WILL IT CHUG? - HARLEY BENTON TUBE15

[@OlaEnglund]

I'm a little out of focus today... BUT I FEEL FINE!

[@rejeancomeau77]

Listen a little bit at some Taylor Swift. You're gonna feel even better after man .🤘🥴🤘

[@C-Ro]

@@rejeancomeau77 Or Don Omar...

[@PooNinja]

I’m feeling a bit out of phase.

[@Obeythebeard]

Det är bara uppfriskande att höra dig svära lite en dag då man bara sovit fyra timmar i snitt per natt i en vecka (och man dessutom har råkat köpa ytterligare en gitarr för mycket man egentligen inte hade råd med)!

[@thomasbaldiscola4671]

Nice Harley Denton! I've been sick AF too. Feeling better today in time for my new 7 String Guitar tomorrow!

[@HarleyBentonOfficial]

Uff, Seems like you found the 4 dimension of our Tube15.😂

[@Elintasokas]

The amp actually sounded great by itself. I think I liked that lower gain tone more.

[@endoffate5475]

I agree, it has that spongy/crystal sound.

[@maxwellelliott7963]

@@endoffate5475 ahh yes spongy.... every guitarist can describe what that sounds like ;)

[@MickH60]

@@maxwellelliott7963 Guitar speak, always baffles my non guitar friends.....!

[@maxwellelliott7963]

@@MickH60 😂😂😂

[@brozio77]

me too i think so. prefer its own distortion even if is less gainy

[@CraigCrider]

I love that Chug is now a unit of measure. The equation is simple, X + Chug pedal = Chug

[@m.samsonite2810]

This segment has become pretty reliable. Thank you Ola for doing this for us.

[@peter333]

This amp rocks! I have been using it for almost a year now and it still amazes me. I have it hooked up with a Harley Benton 212 speaker cab with 2 x 12" Celestion V30, it sounds awesome, it's the ideal combination and it's really really affordable, a lot of bang for the buck. I have a bunch of different pedals in front of it and a handful through the FX loop. Most of the time I use 1 basic setting for the amp but I also like to play with settings, no matter what, this thing makes everything sound great, no kidding. Some people laugh when they first see me with a Gibson Flying V or Explorer and then find out what amp i am using, I think they are just snobs. F**k em and rock on!!

[@BXGuitars]

FYI if you're in the United States, Monoprice sells an IDENTICAL amp. Same manufacuter. While I can't confirm their guitars are built by the same company, Harley Benton and Monoprice (Stage Right brand name) are 100% identical except for obvious voltage for it's specified country.

[@N8TheGr8M8]

I thought it looked similar

[@dunnigan66]

Got one love it!!!!

[@user-lv7ph7hs7l]

And both are a Laney Cub 15, but spring reverb instead of digital, different case and cheaper speaker. So it's a 400-500€ amp + MIC Celestion. They make a head now, not as good a deal but still 200€ and I can lug it around and mooch cabs.

[@thetrooper2152]

Seems like a darn good Amp for what it is. Would've liked to see an OD in front before you went to the chug pedal

[@reallyeffingcooltechnodude]

Felt like an ad for the pedal.

[@biyul3976]

ye its like ALMOST there just a lil clean boost and i bet it would have sounded great

[@Anaximanderification]

I use this amp for a year, some OD pedals work best, something with internal voltage headroom will sound great, something like the 18volt OCD or the TC electronic mojomojo (it increases internal voltage past 12 o clock volumeL. TS808 is hit or miss based on pickups. This amp excels on P90s.

[@andrewc9762]

I have this amp with a Maxon OD in front. Its really all you need!

[@RapttorX]

well he dosent sell an OD pedal yet...

[@ryanhass8716]

Man, I think it often goes without saying, but Ola is a really good guitar player -- those riffs he pulls out are savage!

