This is just a fun video I made a little while back and figured I would post it now since I don't have any content for you guys 🤦♂️ Trust me tho its going to get wild soon enough 💯 THANKS FOR WATCHING!!!
Пікірлер: 37
@danielflack79022 жыл бұрын
I'm in Australia and in the last year I've been given 4 of these 011 saws and then got 1 at my local rubbish disposal site. I have 3 of running so far.
@leoramirez7583 Жыл бұрын
Great work I have an 009 just got it running works like new running AMSOIL pro fuel mix to help with preserving the saw
@seanbryant57142 жыл бұрын
Sweet. I just pulled one of them from junk yard last week when I was there. I was just "collecting it" but after this video I may get her running. A month ago I pulled a husky 365xp complete. Just needed a thorough cleaning and she is running great. The stuff ppl throw away.
@AndyH-13 Жыл бұрын
Love these old, small Stihl saws. They have a sound all of their own. It’s to good to be parted out. It’s lasted 40 plus years with many more to go.
@ClintsHobbiesDIY2 жыл бұрын
Cool old saws. I love bringing them back from the graveyard.
@bodeine454 Жыл бұрын
I bought an old 015 AV and ordered a new plug for it, it also needs a new pull cord so in a day or two I'm gonna try to fire it up, it has very good compression.
@husqvarna-pit90442 жыл бұрын
Good work Greetings from Germany Peter
@tillmanfamilyfarm77596 ай бұрын
Nice. Just brought one home that I’m about to get into.
@donmayberryjrsOPE2 жыл бұрын
Great video John! I love bringing those awesome 011's back from the dead. I repaired hundreds of them in my shop in the 80s! Yup I'm that old 😂
@samharris9559 Жыл бұрын
I see you have one of them fancy coast flashlights that you have to whack to turn on
@jacobguitar18092 жыл бұрын
I see that Stevie ray Vaughan picture on the bench. My favorite guitarist right there
@chrisseger68702 жыл бұрын
Nice job! I had one and tried to tear it apart, broke EVERYTHING. Mostly cause I was young and impatient. Oop c.
@tc36032 жыл бұрын
Sounds sweet making good power as good as a new saw. Congrats
@NothingButChainsaws2 жыл бұрын
Seriously just took apart a 009 model and ported it lol...
@justinweaver87872 жыл бұрын
Very nice lil saw sir love it!!
@richardfuerst52862 жыл бұрын
👍Great video John.
@newagelumberjack2 жыл бұрын
This was awesome! What a badass little clean up. I'd run that little saw
@unharmedboss2 жыл бұрын
John, you’re the reason I’m starting to collect and work on older saws. Just saw 2 of these on marketplace now I think im gonna pick them up. So far the only brand new saw I’ve bought is a poulan pro 5020 and i feel like it’s actually an underrated saw I’m not gonna lie I’d love to see what you could do to one of them
@donmayberryjrsOPE2 жыл бұрын
Grab them! I think the 011 is the most underrated saw out there!!
@unharmedboss2 жыл бұрын
@@donmayberryjrsOPE This was first time I seen one in action it seems like a nasty little bucker!! 😂
@donmayberryjrsOPE2 жыл бұрын
@@unharmedboss you won't be bummed that's for sure!
@dennisosullivan18375 ай бұрын
Thank you Brother. ...looking to rebuild 2 011s Ive had for years. Is there a kit that is still available for these older 011s? Thanks again 👍😜
@lennie80982 жыл бұрын
Where have you been, it's nice to see you again!
@mattfleming862 жыл бұрын
That looks like boat two stroke too lol.
@aldoclausi39552 жыл бұрын
That was a good entertainment video.
@paulwilliams88715 ай бұрын
Nice video. Do you have the 200T bushing part number? i want to make that conversion on my 011 Thanks in advance.
@jwhiteker18 ай бұрын
I can get one for $100 that needs carb work. Should I roll the dice?
@Mtematiks2 жыл бұрын
Hi John. I am restoring a 260 from the trash, and I would like to ask something. It was seuzed, not badly, actually, the original cylinder is in very good shape... but there is an alluminum from the piston attached to the walls. Do you think I can remove thisby honing the cylinder DIY? Thanks man!
@jackylsmith81382 жыл бұрын
You can hone, lightly sand or depending on what coating the cylinder has some acid will dissolve the aluminum.
@moto_man43442 жыл бұрын
Hey John I just bought a 661c and a 500i. What are the must do mods for these saws be sides porting and timing advance.
@markkohlman70752 жыл бұрын
Good shit !
@whatsyourname41152 жыл бұрын
Off the subject but what is your opinion on the article package on the Stihl saws I know hand heaters but the thing I’m wondering about is the “carb heater”
@tc36032 жыл бұрын
Stihl is always worth fixing if it has compression. People don't understand the value of their throwaways.
@two-strokeworkshop1154 Жыл бұрын
Port it and put nos on it 😂😂 I’m just kidding do what you want
@johnburns47263 ай бұрын
I have a stihl 011 AVT it was my grandfather's, can you get it going for me, I have found all the parts on ebay😊
@Living-The-Dream Жыл бұрын
I’m restoring a 011 AVT now, trying to clean it all up. I can not get the handle off. The left side handle screw cam right out. The right hand side turns and turns but will not come out. Is there some special way to remove, or a certain order to remove screws to get it apart? HELP, Please ??????
@naturundhund2 жыл бұрын
Schöne Säge.... Greetings from Germany Peter kzbin.info/www/bejne/g2HCiZ9rZ7eVqbs