Will it Start? 9,000 RPM B16B Swapped EF Civic - EP3

  Рет қаралды 69,352

Speed Academy

Speed Academy

Күн бұрын

Пікірлер
@JTheMoneyable
@JTheMoneyable 11 ай бұрын
I find comfort in knowing that I’ve also got you guys every Saturday morning. The guys from Gears and Gasoline are wrapped up and unable to upload but my favorite Canadians made it!
@Loc-Gnar
@Loc-Gnar 11 ай бұрын
Haha it’s like Saturday cartoons as an adult first G&G then SpeedAcademy. Definitely a great combo to start the weekend!
@gwagb27
@gwagb27 11 ай бұрын
Exactly
@phunkdoctaspock
@phunkdoctaspock 11 ай бұрын
Agreed, but I quit watching G&G years ago. Those dudes are trash.
@Loc-Gnar
@Loc-Gnar 11 ай бұрын
@@phunkdoctaspock that’s to bad. Why do you say that?
@deciplesteve
@deciplesteve 11 ай бұрын
Speed Academy and Crucible Coachworks make my Saturday mornings amazing.
@rictorkooldude10
@rictorkooldude10 11 ай бұрын
I love that you guys use cats in your cars. Modern high flow cats are super efficient and lose little to no power. Plus it keeps the feds happy haha
@jp2246
@jp2246 11 ай бұрын
Agree!
@petec2583
@petec2583 11 ай бұрын
They also turn gases which are not great for humans but basically harmless to the climate... into yet more carbon dioxide. Which is harmless to humans, but, um, yeah... 😂
@MyWolffy
@MyWolffy 11 ай бұрын
Keeping the CAT on a Honda engine is NECESSARY to avoid rasp! Most people don’t know or believe it but I’m a firm believer in it.
@seattlejdmcivic
@seattlejdmcivic 11 ай бұрын
Yes and no....... that is definitely true and the easiest way to avoid it but...... CHECK THIS OUT It also depends if you're doing a street build or track build.... I built over 30 Hondas since the early 2000s and.... I will say that now that we don't have cat on my built 95 Civic coupe or my 04 Honda Accord V6 6-speed manual coupe hfp Honda factory performance package with full bolt ons tuned IF YOU'RE GOING TO DELETE THE CAT...... The key is to getting a really really nice good custom exhaust built or even something like a yanaka exhaust may help keep some of that rasp down BUT A VIBRANT RESONATOR IS A MUST!! Now it's something like the V6 Accord you have to go no cats if you want to make power because they come with three cats from the factory and when you do the pre-cat deletes and then the j pipe that deletes the third cat it's basically like a header when you do all three of those things it really makes a significant difference in power compared to running high flows or keeping the cats on Now on my 95 Civic coupe when it was a fully built all motor d-series pushing almost 200 hp at the wheels yes I know it's crazy most people don't do that with an all motor d-series but believe me it is possible (seen people push even higher) that car I don't necessarily have to delete the cat but when I was running the d-series build every little bit counted especially when I came to my 4-1 header and custom exhaust was trying to get every horsepower I got out of that motor Now that it is and all motor k series with a k24 block and a K20 head I don't necessarily have to go decatted header but it didn't make a little bit more on the dyno with it that way The main way I say to do it is if you're going to run without a cat you're going to have a header and you're going to have a full exhaust the best way to avoid rasp is to get yourself a nice custom exhaust build and then do a really good vibrant resonator promise you that thing won't be raspy if you do it right But if you're just looking for a simple day-to-day build like maybe and take it as exhaust on it then yeah keep the cat man you avoid the rest and it's a lot easier that way I just don't mind taking it off because we took away emissions here in Washington state a few years back when we met the requirements of the EPA And honestly my 95 Civic coup e when it was still a semi Built d-series not even fully yet I PASS EMISSIONS WITH FLYING COLORS with NO CAT cold air header full 2.5 inch exhaust skunk 2 intake manifold and throttle body built head I remember watching something a long time ago that Honda actually built their cars to run clean enough that you didn't need catalytic converters that was the thing that America wanted to do and Honda referred to catalytic converters as putting scrubbers on your exhaust for cars that pollute a lot to try to cover up the fact that the American cars polluted a lot instead of just building an engine that ran clean enough that you didn't need one Sorry for the long comment dude
@casefc3s
@casefc3s 11 ай бұрын
That exhaust note is a breath of fresh air compared to what I'm used to hearing xD
@nobel_del_mar_racing
@nobel_del_mar_racing 11 ай бұрын
The Digidizzy is a great aftermarket coil on plug setup!