[@MrIWILLEATYOU]

Man my 10w beginner amp has been given a new lease of life since my Chug arrived. Sounds so good when paired with a crappy amp!

[@Mtaalas]

For a tiny practice amp, it pulls it's weight very well it seems... maybe not the earth shattering chug, but certainly very usable!

[@jeremymiller6933]

So glad someone finally tried to chug with this amp and put the results out there. Thanks!

[@bruyere7]

HB is constantly impressing me with their price to performance

[@HashiAkitaPuppy]

It's just a rebranded Chinese Monoprice amp.

[@bruyere7]

@@HashiAkitaPuppy i was namely speaking on tbe brand as a whole rather than this singular product

[@apocalypse4720]

@@HashiAkitaPuppy You're right, only difference is the power cable.

[@IkeHowell]

imagine a solar tube amp. now that would be sick.

[@hannibalbarkas1350]

Based on the Satan but affordable

[@DAJUggaN4uT]

So a Randall Satan.

[@etforde]

Sound like a Krank amp would be cool. A friend of mine bought it when we were young and it was brutal compared to my Marshall DSL stack with a tube screamer 🙌

[@e-henne]

@@etforde I have my Rev Jr 50W Pro I bought new in 2013 and an original Krankenstein. They are both super tight and crystal clear even when they gain is turned up. They always sounded like they had a higher "quality" of tone compared to EVH, Peavey, Marshall, Orange, etc amps I've played. I will NEVER get rid of them!

[@IkeHowell]

@@DAJUggaN4uT yeah but more simple to dial in and less money. they could definitely make it happen being that they just released a pedal

[@tomfenton1506]

Literally revolve around these videos, so so good.

[@VanOpstalK]

Mine arrived today. Love this little tube amp, especially for the price. Well done Harley Benton Thomann !

[@cam0767]

Ola has created his own Harley Denton guitar

[@gratefulseedsavernogmo5172]

Great sounding 15 watt amp!!! I’m DEFINITELY going to pick one up. I’ve listened to A LOT of smaller amps but, none have sounded as good as that Harley Benton, for me. Thanks for the review! For that dent that your chug box made in the guitar’s body…Take a damp washrag put it over the dent that’s in the wood and take a clothes iron on medium setting place it on the rag over the dent for 10-15 seconds it will swell in the dent. Nitrocellulose lacquer is breathable but be careful not to heat the finish up too much or you can pop it off. Positive Vibrations…

[@merockunot]

These are actually Monoprice Stage Right amps just re branded as Harley Benton...Had mine over a year and it rocks..was only about 250 bucks , well worth it.

[@nicholasdasilva5699]

Yeah, isn't this one the Laney Cub clone?

[@steveschulz3647]

@@nicholasdasilva5699 yes. I’ve had one for three plus years, they’re great with a better speaker.

[@randymiles904]

For what it is, it's not bad at all. I don't know about chuggability, but the tones ain't bad. Nice one Ola! 🤘

[@Jaxty1]

I have this amp. While I'm not in a band that needs it to chug, this thing rocks.

[@topsnek9384]

I hate when people say not enough to play a live show, like youre not gonna mic it up. You could play a travel battery amp and mic it close and be able to mix it but thats just me I've actually been waiting for this specific review lol great video!

[@obsidiancrow450]

not really. you're at the mercy of the PA at the venue. Most people play tiny venues without that much PA equipment and if you show up with a tiny travel amp you're not going to be able to hear yourself over the drummer 1. 2 you're going to sound really really quiet which if you're playing metal, punk, any other extreme genre is really bad.

[@greasemonkey568]

The pre amp is basically a JCM800 clone (the amp itself is a Laney Cub clone...er, actual Cub from same factory in different enclosure). Hence, an SD-1 into the front, with gain up on amp, is, well, the 80's style chug. I have the Monoprice version. It gets 90% of my practice minutes. (over a Mesa and JC SLO clone)

[@GudeDoc]

Cool! That weekend i was at Thomann in germany/Treppendorf and in the Amp Room they have everything but i did not see any Harley Benton amps .

