Will Coupe Floors Fit In A Wagon?? Complete Floor Pan Install.

Use code SLEEPERDUDE50 to get 50% off your first Factor box at bit.ly/3uYa4lo!
Anyone who has owned a classic station wagon knows that it's usually very hard to find any parts available for them. That is the case with our 64 Ford Galaxie Country Sedan, and that is why we are going to find out today if a new complete floor plan from AUTOKRAFTERS for a 2 door coupe will fit in a wagon. This is a project that I have been putting off for a long time because of the amount of work involved, but I am going to show you every step of the process so that you can do it yourself.
You can buy the same floor pan at autokrafters.com
hydraulic clutch setup for the t5 swap was from americanpowert...
Merchandise available at thesleeperdude...
Become a boosted member to get behind the scenes updates and priority response to your comments / @sleeperdude
Check us out on
/ sleeperdude88
/ sleeperdude88
www.tiktok.com...
our 2nd channel @Sleeperdude2
our 3rd channel @sleeperdudearmed
Or Send Fan Mail to PO BOX 3411 Riceville Tn. 37370

[@Sleeperdude]

Use code SLEEPERDUDE50 to get 50% off your first Factor box at bit.ly/3uYa4lo!

[@darkrose4704]

I hate when you’re doing your Factor ad and a Utube ad breaks in and cuts it out! I really like those!

[@Sleeperdude]

@@darkrose4704 yeah that makes no sense why they would do that

[@2pikbone]

Good morning there sleeper dude! I'm watching your latest as I write this. I watched your Factor add and just a little helpful tip from a Long term and salty cook. I understand that you have to do and say what your sponsor tells you to, but if you can, it would look much better if you could take your meal out of the plastic box and put it on a plate. We eat first with our eyes. I understand that you probably don't do that when you actually eat at home, (I do but I'm trained to do stuff like that), but for the add, it would make a world of difference. Love your channel! Have a great day!

[@jonlennon3348]

One thing I would suggest is getting a derusting solution and soak all the hinges so you can see if the pins and bushings are worn out and may be get the doors sand blasted.

[@truthfilterforyoutube8218]

I saw "Puddin", having similar problems with his welder. He replaced the whole cord/tip assembly from where it makes connection to your welder , right up to your hand....fixed him up good !

[@br549200]

I’m 65 and still never miss a show. Used to do the same thing with cars years ago, just not up to it now so I enjoy seeing someone else doing it.

[@Sleeperdude]

Thank you we appreciate it

[@grahammcnally4799]

I'm only 52. I thought I was old and here I am just a kid in these parts. Love your family and all your antics. Thanks for bringing us along.

[@HansFormerlyTraffer]

I'm 71 and I don't miss a show. I used to do some of this...(mostly fabrication) a long time ago. I wish I would have had the tools they have now.

[@lonerglide]

Same here, 62 poor health, mechanic/ bodyman 4yrs, enjoy watchin family building car together ❤

[@clintrussell]

@@lonerglide Same only 65 can't do much anymore so I watch informative ,Funny, Wholesome shows like this!

[@markmoore236]

Nice to see a dad teaching their kids something and not yelling at them

[@Sleeperdude]

👍

[@stevenwalford6810]

​@@Sleeperdudecan we have an update on wawas driving permit situation/beetle (I've loved beetles since the original the love bug/herbie films and Re-watch her beetle videos regularly), keep up the good work

[@gordonwalker8003]

Two thumbs up on a father teaching a trade in automotive buy engine repairs and auto body .👍👍🇺🇸

[@williambearden8716]

This is the best family KZbin channel I've ever watched

[@Sleeperdude]

Thank you we appreciate it

[@williambearden8716]

@@Sleeperdude you're welcome

[@johnoneal1999]

Absolutely!!

[@6bettyboo9]

Ralphie is gonna be the next Chip Foose 😆 I just wanted to say how wonderful your family is, and doing this together will make a lifetime of memories. I never had a father, and seeing you with your wife and kids fill a hole in my heart ❤️

[@Sleeperdude]

Thank you so much!!

[@melindaivey4772]

WaWa is very detailed in her drawing. Very beautiful. Squeezy is eclectic and abstract is her painting 🎨🖌️. Very talented young ladies! So sweet and kind to others. I like the way Ralphie always promotes and supports Squeezy in her endeavors. I love the way they all play together and act crazy and just be siblings. You guys have awesome kids that are hardworking and very handy.