@princesssolace4337
@princesssolace4337 10 ай бұрын
over where I'm at, we go for K20 oem COP when ditching the old distributor, from b16 to 4g63T and watever in between
@TheMikeguy7776
@TheMikeguy7776 11 ай бұрын
Thinking about all the channels I just realized this is a perfect blend of donut and vtec academy. High production and personality meets actual knowledge and skill. Hope you guys hit 1m subs soon, you deserve it
@brokensmilephoto
@brokensmilephoto 11 ай бұрын
There content is original, not just a clip show basically from other people like Donut tends to be.
@earnestbunbury2103
@earnestbunbury2103 11 ай бұрын
Their*@@brokensmilephoto
@snoofayy6150
@snoofayy6150 11 ай бұрын
​@@earnestbunbury2103*They're
@camerongrady580
@camerongrady580 11 ай бұрын
The dragonfire distributor is manufactured by AIP Electronics. The guts of their standard replacement distributors are identical to the dragonfire units, just without the super loud red powder coat on the body. I have confirmed this directly with the manufacturer. The quality is outstanding. I've run one for several years.
@speedacademy
@speedacademy 11 ай бұрын
Do you have a link to the non performance ones. I hate the red color and want a more oem look.
@spencersgarage
@spencersgarage 11 ай бұрын
I had one of the AIP Electronics distributors on my daily driver EF. It lasted 3 years/64K miles, then it failed and left me stranded on the side of the highway.
@pull-up-onmeh5138
@pull-up-onmeh5138 11 ай бұрын
@@speedacademyhave you ever considered coil on plug? @Digidizzy has a good one ☝️
@camerongrady580
@camerongrady580 11 ай бұрын
@@speedacademy yep, I'll send it to you.
@alonsocristan5458
@alonsocristan5458 10 ай бұрын
​@camerongrady580 the aip dohc vtec distributors are out of stock
@sethallison5682
@sethallison5682 11 ай бұрын
I’m impressed. For anyone who’s tried, keeping a full size radiator AND a fan AND A/C on a b series swap with a header is NOT easy on an EF. It gets TIGHT. I’m saving this video because I’m going to try that plm header.
@DB15690
@DB15690 11 ай бұрын
I run the plm header with my b16b swap and a full size skunk 2 rad with a slim fan.
@Serpentis666
@Serpentis666 11 ай бұрын
Digidizzy is an excellent solution for a distributor… not the cheapest solution, but of all the cop kits it’s probably the best…
@shredtheknoll3357
@shredtheknoll3357 11 ай бұрын
the digidizzy conversion is a really cool option. It converts to coil on plug
@gouldnj
@gouldnj 11 ай бұрын
I love watching videos like this, and even though I know KZbin pays the bills and you have sponsors, I would love it if you popped a price up in the corner every time you said “we went ahead and ordered up a blah, blah, blah”. I built a 1989 CR-X Si with USDM B16B for my son during Covid. With lots of parts from jdmlegends and other sources like the ones you used, a garage restoration was over $35k all in. A lot of young guys watching your videos think “affordable” means cheap and it REALLY isn’t so it would be a good reality check.
@apexbryle
@apexbryle 11 ай бұрын
Digidizzy for the distributor!