[@Bernz66]

I used to go out there in the mid to late 90’s…… man has Thomann’s grown!!!!

[@GudeDoc]

@@Bernz66 Yeah you can spend the whole day there it is amazing. I played Jump on the Oberheim OB-X8 but they want to have 6000 EUR for this O_o.

[@GudeDoc]

@@Bernz66 And of course i had played some sOlaR Guitars ^^

[@Bernz66]

@@GudeDoc nice!!!!

[@DavidSmith-xz4zz]

Thinking about getting the American version. You absolutely can gig live with it. If you need more volume, either hook it up to an extension cab or mic it, or both. For under 300 US I don't think there are better options. Yeah, some lunchbox heads may be better, but you'll also have the added expense of a cab. Just my 2 cents.

[@cfhsxtd]

Ola, thank you for all your videos, and especially for this review! I use this inexpensive tube combo amplifier at home. There were skeptical doubts and unfriendly reproaches of envious people. But you opened my eyes! I especially liked it. Your miracle pedal! The combo opens. I'm from Russia, politics has nothing to do with it. I respect your channel, and I am looking forward to new shows with pleasure, so that I can press the little bell and finger _ only up.(Sorry for the translation. At school, I learned a foreign language (English) only on 3 out of 5.)

[@ctcards2636]

OK I own the Monoprice version of this amp and here are a few things i did to mine (to make it chug) Install shielding tape inside cab where amp chassis goes. $3 Replace reverb cables with shielded $3 Adjust the bias (test point 10.5v) stock its around 7.5v going by test point. $0 Replace reverb pan with 3 spring MOD pan $25 Installed 6p14p-ev power tubes ($40) 6n2p preamp tubes in V1 and V2 (using 6n2 to 12ax7 adaptor) $25 RCA 12at7 in V3 $15 Replace stock speaker with Electro Harmonix 12ts8 $35 After doing this ive found the amp to be quite nice. But stock the amp was a mixed bag. Theres def not much headroom on this amp, theres a way of changing whats going on with the input to get some more clean headroom. With a TS9 and my Les Paul i can nail some crazy nice leads. You can hear the JCM800. You have to remember this amp is based on a Laney Cub 12 and that amp is based on the Marshall 2203 or 04. This just uses EL84 output tubes. I would def recommend trying out both 6n2p preamp tubes and 6p14p power tubes. They put to shame the current production tubes and dont cost an arm and a leg. The reverb circuit is never gonna be amazing in this amp, but the MOD reverb tank def helped. Also the terrible rca wires for the reverb were very prone to picking up noises. Also if your amp seems noisy, there is a hum pot inside the amp that may need to be adjusted. The stock speaker is garbage (i dont care what name is on it). I replaced mine with a Electro Harmonix speaker built by Eminence. These are killer speakers for jack shit cost. There was a NIGHT and day difference with the 2 speakers. I allowed time for both speakers to wear in a bit. 20 hours is my usual before deciding which. The 70/80 does everything but nothing at the same time. For $35 shipped the EHX 12ts8 speaker made this amp sing. Make sure your amp is biases correctly. These come biased at 7.5v and this amp needs to be at more along the lines of 10.5v or so. If your expecting this amp to do Fender tones, not really gonna happen. Unless you get what a few people have gotten and I bought just for this amp. Joyo American pedal. Its like a blackface/tweed preamp in a pedal. This added that Fender tone i think a lot of people were missing. This pedal can be used in the fx loop or in front. But i just wanted to make sure i passed that on to folks as a cheap option to possibly get that tone you were not getting. There are better pedals that do this thing, but you can find one of these for $25 on a good day. Hope i could be helpful and thanks for the video :-)

[@bclikesyou]

Any tutorial for that first mod and does it prevent damage or something? I have the same amp and trying to make it last!