[@Sleeperdude]

Thank you so much 😀

[@henryhalter4765]

Completely agree!

[@truckabob]

Wa wa will get bent over and pregnant in the next 2 years. Squeeze will become a dope head and Ralph will be out in the barn stroking the goats.

[@dopeman420]

Yea why are we still going with fake names😂😂😂

[@muppetgump8522]

Suffering from a stroke on nov 16 th 2023 this is the one thing i look forward to seeing every Saturday

[@Sleeperdude]

Oh wow hate that for you! Glad we can help

[@joeismissing]

Prayers and best wishes !

[@darrylowens9298]

Hang in there

[@darrylowens9298]

Looking good ! Time for a little body work and paint. Tractor supply or my personal favorite rustolium. I’m thinking smoke grey on the top and sunset red everywhere else. Hard to beat !

[@blakeneysanders4264]

Puddings Fab Shop had the same problem with his welder a couple of weeks ago, turns out the liner in the cable was bad. He replaced the welding cable and solved the problem. Thanks for another awesome video.

[@Sleeperdude]

Good to know! Thank you

[@rupe53]

@@Sleeperdude you also need to disconnect all the wires to check a diode. If you don't, then you get a reading through the rest of the circuit. Diode check is with an ohm meter. Should flow in one direction and not in the other.

[@terrytye6497]

Ralphie is getting very good at a lot of things and I know you’re proud of him. He is a fine young man.

[@Sleeperdude]

For sure

[@jackwobser8283]

Can't beat a snowy Saturday and a new Sleeper Family video!

[@Sleeperdude]

Hope you enjoy 😉

[@QuantumTime-pc9ts]

A family that restores rusty cars together - stays together. I don’t know any family where the children are engaged in restoring old crusty cars and not deeply involved with video technology. Refreshing to see an entire family working together, what a blessing. I am very impressed with the bold and beautiful colors squeezy utilizes in her artwork. Who would have that building old cars would lead to building a beautiful family, May God Bless.

[@Sleeperdude]

Thank you so much

[@clevelandmaker386]

​@@Sleeperdudeyou could go to hobby lobby and Wally world and tha O'Reilly and do it yourself

[@ryancooper2826]

Can't say enough good things about this channel! Your kids are extraordinary and highly talented. It's good to see kids actually getting their hands dirty instead of staring at a screen. I've said it before, but I wish there were more channels like this on here.

[@Sleeperdude]

Thank you so much!

[@richardsmith-qy6vl]

Your kids are the best workers good parents make great kids

[@davidlawrence3887]

I'm 61 and I never miss a video!!! Huge fan. I have a 72 VW Beetle same colors as WAWA's!!!! Smart having WAWA in Factor Ad. WAWA is awesome. When will WAWA have her own KZbin channel? I love your family!!!

[@Sleeperdude]

Thank you

[@kevincorbin6273]

For sure it’s nice to see a father teaching his kids and letting them make mistakes and then encouraging them to keep going

[@jerryyoung807]

Ralphie is learning valuable skills from you Josh. I commend you & Tosh for keeping your children in church.

[@Sleeperdude]

Thank you

[@henryhalter4765]

Josh/Tosh, your kids are awesome! Y'all are such great parents. Ralphie is picking up skills so quickly and so well that it won't be long and you can turn him loose on his own projects. WaWa with her car skills, piano skills, artistic skills etc. Sweet Squeezy with her artistic skills and her competitive nature at just 10 or 11. And yall attend church regularly too!! Another great video. I always feel better after watching Y'all do things together and interact as a family. Even your animals are obviously close family...

[@larryswearingen8129]

A family with many talents

[@Sleeperdude]

Thank you

[@lancemorris6629]

Like I wasn’t a big Wawa fan!! Not only is she an ace mechanic, a musician and a great big sister, now she’s an artist! Your kids are all so talented. Our family wasn’t nearly as talented. The closest thing to greatness we achieved was my brother who graduated high school and it only took him 7 years

[@bugzeye]

I'm a 64 baby and in about the same shape as the wagon. If I could only train my wife to weld me back together. Love your guys' shows.

[@briantruck2284]

😂 swap part's & back to road

[@robertspray7472]

Just an idea, but how about getting the Squeezal some license plate blanks for custom artwork. She’d be able to market those pretty well at the merch spots. I know I’d love a squeezal custom Patrick Star plate for my beater truck.

