlus]

this is exactly why if i ever get a body from you guys i'll just pay you for the bridge at the same time :D

[@Jessesalvo]

Sick shirt too

[@kcee023]

question is, where can you buy the 1302 tremolo? don't seem to find them anywhere

[@sonnyfabia]

Directly from Wilkinson website.. it's now called WVS130-2P (Standard). 2PC is (Compact) with shorter block.

[@jameshalbert181]

Knowledgeable reps that step up at the time of ordering to help us navigate thru all these compatibility issues would give me a ton of confidence as a customer. Does anyone at Warmoth look for this before ordered are run when different parts are ordered at the same time?

[@warmoth]

We look for obvious compatibility issues and advise where we can. However, there is a near--infinite number of parts and manufacturers out there, with specs and dimensions constantly changing, new products coming to market, others being discontinued, etc., so it's impossible for anyone to keep track of it all. It's also really impossible for us to know how each person intends to use our parts, so the ultimate responsibility for compatibility lies with the end user. If you watch both videos in this 1302 test you can see how much work went into figuring out the compatibility of one bridge....which we don't even sell!

[@rentonharper673]

This video is great and all but AWESOME STAR WARS T-SHIRT!!! :D

[@warmoth]

Thanks! 😁

[@Heavenreck]

Aaron love your star wars t shirt where is that from?

[@warmoth]

Honestly, no idea. I just wear whatever my wife tells me to wear. :)

[@carvinblack]

I didn't like the VS100. The black saddle screws Allen key head warped very easily. I had to end up using two different wrenches to adjust them.

[@kostisk8914]

VS100N is shown as 28.4x2 = 56.8mm on gotoh's site. I believe they are showing how far you can go with the stud centers; not sure tbh but the right stud is not in the center of the marking. Either specs have changed or you are putting your studs too narrow and not landing them in a more general spot as you said the stud spacing Warmoth uses is 54.5mm. Not sure where you are getting that from. From gotoh's dwg I'd guess you are landing your studs in the center of the markings, but that's not what they are showing on the dwg. Great vid though, appreciate the shorter block info you highlighted!

[@nickv.7181]

The 1302 comes with different block height options. I believe they are 34mm, 37mm, and 42mm.

[@sterlingmcvay2469]

Also, have you Guys done a Blade runner SUPERVEE INSTALL..? I'd be Very Interested in that..?

[@jefflevy3557]

I've done that in a 6-screw (vintage-spaced) Warmoth body. Fits great! It's a forgiving bridge design and would also fit in a narrow spaced MIM body. Trem action is a bit stiff, though, but it's stable and sounds great.

[@popsfereal]

The compact doesn't have the gun boat saddles.

[@Furtheronmusic]

I think the compact is referring to thinner bodies where you need the lower block

[@warmoth]

I think you are right.

[@TomTheWise_]

are the blocks interchangeable too?

[@warmoth]

No, they are not. The screw hole locations are slightly different.

[@robsimmonds7685]

I know no one in their right mind would buy a bridge and then not use its included base plate, but couldn't you have just changed the saddles out (leaving the existing base plate and block) in order to try out the new locking saddles?

[@pjstamm2112]

Interesting topic, and nice shirt change ;)

[@OutstandingBill1]

Lol, yeah, when he said "I'll be back in a moment" I thought "he's going to be in a different t-shirt".

[@warmoth]

Haha....there used to be a time when I would try to dress the same on shoot days for continuity. These days I'm like...ain't nobody got time for that.

[@likovo1]

The "Compact" model has a shorter block, so If you have the standard WVS130-2P, the Gotoh route should be fine.

[@abrahamyanes2405]

If I order a guitar from you: can I request that your master painter Stephen put thier autograph on the back of the head stock?

[@ilov3th3sp33done]

is that tele inthe back a baritone?

[@warmoth]

Yep. More about it here: kzbin.info/www/bejne/ZoHZhoCGppqjmtU

[@ilov3th3sp33done]

@@warmoth thank you

[@christianboddum8783]

I find the locking screws are a bad design. The rounded head makes it necessary to use a too small Allen key, so they will wear out quick and be a pain. If they had used square shoulders on the heads, they could have used a larger diameter Allen key that is more common, have a deeper hole and longer lifespan. I hope the screws will get an update in the future, or someone will release a retrofit screw ;-)

[@warmoth]

Even though I was not able to play-test the 1302 in the video, I at least got to string it up, and had similar concerns as you do.

[@jeffmazzei8520]

I have this tremolo on my Suhr And no problem

[@andresilva8444]

Maybe the “compact” refers to short block and not small baseplate.

[@warmoth]

Could be. I will have to check with them. I tried switching the block with the 510, but they were not interchangeable unfortunately.

[@andresilva8444]

@@warmoth I struggled to find any info online on it. It’s very strange. Thanks for doing this.

[@warmoth]

As did I. I spent the $300 so you wouldn't have to! :)

[@burresseffects]

Boutique? Oui. Beauxtique? Non. ❤️

[@WarriorOfGhengisKhan]

Unfortunately you used the Wilkinson specifically made for Charvel guitars. The regular version is a perfect swap for the 510 and will not give you any trouble.

[@noel3422]

Ha ha, the vs100 used to be made out of pot metal, had it tested, wonder if they still are.

[@AarPlays]

Ah, ye old screen door springs. It's fine, distortion fixes everything.

[@Steinstra-vj7wl]

...why didn't you just swap the saddles on the Gotoh 510 that was on your guitar? Easy fix. Trev Wilkinson has a great relationship with the folks at Gotoh..SO WHY DIDN'T HE JUST PUT HIS LOCKING SADDLES ON A GOTH 510 TREMOLO - SO WE WOULD'T HAVE THESE PROBLEMS ???

[@kilhattrick]

7:50 I am reminded of when the levee breaks.

[@kilhattrick]

Or was it I'm Gonna Leave You Babe? I don't listen to Chicago enough.

[@JohnL2112]

I ended up having to just geeeeeeently Dremel out a little bit of my strat trem route.

[@JohnL2112]

Based on the video - I mean for clearance for the bar, I have the non-compact trem block.

[@geezberry8889]

you can buy a Gotoh 510 and the WLS130 saddles for less that what they sell the this trem for

[@lonepoorboymusic4365]

Why doesn't Warmoth just add that specific rout?

[@warmoth]

As I mentioned in the video, Wilkinson is offering this bridge with at least two different plates and two different blocks. Which one should we do the R&D for? Is this design "settled" now, or will there be further changes? Is there enough demand to justify the R&D cost? Is it even worth it if the 510 rout already works? Things we ponder.

[@lonepoorboymusic4365]

@@warmoth Got it. Thanks.

[@JohnoO_O_]

What a t shirt 😲

[@An2oine]

They don't make a 9 mm drill bit.

[@jeddak]

smaller base plate, smaller block, shorter and narrower studs....hmmmm..seems like the only advantage to the 1302 is the massive saddles....