[@skipjacket]

That amp is identical to the monoprice 15 watt amp. Great little practice amps.

[@gravity4fun364]

Didn't change much, looks like it's really the volume that will put it to chug hehe

[@SuicidalGrind]

They still do sell the cabs with celestions as well! I think it's a great thing that they're doing because their amps are a big steal.

[@gamjammallota78]

You never had the volume past 1/3. The reason it was not loud in the effects loop was because you at no point ever had the volume past 1/3 up. The preamp[gain] control is bypassed in the loop because it is designed mainly for time based effects. If you would have turned the volume up all the way, it would have worked better. You did not operate the amp properly. The 1st knob is gain[pre-amp]. The 2nd knob is volume[power-amp] You could have gotten a lot more chug out of that amp.

[@diabeetus7132]

That noise at 6:46 levelled me. Every time we have too many cables and such 😆 🤣 😂

[@DoubleBarrelDarrell]

Chug pedal will make any amp sound like it chugs. Such a badass pedal!! Thinking about getting another one.

[@archiiebarrett]

Use the effects loop for modulations like Delays and Chrous, but plug your stomp boxes and fuzz right into your main chain.

[@elnyoutube123]

The speaker being pushed combined with that pedal had me head banging like crazy. Easily one of the heaviest nastiest tones I've heard on this series.

[@themplar]

Harley Benton very often pleasantly suprises. This amp is recieved very positive. And no doubt tons better then my standard 40watt HB practice amp. I love their guitars too. For learning so i can at some point justify getting an awesome Solar.

[@GonJilman]

Damn that HB sounds better than my Bugera V22 with a metal muff in the front of it. Curious to hear how it sounds with just and overdrive in front. I know my DSL20 combo with a tube screamer mini in the front really fucking rips. Awesome demo as always Ola.

[@krogwaugh]

I would highly recommend going to something different than a metal muff.

[@crazyfilin77]

Bugera good pedal platform,and it sound great)

[@jamesmaloney8191]

As soon as you turned up the volume with that pedal engaged my ears immediately perked up. That sounded killer. 🤘🤘🤘

[@gstrang4208]

I ordered one of these a couple months ago, and for the money ($400 CAD shipped) this thing is an absolute monster. Even on 1W, bedroom volume cant even get to THREE without blowing the roommates out. i think you could definitely jam/ rehearse with drums on this thing easily. i used to play on a 110W behringer modeling amp, and the HB is 10x louder. All tube baby! not to mention, hooking it up to my peddle board takes it to a whole nutha level. the ONLY heavy caveat is you need to buy a voltage converter to operate it in north America (120V-240V) they're about $60

[@oliviergagnon2592]

I have one like this. I added an LPad attenuator I made myself and now it rocks at bedroom sound level. Awesome amp.

[@literalghost929]

Boosting the volume might have made it (at least closer to) chug!

[@robzilla69]

Right! Since the "chug meter" is actually a volume meter.

[@christiangreaves3911]

I have one and it’s great. The reverb should be upgraded. It’s just not as wet as it should be. Other than that it’s a beast for a practice amp. If your playing a garage show it’s plenty loud. Great home amp. I found that it delivered enough metal to play anything thrash but when I added pedals it really gets nasty while still maintaining clarity.

[@CinemaPuree]

Looove the CHUG videos! Would love to see one on the Mesa Badlander 25 combo! Thanks Ola!

[@CinemaPuree]

On second thought, I'm sure it chugs haha, but would still love to see some kind of demo of it!

[@MrLex87]

Oh My! That metal sound is so clean and badass this amp is super impressive af

[@FateGathersStudios]

I've been on the edge of buying one of these.. You just finalized my mind, I'm getting one..

[@johnstrat13]

Monoprice did this first! Actually a good amp once you switch out the tubes

[@DammitCartman]

What more could you ask for at that price point? Im kind of impressed honestly

[@cowork2010]

I'm pleasantly surprised this amp sounds really freaking good. I've seen a few others talk about this being a cheap way into a tube amp. I may have to get one now.