[@brucecoleman6014]

The kids are amazing, they earn there allowance

[@HackeryX]

I love the fact that you are real and you engage with your subscribers thats why you are everyones favorite KZbinr keep up being real please. You realize that your subscribers are the reason you do what you do.

[@Sleeperdude]

Thank you so much

[@angrytrucker420]

My dad was very handy. Growing up I thought there wasn't anything he couldn't do. Problem was he was a drinker. Wasn't alot of times that you wanted to do things with him regardless of how much you loved him. Anyway, I commend you on involving your family on your projects. If not now , I know that in the future they will look back and cherish all of those moments. Thanks for sharing. ❤

[@Sleeperdude]

Thank you so much

[@BudFranks-fu9ye]

I love that wagon. Great job guys. Very proud to see Ralphy welding. Love to see all the family involved. Great kids🙏👍💯

[@Sleeperdude]

Thank you

[@offroad4x4nhlife45]

​@@SleeperdudeI must be odd to, cuz I LOVE wagons an 4 door cars. Perfect sleepers!!!

[@sallyb3]

For me, all the fun of your videos is seeing your kids working alongside you and learning.🎉🎉🎉🎉 I want a signed painting by Squeeziie🎉

[@Sleeperdude]

Awesome thanks

[@1STLAR2147]

Very nice work! Loving the team work going into these builds! Please tell WaWa to tie her hair back when working with things like power tools or engines that can grab it and cause serious injury. Would hate to hear about that happening! I’ve been an automotive technician for over 40 years. I’ve seen some pretty grotesque things in my career!

[@TerrySTUBSZlinski]

I was taught years ago when dealing with interior screws, mostly lower ones, you have to take a sharp pick and clean the head of the screw then tap screwdriver with a hammer into the screw to break off corrosion under screw. Then the screw comes out perfect almost every time.

[@Hobodeluxe960]

Ralph nailed the trapezoid. Dang Wa-wa you are a great sketch artist. Squeezy love your paintings. You guys have some talented kids, I know you're proud of them.

[@danobrien3109]

The skills you are teaching these children are invaluable. They will grow to be contributing adults and we will have you guys to thank for that. There are so many entitled young people in society that feel all they need to do is want and it will be provided. Your children are learning that you need to put in the work to receive the benefits. I could watch you and your family on a daily basis. Thank you for sharing your journey with us.👍👍🇨🇦

[@Sleeperdude]

Thank you so much we appreciate that

[@alexsprings87]

Good afternoon Sleeperdude and Family! My son and I have the flu right now, so this video is going to help pass the time! God bless yall!!

[@Sleeperdude]

Oh hate that for you guys hope your feeling better soon

[@mtrgv]

Right here is the real Brady Bunch/Partridge Family. Fantastic family involvement! I wish my Dad taught me how to weld. That's so cool you're teaching your kids how to use different body tools, and power tools. That was very fortunate that the coupe floor section fits the station wagon/sedan floor section! Smart idea/plan on widening the transmission tunnel/floor/toe board section. I would add a bolt in cross brace section to the one you had to cut off for the transmission tail shaft. That will tighten up that area of the floor pan and frame rails. Nice art work from Squeezee! Ralphie and WaWa did a great job stamping/drilling out the weld holes for the floor pan!

[@Sleeperdude]

Thank you 😊

[@scottblackwell157]

Glad to see ya'll!hope everybody is doing great!!

[@Sleeperdude]

Thank you

[@campervanmark3410]

I LOVE YOUR PIG TAILS WAWA THEY ROCK JUST LIKE YOU DO !

[@tregiz]

19 degrees outside. Inside: Homemade chili over a baked potato paired with the newest Sleeperdude Vid! Can’t ask for a better lazy Saturday! Keep up the great work!

[@Sleeperdude]

Awesome!!!

[@AndrewEdwards-t1j]

What a amazing family in a world of computer games and electronics its so great to see the sleeperdude children mucking in with dad on restoration of there cars and sqeezy and her art work instead of sitting all day playing on computer games

[@williambeahm2574]

Good afternoon everyone, I am nice and warm now with my big mug of coffee and sandwiches 🥪. Keep up the good work Ralphie, Wawa and Squeezy.