@ominousg2
@ominousg2 11 ай бұрын
Comment I was looking for
@nizsimo
@nizsimo 11 ай бұрын
Was about to suggest the same! 👌🏽
@gilly110
@gilly110 11 ай бұрын
perfect timing for morning car-toons
@Brandon-C.
@Brandon-C. 11 ай бұрын
In my 30s, and have had a 90s civic every 3 years or so since I learned to drive. I think I'm due again. The winter conditions are a real bummer 🇨🇦
@NightWalkerasd
@NightWalkerasd 11 ай бұрын
To replace the distributor you can go with a DigiDizzy that is a full one replacement for the oem distributor with all new parts. If not, you can go with the OEM one and a COP convertion kit to remove all the components of the distributor but just leave the sensors in place for the signals that the ECU needs.
@cliby25
@cliby25 11 ай бұрын
I was wondering why they didn't do the C.O.P setup.
@NightWalkerasd
@NightWalkerasd 11 ай бұрын
@@cliby25 Well if there are some stand alone COP convertion kits that you don't need to modify the ECU but some others you need to actually add a board to the ECU, looking on their P72 they have a knock detection board that goes on the conector that is usually use for the COP boards. So they could use the Hondata one that is external and it connects to the S300 board, and just remove the coil, ignition module and rotor from the distributor. The main drawback is price, not sure if they have a built limit on their builds, I don't think so but that might be a good option to ensure they have a good spark if they want to push the rpm limit.
@craigsawyer6453
@craigsawyer6453 11 ай бұрын
Rebuilt my distributer a year ago and OEM parts were very hard to come up with. I did it, but don't think I will be able in the future. It is so great to see the options - great community!
@cliby25
@cliby25 11 ай бұрын
@@NightWalkerasd yes I agree with u on the build budget. Thought of it after the comment. Thanks for the info same way
@ryanmott9550
@ryanmott9550 11 ай бұрын
Love the little funny bits you throw in, got me chuckling every Saturday morning. Thanks so much for this quality content and your enthusiasm for these vintage Hondas 😄
@darrylcavanaugh9465
@darrylcavanaugh9465 11 ай бұрын
My version of Saturday morning ‘car’toons. Great combo on the EF.
@Pyrosalo
@Pyrosalo 11 ай бұрын
Saturday morning car-tune inspiration. That’s what I need in my EF. Good job guys.
@Pro4yu
@Pro4yu 11 ай бұрын
SAME✅
@HayabusaWorld
@HayabusaWorld 11 ай бұрын
Absolutely love your channel guys. And I must say it’s so nice to see work done right!!! Keep up the awesome work Speed Academy
@nightsarmament
@nightsarmament 11 ай бұрын
This series really has me yearning to drive my ITR. Spring can't come soon enough.
@FG2-K24A
@FG2-K24A 11 ай бұрын
Absolutely loving these Honda builds! ❤👍
@hungryalien
@hungryalien 11 ай бұрын
the ef is coming along nicely. sounds great too!
@aDaWaN
@aDaWaN 11 ай бұрын
Love the editing on this one, especially the quick intro with the history of the project make it joyful to watch. I also love the longer sections with wrenching and music. Keep it up like that!
@barrymonroy7138
@barrymonroy7138 11 ай бұрын
Best Honda Civic swap 👌 I've ever seen 👏
@ifgezroxy
@ifgezroxy 8 ай бұрын
Aww man. KZbin haven't been giving me notifs of new Speed Academy videos for a while now, and I was so happy to see you guys still provide the best automotive content in KZbin! I have lots of catching up with your videos and I'm 100% okay with that.
@jench78
@jench78 3 ай бұрын
so glad i watched this. I thought I was the only one having so much trouble with these distributors. Glad for the comment section and I'll be looking into COP and AIP
@benendres2122
@benendres2122 11 ай бұрын
Yyeesss drink my morning coffee with the Speed Academy boys!!