[@stoicscorpio3838]

"B STOCK," omg I was HOWLING with laughter!!! 🤘😂🎸🔊

[@retrocny5625]

Sounds like it'll get there with a boost, whether it's a simple tubescreamer/SD-1 or something like a precision drive. Might not get super saturated for creamy lead tones but it'd be tight enough for any kind of modern metal rhythm with the volume cranked wide open. Even more so if you're using active pickups or a really hot passive. Pretty neat little package.

[@DavidSeeley-gd9wc]

That amp has been made by Monoprice and sold as a Stage Right amp for several years. I have one I have played rthe shit out of for thw past 2 yrs without a single problem. I get chug out of mine with 6 or 7 gain and 5 or 6 volume and everything else about noon. Seems like once the volume get to 5 or 6 it really awakens the beast in them. Mine was loaded with JJs and the 70/80 celestion and sounds really good and excepts pedals well. I have to travel 400 miles to work and its perfect for a in the middle of no-where and if it got stolen I would be out a lot of money. I really like the one I have. It is supposedly a Laney Cub board and electronics. I have a music room with several up to 75W amps but end up playing the Monoprice/bentley way more than the others. It has been very dependable and I crank it to metal and chug for hours at a time. Seems like any decent overdrive will get it chuggin and lower volume and gain settings. Anyways, thanks for the great review on the more affordable items. Sure makes me feel better on my purchase. Keep on Chuggin David

[@stapeld]

The amp is a rebadged Laney Cub 12 with spring reverb instead of digital reverb. It’s legit AND it has a speaker out if you want to drive a cabinet.

[@user-ml3sz3mm5y]

Idk about the amp being unable to handle a rehearsal or a live gig - I've tried it, and while we're mostly playing rock and not metal, it was loud as fuck, kept up with the drummer without any problems and the volume was set to maybe 70%. Doubly so if you'd plug it into a 4x12 which just happened to stand there, haha. Also, we played a wedding gig, I miked it to beef the sound up a bit, but loudness-wise it had plenty of power.

[@AdamBurseMusic]

Great work Ola, that was an awesome demo man and it's great for what it is 😀🤘🎵🔥🔥🔥🔥🔥

[@flyingwondercat739]

Personally I've got enough amps, but checked the pre-shipping price on the HB Tube 15 and it looks pretty affordable! If you're looking for a first/second amp this is a good option to consider :)

[@al3ssi0._6]

this is pretty cool! could you make one abt the harley benton 4x12 with the v30s?

[@ChiAeNima]

Next demo maybe you can try to boost the saturation of the amp with an overdrive pedal. Maybe.

[@louaguado995]

It's based on a Vox AC15, a Vox doesn't chug either 😏 I have one, it's good for recording, and I like that it has an extension cabinet output, although it mutes the internal speaker when you use it. Try it into a 212 or 412 cabinet for more bass response. Also, you never turned the master over 3. You need to get both the preamp and the power amp tubes cooking to get the speaker moving for some real "chug"

[@RoccoGucci]

I would have liked to hear the amp after it was warmed up, with the pre and post cranked.

[@kylemiska8353]

Fuzz bender. Will it chug?

[@RileysDadRocks1]

Damn. This amp may not chug but it's clean AF even at max gain and volume...nice!

[@sabinonguitar5146]

The last one goddd! I didnt expected that sound

[@DavidRamos-nz4bh]

Looks like a perfect jazz guitar amp!

[@colinchristensen6603]

I thought it was chugging with the gain maxed, nice thick tone too.

[@Saul_HUDSON]

For the price this amp is very good : spring reverb (you can use it with a footswitch), all tubes, an effects loop, and a Celestion 80 ! One regret: I would have liked to hear the amp in the Mesa Cab !!! This Celestion 80 speaker is not the best... Thanks Ola for this video !