[@Sleeperdude]

Thank you 😊

[@gregorypierson5332]

I guess I will join the majority and say how great of a family you have and what a great father and teacher you are! Lol I am envious of your lifestyle.

[@Sleeperdude]

Wow, thank you!

[@charlesoliver5374]

In the first video I felt like the floor was pulled out from under me...but with this video you just "floored" me... this just shows that just about any car can be saved and brought back to life and reused. You don't have to put a lot of money in them either. You are not restoring them to "like new" but you are making them reusable. I like that your children are learning from you and your ability to do what you are doing.

[@gregorybarth930]

Mechanical knowledge transfer to many projects. Just knowing how things work. It's kinda lost in today's disposable world.

[@mtrgv]

I agree, Charles.

[@tedconroy5074]

I really love that you show your kids how to do something, then trust them to do the job. Please keep the long videos coming, better than any TV show on any channel.

[@Sleeperdude]

Thank you will do

[@stevelangston2359]

I’m 75 and I don’t miss one. Since I’m older, I watch em twice!!!!!

[@Sleeperdude]

Thank you

[@bentaylor9021]

I’m loving this ol girl. If the envelope will stretch, then this exterior with a top notch refreshed interior would be 👌🏻👌🏻❤

[@anthonymessina2834]

Ralphie needs to pull his sleeves up when he's working with the drill press. His sleeve was getting scary close to that spinning tool of death!!!! He is getting really good at welding, isn't he?!!!

[@Sleeperdude]

Yeah he does pretty good for a little guy

[@stevoschannel4127]

Agree, one slip around power tools can alter a life forever…

[@johnellis3309]

That came out beautiful. You'll have to cruise the East Coast with it when you get it finished.. start a new family tradition.. Wawa and ralphie . did a really good job.. squeezy art is going to make her a legend .. we're going to be eating Rocky burgers. If he keeps getting on that pinto😅.

[@2koolchris291]

It’s a slow day at work because nobody wants to drive to the restaurant during the terrible snowstorm up here. Roads are still extremely slick. Glad I live 2 minutes away, keep being awesome you guys. Look forward to every video

[@Sleeperdude]

Oh wow 😯 yes we have had some snow and ice as well

[@erinfredrisk9840]

This channel really is a breath of fresh air. The family (including animals) dynamic makes it so enjoyable to watch.

[@benjohnson1082]

Josh - I had a similar issue with my Lincoln that is around 25 years old and needed to replace the gun and cables. Solved my problem of the warm goo while trying to weld. I also found a gun/cable setup with a little more length.

[@claytonmerrill3985]

More common then not your mig gun liner is grounding out

[@garyrichards407]

I have a Lincoln welder that was doing the same thing and just changed the liner in the cable and fixed it.

[@jonathanmiddleton1141]

I’m not what I would ever refer to as an artist, but, when I do try to draw, I lean more towards the houses and nature scenes, that Wawa is doing such an awesome and amazing job at.

[@Sleeperdude]

Thank you

[@jonathanmiddleton1141]

@@Sleeperdude You’re very welcome!! I love Squeezy’s artwork too!!! They are both amazing artists!!! I’m so glad ya’ll are encouraging them to perfect their talents!!! Ralphy is really awesome too!! I like that he is learning multiple skills, along with Wawa and Squeezy at such a young age!! You two are awesome parents, doing an amazing job raising them young’uns!!!

[@rhondasweeney7271]

Could not live without SLEEPERDUDE FAMILY! Thank you for entertaining us! Thank you for sharing! 👍 😊

[@Sleeperdude]

Thanks for watching

[@Palarisha77]

At about 35:58 the fast forward that shows squeeze painting was so cool! Anyways, I really need to do floors in my 64 Ranchero and I dunno if this makes me want to do it more or less. My wife and kids are a little older than his, but they’re infinitely less helpful, lol!

[@Sleeperdude]

That’s funny I’m glad you liked it

[@leefipps]

I appreciate your editing and how long I know it actually takes you to do that 1 min intro montage. I know from my own small KZbin xhannel that 1 min of editing can take an hour. Thanks for always making it entertaining.