@Doodooheadguy-fishing
@Doodooheadguy-fishing 11 ай бұрын
Speed Academy is keeping my car dreams alive. This is the car ive wanted to build since HS. It sounds so damn nice
@superfast30
@superfast30 11 ай бұрын
The 90's and early 2000's represent peak Honda high revving N/A VTEC development. What an era. It was an amazing time to have been part of the car scene here in Toronto during that era. I was VW guy but appreciated what Honda was putting out. Many of the muscle car guys at the time weren't to familiar with VTEC. The looks on some guys faces when they first heard a DC2 ITR with an AEM cold air hit its VTEC crossover was priceless. Love your content. Keep up the amazing work!
@jrg116
@jrg116 10 ай бұрын
That B16B looks so good. I bet this will be really fun to drive. I need one!
@onscreenstudio7070
@onscreenstudio7070 11 ай бұрын
I love that you guys keep cats on whenever you can.
@ReignitedAuto
@ReignitedAuto 11 ай бұрын
Always appreciate the clean work you guys do 👏
@TonysTechAndCars
@TonysTechAndCars 11 ай бұрын
Thats stunning guys.... truly a lovely, clean build
@OrangeChicken417
@OrangeChicken417 11 ай бұрын
These guys put out the highest quality and entertaining car videos. No bro vibes like Donut and all the other channels. I only trust these guys, AHC and vtec academy.
@1stGenCRXs
@1stGenCRXs 11 ай бұрын
That exhaust is so stealth looking! Great job, it’s alive!
@babaarcuszatir
@babaarcuszatir 11 ай бұрын
I can hardly wait for the upcoming episodes, lovely cars, nice guys, great show.🙂
@colinmcdonell5034
@colinmcdonell5034 11 ай бұрын
Can't wait to see it on the dyno. I would throw a LHT performance Jackson Supercharger kit with intercooler. It would fly. Great build Dave and Kevin.
@brokensmilephoto
@brokensmilephoto 11 ай бұрын
For Dizzies I've always had good luck rebuilding them with some of the sensors from the cheap ones. Basically use as much as OEM as possible. Had to do this recently with a EG civic speed sensor. Kept the OE housing, and swapped the guts because the chinesium housing cracked.
@waltersmith3165
@waltersmith3165 11 ай бұрын
Another great episode gents! The car sound really good with that exhaust.
@VibrantPerformanceTV
@VibrantPerformanceTV 10 ай бұрын
Sounds great! Can't wait to see these rip!
@misaelgonzalez167
@misaelgonzalez167 11 ай бұрын
Must say one of videos i have been waiting. I had a EF a few years back that needed a engine swap but never found good hearted pips to help with build. Atleast i can see another EF happy and in great hands ..sounds amazing .💨💨👍🏻👍🏻😇
@Busydadgarage717
@Busydadgarage717 11 ай бұрын
Success! Congrats on the healthy motor! Cannot wait to hear it hit VTEC for the 1st time.
@retrophil8241
@retrophil8241 11 ай бұрын
Thanks from Northern Ireland. Great channel guys, keep the Honda content coming
@Bob_Sacamano69
@Bob_Sacamano69 11 ай бұрын
That thing sounds so lovely, I can't wait until we hear that thing open up!
@Syscrush
@Syscrush 10 ай бұрын
I'm really happy to see you making the effort to have a catalytic converter on there.
@jacoblacroix9024
@jacoblacroix9024 11 ай бұрын
Car sounds great and strong! Exhaust sounds really good ! Great job guys can’t wait to see what comes next !
@michaelr5545
@michaelr5545 11 ай бұрын
You guys are killing it! Loving the series so far
@drenomix
@drenomix 11 ай бұрын
Digidizzy hands down #1 solution 💯💯💯
@CiscoDA9RS
@CiscoDA9RS 11 ай бұрын
Just got with a digidizzy! It replaces the distributor for a digital one with coil packs!!!