[@doyzmusic9604]

I love your "Will It Chug" videos man🤘🤘 I'm your big fan from Philippines

[@rowlandstraylight]

I think this a Laney LC15/cub clone like the monoprice. The preamp side is the high gain side of a JCM800 but it's got much smaller power tubes and transformers. I'm using a cub head with a 1x12 or 2x12 and it's louder than any drummer. The tone operates across the output transformer on the cub, it's really useful if you use the amp as a pedal platform into the fx loop or use a loop switcher to go from preamp to external pedal in the fx loop for channel switching. I use it mostly as a fast dial for getting close to right when swapping between speaker cabs on on my cub head.

[@Jumpinzackflash0398]

Amp seems like a great pedal/mod platform. I’d love to see a pt2 with a speaker swap with a better celestion in there, like a greenback or a v30.

[@manicmurph]

Yeah those 70/80's sound bad imo. Too much high end when I tried this Marshall origin cabinet out. Now I just have EVH cab and those Celestion's are awesome.

[@itzibitzi7611]

That's my setup😆😆 swapped the 70/80 for a greenback, also replaced all 3 preamp tubes for tung-sols. In the Fx loop i've got the tc electronic ir loader cabsim, from which you can get even more gain infront of the power section if needed😆😆🤟🤟

[@noxtommorow]

i have the monoprice labeled version of it and all it needed was the speaker broken in. its incredible for its price!

[@itzibitzi7611]

@@noxtommorow Definitly!! Awesome little combo and great pedal platform😊👍

[@strumbum946]

@@noxtommorow - I’ve read lots of people commenting on other channels saying the amp sounds MUCH better when the Celestine gets broken in. I think most speakers are like that…

[@jrg770]

The amazing thing is how Ola invented a device that can measure chug and not volume. 😂

[@joshhellstorm184]

Hell ya i been curious about them insert DOMINATION break down riff and goo..

[@KeithDautrich]

Hi Ola good sounding amp but what does it sound like with a higher master volume setting? From what I see in this video you never really turned up the master (with the exception of in the beginning when it was almost 50%) C'mon let the amp roar (I hope it does). Have a great day!

[@alexwade7449]

Omg, @5:47, I instantly forgot what this video was about. That sound made my heart stop. I had to up get up and hug my RGDIX6PB-skb.

[@HBercut]

Ola Ola, could you please find Mouse practice amplifier, which Dime use for his early lesson in 1983 while working in guitar shop and giving lessons(which was recorded on tape). It would be interesting to hear "will it chug?" :D

[@mfsoab]

Nice little amp, but personally I would still prefer a Joyo Zombie and a standalone 1x12 Box over it. Yeah, it's hybrid and 2 parts to carry, but you can be sure that it god damn CHUGGS! Pricepoint should also be similar to the HB Combo

[@reallyeffingcooltechnodude]

I agree. The HB 1x12 V30 cab with the Joyo Zombie is around 300€/$. Must be the best value chug one can get?

[@erikrummel6277]

When Ola goes “Holy sh*t?!” Like that, you know he actually is impressed. Keep on chugging Ola!!!!!!

[@IridiumZero]

Impressed with the pedal he's endorsing and selling lol no way

[@erikrummel6277]

@@IridiumZero no. My take on it was he didn’t expect the amp to be as good of a pedal platform as it turned out to be. But to each their own

[@IridiumZero]

@Erik Rummel wow the pedal he's selling can make a cheap amp sound good just in time for Christmas, no way!