[@Sleeperdude]

Thank you so much really appreciate it

[@ronburnett9421]

My little Miller 145 has been serving me well for 16 years now, I used an older model when I was working in the body shop "no gas" because the guy I worked for was a grubass and wouldn't pay for the bottles,my welds weren't very pretty but they stuck. Now 16 years later my 145 has been out of gas for I don't know how long, I guess now I'm the "grubass" 😂 Miller welder is the best 😊

[@Sleeperdude]

Ok thanks

[@jonlennon3348]

I think it is wonderful that everyone gets involved. Josh you are a great teacher to these children so they can be proficient by themselves compared to Xbox zombies. I admire both you and your beautiful wife for spending so much time to teach and love these kids as much as possible. God Bless your Family.

[@Sleeperdude]

Thank you so much

[@LarryDeSilva64]

That was weird about that welder acting up like that. Diodes normally burn open but yours seems to be closed. You are bad Josh telling Tosh did you vacuum up that key in that glove compartment lol. You always need to have some fun to help the job. Looks like a great job on that floor pan. Thanks for the video. God bless you all.

[@shirleyisnard8354]

Go to the lumber yard and buy the lightest grade of peg board and form it yourself use for your head liner material. Works perfectly. 😊

[@70chevs]

Another option is the spray on truck bed liner and it adds a bit of insulation as well. They also make a version you can tint so you can match the interior some what.

[@Lisa-vq3ow]

I just got my original squeezie painting in the mail today. How did you guys know we love snoopy. I will be hanging this in my house tomorrow. This was a birthday present to myself. 😊❤

[@owensbama1923]

If i did alot of floor pans and sheet metal work i would invest in a nibbler. We use them in aviation sheet metal alot. Im sure you know about them though. Really enjoy your videos man.

[@davideyre]

Hey Josh and family, have to say I really enjoy your videos with the things you do, to bring these cars back to life. You and your family seem to be really good people.

[@Sleeperdude]

Thanks!

[@lowella598]

you all are the best! That's how I learned what I know from my dad and older brother. Priceless!

[@Sleeperdude]

Thank you

[@ricksalter3333]

Its so cool to see y'all doing everything together like a real family should be 😎👍

[@Sleeperdude]

I am blessed

[@bbay1977]

Great to see that Ralphie loves to weld. It's a great job career to get into to. Even pays good at the same time. The Local 72 will be happy to have him when he finishes school for sure.

[@Sleeperdude]

He really enjoys it for now.

[@greatPretender79]

Local 171 brother or sister!!

[@bbay1977]

@@greatPretender79 Good to see that you are subbed here. I'm not part or the Local 72, but wished i would have joined many years ago. I was in my 30's when I thought about starting and never did. I have family and friends that are with the Local 72 though. I should be a recruiter for them for sure 😆. Im always referring people to the Local 72 that are looking for a steady job and great income. 😆 i was getting paid peanuts for welding compared to what I would have made through the Local 72. Always great to see or come across other people though. Good to hear from you brother.

[@greatPretender79]

@bbay1977 we recently went on strike for 6 weeks. We got nothing, they basically broke us. We weren't in the news. To keep this short, good to hear from you too. We'll keep fighting. Mike from Mack

[@bbay1977]

@@greatPretender79 Sorry to hear that man. I have been living out here where im at for 5 years. No news what so ever. So if I dont get it from other people or see it on here, I know nothing about it. Yeah I believe the main stream media wouldn't post anything. Not on their agenda right now😪. Keep your head up Brother and it will work out. I'll have to look around to see if there are anyone covering it.

[@alanphillips556]

You guys work so well together...have you ever thought about getting ralph ready for nasca. I reckon that would suit him so well, with the family behind him, and what a film, the whole training building and prep. Youd sorted for atleast tge next 7 yrs. Great film as Always. Thanks toyall, god bless.❤

[@Sleeperdude]

Thank you! Yeah he would love it

[@Anders.W.]

The whole floor turned out very good . It is strange how different parts of the car have rusted up totality and other parts of are solid like new ? It was fun to watch this video . Great job !

[@Sleeperdude]

Thank you

[@michaelbabella9012]

hope Sleeperdude family stayed warm during the recent storms and cold snaps...dress up, stay warm, leep an eye on the extended family out in the pasture as well!

[@Sleeperdude]

For sure

[@RobinRobertson-gj6lx]

I love watching the videos of all of you. Your family is awesome and so much fun thank you so much for sharing with us.

[@Sleeperdude]

Thank you

[@StevenRobertsonTheOACS]

Plastic bathroom paneling makes great door panels if you want to cover them with fabric. They are also very easy to form with a heat gun pipe or tubing. If you want to go really stylish, use veneer-side paneling.