@turbo_brian
@turbo_brian 11 ай бұрын
It feels weird watching speed acadamy without watching gears and gasoline first.... My saturday is all thrown off... lol
@m4xripper
@m4xripper 11 ай бұрын
same gears and gas didnt upload :(
@aldhydarmayo
@aldhydarmayo 11 ай бұрын
this channel deserves more viewers!! absolutely loving this series, keep it up guys
@throughmyeyesmedia6492
@throughmyeyesmedia6492 2 ай бұрын
Very clean Ef build with the b16, Love the red valve cover, it stands out with the car being white.👌🏽
@BRICKHOUSESPL
@BRICKHOUSESPL 11 ай бұрын
I'm on a "rebuilt in Japan" reman distributor. I'm not sure where they source the parts but it has been solid for over a year and has a warranty. Obviously easier to get since I'm in Japan, but these might be the mid price option even including international shipping. They're more expensive than used OEM or new Rock Auto but cheaper than DigiDizzy, which is probably what I would have done with better timing and more money in the bank. Probably the route I'll go if this one dies. Keep up the good work - it's coming together amazingly!
@jwdebod01
@jwdebod01 10 ай бұрын
With regards to the drilling, i found holding the battery against your body to stop the drill ripping around, it helps the drill break through the point that makes it grab cause it keeps the bit rotating instead of spinning the drill itself
@AnotherMotorist
@AnotherMotorist 11 ай бұрын
B is the way. Vibrant dual tips looking right
@aMcConghie16
@aMcConghie16 11 ай бұрын
Best auto channel on KZbin, keep it guys!
@earnestbunbury2103
@earnestbunbury2103 11 ай бұрын
Er...
@benjamindavidson632
@benjamindavidson632 11 ай бұрын
Coil on plug conversion boys! Cheaper, better looking unless you want the real OEM look.
@speedacademy
@speedacademy 11 ай бұрын
Its the way to go but certainly not cheaper. Its double the price.
@omarsoto8896
@omarsoto8896 11 ай бұрын
Looking forward to the suspension work on this!! 👍🏽
@joseochoa5432
@joseochoa5432 11 ай бұрын
Coil on plug conversion is the best dizzy replacement
@vtectroy1073
@vtectroy1073 11 ай бұрын
I’ve been running an O’reilly distributor on my daily driven B Series for almost 3 years now. Recently had the CKP inside the distributor fail but was able to easily exchange it with the lifetime warranty.
@rynev3392
@rynev3392 11 ай бұрын
Looking forward to seeing it on the dyno, something so satisfying about hitting vtec in a B series EF
@bolovesimon98
@bolovesimon98 11 ай бұрын
Great episode!
@ConiferConnoisseur
@ConiferConnoisseur 11 ай бұрын
Awesome video! Excited to see this thing rip!
@LeaningLow813
@LeaningLow813 11 ай бұрын
Perfect time to convert it to coil plugs since your going boost. It will eliminate the issue of finding distributors as well
@fifaaddict101
@fifaaddict101 11 ай бұрын
The exhaust sounds so good
@rorodesignspowdercoating
@rorodesignspowdercoating 11 ай бұрын
The exhaust sounds amazing !!
@JohnnieIsBored
@JohnnieIsBored 11 ай бұрын
Digidizzy distributor are also good which eliminates the old school style distributors.
@Pro4yu
@Pro4yu 11 ай бұрын
EF FOR THE WIN 🏆 ✅.. 1CLEAN BUILD 🤙🏽
@hinsonian
@hinsonian 11 ай бұрын
There are some sweet coil-on-plug kits for B series!