[@erikrummel6277]

@@IridiumZero still not the point but ok dude, I get it, your skeptical, we got it

[@p4fizzle]

I mean, the EQ seems responsive, that's always a good thing. Writing this before I know the price, but seems like a good value starter amp

[@greasemonkey568]

The EQ is the normal Marshall tone stack, and behaves exactly as one. The preamp overall is a normal JCM800 preamp. The schematics are available online. This is a JCM800 preamp into the 2 x el84 power amp, with an effects loop that works fine (for any pedals I use on it). And, personally, I like the cheapo Celestion speaker, and the real spring reverb. I think of this as a alternative to a DSL20 (as I use it), but better, mainly due to the real reverb. The DSL20 has more widgetry, but when I want to dial and dial stuff for the fun of it, I just goto my Mesa Mark. As a turnkey combo, less can be more.

[@p4fizzle]

@@greasemonkey568 Well, being a big RATM & AudioSlave fan the JCM800 is a very special amp to me, so that definitely adds this Amp to the "RAD" category 🤟

[@marinbegovic8500]

"...aaand it's a B-Stock!" had me laughing hard! Great humour on this channel, although I am not a metal fan in any way, I'll always stop by and hear some wise words from Ola

[@CodenameCuervo]

Ouch about the ding on the guitar The amp has a little bit of mid range but it is a heavy beast with the Chug Pedal, not bad for the price though.. Seriously man the Chug Pedal kicks some serious @*$ and makes just about anything sound great!!!

[@triledink]

Finally you review it, the Monopri....Harley benton tube 15!

[@DangerFalcon]

Definitely did not realize these amps were identical haha

[@blankinfinitystudios]

if I didn't already have a laney ti-15 to play at home I'd buy this one after this "will it chug?" fucking hell! badass!!

[@johnhutchison2283]

That’s the first Time I noticed The chug meter that’s fucking awesome bro 🤘

[@randallbryant9456]

It's "GHUGGIN"...It Sounds Great without the "Distortion Pedals".🤟🎸🤟

[@matthewtyler-jones8317]

Been waiting for this one.

[@sutach]

wow, sounds very GOOD for this size and price. I think it would chug if volume was at least on 50-70%.

[@sbguitars13]

Makes me wanna get a CHUg pedal!!!

[@DoubleBarrelDarrell]

Do it!! It's so badass. 🤘

[@infn8loopmusic]

I put on my 'will it chug' shirt today and ten seconds later I see this video. 🤣🤘

[@infn8loopmusic]

Also, this is a crazy good deal on that amp! That has to be sold at or below cost.

[@wayynnee]

Hey Ola! I don't know if you'll see this comment but it'd be great to see you do a will it chug on the Harley Benton HB-40r.

[@veiga7658]

what model is that solar? It would be killer to tune once in a while Ola

[@ryotaryuu]

Been waiting for this one

[@sexychugs69247]

WOW! Cool little amp with the chug holy fuck! Yeah it chugs badass man cool vid!

[@TheOneTrueAJ]

That shit sounded pretty beautiful. I liked it before the Chug pedal. Thanks for what you do. Will be buying merch soon as well as a Solar V!

[@martinopinto6323]

What happens if you max the output? Should give some additional power amp distortion

[@rafael502]

That guitar now has battle scars, with you dropping the pedal on it lol.

[@augmented2nd666]

I love that you censor english curses, but you just said Fan like 3 times messing with your chair at the beginning LOL good job Ola.

[@primaballerina84]

Pleeeeease Revisit with a few different boosts in front!! I like the actual tone of it! It has a curvy body to it ;)

[@mikehogan6938]

I've got an old 2x12 crate 120w solid state Amp. I'd love to but a chug pedal for it. The chug has the perfect distortion sound for me

[@Anaximanderification]

I use this amp clean gain at 4 and put the TC electronics fangs on the front. It is a surprise of an amp. People, chsnge the tubes on v1 and c2, those chinese tubes on it really are capacitance loud.

[@MrSetigod]

Whe all wait when you introducing the SO)))LAR amplification!

[@therollband1290]

Sounds better than the digital amps being put out these days

[@alanredversangel]

I would probably gig with that. It's loud enough for monitoring on stage and miking up.