[@Sleeperdude]

Ok thanks

[@WNCworks]

I don't know why you don't like Miller welders...we used them at work welding brackets to axle housings, hundreds per day. I have a Handler 140 that's perfect for sheet metal, and a Miller suitcase style plasma cutter, and I've never had any issues. Good video, looking forward to the next one!

[@larryschreiner2485]

I'm only 48 and your channel and vgg are my 2 favorites! Yours for the wholesomeness and his for the comedy!

[@Sleeperdude]

Thank you

[@CarburetedIron]

Got that project headed in the right direction! Lookin good!

[@Sleeperdude]

I hope so thanks buddy

[@JosephRozum]

Good Evening Family , I am so glad to see you again today and I hope you are doing well and having a fantastic weekend Sir 😊 !

[@Sleeperdude]

Same to you!

[@saltynlit]

Sleeperdude family rules! Diggin' the wagon! Can't wait to see Ralphies new project.... May God keep blessin' y'all!

[@Sleeperdude]

Thank you

[@jonyeager318]

Out of all the Tuber's You guys are definitely my favorite! I wish You all the success and all the blessings to go with it. I share you guys with all my friends because You're a wonderful family and could be an inspiration for many to follow! God bless....

[@Sleeperdude]

Thank you so much!

[@dennysauls2117]

Finally got home time to watch sleeperdude and family. Alright

[@Sleeperdude]

Thank you

[@MrSpartanPaul]

I'm 59 and have 5 older cars and a 1990 boat. All have small block Chevys except for the 500 in the Fleetwood.

[@Sleeperdude]

Awesome thanks

[@mickeyj4228]

I would highly recommend the Primeweld Mig 180 as a primary or backup welder. It's half the price of my Everlast imig 200 and comes with an aluminum spool gun. I have the Primeweld Cut 60 plasma and can attest that Primeweld has the best customer service in the industry.

[@little_dark8593]

I'm 16 and a bit years old, from Germany and enjoying this to the fullest. So ya got sum young one's too😅

[@pamthomas2934]

That wagons gonna be so sweet when it’s finished. Love watching it come from a field to a new (older) Ford. So enjoyed the floors going in. Rocky seemed to be pleased with the floor as well😅 can hardly wait fir next step. Thanks & we all ❤❤ yun’s. Until next sending Blessings to you and your family 😊

[@Sleeperdude]

Thank you so much

[@HellsDamnedUK]

I'm 50 and also never miss a sleeperdude and family show great fun viewing and sick cars also wish we had them in the UK lol

[@NathansMoparGarage]

Looking good. I had to find some good used 4 door door panels for my wagon.

[@DroooooopDead]

I love watching yall working together. Your young ones have more knowledge about cars than a lot of older people.

[@Sleeperdude]

Thank you

[@naptime_builder]

Absolutely love the channel. My family of 4 is usually locked into the tv everytime we realize you dropped a video. Tyler(4) and abby(2) love the animals. Your channel was a huge inspiration to me starting my channel 6 months ago. Keep em coming!!

[@horacecope5324]

How this channel doesn't have a million subs is baffling!

[@Sleeperdude]

Maybe one day

[@deangraboskey2564]

My first car was a 63 Galaxie and when i re-did it i found some 64 Thunderbird bucket seats that fit very well. They were white so i used interior spray dye to make it red like the original interior so maybe if you happen to find those they would look really good in your 64.

[@Sleeperdude]

Ok thanks

[@ScottDLR]

Thats what I was thinking. I have a 64 T-bird and have noticed a lot of Fords of that era used those seats from the factory. Upholstery kits are readily available too. Modern seats just wouldn't be the same.

[@Roger-hq1yt]

The hole punch /flange tool is known as a Joggler here in the UK , great looking floors, definitely keep the 3 speed gear knob , dont let on its a 5 Speed.

[@CarolinaWheezer]

Great job Ralphi ,wished I had the opportunity at your age to weld on rigs don't even know how to weld myself lol. Keep up the good work all you guys .Enjoy every last video family that works together very unheard of now days love the videos keep up the great work you guy's. From NC 🇺🇸

[@kerzwhile]

Never thought Id say this but this was THE BEST "Factor" endorsement commercial video I have ever seen on all of KZbin! 😊

[@lindastabell6598]

Woohoo! I find myself looking forward to Saturdays I love the family videos so much. Prsyers everything works out and it fits. 🙏🙏🙏

[@Sleeperdude]

Yay! Thank you!