@alexelrod242
@alexelrod242 11 ай бұрын
Most people are ditching the distributor all together since there are kits out there to convert to COP with a factory ecu, like burton racing, or digidizzy
@CarlosLopez-iy6jr
@CarlosLopez-iy6jr 11 ай бұрын
For b series with working ac the best is the rmf narrow it’s the exhaust manifold that overheats the ac compressor the narrow collects towards the transmission to disperse heat away from the ac compressor
@teddiazjr.6223
@teddiazjr.6223 11 ай бұрын
Choice plus from eBay works well/ installed five of them with zero issues
@jdmda1000
@jdmda1000 11 ай бұрын
I like plm headers definitely. But another good fitting header is the skunk 2 alpha header it has really good ground clearance on EF chassis.
@benmiller9854
@benmiller9854 11 ай бұрын
Awesome video
@TheMindfulSkater
@TheMindfulSkater 11 ай бұрын
My Saturday morning go to. I look forward to this.cheers
@BushidoPhoto
@BushidoPhoto 11 ай бұрын
SPAL fans are awesome!
@RobinVaessen
@RobinVaessen 10 ай бұрын
B swapped Ef's rock! Glad I did
@princesssolace4337
@princesssolace4337 10 ай бұрын
The EF SiR was my dream car back in 90 .... but never went for it. Maybe bcoz my mom got the 88' sedan and my sister got the 90' Civic Profile and 60% of my mates got the EF SiR. I went for a 86' G11 Daihatsu Charade Turbo with DeTomaso OEM bodykit ... engine swap to 92' G100 Daihatsu Charade GTti, CB90 Twin Cam 12valve DOHC Intercooler Turbo. It was my 1st ever factory turbo hot hatch.
@calebz5890
@calebz5890 11 ай бұрын
I got so excited watch you get that D series all lubed up. Especially that OE+ red gasket! lol Just listen to her purrr
@DistortedApricot
@DistortedApricot 9 ай бұрын
open the valve to prime the hose with coolant while its pulling vacuum then close it as soon as the coolant reaches the tool. allow the vacuum to continue to pull. that way when you open the valve there is no air going into the system.
@Brock_Landers
@Brock_Landers 11 ай бұрын
I had a cheap eBay short shifter in my fully built turbo EK coupe and I bought a K-tuned shifter, TOTALLY different and SO much better and more precise shifts with solid aluminum bushings.
@brandon_buildsDIY
@brandon_buildsDIY 11 ай бұрын
Use this as the @speedacademy & @mightycarmods collab button. I don’t care if it happens in 2030. We need this!!!!
@mwelke90
@mwelke90 11 ай бұрын
You could use DigiDizy as a plug and play alternative over the stock Distributor.
@MyWolffy
@MyWolffy 11 ай бұрын
Only Honda blue filters should be used on such a legendary engine !!!!
@scottibass
@scottibass 11 ай бұрын
I had the same type exhaust in my civic. The AC line touched the headers while driving and blew refrigerant and ac oil everywhere. It was quite a shock 😂
@Underrated_civic
@Underrated_civic 11 ай бұрын
also maxspeeding rods has a $100 traction bar that fits great
@erikfreeman4620
@erikfreeman4620 11 ай бұрын
You need a innovative cross member/ traction bar . Gives you way more header clearance
@damonblalark766
@damonblalark766 11 ай бұрын
Yes the dragon is good I’m running it on my b16👍🏽
@krautworks
@krautworks 10 ай бұрын
Dragon Fire Distributors sure sound gaudy from their brand name, but I can attest that they are very high quality! The only reason I even bought one is because they meet the IATF standard, in the first place. See, I had my OEM dizzy fail on me half a year ago, but I bit the bullet and bought one of theirs for my D-Series (booo, I know) and it works flawlessly. Apparently, their dizzies either work perfectly straight out of the box, or they are dead on arrival. So, if any of you buy one and it's DOA, just RMA it and you should have better luck with the next one.
@pFbSpecV
@pFbSpecV 11 ай бұрын
Sounds good!!! I wanna hear that vtech hit!