[@lindastabell6598]

You're welcome

[@timfeeley714-25]

Duplicolor And Rust-Oleum make fantastic vinyl and fabric paint for changing the color of seats.

[@pdrphil8159]

Love the wagon . Grew up in Ford & Chevy wagons.. My folks had a 60 chevy wagon when I came along ... Then 5 wagons followed.. Finally in 1979 my folks bought a new Chevy Suburban . It had a.c. & power windows . It was a welcome luxury with 7 people stuffed in it...

[@Sleeperdude]

So cool

[@mikebrown1600]

65 here always enjoy you your videos can't wait till the next one comes out

[@Sleeperdude]

Awesome thanks

[@johnpassmore8176]

As a car builder myself i must say . I get my dose of family time watching you guys having a great time. LOVE IT

[@DeadwagonGarage]

Use the copper weld through primer, and in the center of the areas where your plug welding, scrape a small area back to bare metal. I never have an issue doing it that way and perfect plug welds and fully protected. Hope this helps.

[@Sleeperdude]

Ok thanks

[@frizzellracing]

My Galaxie wagon with the 5 speed and 302 has a bench seat at the moment. You can get a shifter that has a “curve” in it and it will clear the seat

[@Sleeperdude]

Ok thanks

[@TnCountryBoy]

The floors will be great !!! Please be careful going to and fro between the house and shop. We have a hard Ice crust down south, bet you have even more.

[@Sleeperdude]

Yes!!!! We been froze up all week crazy. Our area isn’t prepared to handle this

[@armedinbama]

I put in my first Factor order this week. Also got my parents a gift subscription for Christmas. Used the code AND sent them an email thanking them for supporting your channel. 😁👍

[@Sleeperdude]

Wow thank you so much really appreciate it

[@henrymancini3750]

Please take care when grinding. Having worked in heavy industry, I've seen numerous people reporting to eye hospitals to get metal removed from their eyes followed by a lifetime of eye drops and eye specialists visits. Full face shields if you wear prescription glasses is what I used.

[@fastfingers1957]

You are SO right Henry👍, 10 years ago, I was grinding metal with a Dremel, and wearing just my eyeglasses like Josh does, and I had a tiny fragment get into one eye and made it almost impossible to close my eye and blink because it was so irritated...it missed my cornea by a hair. The eye doctor that pulled it out said I would have gone blind in that eye had it entered a millimeter more in that direction. I have been wanting to say what you just said to Josh for a while, but I didn't think he'd take me seriously...So I hope he does see your post (and mine!)

[@Sleeperdude]

Thank you

[@Buddys-garage]

Always look forward to your alls channel. Love the station wagon and what you all are doing to it! Keep up the great work and the great family togetherness.

[@Sleeperdude]

Thank you very much!

[@Buddys-garage]

@@Sleeperdude Ralphie, that shape of the cut out floor was a octosquare, come on bud 😂

[@davefrazier403]

Josh....I worked in upholstery shop....the make 4x8 sheets of abs....you can make headliner and panels from cardboard transfer to abs ......easy to cut

[@Sleeperdude]

Ok thanks

[@gumbomudderx7503]

That’s gonna be such a cool cruiser when y’all get it finished! The floors look great. I think I’d have to put a bench back in there. Theirs just something cool about a floor shifter with a bench seat

[@Sleeperdude]

Yeah maybe so thank you

[@jcnpresser]

I was gonna say the ground, it was sparking where the two floor meet looked like. I’ve never seen a nozzle get that bad lol. I usually clean as I go every couple welds though. Dang son !

[@Sleeperdude]

I know right

[@peterjuhlke7437]

You guys are fun to watch and I love how you all get involved . I've restored a few 63 and 64 Galaxie cars and wagons and still would like to do another but they are getting hard to find anymore . Kids are learning some great skills , and having fun too. God bless you guys .

[@Sleeperdude]

Thank you so much

[@johnhrynyk8521]

DEAD DODGE GARAGE 2WKS AGO SHOWED A 64 GALAXIE 500 THAT BELONGS TO AN ESTATE SALE. 390 BAD TIMING CHAIN I THINK BAD TRANS THAT HE DOES NOT HAVE TIME TO FIX. CK HIM OUT IF U WANT A PROJECT