@NotoriousZNT
@NotoriousZNT 11 ай бұрын
sounds amazing
@AllenSpec
@AllenSpec 11 ай бұрын
Am I the only one who mistook EP3 which means episode 3 for the Civic EP3 😂 and got even more excited
@cruz_control3925
@cruz_control3925 11 ай бұрын
Great content! The lack of quality b-series ignition (distributor) options is leading to more people converting to COP conversions these days.
@MrGrentch
@MrGrentch 11 ай бұрын
Great, fun and informative vid as usual. 🙂One thing does puzzle me(and you guys wouldn't be the only ones to do it) ; why use a B16 instead of a B18? They're the same size dimension wise(VTEC = Very Tall Engine Construction😁), so face the same issues or not with installation. However the b18 has more usable power and torque and the R versions are going to be more common too. Back in the day I had a loaner EK9 R for a while and yes it was a screamer with a great chassis, but tbh(and IMHO of course) screamer summed it up. You had to drive the bag out of it to get anything but noise and too often it fell outside of the higher cam range between gears. It was just harder to exploit that great chassis. That same car blew its engine(wasn't me😀) and the owner got a b18c and gearbox and dropped that in(this was before K swaps being a thing and because it was cheaper than a rebuild, the B16 was essentially thrown away. How times change). It transformed the car. It was much easier to live with as a daily type car and noticeably perkier and easier to exploit when 'pressing on'.
@Clark_R
@Clark_R 11 ай бұрын
DA works, you just have to get for a 92-93 GSR as it is VTEC and uses a B16.
@jle562
@jle562 11 ай бұрын
The 92-93 gsr is actually a b17a
@k20ee96
@k20ee96 11 ай бұрын
Would highly recommend ditching the OE cross member in favour of an Innovative traction bar, it massively improves the front end response on the EF and gives a ton more clearance
@CraaaigV302
@CraaaigV302 11 ай бұрын
Yeas the dragonfire distributors are the best ones u can get the next best from that would be going Coil On plug
@MrSneakA
@MrSneakA 11 ай бұрын
Solid T-rex bod!
@wilayala11
@wilayala11 11 ай бұрын
You can use the rad hoses from a 92-93 integra gsr b17a1.
@_Erogaki
@_Erogaki 11 ай бұрын
I know this build is run on a budget but a coil on plug conversion is worth it imo.
READY For VTEC To KICK IN! - EF Honda Civic B16B Build - EP 4
27:47
Speed Academy
Рет қаралды 72 М.
Cheerleader Transformation That Left Everyone Speechless! #shorts
00:27
Fabiosa Best Lifehacks
Рет қаралды 16 МЛН
Гениальное изобретение из обычного стаканчика!
00:31
Лютая физика | Олимпиадная физика
Рет қаралды 4,8 МЛН
coco在求救? #小丑 #天使 #shorts
00:29
好人小丑
Рет қаралды 120 МЛН
The Malcontent: Scotty Fenn's Self-Destruction In Drag Racing
48:14
EF Honda Civic B16B VTEC Build - Its FINISHED!
28:14
Speed Academy
Рет қаралды 94 М.
Discover the Budget Media Vehicle That's CHANGING the Game! - RD2 CRV
7:19
AW MEDIA Productions
Рет қаралды 11 М.
Bigger Engine.
2:03:51
SimonFordman
Рет қаралды 334 М.
90's Honda Greatness - VTEC vs Turbo // Roll Races & Track Battle
21:08
TurboCharging an EG Honda Civic  - NOT AN EBAY TURBO KIT!
29:11
Speed Academy
Рет қаралды 215 М.
I FINALLY Built the Perfect SPEC E34 BMW M5 (Bought for $8K)
22:40
Speed Academy
Рет қаралды 54 М.
Cheerleader Transformation That Left Everyone Speechless! #shorts
00:27
Fabiosa Best Lifehacks
Рет қаралды 16 МЛН